ARISTON GENUS PREMIUM EVO CONDENSING BOILER IN 25 EU COMPLETE WITH LPG - ErP FUME KIT Technical features Product code: 3300736 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Min operating temperature* °C -15 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.6 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 78 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 1140/590/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Standard: Sensys system manager with integrated time programming General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston responds to all the indications foreseen, for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energies. Genus Premium Evo IN Genus Premium Evo In is the wall-mounted condensing boiler expressly designed for built-in installation. Small dimensions and reduced weight, its implementation is extremely simple. This without renouncing the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). High efficiency product with reduced consumption thanks to the 1:10 modulation ratio and the high efficiency circulator with continuous modulation Characteristics: Built-in condensing boiler with auto function and info top Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Modulation ratio 1:10 Universal built-in unit in electro-galvanized sheet metal (to be ordered with separate code) Possibility of outdoor installation thanks to all weather protection systems. Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Semi-automatic filling Circular anti-freeze, anti-limescale and anti-blocking protection Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

ATTENTION IN THE ABSENCE OF THIS PRODUCT, THE MODEL PIGMA ADVANCE EXT 25 WILL BE SUPPLIED Overview CHAFFOTEAUX PIGMA GREEN EXT Ebus2 25 EU CONDENSING BOILER Cod. 3310443, COMPLETE WITH FUME KIT - NEW ErP 2015: Condensing technology with minimum bulk and maximum installation versatility make Pigma Green Ext Ebus2 EU the best choice where living spaces are you don't want to give up comfort and savings. Technical specifications Product code: 3310443 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat input in heating max/min (Hi) Qn: 22/5.5 kW Useful heat output 80/60øC in heating/sanitary max/min:ÿ21.5/5.4kW Nominal heat input in sanitary(60/80øC) max/min:ÿ26/5,5 kW Efficiency at nominal heat input:ÿ97.5% Efficiency 30% of nominal heat input:ÿ109% Sanitary comfort performance starsEN13203: *** Energy efficiency stars: (dir 92/42/CEE) **** Capacity of the expansion vessel: 8 lt Port. specific in healthcare (10 min. with T= 30øC): 12.2 l/min Minimum withdrawal:ÿ<2ÿl/min Total absorbed electric power: 76 W Degrees of protection for the electrical system: IPÿX5D Dimensions hxwxd: mmÿ766x505x240ÿ; 32kg LPG fuel supply or Features list PIGMA GREEN EXT Ebus2 EU Condensing technology with minimum bulk maximum installation versatility makes Pigma Green Ext Ebus2 EU the best choice where living spaces are precious and you don't want to give up comfort and savings. Resistant to corrosion, wind and frost, it can be installed anywhere and conveniently control all functions via the standard Expert Control system manager. Pigma Green Ext Ebus2 can be perfectly integrated with solar thermal systems and modules for the management of multi-zone systems, even with different temperatures, to make any design solution simple. Sanitary comfort Increased plate heat exchanger in stainless steel. 3-star sanitary comfort, the maximum unexpected by the EN 13203 standard. 12 l/min (T= 30°C) domestic hot water flow rate, measured in compliance with standard EN 625. Sanitary circuit managed by four probes and a flowmeter, to eliminate waiting times and have a constant temperature, even in the case of small withdrawals. Perfectly integrable with thermal solar systems, forced and natural circulation Daily and weekly hourly programming of the DHW exchanger pre-heating periods directly from the Expert Control system manager. Heating comfort ÿRendimentfinal 109% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. Automatic regulation system, which can be activated directly from the Remote Control, to obtain the best heating operating regime in all environmental conditions. Useful thermal power up to 23.5 kW. Modulation ratio 1:5. Reduced polluting emissions, NOx class 5. Heating circuit pressure sensor with display on Expert Control. Modulating circulatorÿ to improve acoustic comfort and reduce electricity consumption. Differentiated climatic thermoregulation of 3 circuits, according to the ambient and external temperature. Operation management and programming through the Expert Control system manager: operating modes and temperatures, self-diagnosis, daily and weekly programming, adjustment information and history of the latest faults. Convenience of installation use Semi-automatic fillings that can be activated from the Expert Control system manager. Expert Control system manager and external probe as standard. Adjustment of operating parameters directly to Expert Control system manager. Arranged for the control of 3-circuit system management modules at different temperatures. Prepared for the management and integration of thermal solar systems (standard solar probe). Electrical protection degrees IPX5D and operation guaranteed up to -15øC **. Commissioning made easier: automatic de-aeration function and combustion regulation with direct access. