ARISTON GENUS PREMIUM EVO 24 EU CONDENSING BOILER COMPLETE WITH METHANE FUME EXHAUST KIT - NEW ErP Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.56 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 70 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/315 CNG or LPG power supply Kit for conversion from methane to propane supplied Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO : energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Genus Premium Evo The Genus Premium Evo wall-mounted boiler is the maximum expression of the Ariston range. Thanks to the condensing technology, by recovering the energy of the exhaust fumes, it generates an increase in the calorific value which makes it possible to eliminate waste (of energy) and to obtain higher thermal efficiency than conventional boilers. Genus Premium Evo offers even greater performance thanks to the innovative technology that allows it to self-regulate based on variations in the external and internal temperature of the room, allowing energy savings of up to 35% compared to an older generation boiler. It is available in the heating and domestic hot water production version in 3 powers: 24-30-35 kW (sealed chamber). Characteristics: Can be installed in partially protected places Large backlit dot matrix screen Continuous modulation high-efficiency circulator: for optimizing consumption and maximizing performance. Modulation ratio 1:10 - Automatic power regulation according to the heating request. Acoustic comfort guaranteed by the lower number of boiler on and off cycles, new silencer and sound-absorbing panels Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo thanks also to the high modulation ratio of 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston Condensing Boiler CLAS B ONE 35 Methane or LPG 40 lt storage tank complete with flue gas kit cod. 3301212 Product code: 3301212 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Rated heat input max/min (heating) PCI: 31-5.0 kW Nominal heat input max/min (sanitary) PCI: 34.5-5.0 kW Max/min useful heat output (heating): 30.2-4.7 kW Efficiency at nominal heat input (60/80°C) PCI: 97.3% Efficiency at nominal heat input (30/50°C) PCI: 106.5% Efficiency at 30% (30°C) PCI: 109.3% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 65-40°C Quantity of hot water (deltaT 25°C): 26.5 l/min Quantity of hot water (deltaT 35°C): 18.9 l/min Specific flow rate (first 10' with deltaT 30°C): 22.1 l/min Minimum operating temperature > 0°C Modulation ratio 1:7 Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 84W Degree of protection of the electrical system IP X5D Dimensions 24 kW mm (HxWxD) 900 x 600 x 474 Diet: methane or LPG Standard LPG conversion kit Functionality: XtraTech™ stainless steel primary exchanger AUTO, Comfort functions Internal installation ONE Series, the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, studied down to the smallest detail to guarantee maximum performance for a long time. New XTRATECH™ exchanger: Maximum quality. XtraTech™ it's the new one stainless steel exchanger exclusive* Ariston, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time. Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they obtain class A+! Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Class B ONE Condensing boiler with integrated 40 liter storage tank Characteristics: XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version LCD display 2 stainless steel stratification boilers of 20 lt Class A+ in heating reachable with thermoregulation Modulation ratio 1:7 BusBridgeNet® communication protocol Optimized tank heating logic AUTO and Comfort function Prepared for sanitary recirculation Smoke outlet 80, 60, 50 mm HIGH EFFICIENCY Product characterized by high energy performance, reduction of consumption and polluting emissions. MODULATING CIRCULATOR Modulating circulator for optimizing consumption and maximizing performance SYSTEM MANAGEMENT New communication protocol set up to ensure complete system management. MADE IN ITALY Made entirely in Italy. AUTO FUNCTION Maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance. COMFORT FUNCTION It speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last tap). SUPER SILENCE Silent operation in all operating modes. All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Ariston open chamber boiler BS II 24 CF methane Power 24 kW Nominal heat input 25.3 kW Dimensions 40x77x31.5 cm Energy efficiency stars (dir 92/42/EEC) *** Performance stars (heating and hot water production) *** Efficiency at nominal heat input 90.7% Efficiency at 30% of the thermal capacity 88.8% METHANE power supply BS II The brand new BS II 24 CF AUTOMATIC boiler, maximum efficiency and minimum consumption. It is increasingly important to contain consumption, both due to the growing cost of fuel and to help keep the environment as healthy as possible. This is why BS AUTOMATICA was born, the new wall mounted boiler with intelligent technology. In fact, the boiler chooses the optimal operating conditions in constant relationship with the outside, thanks to an innovative technology of sensors and system management. Comfort function to have domestic hot water in 5 seconds, Saving function to obtain 15% reduction in consumption and many other functions make the BS a product of very high technological efficiency, suitable for any type of heating requirement The BS compact wall-mounted boiler is available in the heating and domestic hot water production version in 2 powers: 24 kW (open chamber) and 24 kW (sealed chamber) and is set up for solar system management. It is equipped with a self-diagnosis system, via LED, which simplifies domestic management of the boiler and facilitates intervention by technical assistance in the event of any anomalies. This product is made by the manufacturer in only one version: methane. However, the boiler is approved to operate on LPG as well. By simply replacing the original nozzles, supplied by the parent company, the boiler will work regularly with LPG fuel. EQUIPMENT: Protection against freezing, limescale and circulator blocking. Arrangement for devices for wireless adjustments Cold water inlet and heating return filters. Multifunction led interface. LED self-diagnosis system. Increased expansion vessel. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

