Air Conditioner Mitsubishi Electric Trial Split Inverter Series AP 9+9+12 with MXZ-3F68VF R-32 Wi-Fi Optional Plus Model 9000+9000+12000 Technical features Indoor units: 1) Model: Indoor unit catalog code : 2 x MSZ-AP25VG Power (BTU/h) 9000 Indoor Unit HxWxD (mm) : 299 x 798 x 219 ; 10.5kg 2) Model: Indoor unit catalog number : 1 x MSZ-AP35VG Power (BTU/h) 12000 Indoor Unit HxWxD (mm) : 299 x 798 x 219 ; 10.5kg Outdoor Unit: Model: Indoor unit catalog number : MXZ-3F68VF Energy efficiency: SEER/SCOP (W/W): 7.96/4.12 Energy Efficiency Class (cooling) : A++ Energy Efficiency Class (heating): A+ Performance: Nominal cooling capacity (kW): 6.8 Nominal heating capacity (kW): 8.6 Power absorbed in cooling (kW): 1.84 Absorbed power in heating (kW): 1.91 Min-max outdoor unit sound pressure (dB-A): 48/53 Nominal sound power dB(A): 63 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Guaranteed operating range: Cooling °C: -10 ~ +46 Heating °C: -15 ~ +24 Dimensions: HxWxD (mm) : 710 x 840 x 330; kg:58; General characteristics Multi-split DC Inverter The Inverter system is an electronic device that allows the speed of the compressor to be varied efficiently and, consequently, the power supplied by the air conditioner, based on the cooling or heating demand. Compared to traditional fixed speed (On/Off) air conditioners, inverter air conditioners reach the required temperature sooner and keep it stable, without annoying sudden changes, to the full advantage of comfort and electricity consumption. High seasonal efficiency Operating economy is the great advantage of Mitsubishi Electric air conditioners. Thanks to the DC Inverter regulation system and the careful design of the components used, energy efficiency reaches extraordinary levels. The entire range of multi-split air conditioners (MXZ-D) achieves high efficiency values ​​even on a seasonal basis. Maximum Silence for Maximum Comfort The DC Inverter multisplit units are characterized by the very low noise level emitted. By activating the silent mode, this level can be further reduced automatically when the demand is lower (e.g. during the night in cooling mode). Compactness and Versatility The dimensions of the outdoor unit are extremely compact so as not to occupy the space on the terrace or in the garden of the house. The wide development of the pipes allows a vast choice of installation site. New MXZ outdoor unit R32: reduced environmental impact Thanks to the use of R32 refrigerant and a reduced pre-charge of the units compared to the previous model, the MXZ-F units introduce a significantly lower quantity of equivalent tons of CO2 into the environment. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it. Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54,3F68,4F72) and A++ (sizes 2F42,2F53 ,3F54) in heating. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. Energy monitoring The new MXZ-F model supports the energy consumption monitoring function thanks to the MELCloud remote control system, even in Multisplit R32 configuration. MSZ-AP series R32 ecological refrigerant Compact design High seasonal energy efficiency for the whole range Optional silver ion air purifying filter Minimum sound level Weekly timer Multi-split compatible Wi-Fi compatible Innovation and compact design The MSZ-AP units are characterized by their ultra-compact dimensions with only 2 dimensional levels for 6 different powers. Energy efficiency Thanks to careful planning and the introduction of R-32 refrigerant gas, the efficiency of the new MSZ-AP units is significantly increased, reaching class A+++ in cooling (sizes 25 and 35) and A++ in heating on the whole line. R32: a refrigerant for the future The R32 refrigerant used in the MSZ-AP series air conditioners is characterized by a lower Global Warming Potential (GWP) than the refrigerant gases used up to now in residential air conditioning, reducing its potential negative impact on the environment. Its advantages are: High energy efficiency Reduction of the quantity of refrigerant gas used Reduced environmental impact Easily loaded and recoverable as pure gas Low toxicity and flammability Air distribution Thanks to the presence of the motorized louver, it is possible to direct the air flow to achieve maximum comfort in any operating mode. MELCloud - Energy consumption monitoring NEW (optional) The