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli condensing boiler Bluehelix Tech RRT 30 H Heating only METHANE OR LPG Complete with flue gas kit - New Technical features: ERP Class (Class G - A++) A Heating max / min heat input (Hs) kW 30.6 / 6.4 Max / min heat output heating (80/60°C) kW 30 / 6.3 Max / min heat output heating (50/30°C) kW 32.5 / 6.9 Efficiency Pmax / Pmin (80-60°C) (Hi) % 97.9 / 98.0 Efficiency Pmax / Pmin (50-30°C) (Hi) % 106.1 / 107.5 Efficiency 30% 109.5 Max / min heating pressure bar 3 / 0.8 Empty weight kg 28 No. of pieces/pallet no. 12 CNG/LPG CODE 0T3D2BWA STRENGTHS: With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix" series Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt. A+ System: in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits MGR: Methane: LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace Sanitary production in combination with storage tank (optional), standard 3-way valve in the boiler Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass BENEFITS OF BLUEHELIX TECH RRT H: Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! In case of immediate unavailability, the product will be ordered and shipped within 10 working days Technical Features Model: D2CND024A0AA Heating Efficiency class (55°C): A Firebox power (Qn): 2.9 - 23.5 kW Nominal heating power (80°/60 °C): 2.8 - 22.8 kW Nominal heating power (50°/30°C): 3.1 - 24.0 kW Heating efficiency: Up to 108.7% Modulation range: 1:8 Expansion vessel volume: 8 litres Domestic hot water Efficiency class: A Withdrawal profile: XL Temperature Range: 35°C ~ 60°C Continuous service withdrawal (∆T=30°C): 11.3 l/min Continuous service withdrawal (∆T=25°C): 13.6 l/min Water mains pressure: 0.5~10 Bar Technical data Power supply (V,Hz,Ø) : 220~240/50/1 Power consumption: 3.5 ~ 86 W Water content: 1.31 litres Sound power : 39 dB(A) Sound pressure: 49 dB(A) NOx class : 6 Exhaust gas temperature (G20) : 77° C Electrical protection class: IP X5D Installation data Chimney diameter: 60/100 mm Maximum length for flue gas system DN 60/100: 12.5 m Maximum length for flue gas system DN 80/125: 42.8 m Maximum length for flue gas system DN 80/80: 125 m Dimensions and weight Dimensions (HxLxD): 590x400x256 mm Weight: 27 Kg Simply Peace of Mind Guarantee To guarantee you maximum peace of mind, DAIKIN has designed “SEMPLICEMENTE SERENI”, an extension of the warranty up to the 5th year of life of your product, which includes the subscription to a Scheduled Maintenance Plan with specialized Daikin technicians. Daikin D2C ultra-compact condensing boilers for heating and DHW production Why choose a condensing boiler? Daikin condensing boilers are a good solution for those who want to replace an existing boiler with a more efficient alternative, saving on costs. Our portfolio includes boilers for every need, from the wall-mounted boilers D2C and Full condens and Full Condens TOP, to the boiler with built-in heat storage GCU, to the floor-standing diesel boiler A2 Thanks to the special Daikin patented exchanger, the D2CND boiler achieves high specific power and high partialization to ensure comfort and efficiency in any operating mode and in minimum space. The D2T version, heating only, integrates a diverter valve and can be connected directly to a storage tank for the production of domestic hot water. Ultra-compact and elegant technology The beautiful compact boiler The new D2C condensing boilers are 100% Daikin design. The ultra-compact dimensions make them suitable even for the smallest apartments, where every centimetre saved is space gained A boiler for every need The D2C boilers are available in 3 combi versions 24, 28 and 35 kW for heating and the production of instantaneous domestic hot water. A wide range of heating-only boilers is also available, the D2T, in 5 sizes, from 12 to 35 kW, which can be combined with a storage tank for the production of domestic hot water. They can be installed practically anywhere thanks to their compact size and the minimum installation space required. Thanks to the IPX5D electrical protection rating and the anti-freeze kit, they can also be installed outdoors. Do you want to keep your heating system under control even when you are not at home? Combine the Lan Adapter for control via APP ! Efficiency and respect for the environment The combustion system with regulation via the Gx Lambda probe automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimum polluting emissions . Maximum comfort Thanks to a high modulation ratio, up to 1:8 , the power output is automatically varied to always adapt, moment by moment, to the real needs of the home in which it is installed. Endless showers? Domestic hot water will no longer be a problem with the D2C boiler with a DHW flow rate of up to 19 l/min in the 35 kW version Cutting-edge technology meets an attractive and user-friendly user interface Daikin Eye An elegant luminous eye that, thanks to a multi-coloured LED, signals the operating status of the appliance. In the event of a fault, the LED turns red and the error code is displayed. The simplest way to interact with your boiler! Daikin Heating Online Controller Your heating system is always under control, wherever you are! Thanks to the Daikin Heating Online Controller application you can now control and monitor your boiler conveniently from your smartphone in a simple and intuitive way Monitor The state of your heating system The room temperature in your home Energy consumption graphs. Plan Your home temperature and boiler operation with up to 6 actions per day for 7 days Vacation mode Check it out The operating mode and the set room temperature The system and the production of domestic hot water Integrating third-party products and services through IFTTT (if this then that) services Replacing your old boiler has never been easier! Thanks to its small size and IPX5D protection rating, Daikin D2C can be installed virtually anywhere. Its ultra-compact dimensions make it suitable even for the smallest apartments, where every centimeter saved is space gained and its elegant shapes do not look out of place in the kitchen. A distinctive element of the 100% Daikin design is also the Daikin Eye: an elegant luminous eye that, thanks to a multi-chromatic LED, signals the operating status of the appliance. Daikin D2C embodies the best of condensing technology. The SCOT combustion regulation system automatically adapts to the quality of the gas used, methane or LPG, always ensuring clean combustion and minimum polluting emissions. Minimized size and weight are possible thanks to the innovative high-capacity air/fume exchanger body patented by Daikin. The heart of the new D2C boiler, it has been designed to obtain the highest thermal power in the smallest space. Functions Eco Mode Return temperature control to optimize condensation Warm start DHW exchanger already heated and ready for use thanks to the memorization of habits that allows anticipating the request for domestic hot water Solar connection If the water entering the boiler has been preheated by the solar system, the burner does not ignite, for optimal integration of the solar source Exclusive initiative for Daikin customers On the occasion of the launch of the new Daikin D2C, starting from March 1st 2017 Daikin is giving away the activation cost of Semplicemente Sereni. The offer is valid for all those who purchase a Daikin boiler of any type and who already own a Daikin mono split or multisplit. All the details on daikin.it. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

Hermann Saunier Duval Combitek 28 C gas boiler complete with methane or LPG fume exhaust kit - News PLEASE NOTE! THE BOILER WILL BE SUPPLIED WITH METHANE, THE TRANSFORMATION TO LPG WILL TAKE PLACE THROUGH THE SERVICE CENTER FOR FREE! Select the smoke kit in the drop-down menu! Technical features Model: combitek Power : 28 kW Gas : Methane or LPG Heating efficiency class: A Sanitary efficiency class: A Sanitary load profile XL Maximum pressure at the burner Natural gas G20 (min/max): 2.10/13 mbar Consumption at (min/max) power Natural gas G20: 1.12/2.8 m3/h Maximum pressure at the LPG G30 burner (min/max): 5.3/32.7 mbar Consumption at (min/max) power Natural gas G30: 0.82/2.05 m3/h Dimensions: (HxWxD): 740x410x310 mm; Weight: 34 Kg Connections: gas Ø3/4” heating Ø3/4” sanitary Ø1/2” COMBITEK The optimal solution for heating and domestic hot water preparation . Excellent value for money, both for new builds and replacements It can be retrofitted into existing heating and hot water supply systems The project has been developed to offer the optimal solution in terms of price , performance and quality . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

