Overview CHAFFOTEAUX ALIXIA GREEN 25 S LPG EU CONDENSING CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT -NEW ErP Technical specifications Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Features of exercisesHEATING: Energy Category: Condensation Nominal Thermal Output mx/min (Hi): 22 / 5.5 kW Outlet temperature range min/max temp High: 35/85 Cø Outlet temperature ranges min/max temp High: 20/45 Cø Capacity of the expansion vessel: 8 litres Maximum water capacity of the system Features of exercises DOMESTIC HOT WATER: LevelComfort DHW (EN 13203): *** Hot water flow rate at T 25ø: 14.5 l/min Hot water flow rate at T 35ø: 10.4 l/min DHW temperature range: 40/65 Cø EMISSIONS: Minimum suction: 137 Pa Excess air: 27% Nox class (Nox PonderatMg/kWh) G20: 5 ELECTRICAL DATA: Supply Voltage/Frequency V/Hz: 230/50 Max Supply/Gas Pressure: 20 mbar DIMENSIONS AND WEIGHT: Height x Width x Depth mm: 745 x 400 x 307 ; 32 kgs Main features ÿALIXIA GREEN 25 YES The new compact condensing boiler with stainless steel condensing exchanger and prepared for connection to a heating system via the Ebus communication protocol. Can be installed in partially protected places. OperationsolGPL. Sanitary comforts Sanitary heat exchanger in stainless steel. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard Flow rate from 14.5 to 19.3 l/min with T = 25 Cø Heating comfort Efficiencyfinal 109% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. Modulation wide range, from 25% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperatureÿ Arrangement for integration into a heating system via the Ebus communication protocol Backlit LCD display with display: history, self-diagnosis, operating temperatures Convenience of installation use Compatible with Expert Control:ÿintuitive system manager for the management of 3 circuits, depending on the ambient and/or outside temperature for greater comfort and greater energy savings Intuitive electrical connections Easier starting: the automatic purge function and directly accessible combustion adjustment Can be installed in partially protected places ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Final 25% energy savings in combination with Expert Control and the SRA function Final 35% energy savingscombinandExpert Control, SRA function, external probe and radiant floor 40% reduction in CO2 emissions Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

FERROLI BLUEHELIX PRO 32C LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT -ErP Technical features Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Thermal input (PCI) Max Heating: 29,5 kW Thermal capacity (PCI) Max Sanitary: 32 kW Thermal power 80°C-60°C Max Heating: 28.9 kW Thermal power 80°C-60°C Max Sanitary: 32 kW Useful thermal efficiency 80°C-60°C: 98% Useful thermal efficiency 50°C-30°C: 106% Domestic hot water production Δt 30°C: 15.3 l/min Domestic hot water production Δt 25°C: 18.3 l/min Energy certification (92/42 EEC): **** Degree of protection: IP X5D Extremely compact dimensions (hxlxp): 600 x 400 x 320 mm; 31kg Power supply: CNG or LPG BLUEHELIX PRO Wall-mounted condensing boilers, premixed sealed chamber with instantaneous sanitary production New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production. Designed to guarantee maximum energy efficiency in heating and in the supply of domestic hot water, thanks to the new patented bivalent exchanger in AISI 316 TI stainless steel. This new exchanger integrates the heating circuit and the production of domestic hot water in a single element, pushing the phenomenon of condensation to the maximum. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. The range: Bluehelix Pro is available in 2 models, both running on methane and LPG. Both the 25C model and the larger size, 32C, offer large volumes of domestic hot water, quickly, which can be further reduced by activating the "Comfort" function Strengths: Primary heat exchanger in thick AISI 316 TI stainless steel with integrated DHW production (dual stainless steel heat exchanger). Patented High yields both in heating and in sanitary production Total premix burner in stainless steel Digital control panel Electronic flame modulation both in heating and DHW Can be combined with the modulating remote timer control Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Refined design and compact size Casing painted white by anaphoresis with epoxy powders Advantages : Exchanger with "SELF-CLEANING" function which reduces limescale deposits inside the DHW circuit High yields both in heating and in sanitary production Ease of access to internal components for any maintenance ECO function in DHW for greater savings in the period of low use of hot water Maximum comfort certified 3-star in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe High efficiency modulating heating pump (Erp Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Protection index IPX5D, equivalent to excellent electrical protection of the boiler from liquids and foreign bodies Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center Appliance belonging to class 5, the most ecological required by European standards (UNI EN 297 NOX and 483) Products that fall under the tax breaks provided for by the Finance Law in force Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the dispensing of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: By installing the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. "SELF-CLEANING" function: Thanks to the "spiral" shape, the passage of domestic water inside the exchanger produces a "centrifugal" self-cleaning effect on the internal walls which tends to remove any limescale deposits. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code: 3310501 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat output max/min heating (Hi) Qn 22/2.5 kW Useful heating power 80º C/ 60º C max/min 21.5/2.4 kW Efficiency at 30% of nominal power (47 Hi return) 97.8% Maximum heating pressure/safety valve setting 3/3.0 bar Capacity of the expansion tank 8 l Performance Stars **** Sanitary max/min rated thermal power (60/80ºC) PCI 25/ 5.5 kW Sanitary specific flow rate in compliance with EN 625 at Δt 30ºC 13.2 l/m Hot water flow rate at ∆T 25º C l/m 14.6 NOx class 5 Electrical protection degree IP X5D Dimensions: HxWxD 745 x 440 x 375; 42 kgs General characteristics URBIA GREEN LINK EU Reliable, designed to guarantee the best performance with minimum consumption and easy to manage, even remotely with your smartphone: Urbia Green Link by Chaffoteaux is the latest novelty in the field of efficient heating. Not a simple condensing boiler but a real advanced package that combines the efficiency of the new Urbia Green EU with the connectivity kit that allows the control and management of the entire system. A solution that reduces consumption by up to 40% * and obtains the advantageous tax deductions of 65% , envisaged for the purchase and installation costs of home automation systems and therefore concerning the cost of the boiler but also that of accessories and labour. In this way, just over two years are enough to recover the investment linked to the new heating system. The brain of the Chaffoteaux system is represented by the Expert Control Link chronothermostat, powered directly by the boiler and connectable to the Wi-Fi network to activate the assistance and remote control functions. It is thus possible to manage the switching on and off and the regulation of the main functions with the dedicated Chaffolink App but also to activate a remote assistance service for scheduled maintenance, remote repairs and real-time notification of any problems. In the event of a malfunction, the technician who will work on the boiler will always know the real problem in advance and the time needed to solve it, thus avoiding unnecessary site visits. The monitoring of daily, weekly and monthly consumption - from Expert Control or directly from the App - also allows you to check how much energy is used for heating and how much for domestic hot water, thus optimizing boiler management. Among the pluses of Chaffoteaux technology: the 4-litre micro-accumulator , which makes hot water immediately available, a constant report of energy consumption and the SRA function for automatic regulation of boiler parameters based on environmental conditions. Chaffoteaux Urbia Green Link is available in versions with 25 and 35 kW condensing boiler. > HEALTH COMFORT Integrated mini-accumulator in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with ΔT = 25ºC. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very limited. DHW programmer to control the tank heating time slots Eco-Delta System: DHW filling system with 4-litre reserve to further improve the comfort of DHW production and new ecological functions which allow energy savings in DHW mode. > MAXIMUM COMFORT IN HEATING Through the free APP and the connectivity service you can constantly monitor the room temperature and manage the boiler parameters. Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency according to EN 92/42 standard. Wide modulation range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Heating circuit pressure sensor with visualization on LCD display. SRA function, automatic boiler regulation system according to heating requirements. Differentiated climatic thermoregulation of 2 circuits, according to the ambient and/or external temperature. Arrangement for integration into a heating system via the new Ebus 2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. > COMFORT OF USE AND INSTALLATION Standard Expert Control : intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier starting: automatic purge function and directly accessible combustion regulation. > CONSCIOUS CONSUMPTION, ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Weekly, monthly and yearly analysis on your smartphone . Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information that allows for comparisons on the performance and energy consumption of the product you wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; technical data sheet of the system with the parts relating to the product or system already completed. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: all appliances and/or systems have their respective labels and make sure that they are clearly visible; all devices and/or systems are always accompanied by the mandatory technical data sheets; any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP) : The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview FERROLI BLUEHELIX TECH 35C CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP 2015: Wall-mounted condensing, premixed, sealed chamber boilers with instantaneous domestic hot water production with double exchanger. IN THE ABSENCE OF THE PRODUCT, THE NEW MODEL BLUEHELIX RRT C 34 WILL BE SUPPLIED, which can be viewed at this link: https://www.climaconvenienza.it/it/caldaia-a-gas-ferroli-bluehelix-tech-rrt-34c-metano-o-gpl-completa-di-kit-scarico-fumi-new/ Technical specifications Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXXL Class A Characteristics of heating/sanitary exercises: Sealed chamber condensing boiler Thermal input (PCI)ÿMax Heating: 32 kW Thermal capacity (PCI)ÿMax DHW: 34.8 kW Heating power 80øC-60øCÿMax Heating:ÿ31.4 kW Thermal power 80øC-60øCÿMax Sanitary:ÿ34.1 kW Thermal efficiencyÿ80øC-60øC: 98% Useful thermal efficiencyÿ50øC-30øC: 106.1% Efficiency termicuseÿCaricridott30%: 108.8% Domestic hot water productionÿt 30øC: 16.3 l/min Domestic hot water productionÿt 25øC: 19.5 l/min Energy certification (92/42 EEC): **** Degrees of protection: IPX5D Extremely compact dimensions (hxlxp): 600 x 400 x 320 mm; 31kg Power supply: LPG Features list BLUE HELIX TECH Wall-mounted condensing boilers, premixed sealed chamber with instantaneous sanitary production New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production. Designed to guarantee maximum energy efficiency in heating and in the supply of domestic hot water, thanks to the new bivalent exchanger patented in AISI 316 TI stainless steel. This new exchanger integrates the heating circuit and the production of domestic hot water in a single element, pushing the phenomenon of condensation to the maximum. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. The range: Range made up of two models, respectively 27 and 35 kW, running on LPG, LPG, propane air. Strengths: Boiler body with patented high performance primary heat exchanger in AISI 316 TI stainless steel Instantaneous production of domestic hot water with a dedicated plate domestic hot water exchanger Total premix burner in stainless steel Digital control panel Electronic flame modulation in both heating and DHW Can be combined with the modulating remote timer control Large graphic multifunction display with backlighting for easy and correct setting of the parameters Standard by-passÿ Refined design compact size Casing painted white by anaphoresis with epoxy powders Advantages : ÿECOÿfunctionin sanitaryware for greaterÿsavingÿin the period of low use of hot water 3-star certified comfort in sanitary production according to EN 13203 Sliding temperature operationÿby means of an optional external probe Low-consumption modulating heating circulator (Erp Ready - Class A):ÿRegulation 622/2012 requires that all boilers placed on the market from 1 August 2015 be equipped with a low-consumption circulator, otherwise defined as class A. This is a decision that starts from consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, or by analyzing the impact of the low-consumption circulator integrated in the boiler, this reduces the total electricity consumption of the generator by 30%. Digital flame monitor with three re-ignition attempts in the event of blockage due to lack of flame detection (LPG model) Predisposition for solar systems:ÿpredisposed for the production of domestic hot water combined with solar panel systems Place of installation:ÿalso for outdoorsin a partially protected place up to -5øC as standard and up to -15øC with the aid of the optional antifreeze heater kit Operation certified also with propane airÿ (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center Appliance belonging to class 5, the most ecological required by European standards (UNI EN 297 NOX and 483) Products that fall under the tax benefits provided for by the Finance Law in force Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the delivery of domestic hot water becomes even more rapid and comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation:ÿWith the installation of the kit or External probe? possible to operate the boiler in sliding temperature. This means that without acting on the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while guaranteeing maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and electrical undervoltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. By means of a post sensor on the sanitary circuit, it continuously checks the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only when the latter drops to the level necessary to guarantee optimal comfort for the user. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from August 1, 2015 be equipped with a low-consumption circulator, otherwise defined as class A. This is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, or by analyzing the impact of the low-consumption circulator integrated in the boiler, this reduces the total electricity consumption of the generator by 30%. consumption max. standard non-modulating circulator:ÿ0.085 kWÿ consumption max. new high efficiency circulator:ÿ0.04 kWÿ Degree daysÿ2500ÿ(average climate zone E)ÿ Energy cost:ÿ0.19 ??¶/kWhÿ Hypothetical annual expenditure at max standard circulator speed:ÿ40.375 ??