new MSZ-AP model supports the energy consumption monitoring function thanks to the Cloud MELCloud remote control system, also in the Multisplit R32 configuration. It allows you to precisely regulate the air conditioning systems from Smartphones and Tablets via a dedicated app. Silent operation Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. For sizes 25/35 the sound emission of the indoor unit is only 19dB when operating at minimum speed, guaranteeing maximum acoustic comfort inside the room. Night Mode By activating the Night Mode function from the remote control, it is possible to set the air conditioner for night-time operation: LED brightness removal Deactivation of "beep" sound 3dB noise emission reduction of the outdoor unit Advanced filtration Thanks to the air purifying filter in the internal unit, the new MSZ-AP model guarantees the removal of dust and bad odours. Furthermore, for sizes 25-50, it is possible to provide the optional silver ion air purifying filter, which captures bacteria, pollen and other allergens. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Air Conditioner General Fujitsu Trial Split Inverter KETA White 9+9+9 btu with AOHG18KBTA3 R-32 9000+9000+9000 Wi-Fi Optional - New Internal Units 1) Model Product Code: 3x ASHG09KETA Power 9000 btu Color White Cooling capacity: 2.5 kW Heating capacity: 2.8 kW Internal Unit Dimensions (HxWxD): 295 x 950 x 230 mm Internal Unit Weight: 11 Kg Wi-Fi Optional (Code UTY-TFSXW1 ) External Unit Catalog code : AOHG24KBTA3 Max indoor units: up to 3 indoor units Characteristics Cooling Capacity : 6.8 (1.8-8.5) Heating Capacity : 8.0 (2.0-9.2) SEER Cooling kWh/kWh 8.50 SCOP Warm-up 4.60 Cooling sound pressure: 48 dB(A) Heating sound pressure: 53 dB(A) Cooling Sound Power: 61 dB(A) Heating Sound Power: 67 dB(A) Compressor Type DC twin rotary Maximum pipe length Total / Single line m 50 / 25 Minimum pipe length Total / Single line 10 /2.5 Refrigerant gas: R-32 Dimensions and Weight: Dimensions (H × W × D) mm 716 x 820 x 315 External Unit Weight: 37 Kg Multisplit System GENERAL's Inverter Multisplit systems today represent a range of products that are at the top of their category for performance and energy efficiency , especially when they are called upon to operate as a heat pump, which is why they are also widely used as a primary heating system. The technology of Inverter Multisplit systems is now applied both in the residential sector and in the commercial and tertiary sector where variations in thermal load are continuous and sudden. Thanks to the technology of the new direct current Inverter compressors, the desired temperature in the room is reached more quickly than with conventional models and is maintained with a deviation of just 0.5°C. General KETA Beauty of Design The refined design of the KE series has been conceived for the most demanding European market; the particularity of how the panel is constructed creates three-dimensional light effects also due to its slightly curved surface; an elegant product ideal for any type of environment. Comfort in the environment and silence The larger deflector allows for a wide air flow, improving comfort and silence in the room. Smart remote management (optional) This model can be controlled remotely from any smart device via the free FGLair application, by easily installing the optional UTY-TFSXF2 interface on the indoor unit Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Seers: 5.60; Scop: 3.90; Energy class in cooling: A+; Energy class in cooling: A; Power: 9000+9000+18000 Btu; Surface Covered: from 15 to 25 m2 split 9000, from 50 to 60 m2 split 18000; Cooling performance: Capacity: 6.8kW; Absorbed power: 2.19 kW; Annual energy consumption: 425 kW; Function range guaranteed: -10~46°C; Heating performance: Capacity: 8.6kW; Absorbed power: 2.38 kW; Annual energy consumption: 2466 kW; Function range guaranteed: -15 ~ +24 °C; Noise level: Indoor Unit Sound Pressure (Min./max): 19/48 dB (A); Indoor Unit Sound Power: 57/58 dB(A); External Unit Sound Pressure: 50/53 dB (A); External Unit Sound Power: 64 dB(A); Technical data: Maximum Absorbed Current: 18.0 A; Refrigerant gas: R410A; Power supply: 230/50/1V/Hz/n°; Connections Liquid/Gas: 6.35"/9.52" inch; Maximum Length: 60m; Maximum height difference: 15 m; Composed of: Indoor Unit: 2x MSZ-AP25VG + MSZ-AP50VG; Outdoor Unit: MXZ-3E68VA; Dimensions: Indoor Unit 9000/18000(WxHxD): 798x299x285 mm; Weight: 10.5 Kg; Outdoor Unit (WxHxD): 840x710x330 mm; Weight: 57 Kg; General characteristics Mitsubishi always ready to launch products that look to innovation and improvement while always offering maximum comfort. The new Plus 2018 MSZ-AP line is designed with elegant and ultra-compact lines, ideal for any decor. Plus is a perfect mix of technology with low energy consumption, reaching very high levels of seasonal efficiency and class (A+++) in both cooling and heating. The distribution of comfort is optimized through a motorized louver sensor, which directs the air flow to every corner of the room. Finally, it turns out to be extremely silent (only 19 dB), reaching very low noise levels even when you sleep, guaranteeing maximum acoustic comfort inside the room. Functions: Plasma Quad Plus: is the function that effectively takes care of you by generating a magnetic field and through electrical discharges through which the air introduced into the environment passes, neutralizing viruses and bacteria, giving you only clean air; Dc Inverter: this is the function that allows you to manage your own comfort through functions and by regulating the temperature to your liking; Auto: Adjust the temperature automatically by recording the ambient temperature; MELCloud (Optional): is the function that allows complete management of your air conditioner through an App, which can be downloaded on your Smartphone or Tablet, to program or manage your comfort comfortably even when you are not at home, by activating the following functions: On / Off; Mode (Auto/Heat/Cool/Ventilation); Ventilation speed; Programmable weekly timer; Flaps inclination adjustment; Ambient temperature detection and setting; Weather information of the installation location; Night Mode: this is the function set up for night-time operation by reducing the LED brightness, deactivating the "beep" sound, reducing the sound emission of the external unit by 3dB; Advantages:

Read more less

Technical features: SEER: 5.6; SCOP: 3.9; Energy Class: A+; Energy Class: A; Coverage in m2 (min/max): from 25/40 m2 to split; Power (BTU): 12000+12000+12000; Cooling performance: Annual energy consumption: 425 kWh/a; Nominal Capacity: 6.8 kW; Absorbed power: 2.19 kW; Operating temperature range: -10 ~ +46 °C; Heating performance: Annual energy consumption: 2466 kWh/a; Rated Capacity: 8.6 kW; Absorbed power: 2.38 kW; Operating temperature range: -15 ~ +24 °C ; Absorption: 18.0A; Sound pressure Indoor unit (min/max): 21/46 dB-A Sound pressure Outdoor unit (min/max): 50/53 dB-A Indoor unit sound power: 58 dB-A; external sound power: 64 dB-A; Refrigerant gas: R410; Composed of: Indoor Unit: 3x MSZ-SF35VE3; Outdoor Unit: MXZ-3D68VA2 ; Dimensions: Indoor Unit (HxWxD): 299x798x195 mm; Weight: 10Kg; Outdoor Unit (HxWxD): 710x840x330 mm; Weight: 57Kg. General characteristics: The Mitsubishi SF model air conditioners are characterized by ultra-compact dimensions and a refined and modern design (family design), with only 2 dimensional levels for 6 different powers for the whole line. Thanks to the DC Inverter technology they have maximum silence and energy efficiency combined with useful functions and advanced devices for air filtration. All managed by a high technology that allows simple programming and maximum comfort. It also gives you the possibility of adding the Wi Fi card as an optional for the control and management of your air conditioner through your Smartphone or Tablet by downloading the Mel Cloud App downloadable on all platforms (IOS or Android). Functions: Weekly timer: it is the simple and intuitive function that allows you to have the desired comfort at the time you want, i.e. it is possible not only to program the switching on and off, but also a different temperature during the day; Nano-platinum filter: it is the innovative technology of the oxidizing filter of the platinum nano-particles which allows to neutralize bacteria, viruses, allergens and bad odours. Its irregular structure makes it more effective in capturing dust; Dual Air Guide: the two horizontal deflectors are composed of their own servomotor which allows, depending on the mode of use, the angle of each deflector can be adjusted individually to ensure maximum comfort.