AVAILABLE TO ORDER ATTENTION: THE PRODUCT WILL BE SUPPLIED WITHOUT THE SPECIFIC SMOKE KIT! Technical Features Model : Victrix 28 KW TT Boiler Code: 3.025511 Template Code: 2.015543 Type: Snapshot Useful Heating Power: 24 kW Useful Sanitary Power: 28 kW Modulation Range: 11 - 100% Hot water production (∆t 30 °C): 13.4 l/min Dimensions (H x W x D): 748 x 440 x 255 mm Weight: 32.0 Kg VICTRIX 28 KW TT Maximum energy savings, maximum flexibility With VICTRIX 28 kW TT Immergas takes the installation flexibility of condensing boilers even further and offers a wide variety of solutions thanks also to the extreme compactness of its dimensions , just 25 centimetres deep. All boilers can be installed: Inside ; Built-in with OMNI CONTAINER but also in SOLAR CONTAINER or DOMUS CONTAINER to add products that use solar thermal energy and heat pumps to the boiler in the GAUDIUM SOLAR V2 or TRIO V2 applications; Outdoors in partially protected places ; And today also in the open air with the dedicated coverage kit. This increases the possibility of creating systems that comply with the new European Directives, which are increasingly oriented towards condensing technology to reduce pollution and increase energy savings. The eco-friendly VICTRIX kW TT condensing range expresses the best of Immergas technology, offering great performance thanks to the innovations introduced in the product design. Two instantaneous versions of 28 and 35 kW are available, and three heating-only versions (12, 24 and 32 kW PLUS) that can be combined with domestic hot water boiler units of various capacities. HIGH HYDRAULIC PERFORMANCE Primary condensation exchanger, made of an Aluminum-Silicon-Magnesium alloy, particularly resistant to corrosion. Designed to have high flow rate and head performance even on old heating systems thanks to the large water passages. This also means a low risk of clogging in the presence of impurities in the system water. It is important to maintain the pH of the heating system filling water, between 6.5 and 8.5 with a hardness of 15 °F REDUCTION OF ELECTRICITY CONSUMPTION Electricity savings thanks to the low consumption modulating circulator, in class A. The circulator can be set in the operating modes: constant ∆t, proportional prevalence or constant speed . The presence of two NTC probes on the system flow and return allows constant modulation of the boiler operating conditions based on the requests of the heating system with a consequent increase in seasonal efficiency. The boiler's electrical consumption in stand by is less than 6 W DESIGNED TO FACILITATE PROFESSIONALS VICTRIX kW TT, produced on the new highly automated lines at the historic Immergas headquarters in Brescello, is a specific range of products developed on the “Top Tech” platform. It features special technical features designed to facilitate the work of professionals such as: Safety valve discharge piped into condensate drain; Cover casing for hydraulic connections, to better fit the boiler into domestic spaces; Direct accessibility to the electrical connection compartment of the main external devices (e.g. CARV2, external probe, CRONO 7) by simply removing the front aesthetic cover without the need to open the product. SELF-ADAPTING COMBUSTION The electronic gas valve allows air/gas control via a multifunction electrode placed inside the combustion chamber; the electronic board automatically adapts the combustion parameters in the event of variations in air or fuel density. This allows VICTRIX kW TT to be powered by any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example when the Authorized Assistance Center starts up for the first time). The boiler is therefore supplied with a single product code . COMFORT High hydraulic performance: the innovative condensing module guarantees high flow rate, low risk of clogging due to impurities in the system water, greater resistance to corrosion thanks to the special alloy. High seasonal efficiencies: the boiler's wide modulation range allows for high seasonal efficiencies with consequent reduction in gas consumption . Thermoregulators: optional. They improve comfort and increase energy savings. DOMINUS App: optional. Simple and intuitive , it allows you to check the boiler operation and temperature, activate its switching on and off from any location via smartphone or tablet. EXTRA Comfort Formula: uses the most complete maintenance program that allows you to extend 5 years with free activation the conventional guarantee which, in collaboration with the Authorized Immergas Assistance Center, can be activated during the initial check. ENVIRONMENTAL COMPATIBILITY Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European standards UNI 297 and 483): the best for reduced nitrogen oxide emissions (NO X ). Renewable energy: can be combined with solar systems and hybrid systems with heat pumps. INSTALLATION Maximum flexibility: approved for indoor, built-in and outdoor operation, even in the open air . IPX5D electrical protection. Antifreeze as standard up to -5 °C. Maximum compactness: only 25 cm deep. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