¶ÿ Hypothetical annual expenditure max speed high efficiency circulator:ÿ11.4 ??¶ÿ Therefore, with the replacement of standard boilers with Bluehelix Pro, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W ERP extension The new European regulations for heat generatorsÿ The 4 ErP Regulations on: ÿEcodesignÿ (minimum efficiency limits) and Energy Labeling (information energy label) are mandatory European provisions automatically in force from 26 September 2015 simultaneously in the 28 EU countries and in all EEA countries (European Economic Areas: Liechtenstein, Switzerland, Norway, Iceland). The Regulations (or EU Regulation? nr.: 811/2013, 812/2013, 813/2013 and 814/2013) are already published by the EU and are legal provisions which leave no legislative power (of modification/variation of delayed adoption) to the EU Member States, in so far as they do not require any national law of adoption, but come into force automatically or per se? throughout Europe.ÿ From 26th September 2015, boilers, heat pumps, tanks/boilers, water heating systems or non-ErP compliant systems will not be able to leave the factories and warehouses of MANUFACTURERS (nor from the warehouses of IMPORTERS from outside the EU), except for products for which it has already been carried out the placing on the market or the transfer of formal ownership (before 26 September) to the first customer/distributor of the commercial chain. The date which is the date on which the finished product was first placed on the market. In practice, by virtue of the new Regulations, manufacturers in the EU area and importers from outside the EU will be obliged to offer for sale only highly efficient products and systems, both for space heating and for the preparation of domestic hot water. Will the end customer be able to find latest generation products immediately on the market? which will be compulsorily accompanied by the ENERGY LABEL and compliant with the MINIMUM LIMITS calculated according to strict European standards which for the first time for these new products or ErP? considers all types of direct and indirect consumption of appliances, e.g. gas consumption and electricity consumption in a boiler.ÿ New ErP efficiency limits (and noise for heat pumps only) will apply to heating systems (boilers and heat pumps) up to 400 kW, to instantaneous gas and electric water heater systems up to 400 kW, to DHW tanks up to 2,000 kW lt. All new products and systems must be of very high efficiency, with the sole exception of tipB1x boilers (open chamber with natural draft) which will have a special derogation and may still be manufactured and sold exclusively to be installed in REPLACEMENTS on COLLECTIVE FLUES . Heat pumps will have to comply with new minimum limits for noise emissions, while for boilers the noise value will have to be indicated (without limit constraints). Furthermore, even the circulators mounted on board all the products must comply with new minimum efficiency standards (very high efficiency), based on the specific EU Regulations (nr. 641/2009 and nr. 622/2012). To make the most of all the possibilities offered by the energy label, will it be possible to predict and declare their use in a system right from the product conception and development stage? with other devices (e.g. regulation and control), thus proposing a globally more efficient whole, e.g. eg. through the use of renewable sources (solar thermal, geothermal aerothermal energy, biomass). Even the so-called or standard products? today the best sellers - i.e. boilers for gas heating - will undergo a forced evolution towards technology with heat recovery from fumes (condensing boiler). We remind you that condensing boilers can recover the heat from the fumes in most of the existing systems, even those with radiators, with the use of thermostatic valves now available in various models (also programmable individually on different times), due to their different conception of design incorporating substantial improvements over previous or standard boilers? such as the new highly efficient modulating circulators and the combustion control volume in the new premix burners. Subsequently, for products sold by manufacturers and importers from outside the EU after 26 September 2018, more stringent limits for NOx emissions will come into force Theÿ20/20/20 climate-energy package?ÿsets ambitious targets for the reduction of greenhouse gas emissions, energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context , the regulationeuropeErP (Energy Related Products) introduces an energy classification also for hot water generators for space heating and domestic hot water purposes. This classification translates into an ÿenergy labelÿ which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the most efficient product. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which in the casdel prodottsingolcaldaia ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the domestic hot water flow rate of the appliances measured in a series of sample samples, thus guaranteeing the declared sanitary efficiency. This index is identified with a letter/?size? (S, M,¶ÝXXL). Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS HE 25S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG LPG FUME EXHAUST - NEW ErP;ÿSTAINLESS STEEL wall-mounted condensing boilerÿ Technical specifications Model:ÿevoDENS HE Product codeÿLPG: 103021021000 Product codeÿLPG: 103121029000 Technical features: Heating/sanitary nominal heat inputkW 20.0 / 26.0 Yield name 60ø/80øC * % 96.7 Yield min. 60ø/80øC * % 92.4 NOx class no. 6 Minimum / maximum heating temperature****øC 25 / 80 Minimum / maximum heating pressurebar 3.0 / 0.3 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Maximum flow rate (T=25 K) / (T=35 K) l/min 14.4 / 10.3 Specific sanitary flow rate (T=30 K) ***** l/min 12.0 Voltage / Power at nominal heat input V~/ W 230/100 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxDÿmm 700x400x290; 32.7 Kgs Boiler water content l 2 Main features EvoDENS HE The new range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger Evodens HEÿis the new SAVIO range ofÿwall-mounted condensing boilersÿ: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in versions for heating and domestic hot water production and for heating onlyÿEvodens HEÿpresents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290 mm).ÿ Evodens HEÿhas the strong point in the innovative heat exchanger designed to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire SAVIO condensing range, ÿEvodens HEÿallows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. MAIN FEATURES: High yields (in compliance with yield directive 92/42ÿCEE and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary condensing exchanger in stainless steelÿwith aluminum linings to offer maximumÿresistance to corrosion Total premix burner, built in stainless steel (Class NOx 5) Modulation 1:10 Methane also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tanks High efficiency PWM pump with low power consumption variable speed Maximum power adjustable according to the system Degrees of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel Digital pressure reading Arrangement for remote control of external probe Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems. High circulation single coil primary exchangerÿSavi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with less loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in the case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. CONTROL PANEL Summer/winter/off selector Heating temperature regulator Sanitary temperature regulator Digital pressure reading Domestic hot water and heating temperature visualization from the display Display of fault diagnostics, fault history block status Refill ViewÿRecommended Refill Guide Display of months remaining until annual maintenance is due External temperature displayÿ(with external probe connected) andÿindication of external probeÿconnected and K value set Flame modulation display Visualization of SavioÿSOLCONTROL solar control unit connected to EVODENSÿHE, active solar pump and solar integration DHW comfort functionÿselectable by means of a dedicated keyÿand programmable Ingressdirectl the INFO menu dedicated to the user. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. EVODENS HE will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency also rises, giving greater value to your home. Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

IN THE ABSENCE OF THE PRODUCT THE NEW CARES S 24 MODEL WILL BE SHIPPED Technical features Product code: 3301119 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min: Kw 23.5/5.5 Max/min nominal heat input in domestic hot water: Kw 23.5/5.5 Useful thermal power in heating: max/min: Kw 22.9/5.3 Efficiency at nominal heat input (60/80°C): 97.5% Efficiency at nominal heat input (30/50°C): 103.9% Efficiency at 30% at 30°C: 108.2% Max/min heating temperature (high temperatures): 82/35°C Max/min heating temperature (low temp.): 45/25°C Max/min DHW temperature: 60/36 °C Sanitary water production (DT=25°C): lt./min. 13.1 Specific flow rate (first 10' with DT=30°C): lt./min. 10.5 Total absorbed electric power W 87 Degrees of protection of the electrical system IP X5D Dimensions (HxWxD) mm 745 x 400 x 319 Power supply: METHANE General characteristics CARES PREMIUM EU Simplicity, compact dimensions and good efficiency The Ariston Cares Premium compact wall-mounted condensing boiler combines technology and ease of installation thanks to its small size. It is made in the heating and domestic hot water production version, with 24 kW of power and is set up for integration with the system configuration via the new Bridgenet® Bus communication protocol. Designed and built in Italy, the Cares Premium condensing boiler also provides for the management of solar energy systems and is equipped with antifreeze, anti-limescale protection and anti-blocking circulator. Characteristics: Compact condensing boiler Aluminum-silicon condensing exchanger Mini-LCD display Modulation ratio 1:4 Silent and compact BusBridgeNet® communication protocol Smoke outlet 80, 60 mm NEW models only: Installation in partially protected places MET/LPG operation with standard kit Ecodesign directive: from 2015 only new condensing boilers After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX URBIA GREEN Ebus2 35 EU CONDENSING BOILER Cod. 3310409 COMPLETE WITH FUME EXHAUST KIT -NEW ErP 2015: Wall mounted condensing boilers with 4 liter mini-accumulator. Technical specifications Product code: 