Read more less

Technical features Indoor unit 1)Model: White Model Catalog Code: AS20S2SF1FA-MW Power: 7000 Btu/h x 2 Dimensions WxDxH 866x196x301 mm; 9.5 kgs Standard YR-HQ remote control Integrated Wi-Fi 2)Model: White Model Catalog Code: AS35S2SF1FA-MW Power: 12000 Btu/h Dimensions WxDxH 866x196x301 mm; 9.5 kgs Standard YR-HQ remote control Integrated Wi-Fi Outdoor unit Catalog code: 3U55S2SR2FA Max indoor units: 3 Energy efficiency                                                                                 Nom COOL output power (min~max) kW 5.2 (1.5~7.0) RISC output power nom (min~max) kW 6,5 (1,8~8,1) RAFF SEER energy class 8.5 (A+++) Energy class RISC SCOP 4.0 (A+) Performance Annual energy consumption RAFF kWh/a 210 Annual RISC energy consumption kWh/a 1522 Power supply V-Ph-Hz 230-1-50 Sound power dB(A) 65 Sound pressure dB(A) 52 Hydraulic data: R32 refrigerant Liquid/gas pipe Ø mm 3x6.35 / 3x9.52 Total pipe length max m 50 Single EU-UI line max piping length m 20 Max height difference IU - UE m 15 Max height difference IU - IU m 7.5 Function limits: - COOL. min~max °C -10÷46°C - HEAT. min~max °C -15÷24°C Dimensions Dimensions WxDxH mm 860x308x730 ; 51 kgs FLEXIS extension The new Haier FLEXIS internal unit is available in Matt White and Matt Black , i.e. matt white and matt anthracite grey. It supports R32 gas which at the moment represents the best in yields and reduced environmental impact on the greenhouse effect, it is easy to use thanks to a complete and intuitive remote control, and a refined and pleasant aesthetic which thanks to the opaque color is very modern and integrates well into the home environment. The performance is top notch from all points of view and the use of DC fans combined with design optimization can reduce noise up to 16d B(A ) , practically imperceptible to the human ear. Haier FLEXIS is equipped with a double motion sensor with an angle of 120° and a reading up to 8m. distance, which ensures a comfortable air flow by detecting the presence of people in the room according to your needs. In fact, the "follow" or "avoid" functions can be set. The air deflectors are also adjustable by remote control both for the classic movement on the horizontal axis and on the vertical ones to direct the flow to the right or to the left as desired. To the delight of the installer, Haier FLEXIS was designed with criteria that facilitate assembly by reducing installation times and simplifying the steps to be done for the hydraulic and electrical connections and was born in an inverter heat pump with high energy efficiency and with all the characteristics necessary to take advantage of the tax breaks provided for by the legislature for 2019. Eco Sensor Double motion sensor Double motion sensor capable of covering an area of ​​120° (2 direction area horizontally). Maximum detection distance 8m. Quietness The noise level of the indoor unit is 19 dB(A) The use of DC Inverter fans and design optimization decrease the noise level of the indoor units. With the Quiet setting the level of only 19dB(A) is reached. Easy installation 1. Easy installation of the mounting template Thanks to detailed instructions, the mounting template can be installed quickly and easily. 2. Easy clip Easier to install due to the additional support clip, which increases the working space. 3. Quick and easy repair of the PCB and motor Allows the removal and maintenance of the PCB and motor without the need to disassemble the unit and the evaporator. 4. More space for piping reduces installation time by increasing the operating space for easy access to piping and electrical connection area. 6. Removable bottom panel Allows the installer to connect pipes and cables with more operating space Wifi Allows you to set the air conditioner remotely even when you are away Easy installations Eco Sensor 16dB(A) Wi-Fi as standard Energy class in cooling: A+++ Energy class in heat pump: A++ Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Units 1) Model: Series: Windfree Light Model: 1 x AR07NXWXCWKNEU Power: 7000 btu Indoor Unit WxHxD (mm): 828x267x265 2) Model: Series: Windfree Light Model: 1 x AR09NXWXCWKNEU Power: 9000 btu Indoor Unit WxHxD (mm): 828x267x265 3) Model: Series: Windfree Light Model: 1 x AR12NXWXCWKNEU Power: 12000 btu Indoor Unit WxHxD (mm): 828x267x265 Outdoor Unit Model: Catalog code: AJ068MCJ3EH/EU Gases: R-410a Max indoor units that can be combined: 3 Nominal Capacity (Cooling/Heating) kW: 6.8/8.0 Max Outdoor Unit Sound Pressure (dB(A)): 48/49 Sound power (Max) dB(A): 64 Cooling/Heating operation range (°C): -5°~46°/-15°~24° Electrical data: Power (V/Hz/Φ) : 220~240/50/1 Dimensions: Outdoor Unit WxHxD (mm): 880x793x310 ; 56 kgs Liquid/Gas connection pipes Ømm (inch) 3x6.35 (1/4”) - 2x9.52 (3/8”) + 2x12.70 (1/2”) Pipe length (max per unit): 20 m Piping length (min per unit): 3 m Indoor-outdoor unit max height difference: 15 m Indoor-indoor unit max height difference: 7.5 m General characteristics Samsung Wind Free Light Samsung Windfree Light air conditioners are designed to make the most of it and give you maximum comfort with extremely low consumption, reaching very high levels of energy efficiency (A++). Designed with innovative and elegant lines, to satisfy any need, with a backlit LED display to view the temperature or the functions you want, it is also managed by a high-tech 8-pole inverter, which in addition to ensuring effectiveness and efficiency, allows for less vibration and noise, cooling environments more quickly and also reducing consumption. Designed to last over time and to withstand the most extreme temperatures, the outdoor units and its components are protected by a particular anti-corrosion and anti-mould protection, and its BLDC (double rotation) compressor, in turn made up of 2 cams and the two balancing weights, so as to obtain very low levels of vibrations, and be extremely silent. . Refreshes quickly without direct air jets The new WindFree air distribution system is the only one that transforms the powerful and direct air fl ow, often the cause of muscle pain and colds, into enveloping coolness. WindFree is ideal for maintaining the desired temperature while avoiding the classic drawbacks associated with the use of air conditioning. Goodbye annoying air jets only the pleasure of the climate you want 2 step cooling is the exclusive two-phase cooling system that allows Samsung air conditioners to obtain surprising results in a very short time and to maintain ideal climatic conditions in absolute comfort. Once the temperature has been selected, the air conditioner automatically sets maximum power to reach the goal in 25% less time than traditional air conditioners. Once the set temperature has been reached, the air conditioner autonomously reduces the emission of cold air, directing it upwards to avoid unpleasant chills for the people present in the room. What is the WindFree technique? The WindFree system, thanks to 21,000 micro-holes located on the front surface of the air conditioner, allows for a more uniform and delicate diffusion of fresh air without direct air jets. Triangle design Windfree function The WindFree system, thanks to 21,000 micro-holes in the air conditioning units, allows for a more uniform and delicate diffusion of fresh air without direct jets of air. Smart Wi-Fi Control Your well-being can be programmed even when you are not at home. By connecting the air conditioner via the integrated Wi-Fi module, it is possible to manage the air conditioner easily from your Smartphone or tablet, even when the heat suddenly breaks out and you are not at home, in fact by downloading the a special Samsung Smart Home App allows you to activate the air conditioning, to create the ideal climate to better enjoy moments of relaxation when you return home. Downloadable on all Android or IOS platforms. Main features Air conditioner that works with R32 gas , a new type of environmentally friendly refrigerant. The WindFree system , thanks to 21,000 micro-holes located on the front surface of the air conditioner, allows for a more uniform and delicate diffusion of fresh air without direct jets of air. The exclusive Smart Control technology allows you to manage the main functions of the air conditioner using an app that can be installed on a smartphone or PC, even when you are away from home. The noise level of just 16 db(A) is made possible by the use of advanced technologies and by an internal unit designed to minimize any type of vibration or noise. Digital Inverter and 8-Pole Compressor The Digital Inverter compressor modulates the power according to actual needs, significantly reducing energy waste compared to traditional compressors. The new and exclusive 8-Pole Inverter ensures more effective and effi cient operation with less vibration and noise, cooling environments more quickly and also reducing consumption. Purification The Easy Filter of Samsung air conditioners is located on the outside, on the top. So it's easier to take out, clean and put back without having to open any lid or pull hard to detach it. Spi Air Purifier Active hydrogen, together with oxygen ions, neutralizes bacteria that cause allergies and respiratory problems, guaranteeing always pure and healthy air. Design The triangular design allows for a larger impeller, a wider intake grille and a larger delivery surface. The room is cooled faster