Technical features The Omni Container kit has been designed to keep the installation space to a minimum for built-in boilers in external and internal walls. The lower part of the frame is equipped with the holes necessary for the water, gas, electricity, condensate drain connections and for the connection of the Remote Friend Command. In the upper part there are the holes for the exit to the flue ("type B" and "type C" installations) and to the intake duct (only for "type C" installation) with the use of the type of flue marked Immergas. Warning : The installation of the Omni Container kit inside the wall must ensure stable and effective support for the boiler. This kit ensures adequate support only if inserted correctly (according to the rules of good practice) by following the instructions below. The Omni Container kit is not a load-bearing structure and cannot replace the removed wall, so it is necessary to check its positioning inside the wall. For safety reasons, it is necessary to properly seal the housing compartment of the niche in the masonry wall, in compliance with current regulations. NB: leave the front drain holes located under the hatch (4) free. Otherwise, if water were to enter, it would not be able to get out. - Insert the frame in its seat, remembering to open the four support flaps (2) before inserting it. - Once the frame has been installed, the boiler can be inserted by hooking it to the support hooks located on the bottom of the frame itself. Dimensions (HxWxD): 1190x566x254 Product guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS MODULATING FRIENDLY REMOTE CONTROL MODEL CAR V2 3021395 Device class V or VI Seasonal Energy Efficiency Rating 3% or 4% Device dimensions (H x W x D) mm 103 x 142 x 31 Weekly programming on 2 temperature levels (comfort-reduced) Easy and intuitive controls (based on traditional knobs) Adjustable antifreeze function Regulation 9 fixed climatic curves (if external probe connected) Climatic curve self-adaptation function Thermal inertia setting of the building Holiday program CAR MODULATING REMOTE FRIEND COMMAND v2 All Immergas chronothermostats can be connected with just 2 wires. In addition to the functions illustrated in the previous point, the panel of the Remote Friend Control V2 allows the user to have under control and, above all, at hand, all the important information relating to the operation of the appliance and the heating system with the opportunity to easily intervene on the previously set parameters without having to move to the place where the appliance is installed. The Amico Remoto V2 remote control panel is equipped with self-diagnosis to show any boiler operating anomalies on the display. The climatic chronothermostat incorporated in the remote panel allows the system delivery temperature to be adapted to the actual needs of the room to be heated, so as to obtain the desired room temperature value with extreme precision and therefore with evident savings on running costs. It also allows display the ambient temperature and the actual external temperature (if the external probe is present). The chronothermostat is powered directly by the boiler via the same 2 wires that are used for data transmission between the boiler and the chronothermostat. Important: in the case of a system divided into zones using the special kit, the CARV2 must be used excluding its climatic thermoregulation function, i.e. setting it in On/Off mode. The CARV2 is ideal for the models VICTRIX 26 kW, VICTRIX 26 kW Plus, VICTRIX 12 kW X, MAIOR EOLO/NIKE, MAIOR EOLO 24 VIP, MAIOR EOLO X 28 and MINI EOLO/NIKE. It can also be combined with the models: VICTRIX Zeus Superior kW, VICTRIX Zeus 26 kW, VICTRIX Superior kW, VICTRIX Superior 32 kW Plus, VICTRIX Mini kW, EOLO Extra kW HP, EXTRA Intra kW HP, ARES Condensing 32, EOLO Superior kW, EOLO Eco kW, NIKE Mini 28 kW, EOLO Star 24 kW, NIKE Star 24 kW, ZEUS Superior kW, ZEUS kW, AVIO 24 kW and HERCULES versions. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Immergas Magnetic cycloidal filter kit 3.024176 Cycloidal filter kit: Magnetic cycloidal filter kit Extremely compact dimensions It allows to intercept the ferrous residues present in the system water. The two standard taps in the kit allow easy maintenance by cleaning the filter without having to empty the circuit PRODUCT DESCRIPTION. The magnetic cycloidal filter allows to intercept the ferrous residues present in the system water. Thanks to the two taps in the kit, it is possible to carry out easy maintenance by cleaning the filter without having to empty the circuit. WARNINGS. The magnets resist up to the maximum temperature of 100 °C, it is therefore advisable not to exceed a temperature between 90 - 95 °C. Magnetic fields: Keep the magnet away from all objects and equipment that could be damaged by the magnetic fields themselves. The magnetic field can affect the operation of pacemakers and internal defibrillators, for safety keep the magnet at a safe distance. CLEAN FILTER. Disconnect power from the boiler, close the tap a upstream of the filter, partially relieve the pressure of the hydraulic circuit (see appliance instruction booklet) then close the second tap of interception (2). Warning: check the water temperature system return pipe is not excessively hot otherwise take precautions to avoid sunburn. Place a container under the filter to collect the water contained in it. Extract the fork and remove the magnetic cartridge pulling it down. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less