3310409 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat output max/min (Hi) Qn:ÿ31/3,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ30.3/3.4ÿkW Useful heating power50§ C/ 30§ C max/minÿ33/3,6ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ34.5/ 7ÿkW Efficiency at nominal heat input:ÿ97.7% Efficiency 30% of nominal heat input:ÿ108.7% Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 8 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Port. specific in healthcare (10 min. with T= 30øC): 16.5 l/min Hot water flow rate at T 25§ C: 19.3 l/min Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ745 x 440 x 445ÿ; 46kg METHANE power supply or Features list URBIA GREEN Ebus2 EU Urbia Green is the ideal solution for all homes where the best performance is required. It is a concentration of advantages in terms of sanitary comfort with reduced dimensions and consumption. Thanks to condensing technology and integration with solar systems, it maximizes energy savings and the 4-litre sanitary reserve satisfies the needs of the most demanding users. Sanitary comfort Mini-accumulintegrated in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate from 14.6 to 19.3 l/min with T = 25§C. DHW production controlled by a modulating turbine to respond to needs without waiting times and at a constant temperature, even when extractions are very low. DHW programmer to control the tank heating time slots Eco-Delta System: DHW load system with 4 liter reserve to further improve the comfort of DHW production and new ecological functions which allow you to save energy in DHW mode. Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. SRA function, automatic boiler regulation system according to heating requirements. Modulation wide range, from 10% to 100% of the maximum power. Reduced polluting emissions, NOx class 5. Pressure sensor of the heating circuit with visualization on LCD display. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the room and/or outside temperature. Arrangement for integration into a heating system via the newÿEbus2 communication protocolÿ(boilers, solar, system management modules, modulating thermoregulation accessories). Multifunction LCD display with display: history, self-diagnosis, operating temperature. Filling taps integrated in the boiler. Convenience of installation use Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 25% energy savings in combination with Expert Control and the SRA function. Final 35% energy savings combine and Expert Control, the SRA function, the external probe and the radiant floor. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO FAMILY CONDENS 3.5 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP 2015: Family Condens is a technologically advanced wall-mounted boiler that combines the best comfort, energy savings and respect for the environment. Technical specifications Product code:ÿ20021506ÿ Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXL Class A Characteristics of heating/sanitary exercises: Fireplace thermal power (heating)ÿmin-max: 3.5ú35.0ÿkW Useful thermal power (sanitary) min-max: 3.5ú35.0ÿkW Energy efficiency(92/42/CEE)ÿ**** Efficiency at Pn* (50øC-30øC): 105.5% Profitability 30% (47ø return): 108% Sealed chamber, forced draft Quantity of hot water at t 25°C: 20 l/min Minimum domestic water flow rate: 2ÿl/min Dimensions (hxwxd) mmÿ845 x 453 x 358ÿ; 44 kgs Electrical protection degrees: IP X5D NOx class: 5 Power supply: METHANEÿ Features list FAMILY CONDENS Efficiency****ÿ Low polluting emissionsÿ Aluminum condenser, with premix burnerÿ Models for combined instantaneous and storage heating For indoor and outdoor recessed installations Family Condens a wall-mounted boiler that combines comfort, energy saving and respect for the environment with the best. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber (models 2.5 and 3.0) guarantees better efficiency and duration. Family Condens available with powers from 2.8 to 35 kW. Features:ÿ Modulation ratio 1:10 (minimum power 2.8 kW) which allows the boiler to respond to all heat requestsÿ Modulating circulator, low consumption(IEE0,20)ÿ 3 Stars in sanitary comfort according to EN 13203ÿ Remote alarm system which allows remote signaling of the boiler lockout statusÿ Special Family functions: Wellness Tast, Memory Tast, Touch&Go function, Intelligent system fillsÿ Assembly template, hydraulic fittings and electric power cable suppliedÿ LPG conversion kit (G31) supplied for 3.5ÿ models Standard external probe ÿInstallation Benefits Performance secondDir. 