RIELLO FAMILY CONDENS 2.5 KIS LPG CONDENSING BOILER COMPLETE WITH SMOKE KIT - NEW ErP 2015: Family Condens is a technologically advanced wall-mounted boiler that combines the best comfort, energy savings and respect for the environment. Technical features Product Code: 20102932 Energy label specifications according to European ErP directive Heating energy efficiency Class A Energy efficiency of sanitary equipment XL profile Class A Heating/sanitary operation features: Fireplace thermal power (heating) min-max: 2.8÷20.0 kW Useful thermal power (domestic hot water) min-max: 2.8÷25.0 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 107.2% Profitability 30% (47th return): 109.6% Airtight chamber, forced draft Amount of hot water at Δt 25°C: 14.3 l/min Minimum flow rate of sanitary water: 2 l/min Dimensions (hxwxd) 845 x 453 x 358 mm; 42 kg Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG General Features FAMILY CONDENS Performance **** Low polluting emissions Condensation in aluminum, with premixed burner Combined instantaneous and storage heating models For indoor, outdoor and built-in installations Family Condens is a wall-mounted boiler that best combines comfort, energy saving and respect for the environment. The new primary heat exchanger made entirely of aluminum with frontal accessibility to the combustion chamber (models 2.5 and 3.0) guarantees better efficiency and durability. Family Condens is available with powers from 2.8 to 35 kW. Characteristics: Modulation ratio 1:10 (minimum power 2.8 kW) which allows the boiler to respond to all heat requests Modulating circulator, low consumption (IEE≤0.20) 3 Stars in health comfort according to EN 13203 Alarm remote control system that allows remote reporting of boiler block status Special Family functions: Wellness button, Memory button, Touch&Go function, Intelligent system filling Assembly template, hydraulic fittings and power cable included LPG conversion kit (G31) supplied with 3.5 models External probe as standard. ErP: Energy related Products The new European regulations for heat generators ErP is the acronym for “ Energy related Products ” (energy-related products) and is the abbreviation that identifies the European ErP Directive 2009/125/CE, defined by the EEC with the aim of reducing the energy consumption of products through eco-compatible design (“eco-design”). The scope of this European Directive is extremely broad as it has so far affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, from 26 September 2015 it will also apply to heating and domestic hot water production products. Also from the same date, other regulations that will implement the energy labeling of the same product families will become effective. The transitional period between the publication of the regulations and their activation throughout the European Community was necessary to allow the full reception of the contents by companies and market players. Energy labelling of heating and domestic hot water products The regulations issued require that all products intended for heating and/or the production of sanitary water, with a nominal thermal power lower than or equal to 70 kW, be placed on the market with an energy label that highlights their efficiency class. Note: the regulation requires the presence of the energy label for the release of the product from factories to the market. All products previously released, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Different energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of sanitary water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the efficiency level of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency data is reported for the average climate range.   In addition to product energy labels, European regulations have also provided for the creation of a system label in the case of a system in which several devices, components and controls operate.   This labeling, thanks to the combinations of data from the different elements used in the system, will allow the creation of systems capable of reaching efficiency levels even higher than those of individual generators. The European regulation requires that the system label must be made available by those who supply and/or operate the system (sellers-installers); however, this option is also granted to manufacturers. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

SAUNIER DUVAL HELIOTWIN CONDENSING 25-200 WITH ACCUMULATION 200 l COMPLETE WITH SMOKE KIT - NEW ERP Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: Shift-Load Heating Nominal power P min/max heating 80/60 °C: kW 3.4/27 Partial load efficiency 30% 40/30 °C %: 108 Sanitary Rated power min/max (60 °C): kW 3/25 Specific flow rate (∆T=25 K): l/min 14.4 Continuous flow rate (∆T=30 K): l/min 22.9 Min/max DHW temperature: 35/65 °C Electrical characteristics Total absorbed electric power: W 105 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 1880 x 600 x 698 mm CNG code (G20) - 10014620 METHANE version HELIOTWIN CONDENSING HelioTwin Condensing is extremely efficient from every point of view and thanks to the "Shift-Load" system it guarantees a great availability of DHW. A 25 kW model is available with an integrated 200-litre boiler. Features : Energy classification 4 stars ★★★★(92/42/EEC) with