Magnetic dirt separator filter APE fittings 3/4" cod 3DEF34 Characteristics Code: 3DEF34 Size: G 3/4” GRIVORY body Cap VA66 - FV30 Brass ball valve NBR O-rings Filtration degree 800 microns OPERATING CONDITIONS: • Fluid compatibility: water, water + glycol. • Max. pressure operating pressure: 6 bar 90 °C. • Operating temperature: 4-90°C. Ape Raccorderie Dirt separator The APE magnetic dirt separator filter is an excellent solution to deal with the various system problems due to impurities present in the water (especially rust and sand) which are created as a result of corrosion and encrustations during normal operation of a heating system. The APE filter guarantees continuous protection of the boiler, preventing the circulation of these micro particles in the system, thus preserving the most sensitive components such as the circulator and the heat exchanger. The APE filter must be installed on the return circuit, at the boiler inlet. Thanks to its remarkable versatility, it can be installed both with a horizontal and vertical body, making it easily adaptable even in small spaces. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

.

Read more less

ADDITIONAL ITEM FOR ASSEMBLY: SILICONE GASKET COD. SAVGUS80N AND ITS SIZE VARIANTS.

Read more less

SMOKE VENT TERMINAL FOR GAS BOILER. WINDPROOF, WALL INSTALLABLE OR DIRECTLY ON THE BOILER. IT PROMOTES THE DISPERSION OF HEAT AVOIDING THE FORMATION OF CONDENSATION AND AT THE SAME TIME IT OPTIMIZES THE EXHAUST OF FUMES AVOIDING BLOCKAGE.

Read more less

General characteristics EAN: 8052646068694 Typology: Single wall Data sheet Length: 500mm Diameter: 200mm Thickness: 0.5mm Material: AISI 304 stainless steel

Read more less

ATTENTION If you want to pay cash on delivery, you must pay 10% of the total purchase as a deposit. General characteristics Article code: 10.E Typology: Single wall Model: Universal (for square chimneys) Material: pre-painted sheet metal Other: product complete with six-speed control unit Data sheet Materials used: Dark brown sheet metal, stainless steel and copper Available sizes: the round base product is made as standard in diameters of 250 mm or 350 mm, both male cup. The square base product is made as standard with an adjustable flange that adapts from the 320 x 320 mm size to the 420 x 420 mm size. Engine data Power: 0.18KW Voltage: 230V Frequency: 50Hz Insulation class: F Degree of protection: IP55 Sound pressure: 40 d(A) Intensity: 1.9A Revolutions: 1.350/min Control unit components 230V single-phase autotransformer Voltages: 70-90-130-230V Illuminated bipolar switch 6A fuse Rotary switch with 4 suction speeds Product data Flow rate: 1,000 m3/hour (estimated in ideal conditions at average speed) Pressure: 200Pa Suction: multi-speed Weight: 20kg Preparation on pallet: mm 1,050 x mm 1,200 and height mm 2,080: contains 20 pcs The cable required to power an electrical terminal from the control unit to the engine must be of the FROR 450/750 V 3x1.5 mm2 type (index 3 indicates the number of wires inside the cable, earth-phase and neutral; the 1.5 mm2 indicates the surface condition that the individual wires inside the cable must have), the operating temperature ranges from -15 degrees to 70 degrees. If the cable passes near sources of heat exceeding 100 degrees, the FROR type cable is not indicated; for these applications we recommend a thermo-resistant cable with silicone sheath, having the same dimensional characteristics as FROR, but with a wider operating temperature range ranging from -20 degrees to 200 degrees. Applications On the roof, on ducts intended for the disposal into the atmosphere of fumes generated by the combustion of wood-burning appliances, or air, in the case of environments where recycling is required. Compliance: EN 16475 "Chimney-Accesories-Part 2:Chimney fans-Requirements and test methods" 73/23/EEC Low voltage 89/336/EEC Electromagnetic compatibility 89/392/EEC Machine safety 93/68/EC CE marking 02/96/CE Waste electrical and electronic equipment Description The electric aspirator has been designed to definitively solve fumes disposal or air draft problems. It finds application whenever we find ourselves solving problems on devices without air intakes, installed in almost hermetically closed environments by increasingly sealed fixtures. Equipped as standard with a variable speed power unit, it is able to depressurize the duct/system by creating forced suction inside it. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ANGLE FULL BORE BALL VALVE FOR GAS, WITH BUTTERFLY, NICKEL PLATED.

Read more less

ADDITIONAL ITEM FOR ASSEMBLY: SILICONE GASKET COD. SAVGUS80N AND ITS SIZE VARIANTS. FEMALE ATTACHMENT IN THE CENTER

Read more less

FOR AUTOCLAVES AND SANITARY APPLICATIONS. AMBIENT TEMPERATURE RANGE:055C. FLUID TEMPERATURE RANGE: 055C. 1/4" FEMALE CONNECTION. PROTECTION DEGREE IP44.

Read more less

Italkero Digital Wireless Control for Stratos/Poster Gas Stove Radiator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Honeywell Wall-mounted Digital Programmable Chronothermostat T4 cod. T4H110A1022 Operating modes Off (frost protection), manual, time program, time override, temperature override Control functions 4 or 6 temperature ranges Heating/Cooling application Heating only Time setting resolution 15 minutes Scheduled daily on/off periods 4/6 Holiday Mode Yes Optimization Yes Temperature setpoint for day Selectable from Thermal anticipator Yes Approvals EMC:2014/30/EU LVD: 2014/35/EU R and TTE: 1999/05/EC WEEE: 2012/19/EU Wireless LAN: IEEE 802.11b,g,n RF Communications: ISM 868.0-870.0 MHz Receiver Category 2 ErP class IV Internal sensing element position Temperature setting range 5 ... 35 oC Temperature control accuracy 0.5 oC Setpoint lock Yes Setpoint limitation Yes Control output signal Dry contact relay and OpenTherm(R) Contact type/Rate 230Vac, 5A Display type Fixed segment display Double insulation grounding External dimensions (HxWxD) 97 mm | 136mm | 28mm Protection class IP30 White color section max. of cables 1.5 mm2 Battery autonomy 2 years Power supply 2 AA batteries Memory back up yes Ambient temperature 0 ... 40 oC Time display format pre-set 24 h Description T4 Wired Southern Europe version HoneyWell T4 The T4 and T4R thermostats are designed to provide automatic temperature control as a function of time, in domestic and small commercial applications T4: Compatible with 24V and 230V applications such as boilers, combi boilers and heat pumps T4R: Compatible with 24V and 230V and OpenTherm (R) applications, such as boilers, combi boilers and heat pumps Compatible with zone valves, but not with 240V electric heating Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

HIGHLY FLEXIBLE PIPE MANUFACTURED WITH PARALLEL WAVE CONTINUOUS WALL IN AISI 316L STEEL. STAINLESS STEEL BRAID, WELDED TO THE END FITTINGS TO REINFORCE AND ALLOW THE TENSILE RESISTANCE OF THE PIPE. COVERED WITH A SMOOTH SHEATH IN TRANSPARENT PLASTIC MATERIAL FOR PROTECTION AGAINST EXTERNAL AGGRESSION. FITTINGS WITH STAINLESS STEEL THREAD.

Read more less