92/42/EEC. Circulator lowconsum(IEE0,20) Climatic adjustment managed directly by the boiler control unitÿ Special Family functions: TastBenessere, TastMemory, Touch&Go function Smart Fillsÿ Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products ErP the acronym for Energy related Products? (products connected to the use of energy) and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design (or eco-design?). The scope of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The regulations issued require that all products intended for heating and/for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an ÿenergy labelÿ that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as well as those on air conditioners, the efficiency data reported for the average climatic zone. In addition to product energy labels, European regulations have also provided for the creation of a "system label" in the case of building a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will allow the creation of systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); but this faculty is also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Model : Start IN Condens 25 KIS + Built-in Unit Code : 20114905 + 20082309 Efficiency Heating energy class: A Efficiency XL profile sanitary energy class: A Heating/DHW operating characteristics Heating nominal heat input: 20 kW Heating rated heat output: 19.5 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.2% Profit return 30% (47th return): 108.9% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 14.3 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 30 Kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: methane It can be installed flush-mounted using the special built-in unit Start In Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can be installed flush-mounted using the special kit and is available with powers of 25 and 29 kW. Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Standard thermoregulation on the card in combination with the external probe (optional) The remote control panel of the RiCLOUD series (optional) allows you to manage the boiler directly from inside the home IPX5D electrical protection degree Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Product code: 3301113 Energy class in heating: A; Energy class in sanitary: A; Profile: XL; Forced draft sealed chamber; Dimensions (HxWxD) 745x400x315 mm; Weight: 32.7kg; Energy data: Nominal heat flow in heating (max/min): 22.0/2.5 kw; Nominal heat input in DHW (max/min): 26.0/2.5 kw; Thermal power (max/min) from 80° C- 60° C: 21,5/2,3 kw; Thermal power (max/min) from 50° C- 30° C: 23.6/2.6 kW; DHW thermal power (max/min): 24.9/2.4 kW Combustion efficiency (flue gas) 97.4% Efficiency at nominal heat input from 60/80° C: 97.7% Efficiency at nominal heat input from 30/50° C: 107.4% Performance Stars: 4**** Expansion tank pressure: 1 bar; Max pressure: 3 bar; Expansion tank capacity 8 l; High temperature range (min.max): 35/82 °C; Low temperature range (min/max): 20/45 °C; Exercise performance in healthcare: Min/max domestic hot water temperature: 36/60 °C Specific flow rate (10 min. with ?T=30°C): 12.8 litres/min; Quantity of hot water ?T=25°C: 15.4 litres/min; Quantity of hot water ?T=35°C: 11.0 litres/min; Comfort performance stars (EN13203) ??? Supply voltage/frequency V/Hz 230 / 50 Minimum ambient temperature of use: >0°C; Absorption: 80W; Electrical protection: IP X5D; Drain: 80, 60, 50 mm; Power supply: LPG/METHANE (G20, NG); General characteristics New generation Ariston condensing boiler, it is the perfect mix of innovation and maximum comfort at your fingertips, in fact by connecting the appliance (also thanks to the Cube S NET, the room thermostat with integrated connectivity) to your smartphone or tablet via the appropriate downloadable app for both IOS or Android, the efficiency of the boiler connected to your smartphone give the maximum desired comfort. Installation in partially protected places or with suitable boiler covers is recommended due to the need for outdoor installation to better protect the appliance. Equipped with a large Dsplay with backlit touch interface to view correct operation and regulation or in the event of boiler malfunction for rapid intervention by authorized personnel. To always have domestic hot water ready, the Genus One Net boiler works with a high-efficiency circulator with continuous modulation (ratio 1:10) so as to respond quickly to the user's needs. Finally, the boiler is extremely silent, guaranteeing minimum acoustic disturbance, guaranteeing fewer cycles on and off the boiler and a new silencer and sound-absorbing panels that allow minimum noise. Advantages: Prepared for integration into system configuration Through the new Bus Bridgenet® communication protocol; Arrangement for multi-zone and multi-temperature thermoregulation; Arrangement for solar system management; Functions: Car and comfort function; Isothermal primary heat exchanger in stainless steel; Increased DHW exchanger; Ignition system; electronic combustion control; Gas transformation from the technical menu; Cold water inlet and heating return filters;

Read more less

Technical features NB: In the absence of the product, the new VMI 30 model will be shipped ErP energy class (Heating and DHW): class A Sanitary load profile - XL For heating and domestic hot water production Forced draft sealed chamber Nominal thermal power in sanitary kW 30 DHW nominal heat input kW 30.6 Performance stars (according to Dir. 92/42CEE) - **** Consumption at nominal power Natural gas m3 /h 3.2 Expansion vessel capacity 10 l Maximum water content in the system l 180 Storage tank setting temperature °C 35 - 65 Boiler nominal volume l 20 Minimum water flow l/min 1.5 Hot water withdrawal capacity (ΔT = 30K) l/10min 180 Domestic hot water comfort stars (prEN 13203) - *** Dimensions (hxpxl) mm 720x553x440; 57kg Power supply V/Hz 230/50 Total electric power W 100 Sound power dBA 50 IP degree of protection IP X4 D NOx class - 5 Version: CNG (0010019530) To view more product information CLICK HERE General characteristics Vaillant condensing boiler  With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year.    ecoTEC PLUS with boiler   Little space and a large family? ecoTEC plus with built-in wall-mounted boiler is the boiler designed to satisfy a high demand for hot water when spaces do not allow for the installation of external boilers.   