General characteristics Energy label specifications according to the European ErP directive   Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 28/3.0 Max/min heating thermal power (80°C-60°C) kW 27.1/2.9 Efficiency at nominal heat input (60/80°C) % 97.7 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 108.8 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 14.1 Quantity of hot water ∆T=25°C litres/min 16.8 Quantity of hot water ∆T=35°C litres/min 12 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 81 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/385 CNG or LPG power supply Kit for conversion from methane to propane supplied Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water.   Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies...  Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers.  EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the Energy Certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy.   Genus Premium Evo The Genus Premium Evo wall-mounted boiler is the maximum expression of the Ariston range. Thanks to the condensing technology, by recovering the energy of the exhaust fumes, it generates an increase in the calorific value which makes it possible to eliminate waste (of energy) and to obtain higher thermal efficiency than conventional boilers. Genus Premium Evo offers even greater performance thanks to the innovative technology that allows it to self-regulate according to variations in the external and internal temperature of the room, allowing energy savings of up to 35% compared to an older generation boiler. It is available in the heating and domestic hot water production version in 3 powers: 24-30-35 kW (sealed chamber).   Characteristics: Can be installed in partially protected places Large backlit dot matrix screen Continuous modulation high-efficiency circulator: for optimizing consumption and maximizing performance. Modulation ratio 1:10 - Automatic power regulation according to the heating request. Acoustic comfort guaranteed by the lower number of boiler on and off cycles, new silencer and sound-absorbing panels Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters  Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons  Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Clas Premium Evo thanks also to the high modulation ratio of 1:10, the continuously modulating pump and the presence of side sound-absorbing panels.  High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology   Ecodesign directive: from 2015 only new condensing boilers    After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling?       Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹.   How to read energy labels    There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

OFFER VALID UNTIL STOCKS LAST THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : Class One 24 Product code: 3301021 Power supply: methane Wi-Fi Optional Energy efficiency Energy efficiency class in heating: A Sanitary energy efficiency class: A Withdrawal profile : XL Combustion Nominal heat input in heating : 3.7 ~ 22.0 kW Nominal heat input in DHW : 3.7 ~ 26.0 kW Useful thermal power in heating: 3.4 ~ 21.4 kW Returns Efficiency at nominal heat input 60°/80°C : 97.5% Efficiency at nominal heat input 30°/50°C: 107.3% Return at 30% / 30°C : 109.8% Performance High temperature heating temperatures : 82° ~ 35° C Low temperature heating temperatures : 45° ~ 20° C DHW temperature : 60° ~ 36° C Quantity of hot water at 25°: 14.5 l/min Quantity of hot water at 35°: 10.4 l/min Minimum operating temperature : >0° C Minimum operating temperature with antifreeze kit: -5° C Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Absorbed electrical power: 77.0 W Degree of protection : X5D IP Dimensions and weight Dimensions (WxHxD): 400x745x315 mm Wall mounted condensing boiler Ariston CLAS ONE Ariston excellence guaranteed for 10 years thanks to the Protezione 10 total assistance programme. Latest generation condensing boiler set up for Wi-Fi connection with the CUBE S NET thermostat Prepared for Ariston NET With Ariston NET you have comfort at your fingertips. Remote control, consumption reports and online technical support, all in a free smartphone App Protection 10 The excellence of Series ONE is guaranteed for 10 years with the total protection 10 assistance program Small size Small footprint for easy installation New PER4MANCE system 4 technologies for exclusive performance New XtraTech TM heat exchanger, maximum quality. Absolute efficiency, energy class A+ Always connected with Ariston NET Full control, total comfort Heating with maximum duration over time with the XtraTech heat exchanger The new patented ExtraTech heat exchanger is the heart of the ONE condensing technology for heating, designed to guarantee performance with maximum durability over time Absolute efficiency, energy class A+ with Ignition System for improved functionality The ONE condensing technology and the thermoregulation accessories improve efficiency and performance, reaching up to energy class A+. Alteas ONE and Genus ONE are also equipped with