efficiency up to 108%; Sanitary comfort 3 stars ★★★ (EN 13203-1), thanks to the "Shift-Load" technology for the instantaneous production of stratified DHW, with a high-efficiency oversized sanitary exchanger with 20 stainless steel plates and 200-litre storage tank. Management of 1 forced solar circuit with integrated emptying: all the electronic and mechanical components for managing the solar circuit are integrated in the boiler for easy and efficient installation. Efficiency at 360°: thanks to the wide 1:8 modulation, the burner can modulate from 25 to 3 kw thus avoiding useless and inefficient On/Off cycles keeping the efficiency values ​​constant at 108%. Also from an electrical point of view, consumption in stand-by is minimal: 4.4 Watts. The insulation of the boiler allows very low heat losses: 1.91 kwh/24h. Continuous domestic hot water production (DHW) up to 14.4 l/min (DT 25 K) Low NOx emissions - class 5 (EN 483) Integrated emptying solar system: designed for integration with emptying forced circulation solar collectors Total premix burner with high modulation and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulators (main, sanitary and solar). Antifreeze function Prepared for internal integration of accessories for multi-zone systems Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO FAMILY CONDENS 3.0 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT + BUILT-IN UNIT - NEW ErP 2015: Family Condens is a technologically advanced wall-mounted built-in boiler that allows you to have the special Family functions in the concealed built-in unit. Technical specifications Product code:ÿ20102941 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXL Class A Characteristics of heating/sanitary exercises: Firebox thermal power (heating)ÿmin-max: 3.2ú25ÿkW Useful thermal power (sanitary) min-max: 3.2ú30ÿkW Energy efficiency(92/42/CEE)ÿ**** Efficiency at Pn* (50øC-30øC): 106.8% Profitability 30% (47ø return): 109.9% Sealed chamber, forced drafts Quantity of hot water at t 25°C: 17.2 l/min Minimum domestic water flow rate: 2ÿl/min Dimensions (hxwxd) mm 797 x 553 x 268ÿ; 42 kgs Built-in dimensions (hxlxp) mm 1223 x 654 x 281; 21kg Electrical protection degrees: IP X5D NOx class: 5 Power supply: METHANEÿ Complete with built-in unit code ÿ20082310 Features list FAMILY IN CONDENS Efficiency****ÿ Low polluting emissionsÿ Aluminum condenser, with premix burnerÿ Models for combined instantaneous and accumulation heating For built-in installations Family In Condens a built-in wall mounted boiler that allows you to have the special Family functions in the concealed built-in. The new primary heat exchanger completely made of aluminum with frontal accessibility to the combustion chamber guarantees better efficiency and duration. It is available with powers from 3.2 to 30 kW. Features:ÿ Modulation ratio 1:10 (minimum power 3.2 kW) which allows the boiler to respond to all heat requestsÿ Modulating circulator, low consumption(IEE0,20)ÿ 3 Stars in sanitary comfort according to EN 13203ÿ Family Remote Control, supplied as standard, allows management of all boiler functions directly from inside the homeÿ Antigelfine -15øCÿ Remote alarm system which allows remote signaling of the boiler lockout statusÿ Special Family functions: TastBenessere, TastMemory, Touch&Go function Smart Fillsÿ Standard external probe. ÿTheÿFAMILY Remote Control kitÿ (remote control panel) is the instrument that allows you to manage the boiler remotely. The panel controls the boiler, storage tank and room temperatures, monitors and supervises the operating regimes, activation times and signals any anomalies. The remote control panel can be configured as: Chronothermostatÿ (factory con guration): it will operate according to the standard heating program according to the personalized one. In this con guration the control panel tries to keep the room at two temperature levels (comfort and reduced), switching from one to the other at times established by the user. Thermostat: the heating is activated when the temperature detected by the room probe (contained in the control panel) is lower than the one set regardless of the memorized heating programme. ErP: Energy related Products ErP the acronym for Energy related Products? (products connected to the use of energy) and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design (or eco-design?). The scope of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The regulations issued require that all products intended for heating and/for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an ÿenergy labelÿ that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as well as those on air conditioners, the efficiency data reported for the average climatic zone. In addition to product energy labels, European regulations have also provided for the creation of a "system label" in the case of building a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will allow the creation of systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); but this faculty is also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