The VMW ecoTEC plus with actoSTOR CL 20 S integrable storage tank are available in power ratings of: 30 and 34 kW. This stratification boiler is a real hot water reserve that can be installed very easily and quickly directly between the wall and the boiler. An exceptional solution that ensures the quantity of water needed is always available and without sudden changes in temperature. The boiler system with storage tank is very simple to assemble: first install the actoSTOR CL wall-mounted storage tank and the related pipes supplied for domestic water, then hang the ecoTEC plus VMW wall-mounted boiler on the storage tank. The dimensions are very small 70cm high, 44cm wide and 55cm deep. The stratification storage tank guarantees the same performance as a storage tank with a 60-litre coil but with considerably reduced spaces. The combination with ecoTEC plus allows you to exclude the storage tank functionality by making the boiler work instantaneously; this allows a considerable saving on gas consumption. New electronics and a very high efficiency pump make ecoTEC plus the wall-mounted condensing boiler that consumes less on the European market. ecoTEC plus is compatible with all Vaillant components and accessories already on the market. The new design is simple and intuitive.   Characteristics: Boiler ready for 2015 regulations ErP: class A Boiler with integrable storage tank Power modulation 1:8 10l expansion vessel High efficiency modulating pump (class A) Primary heat exchanger in steel High efficiency in the production of hot water up to 199 liters in the first 10' High DHW comfort Compact stratification storage **** Heating efficiency ELGA combustion system Ecodesign Directive (ErP) 2015 How to be ready for new EU legislation   What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed.   ErP and ELD: what do they mean and how are they different?  ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: - Category 1 Includes space heating appliances: electric, gas, oil, combined boilers, heat pumps and cogenerators up to 400 kW. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.  ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label.  Let's take a look at the new labels...        When and how will the new rules apply? On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products     Why push condensing technology right away?   For the energy requalification of individual homes, the 2007 Budget Law was extended until 31 December 2015. The request for a 65% tax deduction concerns, for example, the replacement of a traditional boiler with a condensing boiler.     What will Vaillant support be?   7 year guarantee   The 7-year guarantee on new boilers is another excellent reason to offer Vaillant to your customers. In addition, know that by replacing a Vaillant boiler over 15 years old with a new generation one, the warranty extension will be provided free of charge by the Vaillant Official Technical Assistance Center against a maintenance contract. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS E 35S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG FUME EXHAUST LPG - NEW ErP;ÿMedium range stainless steel condensing boiler Technical specifications Model:ÿevoDENS Product codeÿLPG: 103041002300 Product codeÿLPG: 103141003300 Characteristics of heating/sanitary exercises: Heating/DHW nominal heat inputÿ30.0 / 34.0 Heating/DHW minimum heat inputÿ8.5 Yield name 60ø/80øC %ÿ98.2 Yield min. 60ø/80øC %ÿ97.6 Rendimental 30% at 30øC:ÿ102.1 Energy efficiencynøÿ Minimum / maximum heating temperature**øC 25 / 85 Minimum / maximum heating pressurebar 0.3 / 3.0 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Sanitary minimum / maximum temperatureøCÿ35 / 55 Sanitary minimum / maximum pressurebarÿ0.3 / 10.0 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ21.6 / 15.6 Voltage / Power at nominal heat input V ~ /W 230 ~ / 114 Power at minimum thermal capacity W 10 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxD:ÿ700x400x290 mm; 37.0 kgs Boiler water content 2.5 l Main features evoDENS The new Savidi range of high efficiency wall mounted boilers dedicated to residential buildings. A complete range of powers, 24, 28 and 32 kW, for heating and the production of domestic hot water, inÿextremely compact dimensionsÿ (700 x 400 x 325 mm) makes Evodens a product suitable for different comfort needs.ÿEvodensÿe endowed with an aesthetic innovativeÿand a newÿimmediate and simpleÿto use interface. New functions make ÿEvodens an integral part of a system and facilitate its installation. Exchangers: Primary heat exchanger in copper, high circulation lamellar. Sanitary heat exchanger in stainless steel plates digital control panel:ÿInnovative digital control panel with graphical interface and buttons Ecodesign Directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less