the innovative Ignition System with electronic combustion control and gas adaptability. The system is able to automatically identify the characteristics of the gas, providing constant heating performance, advanced control and safety in all conditions Total Comfort Complete control is ensured every day with the thermo functions A unique set of innovative smart functions for a fast and stable heating temperature and easy customization able to satisfy every need Always connected with Ariston NET With Ariston NET it is possible to set, modify and control the heating, cooling and hot water temperature at any time, from your smartphone or PC, wherever you are Ariston quality forever at your home 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability A masterpiece of Italian style The improved design of the ONE Series is based on innovative lines, new materials and technological user interfaces for an even more comfortable experience. The touch screen display is a solution that allows easy management of the temperature, while the compact structure has been redesigned with internal components and a layout designed for easy access even with reduced dimensions. With the front panel in tempered glass, scratch resistant and easy to clean, Alteas ONE is made to withstand high temperatures and to always be super safe. Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: PRODUCT ARRIVES IN MID-FEBRUARY ARISTON EGIS PREMIUM EVO EXT 30 EU CONDENSING COMPLETE WITH METHANE FUME KIT - ErP Technical features Product code: 3300764 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 29/6.0 Max/min heating thermal power (80°C-60°C) kW 28.4/5.8 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 104.0 Efficiency at 30% at 30°C % 108.0 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 25/45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.2 Quantity of hot water ∆T=25°C litres/min 16.3 Quantity of hot water ∆T=35°C litres/min 11.6 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 82 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/505/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Standard: Sensys system manager with integrated time programming General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the Energy Certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Egis Premium Evo EXT EGIS Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). Simplicity and with reduced consumption thanks to the 1:4 modulation ratio and the high-efficiency circulator with continuous modulation. Operation only with methane gas. Characteristics: Wall mounted condensing boiler for outdoors with auto function Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Modulation ratio 1:4 Electro-galvanized casing for outdoors Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Anti-freeze, anti-limescale and anti-blocking circulator protection Aluminum isothermal primary exchanger Cold water inlet and heating return filters 60mm split exhaust Operation only with methane gas Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON CLAS EVO 28 CF EU BOILER Product code: 3300732 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: For heating and domestic hot water production Open chamber with natural draft Nominal heat input in heating max/min kW 29.5/13.0 Max/min heating thermal power (80°C-60°C) kW 26.7/11.2 Efficiency at nominal heat input % 90.6 Efficiency at 30% of nominal flow % 89.7 Performance stars (dir. 92/42/EEC) ★★★ Heating max/min temperature °C 35/ 85 Max/min domestic hot water temperature°C 36/60 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.5 Quantity of hot water ∆T=25°C litres/min 15.8 Quantity of hot water ∆T=35°C litres/min 11.3 Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 62 Degrees of protection of the electrical system IP X4D Dimensions (H x W x D) mm 770/400/315 METHANE power supply Evo class Conventional compact wall-mounted boiler with auto function The Clas Evo wall-mounted boiler is Ariston's solution for home comfort; it stands out for its innovative and captivating design and for its small size that makes it suitable for any type of furniture. It is available in the heating and domestic hot water production version in 2 powers: 24 and 28 kW (open chamber) Characteristics: Backlit multifunction LCD screen Continuous modulation high efficiency circulator Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Aluminum finned primary exchanger Arrangement for integration with system configuration through the new Bus Bridgnet® communication protocol Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 16 EU METHANE - new ErP model Product code: 3632258 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 28.0 Minimum thermal power kW 5.0 Modulation range 1 : 5.6 Nominal heat input kW 31.0 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 48 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 563 x 350 x 130 mm Weight: 12.8kg Power supply: METHANE Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON CLAS PREMIUM EVO 35 EU BOILER COMPLETE WITH LPG/METHANE FUME EXHAUST KIT Product code: 3300699 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 31/7.0 Max/min heating thermal power (80°C-60°C) kW 30.2/6.8 Efficiency at nominal heat input (60/80°C) % 97.6 Efficiency at nominal heat input (30/50°C) % 106.4 Efficiency at 30% at 30°C % 10.9 Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ?T=30°C) litres/min 16 Quantity of hot water ?T=25°C litres/min 19.3 Quantity of hot water ?T=35°C litres/min 13.8 Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 77 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/385 CNG or LPG power supply Kit for conversion from methane to propane supplied Wall mounted condensing