SAUNIER DUVAL MASTER 4 CONDENSING 30 kW COMPLETE WITH FUME EXHAUST KIT - NEW ERP Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: AquaspeedPLUS® Heating Nominal power P min/max heating 80/60 °C: kW 6.1/25.0 Partial load efficiency 30% 40/30 °C %: 109 Sanitary Rated power min/max (60 °C): kW 6.1/30.6 Specific flow rate (∆T=25 K): l/min 17 Continuous flow rate (∆T=30 K): l/min 21 Min/max DHW temperature: 45 / 65 °C Electrical characteristics Total absorbed electric power: W 140 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 892 x 470 x 570 mm CNG code (G20) - 10017336 METHANE version MASTER 4 CONDENSING The Master 4 Condensing boilers boast exceptionally low consumption and are positioned at the top of the category both in terms of sanitary comfort and efficiency thanks also to the exclusive Aquaspeed PLUS® system for the production of domestic hot water. The range includes two models of 30 kW and 35 kW. Characteristics Energy classification 4 stars **** (92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars *** (EN 13203-1), thanks to the exclusive Aquaspeed PLUS® technology with sanitary stainless steel plate exchanger and double dynamic accumulation (42 litres). User interface with backlit digital display: the keys and symbols used allow the user to conveniently select the desired functions and temperatures and to use them simply and immediately. Solar Easy: all models in the Master 4 Condensing range are compatible with all solar systems. If solar radiation is not sufficient to keep the domestic water at the desired temperature, the boiler intervenes as an integration. Silent operation, modern design and compact dimensions make all Master 4 Condensing models perfect both for new systems and for replacement in existing systems, thanks also to a complete range of hydraulic accessories. Domestic hot water production (DHW) according to EN13203 up to 23 l/min Peak flow rate in the first 10 min. up to 276 litres Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating system antifreeze function Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO alDENS 35* CONDENSING BOILER COMPLETE WITH LPG FUME KIT LPG ideal for radiator systems - NEW ErP Technical specifications Model:ÿALDENS HE Technical data according to ErP directives Energy efficiency class in heating: A Sanitary energy efficiency class: A Load profiles: XLÿ Technical features: Minimum/Nominal useful power kWÿ4.3 ú 32.0 Minimum heat input with Methane/ Propaneÿ4,4 / 5,6 Efficiency class:ÿ Efficiency at nominal load in CONDENSATION % 102.3 Profitability at 30% of load% 98.1 NOx class 5 Operating temperature in heating min./maxøC 30 - 85 Adjustable temperature in sanitarywareøC 38 ú 60 DHW production mixed with t 25 l/min 18.3 Supply voltageÿV-Hz 230/50 Degrees of protection IP X5D Dimensions HxWxD mm 700x420x345; 36.5Kg Main features ALDENS ALDENS the new SAVIO range of condensing wall mounted boilers: excellent performance thanks to the aluminum heat exchanger and ease of use thanks to the control panel with knobs and display. Available in the combi version which combines the heating function and the production of domestic hot water. ALDENS presents a complete range of powers, 24 and 35 kW combi in the same extremely compact dimensions (700 x 420 x 345 mm). ALDENS has the strong point in the innovative primary heat exchanger in Al/Si/Mg with low water content designed to provide high yields that last over time. The digital display communicates the boiler operating parameters to the user in an easy and convenient way. Like the entire condensing range, SAVIO ALDENS allows you to make the most of savings from climatic thermoregulation, based on the system in which the boiler is installed. Main features: Outstanding fine 1:8 modulation ratio Efficiency>107% (ex dir. CE 92/42) Primary heat exchanger in ultra-flat Al/Si/Mg Electronics with HWS or Hot Water Speed ​​function? Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of fine hot water 13.3 l/min t 25 with special 12-plate (mod. 24 kW) and 16-plate (mod. 35 kW) exchanger in stainless steel Maintenance or Pit Stop? simple and intuitive control panel High efficiency modulating circulator (in line with ErP Dir. 2015) Sanitary exchanger Sanitary comfort ensured by the suitably sized plate exchanger to guarantee the best performance in terms of domestic hot water, reducing the waiting time and guaranteeing temperature stability. Modulating circulator with deaerator It represents the state of the art in the standard of high efficiency. In line with the ErP directive of 2015, with less than 1 W of consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed on the delivery/return automatically doses the boiler power to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Exclusive Ai/Si/Mg heat exchanger It is made in a special Aluminum/Silicon/Magnesium alloy which ensures its efficiency and resistance over time. Thanks to the configuration of internal heat exchangers, efficiencies higher than 107% are achieved in the condensing regime, which means great economic savings and very low environmental impact for the user. The 35 kW version suitably increased. Plus Manage 2 zones with 2 thermostats:ÿALDENS versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 different temperature heating zones (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats.ÿ Anti-overheating post-circulation:ÿFor 15 seconds, it maintains the thermal balance between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of.ÿ Sliding temperature operations:ÿFor maximum running economy.ÿ Antifreeze protection:ÿIt intervenes at 5°C and is activated in both domestic hot water and heating, bringing the temperature in the boiler to 15°C. The risk is avoided that ALDENS may freeze if low temperatures persist in the room where it is installed. If there is a lack of gas, the block signal will appear on the display.ÿ Pump anti-blocking: blocking of the pump following long stops is avoided thanks to an automatic 5-second pulse that the electronics sends to the motor every 24 hours of stop The multifunction LCD display, with timed backlighting, allows: Reading of the heating and sanitary temperatures Display of lockout due to lack of flame Error code display Malfunction signaling Operating/stand-by status Burner operating status Diagnostics with signaling of 11 anomalies Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

Overview SAVIO evoDENS HE 30S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG METHANE FUME EXHAUST - NEW ErP Technical specifications Model:ÿevoDENS HE Product codeÿLPG: 103041010000 Product codeÿMETHANE: 103141009000 Technical features: Heating/sanitary nominal heat inputkWÿ25.0 / 30.0 Yield name 60ø/80øC * %ÿ97.0 Yield min. 60ø/80øC * %ÿ93.6 NOx class no. 6 Minimum / maximum heating temperature****øC 25 / 80 Minimum / maximum heating pressurebar 3.0 / 0.3 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ16.7 / 11.9 Specific sanitary flow rate (T=30 K) ***** l/minÿ13.9 Voltage / Power at nominal heat input V~/ W 230/100 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxDÿmm 700x400x290; 32.7 Kgs Boiler water content l 2 Main features EvoDENS HE The new range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger Evodens HEÿis the new SAVIO range ofÿwall-mounted condensing boilersÿ: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in versions for heating and domestic hot water production and for heating onlyÿEvodens HEÿpresents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290 mm).ÿ Evodens HEÿhas the strong point in the innovative heat exchanger designed to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire SAVIO condensing range, ÿEvodens HEÿallows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. MAIN FEATURES: High yields (in compliance with yield directive 92/42ÿCEE and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary condensing exchanger in stainless steelÿwith aluminum linings to offer maximumÿresistance to corrosion Total premix burner, built in stainless steel (Class NOx 5) Modulation 1:10 Methane also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tanks High efficiency PWM pump with low power consumption variable speed Maximum power adjustable according to the system Degrees of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel Digital pressure reading Arrangement for remote control of external probe Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems. High circulation single coil primary exchangerÿSavi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with less loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in the case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. CONTROL PANEL Summer/winter/off selector Heating temperature regulator Sanitary temperature regulator Digital pressure reading Domestic hot water and heating temperature visualization from the display Display of fault diagnostics, fault history block status Refill ViewÿRecommended Refill Guide Display of months remaining until annual maintenance is due External temperature displayÿ(with external probe connected) andÿindication of external probeÿconnected and K value set Flame modulation display Visualization of SavioÿSOLCONTROL solar control unit connected to EVODENSÿHE, active solar pump and solar integration DHW comfort functionÿselectable by means of a dedicated keyÿand programmable Ingressdirectl the INFO menu dedicated to the user. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. EVODENS HE will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency also rises, giving greater value to your home. Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less