Overview GAS WATER HEATER BAXI mod. ACQUAPROJET 11I METHANE, Open Room WITH NATURAL DRAFT. Technical specifications Gas instantaneous water heaters Chamber Open to natural draught Nominal heat input kW 21.8 Nominal thermal power kW 19.2 Minimum thermal power kW 7.7 Minimum heat input kW 8.8 Operating water pressure 0.2-6 bar Water withdrawal range l/min 3-11 Maximum outlet water temperature C 65 Discharge pipe diam. 113mm Dimensions hxwxd mm 585x360x220 ; kg 10.5 METHANE version Features list ACQUAPROJET: the NEW instantaneous gas water heater Baxi offers a new instantaneous gas water heater, with Open Chamber and 2 Chamber models - Sealed Chamber water heaters of 11 and 13 l/min Open Chamber Models 11- 13 l/min Battery electronic ignition Electronic detection of flame presence Gas valve with modulation proportional to the water flow rate to keep the outlet temperature stable Minimum ignition flow 2.9 l/min Battery status LED indicators LPG conversion kit available as an option Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

VAILLANT GAS WATER HEATER for outdoor outsideMAG IT 16-5/0-5 METHANE Technical features ErP energy class: Class A Sanitary load profile: XL Reduced heat output - nominal kW 7.7 - 31.0 Permissible operating pressure range 0.2 - 10 bar Domestic hot water regulation temperature °C 38-60 Minimum hot water flow l/min 2.5 Domestic hot water production (ΔT = 25K) l/min 16.0 Domestic hot water production (ΔT = 35K) l/min 11.4 Power supply V/Hz 230/50 Total electric power W 123 Electric power without antifreeze device W 51 Dimensions HxDxL mm 609-180-413; 21 Kgs Sound power dBA 68 IP degree of protection IP X5D OutsideMAG The outdoor water heater that you control from the inside: simple to install and no encumbrance inside the house. The outsideMAG range of water heaters was designed and built to be installed outside the home and, thanks to the standard antifreeze protection, to withstand temperatures down to -25°C. The new version of outsideMAG water heaters has undergone significant improvements in domestic hot water production performance. The new forced draft outdoor versions with DHW flow rates of: 11, 14 and 16 litres/minute with Natural Gas and LPG, guarantee perfect temperature stability in dispensing. Vaillant has designed this new range to operate outside the home by increasing protection up to -25°C, as standard. They are very simple to install and do not require connections to the flue since they have a front outlet already integrated in the front panel (Type A approval). The new outsideMAG water heater stands out for its modern design that can be inserted in any external environment. The exclusive front air intake always ensures the right supply of oxygen for the correct functioning of the appliance, also giving it an unmistakable aesthetic touch. The materials used are particularly thick and designed to last over time even in contact with the elements. Touch interface for very simple comfort management. A special function allows to reduce the risk of overflowing from the tank during the DHW outlet through a loud acoustic signal. outsideMAGs are very simple to install. If there is no flue it is possible to install them anyway since they have a facade exhaust already integrated in the front panel (type A approval). For installation checks, always contact a qualified installer. They can be positioned on the balcony in a suitable position that complies with the regulations in force and the minimum distances to also facilitate the performance of any maintenance operation on the appliance. The new outsideMAGs are also characterized by a modern and sober design conceived to fit harmoniously into any type of external environment, from the balcony, to the terrace, to the veranda, to the garden. The outdoor water heater The Vaillant outsideMAG range of outdoor water heaters is available with volumes of 11, 14 and 16 liters per minute (in natural gas and LPG versions) to meet any domestic hot water need in a residential setting. All operations on the water heater are managed from inside the home. Thanks to the multitouch control panel, supplied as standard with the outsideMAG, you just need to touch the display functions with a touch of your finger to increase the water temperature whenever you want. But not only. You can also set the amount of water needed to fill the bathtub, thus preventing it from overflowing (bathTUBE function). Through the display it will always be possible to keep the water temperature and, in general, the functioning of the water heater under control. The compact dimensions of these outdoor water heaters allow installation even in the smallest niches. Never before so much comfort in so little space. High hot water production (up to 16 l/min) Equipped with acoustic signaling system to prevent water from escaping from the bathtub Reliability of every single component tested by Vaillant LabTest Frost protection down to -25°C Equipped with multitouch display to control the appliance from inside the home Where possible, it does not require a fume exhaust Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER AD 5 - Storage water heaters ARISTON S/SGA 80 METHANE. Open Room WITH NATURAL DRAFT Technical specifications 5 gas water heaters - Storage water heaters Capacity: 77 litres Heating power: 5200W Useful power: 4400W Heating temp. (T= 45C): h, min 1.00 Water at 40C in one sample: 116 litres Continuous water 40C: 96 l/h Water in the first hour at 40C: 212 l Consumption of gas: m3 /h 0.370 Consum gas liquid: Kg/h 0,275 Max working pressure: 8 bar Small weight: 27 kg Dimensions: 490 x 305mm Main features S-EMS GAS WATER HEATER AD 5 - Storage water heaters S/SGA the gas-fired water heater with pilot flame suitable for domestic installations. It is equipped with a magnesium anode functional to the electrochemical protection of the boiler in stainless steel and is also equipped with a stainless steel smoke deflector which guarantees greater efficiency. S/SGA allows the user to adjust the temperature thanks to the knob placed on the front and the fact that it does not require electrical connections means that it is easy to install. Born ready for methane gas at all times temp convertible to LPG using the nozzle kit included in the packaging. It is available in capacities of 50 - 80 - 100 l. Advantages: Enamelled boiler Magnesium anode Piezo ignition system Prepared for methane gas LPG (nozzle kit included) Operation without electrical connections Works even at minimum water pressures Triple safety valve Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER RINNAI INFINITY 16I INTERNAL LPG COMPLETE WITH FUME KIT Code: REU-16FUA Instantaneous gas water heater with electronic ignition and ionization flame sensor Colour: Euro White Installation: internal Forced draft sealed chamber Dimensions (hxwxd): 67.5x37x13 cm; 15 Kgs Thermal inputs (min/max): 4.7 / 34 kW Hydraulic flow rate (min/max): 2.4 / 16 l/min Standard antifreeze: down to -15°C LPG version INFINITY Infinity is the line of Rinnai gas water heaters which represent the new frontier in the production of hot water, both for their SIMPLICITY of INSTALLATION and for the COMFORT (each Infinity device is equipped as standard with a remote control on which to set the desired water temperature guaranteeing all the pleasure of unlimited hot water at a constant temperature) and SAVING (Each appliance is equipped with "continuously modulating" gas valves which regulate combustion in an extremely efficient way, reducing waste) which are able to guarantee. Available in various flow capacities, from 11 to 32 l/min, they are able to meet any hot water need, even the most demanding. Infinity appliances run on gas and are available in natural gas, LPG and propane air versions (for the Sardinia region). Infinity water heaters have electronic ignition (without pilot flame) and forced flow (both in the indoor and outdoor versions) and are activated only when there is a real request for hot water (when the tap is opened) without the need for expensive storage tanks. DOMESTIC RANGE: Superior performance in small denominations The domestic Infinity range , intended for residential use or small commercial businesses, is divided into appliances for outdoor installation (11, 13, 16, 20 liters per minute) and indoor (11.16 liters per minute). Through the standard remote control on all devices (on the dashboard, which can be remotely controlled, for Infinity 11 and 16 inside cs), not only is the pleasure of having hot water exactly at the desired temperature guaranteed, without the need for mixing or waiting times, but you will also have the total security of never getting burned (especially useful for weak users such as children, the elderly and the infirm) The compact dimensions and modern aesthetics make both indoor and outdoor installation absolutely pleasant. INFINITY 16 I The infinity 16 Internal sealed chamber is an instantaneous domestic hot water producer for internal installation with electronic temperature management and water flow control. Anti-corrosion enamelled stainless steel casing and remote electronic control, positioned on the front panel, with temperature management and self-diagnosis function. Max operating temperature equal to 75° C DHW circuit connection: Cold water: R 1/2" male shut-off valve; Hot water: R 1/2" male shut-off valve; Gas connection and electricity supply: Gas: R 1/2" male shut-off valve; Power supply: AC 220V 50Hz. NB: FOR INDOOR INSTALLATION IT MUST BE INSTALLED IN A VENTILATED PLACE Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

COMPATIBLE WITH THE 50 AND 80 LT STEATITE MODEL

Read more less