boiler with auto function The Clas Premium Evo wall-mounted boiler, a new solution for domestic comfort that integrates the range of condensing boilers, the innovative technology capable of reusing the energy of exhaust fumes, increasing thermal efficiency and eliminating waste.Clas Premium Evo it stands out for its innovative and captivating design and for its small size that makes it suitable for any type of furniture. It is available in the heating and domestic hot water production version in 2 powers: 24-30 kW (sealed chamber). Characteristics: Backlit multifunction LCD screen Modulation ratio 1:4 Guaranteed acoustic comfort thanks to the new silencer Oversized modulating circulator Isothermal primary heat exchanger in stainless steel o Increased DHW exchanger Possibility to see all the detailed information on operation, performance and services, always available on the LCD screen. Product characterized by high energy performance, reduction of consumption and polluting emissions. Cold water inlet and heating return filters Arrangement for integration with system configuration through the new bridgnet® bus communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management 60mm split exhaust Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Clas Premium Evo thanks also to the high modulation ratio of 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 20 EU MET - new ErP model Technical features Product code: 3632259 Energy label specifications according to the European ErP directive Energy efficiency: Class B Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 36.1 Minimum thermal power kW 7.2 Modulation range 1 : 5.0 Nominal heat input kW 40 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow rate l/min > 3.8 Flow rate (ΔT 25°C) l/min 20 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 63 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 582 x 375 x 160 mm Weight: 17.5kg Power supply: LPG or methane Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON CLAS EVO 28 CF EU BOILER Product code: 3300732 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: For heating and domestic hot water production Open chamber with natural draft Nominal heat input in heating max/min kW 29.5/13.0 Max/min heating thermal power (80°C-60°C) kW 26.7/11.2 Efficiency at nominal heat input % 90.6 Efficiency at 30% of nominal flow % 89.7 Performance stars (dir. 92/42/EEC) ★★★ Heating max/min temperature °C 35/ 85 Max/min domestic hot water temperature°C 36/60 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.5 Quantity of hot water ∆T=25°C litres/min 15.8 Quantity of hot water ∆T=35°C litres/min 11.3 Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 62 Degrees of protection of the electrical system IP X4D Dimensions (H x W x D) mm 770/400/315 METHANE power supply Evo class Conventional compact wall-mounted boiler with auto function The Clas Evo wall-mounted boiler is Ariston's solution for domestic comfort; it stands out for its innovative and captivating design and for its small size that makes it suitable for any type of furniture. It is available in the heating and domestic hot water production version in 2 powers: 24 and 28 kW (open chamber) Characteristics: Backlit multifunction LCD screen Continuous modulation high efficiency circulator Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Aluminum finned primary exchanger Arrangement for integration with system configuration through the new Bus Bridgnet® communication protocol Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview ARISTON EGIS PLUS 24 CF EU METHANE BOILER - NEW ErP 2016: Compact wall-mounted boiler with open chamber and natural draft. Technical specifications Product code: 33001807 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitaryware energy efficiencyprofilXL Class B Characteristics of heating/sanitary exercises: For heating and domestic hot waterÿ Open chamber with natural draft Nominal heat input in heatingmax/min kW 25.8/11 Heating max/min heat output (80øC-60øC) kW 23.7/9.9ÿ Efficiency at nominal heat input % 91.9 Efficiency 30% of nominal flowÿ% 91.2 Performance stars (dir. 92/42/EEC) Heating max/min temperatureÿøC 35/ 85ÿ Sanitary max/min temperatureøC 36/60 Specific flow rate in sanitaryware (10 min. with T=30øC) litres/min 11.3 Quantity of hot water T=25øC litres/min 13.6ÿ Quantity of hot water T=35øC litres/min 9.7 Supply voltage/frequency V/Hz 230/50ÿ Degrees of protection for electrical systemsIP X4Dÿ Dimensions (H x W x D) mm 745/400/315ÿ METHANE power supply Features list Egis Plus Conventional compact wall-mounted boiler The wall-mounted boilerÿEgis Plusÿ is the solution for domestic comfort signed by Ariston; it stands out for its installation flexibility, covered hydraulic connections and dimensions. It can be integrated into solar systems and, thanks to the easy front access system, allows extreme maintainability without the need for tools. It is available in the heating and domestic hot water production version: 24 kW (open chamber). Characteristics: Digital multifunction display Continuous modulation high efficiency circulator Predisposition for on-off thermoregulation Predisposition solar systems natural circulation Self-diagnosis system by code Mono-temperature zone management Primary heat exchanger in copper Double exchanger technology Integral minimum pressure switch Cold water inlet filters and heating return High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the system temperature, guaranteeing boiler performance and reducing electricity consumption. Optimizing thermal efficiency.ÿ Optimization of comfort with constant temperature.ÿ Maximum silence. Ecodesign Directive: In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less