Beretta Mynute Rain Green E 25 Csi Box Condensing Boiler Complete With Smoke Exhaust Kit - New Erp

ATTENTION FOR THE GAS TRANSFORMATION, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE

BERETTA MYNUTE RAIN GREEN AND 25 CSI BOX CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP

• Code: 20096647

Energy label specifications according to the European ErP directive

• Class A heating energy efficiency
• Sanitary energy efficiency profile XL Class A
• Characteristics of heating/DHW operation:
• Heating nominal heat input: 20 kW
• Sanitary nominal heat input: 25 kW
• Classification European Directive EEC 92/42: ****
• Quantity of hot water with Δt=25°C: 14 l/min
• Dimensions (hxlxp) mm 1223 x 654 x 255 + 26
• Net weight of boiler + box kg 39+20
• METHANE power supply
• C (heating + sanitary water)
• S (sealed chamber)
• I (electronic ignition, ionisation control)
• Exclusive services: Beretta offers 5 or 10 years of peace of mind thanks to the Kasko warranty extension formulas.

Standard:

BeSMART Remote Control Panel and external probe in the BOX version (class A+)

General characteristics

1) Mynute Rain Green E BOX - ErP

The new Mynute Rain Green E outdoor range (down to -10°C with special kits), offers three models suitable for "wall" installation and a specific version for "recessed" installation. Designed following the ecodesign indications provided for by the European ErP Directive, it is made up of combined and heating only models. The boilers have a higher power in DHW operation thus offering greater comfort. Mynute Rain Green E is equipped with the new front access condensing exchanger which allows high yields (94% seasonal yield) and with the new low consumption modulating circulator which can be configured according to the type of system. Mynute Rain Green E is compatible with the optional BeSMART WiFi Comfort Control Kit which allows remote comfort control from smartphones and tablets using special free APPs and together they form a class A+ system. Mynute Rain Green E is compatible with the new Ø 50 mm flue with which it is possible to carry out ducting up to 49 m (25 CSI and 25 RSI versions).

2) Mynute Green E: high energy efficiency, reduced gas consumption and low emissions.

The entry into force of the European Directive ErP (26.09.2015) provides that even generators for the production of heating and domestic hot water are classified through the appropriate energy label indicating the class. Compulsory labeling provides greater transparency on the characteristics of the products which can be easily compared, helping the user to find those with greater efficiency. Consequently, even with boilers it will be easier to contribute to the achievement of the "20-20-20" objective set for the year 2020 which consists of: reducing greenhouse gas emissions (CO2 ) by 20%, increasing by 20 % use of renewable energies and reduce energy consumption by 20% in EU countries.

3) The new Beretta condenser exchanger with front access

The Mynute Green E boiler is equipped with the new Beretta condensing exchanger with front access. An innovative system of guides allows it to move like a drawer, making disassembly for cleaning required by current regulations much faster. Continuous research has allowed Beretta to obtain an exchanger characterized by a considerable increase in performance: 94% average seasonal efficiency calculated according to the European ErP Directive. The exchanger comes from a single aluminum tube, without welding thanks to an innovative production process. The high thermal conductivity of aluminium, much higher than that of steel, allows for greater uniformity in temperature distribution. The single pipe architecture (series circuit) allows for a large section for the passage of water with the advantage of reducing pressure drops and preventing the deposit of impurities, keeping the exchanger performing over time. With the new Beretta condensing exchanger, boiler performance improves up to an average seasonal efficiency of 94%.

4) Flex modulating circulators: optimized performance, low consumption

Mynute Green E uses a synchronous modulating circulator with low energy consumption, as required by the European ErP Directive. Thanks to this new technology, the electric motor of the circulator offers an Energy Effi ciency Index of less than 0.20, which means significantly reduced electricity consumption. The new circulator works proportionally to the power supplied by the boiler, thus contributing to a further reduction in electricity consumption. In case of need on the heating system, it is possible to change the head without having to replace the standard circulator with a high head one, the name “Flex” derives from this feature.

Up to 49 meters of ducting

With Mynute Green E it is possible to comfortably intubate even the most "difficult" flues thanks to the approval for flue Ø 50mm. The main 50mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power.

The simplicity of comfort

The management, simple and intuitive, favors the understanding and use of all the functions. There are two control selectors for setting the adjustment functions: heating temperature selection knob and domestic hot water knob. Boiler status indications are shown on the display. The filling of the system is carried out simply thanks to the practical filling cock and the visible control hydrometer.

[ 1 ] Digital display
[ 2 ] Selector on/off/summer/winter/reset/heating temperature/activation of the Clima Amico system
[ 3 ] Domestic hot water temperature selector/preheating activation
[ 4 ] Hydrometer

Characteristics:

• Class A+ system without the addition of options
• Specific for use in built-in BOX
• Low consumption modulating circulator (6 m head)
• Low polluting emissions: class 5 (UNI EN 483)
• New condensing exchanger in aluminum with high flow rate and front access
• Thermoregulation with standard external probe
• REC 08 remote control panel as standard
• Antifreeze kit available up to -10°C (optional)
• Possibility of intubating flues with the special flue ø 60 in PP and ø 50 in PP
• IPX5D electrical protection degree
• Plumbing fittings, gas and sanitary taps supplied
• For gas conversion, contact authorized Beretta Technical Assistance Centres

Product Guarantee

All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

• peso: 50.0 kg
• classe energetica produzione acs: A
• classe energetica riscaldamento: A
• gas: Methane
• marca: BERETTA
• metri quadri : 150
• modello: CALD_20096647
• potenza in kw: 25
• potenza nominale: 25
• superficie riscaldabile mq: 150