Technical features Model : Extra+ 10 Product code : A7110896 Capacity : 10 litres Installation : Under sink Energy Efficiency Class: B Power : 1200W Voltage : 230V Load profile : XXS Dimensions and weight Dimension (Height x Diameter): 456X255 mm Weight : 6 Kg Electric water heaters Baxi EXTRA+ line The philosophy that has always guided Baxi is to propose technologically advanced but easy-to-use solutions, offer a 360° service and develop products that meet the needs of users. The wide range of products that has brought Baxi to the role of leader in the heating market takes shape in this perspective: in addition to boilers and heating systems, Baxi has developed a wide range of electric water heaters with capacities from 10 to 100 litres, available both rapid and accumulation with capacities from 10 to 100 liters and the possibility of both vertical and horizontal installation . The labeling regulation (EU Regulation 2017/1369) requires water heaters to be labeled according to a decreasing energy scale ranging from A+ to F. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products Main features • 2 year guarantee • Boiler in glass-porcelain steel • Ohmic protection (reduced magnesium anode consumption) • CFC-free polyurethane insulation • Operating light • IP24 degree of protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli SKY ECO 14F Low NOx gas water heater complete with methane fume kit - NEW ERP Class (Class G - A) A XL load profile Nominal heat input Max kW 26.9 Thermal power Max / Min kW 24.2 / 9.37 Maximum working pressure 10 bar Maximum sanitary production Δt 25°C / Δt 30°C l/min 13.9 / 11.6 Power supply V/Hz 230 / 50 Dimensions HxL 595x335 mm New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. Sky ECO F Sealed chamber gas water heater, with modulating thermal power and electronic control of the. Combustion. LOW NOx fume emission and SUN EASY system for direct coupling to a solar thermal system SUN EASY Easy... Cheap... Brilliant The SKY ECO range has been designed to be easily integrated with thermal solar systems, with natural or forced circulation. The temperature of the water coming from the solar circuit is constantly monitored and the water heater burner is turned on only if it is not hot enough. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. The heart of water heaters All ECO series water heaters comply with the very strict restrictions on the emission of fumes into the atmosphere, imposed by European regulations. The burners in the ECO range use a particular technology which consists in keeping the flame temperature very low, keeping the gas trains wet. This expedient makes it possible to go well below the limits imposed by the ErP directive which sets the NOx limit at the threshold of 56 mg/kWh. Copper exchanger Interface displays Continuous power modulation Methane / LPG / Propane air Solar systems Also outdoor installation in protected places Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

NB Article out of production in case of unavailability of the product the new model NEXT EVO X 11 will be shipped Technical features Product code: 3632160 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 19.5 Minimum thermal power kW 4.5 Modulation range 5 - 21.5 Nominal heat input kW 21.5 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 11.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 37 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Nominal capacity 155l Energy class B L withdrawal profiles Thermal power 5.5 kW Useful power 5.12 kW Heating time (ΔT= 45°C) 48 min Nominal pressure 8 bar Dimensions: General characteristics SGA BF X Low NOx: ErP compliant 09/26/2018 Operation without electrical connections Enamelled boiler Magnesium anode Piezo ignition system Prepared for LPG transformable methane gas (nozzle kit included) Coaxial smoke outlet diam. East. 100mm, length. max. 900mm Operation even at minimum water pressures Triple safety valve Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas Water Heater Watertight Chamber Biasi mod. 14S complete with smoke exhaust kit Model: 14s water heater Electronic ignition - Flame modulation Technical features: Maximum useful power kW 24 Nominal heat input kW 28 Efficiency 84 % Natural gas consumption (G20) (kcal/mc) m3/h 3.0 Propane consumption (G31) (kcal/kg) kg/h 2.1 Maximum water flow 14 l/min Minimum water flow l/min 2.7 Minimum water pressure bar (kPa) 0.5 (50) Maximum sanitary pressure bar 10 Dimensions without packaging (HxLxP) mm 627-348-240 Power supply: methane Biasi water heater Scaldacqua is the gas water heater for the instantaneous production of domestic hot water. it is available in the open chamber versions, with useful power of 19.0 kW (11 litres) and 23.7 kW (14 litres) and in the sealed chamber version, with useful power of 22.5 kW (8 litres). The compact dimensions and linear aesthetics allow for easy installation of the Water Heater inside the home. In particular, Scaldaqua 14S, being of type C, watertight, is exempt from most of the limitations deriving from the ventilation of the rooms and can also be installed in narrow rooms without volume restrictions. Sealed chamber modulation: It is equipped with an electronic board for continuous modulation of the power supplied, according to the temperature set by the user; moreover, the power of the burner depends on the amount of water required. In these modes, the appliance only consumes the quantity of gas that is strictly necessary. Control panel: ON-OFF knob: in the ON position, the display shows the adjustment temperature of the hot water set with the temperature adjustment knob and if there is water drawn from the top left, the flame symbol lights up (burner on) . Temperature adjustment knob: the hot water temperature can be adjusted between 35 and 60 °C by turning the adjustment knob. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OFFER - Immergas CAESAR EXTRA 11 CS Methane Gas Watertight Chamber Outdoor Water Heater cod. 3.028687 low NOx ErP Efficiency class Heating efficiency class A Sanitary efficiency class M Sanitary Rated power min/max kW 19.3 Hot water production (∆T 25 °C) l/min* 11 generals Approved for outdoor use in a partially protected place Electronic ignition Dimensions (HxWxD) mm 619 x 304 x 243 CAESAR EXTRA Instantaneous water heater with sealed chamber , low NOx, for outdoors Low NOx combustion system Approved for outdoor installation only in a partially protected place Standard antifreeze resistance up to -15 °C They do not require a flue Electronic ignition and modulation Equipped with LCD display and encoder knob Solar function for combination with solar thermal systems Excellent hydraulic sensitivity with minimum operating water pressure Fixing dowels and standard bracket Optional connection unit IPX5D electrical protection degree Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Heat pump water heater Ferroli EGEA LT 200 A+ Wi-Fi integrated Technical features Product code: 2COBA04F Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Characteristics of heating/DHW operation: Nominal accumulation capacity l 192 Maximum capacity of hot water at 40°C l 273 Accumulation dispersion W 63 Average electrical power absorbed Wel 430 Dimensions (Ø x H) mm 621 x 1607 Nominal air flow m3 /h 350/500 Power supply parameters V-Hz 230V - 50H Protection class IP24 Sound power indoors Lw(A) dB(A) 52 Anti-legionella system AutomaticAnti-corrosion system n. 1 Mg anode Operating modes Auto, Eco, Boost, Elec. Heater, Fan EGEA EGEA is a brand new range of storage heat pump water heaters for the production of domestic hot water, suitable for small residential applications. It is a smart solution for heating sanitary water, which uses electricity, air and possibly solar thermal and photovoltaic energy, leaving out the use of traditional fuels. Efficiency, ecology, flexibility and the new aesthetics are the characteristics that distinguish EGEA and differentiate it from a traditional electric water heater . * The 90 and 120 LT models use R-290 gas, a valid “green” alternative to the most common high GWP (Global Warming Potential) refrigerants in the sector. It is a naturally occurring hydrocarbon (HC) with a GWP of 3 and an ODP (Ozone Depletion Potential) of 0 FEATURES at a glance... EGEA mod. 90 / 120 / 200 / 260 EGEA is an air-water heat pump for the production of domestic hot water, storage in an enamelled steel tank, externally wound condenser for maximum safety and hygiene. > Maximum temperature equal to 62°C obtained from renewable energy with heat pump only or by electric resistance (up to 75°C). > Digital interface with programmable TOUCH keys. > Integration via Solar Thermal (LT-S model) or via Electric Resistance (up to 75°C) on all models. > Integration with the Solar Photovoltaic system. INCENTIVES... when saving is a must. EGEA exploits all the features and technology of air-to-water heat pumps for the production of domestic hot water. Only 25% of the The system's energy requirement comes from electricity. FERROLI is at your disposal for technical and documentary support to take advantage of the incentives provided by the Ministerial Decree 02/16/2016) and subsequent extensions and amendments. ELECTRONICS... easier than that! The EGEA user interface features a very simple and intuitive display. > White backlit LEDs for temperature and function management. > Red backlit LEDs for alarm warnings. > The 4 side TOUCH buttons allow EGEA to be switched on/off ( ); navigation in the MENU ( ) and the increase ( + ) or decrease ( - ) of the setting values. INTEGRATION... EGEA gets along with everyone All versions of EGEA provide for the possibility of using renewable energy supplied by a photovoltaic system (electricity) or by a solar thermal system (thermal energy). The latter solution is possible ONLY for the 200 LT-S and 260 LT-S versions, whose tank houses a dedicated coil as solar exchanger. The use of this auxiliary energy source is activated and set via dedicated commands directly by the user. PHOTOVOLTAIC SYSTEM EGEA is able to manage the surplus Electricity supplied by a Photovoltaic System through the signaling of the Inverter through a clean contact. In this mode, EGEA will prepare domestic hot water at a higher (settable) temperature Set Point than the ECO/AUTO modes, thus allowing you to exploit the free energy available. But for those who want more .. . The EGEA heat pump water heaters have a WiFi module integrated into the product as standard so that they can be connected to the home WiFi network (WiFi router) and therefore be controlled via the APP. By downloading the dedicated EGEA SMART App for free, you can fully manage EGEA at any time Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less