and more evenly. The elegant and luminous digital display , visible only when the air conditioner is on, reveals the temperature of the room in which the internal unit is installed. Comfort The air conditioner works at maximum power to quickly reach the desired temperature. Then direct the fins up to keep them as comfortable as possible. Auto Change Over automatically selects the operating mode (cooling or heating) required to maintain the set temperature. Just press the appropriate button and the special fins distribute the air flow evenly and quickly in the desired direction. The Good Sleep function regulates the room temperature by reproducing the body temperature curve during the night, thus ensuring a more comfortable rest. The dehumidification function allows you to eliminate humidity from the rooms, creating a pleasant atmosphere. The auto clean function , which starts automatically once the air conditioner is switched off, eliminates humidity in the internal unit, preventing the proliferation of mould, bacteria and bad odours. 2-Step Cooling The air conditioner works at maximum power to quickly reach the desired temperature. Then direct the fins up to keep them as comfortable as possible. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Midea Trial Split Inverter Air Conditioner PRIME 9+9+9 series with M3OF-21HFN8-Q R-32 9000+9000+9000 btu Model Product code 3x MA2-09NXD0 Power 9000 btu Dimensions WxDxH mm 805x205x285 mm OUTDOOR UNIT: Catalog number: M3OF-21HFN8-Q Gases : R-32 Minimum-max number of connectable indoor units: 3 Energy efficiency - Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 - Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Characteristics Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 Dimensions Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: - "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability - High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. - Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. - Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Prime The geometries used for the splits of the PRIME range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Internal fan rotation speed linear regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values ​​1-100%: Follow me function Prime series remote controls are equipped with a temperature sensor which the unit considers as "ambient" temperature. In fact, by setting the Follow me function, the appliance is able to "follow the real temperature perceived by the user, guaranteeing maximum comfort. Condensation control The units can work in cooling mode even with a low external temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Refrigerant leak alarm If the temperatures in the refrigerant circuit are irregular due to leaks, a specific fault code (EC) allows you to identify this condition. emergency function In the event of failure of one of the product's sensors, operation can continue in Emergency mode until the faulty part is replaced. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency of 2% higher than R410A Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. Super cool function The Super Cool function is a real hallmark of PRIME air conditioners: activated by simply pressing a button, this particular mode maximizes the rotation speed of the internal fan, thus increasing the flow of cold air and allowing the appliance to reduce the temperature to 17°C as quickly as possible Gear function The Prime units are equipped with the GEAR function which offers the user the possibility of independently managing the power supplied by the unit, choosing one of the 3 different levels: 50%, 75% and 100%. In this way you can disregard the classic settings by concentrating solely on the "gear" in which you want the unit to operate: first, second or third. ECO function The Midea Prime series units are equipped with a special iECO mode which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners "Do Not Disturb" mode By pressing a button on the remote control, Prime can enter DO NOT DISTURB mode, thus silencing all acoustic warnings, turning off the indoor unit display and optimizing the silence of the indoor fan. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor Units 1) Model: Series: AMBER Indoor unit model : 2 x GWH09YC Power: 9000 btu Dimensions WxHxD 301x996x225 mm; 11 Kgs 2) Model: Series: AMBER Indoor unit model : 1 x GWH12YC Power: 12000 btu Dimensions WxHxD 301x996x225 mm; 11 Kgs Outdoor Unit Model: Catalog code : GWHD(24)NK6LO Gases : R-32 Minimum-max number of connectable indoor units: 3 Energy efficiency: Nominal cold cooling capacity 7.1 kW Nominal hot cooling capacity 8.5 kW SEER 6.1 SCOP 4.0 Cooling energy class A++ Heating energy class A+ Annual energy consumption cooling kW/a 407 Annual heating energy consumption kW/a 2135 Performance: Outdoor unit air flow: m3/h 4000 Max sound pressure level outdoor unit dB(A) 58 Outdoor unit sound power level (dB(A)) : 68 Electrical data: Feeding : 230/1/50 Pipes Liquid/Gas 6.35 9.52 (1/4" - 3/8") mm Dimensions HxWxD 790x980x427 mm General characteristics GREE Argoclima SpA and Gree Electric Appliances sign an agreement for the exclusive distribution of Gree products on the Italian market Milan, 16 February 2015 – After years of industrial collaboration, Argoclima SpA takes the opportunity to distribute the products of Gree, world leader in the air conditioning sector, throughout the country. The known and undoubted quality of Gree products, the complementarity of the range with respect to the original products developed and manufactured by Argoclima in Italy and the multi-brand vocation of Argoclima itself, combine well in this important distribution agreement which offers Gree a solid presence in Italy , a sales, marketing, logistics and technical assistance organization, worthy of Gree's expectation to fully support and satisfy Italian customers in all segments, from simple mono-split systems to VRF systems. Thanks to the partnership, the Argoclima sales network will have the opportunity to further expand its product portfolio with new air conditioning solutions aimed at both the residential and commercial markets, which Argoclima will distribute exclusively throughout the country. Technologically advanced products, made with high quality materials, both from the point of view of performance and consumption containment and attention to the concept of eco-sustainability. Amber R-32 series ADVANTAGES R32 - ENVIRONMENT FRIENDLY 0 IMPACT ON THE OZONE LAYER > ENERGY EFFICIENCY -30% REFRIGERANT CHARGE -70% IMPACT ON GLOBAL WARMING (GWP = 675 VS 2088 OF R410A) GREATER EASE OF USE CHARACTERISTICS Air conditioning Elegant design and attention to detail Pure white "high gloss" finish Very discreet backlit display DC Inverter technology R32 ecological gas High energy efficiency class Cold plasma air purification system: guarantees effective sterilization of the air by reducing 90% of bacteria, removes odours, improves air quality by increasing the presence of negative ions. Remote WIFI control Digital remote control with LCD screen Ifeel: ensures the desired temperature in the precise place where the remote control is located 7 ventilation speeds 4-way air delivery : automatic oscillation of the flap both vertically and horizontally in order to maximize comfort Various airflow adjustments Programmable timer "Turbo" function in cold and hot “Quiet” function Intelligent defrosting: the defrosting process is not activated unless necessary, allowing significant energy savings Cold draft prevention: Prevention of cold air intake during the heating function "Sleep" mode Smart auto-restart X-fan: self-cleaning of the indoor unit coil Low voltage startup: very low consumption in the starting phase, thus avoiding problems of interference with other electrical appliances Self-diagnosis Optimized airflow in cold and hot Energy saving function STANDARD WI-FI By connecting via the home Internet connection to the "Gree Cloud Platform" it is possible to control the air conditioner even when you are not at home; just connect to the “Gree Cloud Platform” from the Gree Smart application”. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Trial Split Inverter Air Conditioner Hitachi Dodai 7000+9000+9000 series with RAM-53NE3F R-32 Wi-Fi Optional - NEW 7+9+9 INDOOR UNITS 1) Model Product code: 1 x RAK-18REF Power: 7000 btu Dimensions HxWxD mm 280 x 780 x 215 2) Model Product code: 2 x RAK-25REF Power: 9000 btu Dimensions HxWxD mm 280 x 780 x 215 Energy efficiency (SCOP) 4.1 SEER 8.1 Warm energy class A ++ Cold energy class A +++ Performance Nominal thermal power 6.3 kWatt Nominal cooling capacity 5.3 kWatt Noise 61dB(A) Number of possible connections from 2 to 3 230 Volt power supply Type of rotary compressor Dimensions EU size 850x750x298mm Dodai Compatible with the Humo Wi-Fi system Thanks to the Hi-Kumo APP you can turn on, turn off, change the temperature or make programming anywhere in the world you are. The system can be controlled via a smartphone with internet connection to the Wi-Fi device (optional). Making the best use of space Thanks to the width of only 780 mm you can also install it above a door. Silent operation the Dodai series has a sound level that reaches 20dB(A) depending on the model. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor units: Model: Indoor unit catalog number : 3 x MSZ-LN35VGB Power (BTU/h) 12000 Indoor Unit HxWxD (mm): 307 x 890 x 233 ; 15.5kg Outdoor Unit: Model: Indoor unit catalog number : MXZ-3E68VA Max number of connectable indoor units: 3 Energy efficiency: SEER/SCOP (W/W): 5.6/3.9 Energy Efficiency Class (cooling) : A+ Energy Efficiency Class (heating): A Annual energy consumption1 kWh/a cooling: 425 Annual energy consumption1 kWh/per heating: 2466 Performance: Nominal cooling capacity (kW): 6.8 Nominal heating capacity (kW): 8.6 Power absorbed in cooling (W): 1840 Power absorbed in heating (W): 2350 Min-max outdoor unit sound pressure (dB-A): 50/53 Nominal sound power dB(A): 64 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R410A Guaranteed operating range: - Cooling °C: -10 ~ +46 - Heating °C: -15 ~ +24 Dimensions: HxWxD (mm) : 710 x 840 (+30) x 330 (+66) ; 57kg General characteristics Multi-split DC Inverter The Inverter system is an electronic device that allows the speed of the compressor to be varied efficiently and, consequently, the power supplied by the air conditioner, based on the cooling or heating demand. Compared to traditional fixed speed (On/Off) air conditioners, inverter air conditioners reach the required temperature sooner and keep it stable, without annoying sudden changes, to the full advantage of comfort and electricity consumption. High seasonal efficiency Operating economy is the great advantage of Mitsubishi Electric air conditioners. Thanks to the DC Inverter regulation system and the careful design of the components used, energy efficiency reaches extraordinary levels. The entire range of multi-split air conditioners (MXZ-D) achieves high efficiency values ​​even on a seasonal basis. Maximum Silence for Maximum Comfort The DC Inverter multisplit units are characterized by the very low noise level emitted. By activating the silent mode, this level can be further reduced automatically when the demand is lower (e.g. during the night in cooling mode). Compactness and Versatility The dimensions of the outdoor unit are extremely compact so as not to occupy the space on the terrace or in the garden of the house. The wide development of the pipes allows a vast choice of installation site. General characteristics MSZ-LN Series Kirigamine Style For your luxury Elegant design Handcrafted paint technology creates a refined design, giving the finish rich color and a high-quality feel. The new wall-mounted indoor units of the MSZ-LN series combine elegant and refined design with unparalleled performance. The new benchmark for air quality and distribution, for silence and efficiency has arrived! Personal comfort The i-see sensor 3D infrared sensor uses advanced technologies to offer personalized comfort by monitoring the temperature of the room. Air distribution The totally revolutionary geometry of the double deflector guarantees optimal air distribution; it is possible to independently direct the outgoing air flows from the right and left side of the unit. The double flaps work independently, distributing pleasant air flows to people in the room. 3D i-see sensor The 3D i-see sensor presence sensor, integrated in the MSZ-LN units, has new functions compared to the one installed in the Kirigamine MSZ-FH series for an increase in indoor comfort. Thanks to the new implementations, not only is it possible to direct the flow directly/indirectly, but functions are available that "learn" the habits of the occupants and optimize the efficient and comfortable operation of the unit. The even airflow function, for example, "records" the occupancy profile of the room, creating a mapping that allows the most frequented areas to be optimally air-conditioned based on history. Silent operation Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The Kirigamine line allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear. The 19dB(A)2 achieved by the Kirigamine Style model is quieter than the noise generated by leaves rustling in the wind, making the air conditioner effectively inaudible to the occupants of the room. This is why Kirigamine Style is particularly suitable for domestic environments such as bedrooms and living areas, where we spend most of our time and carry out our daily activities. Healthy environment Mitsubishi Electric's exclusive coating prevents the accumulation of dust and grease. Advanced filtration The MSZ-LN units' Quad Plus Plasma filtration system achieves a new record in the level of air cleanliness. It is in fact capable of retaining particles up to PM2.5, i.e. with a diameter of less than 2.5 μm. This distinctive feature makes the unit ideal for households particularly attentive to air quality or for installation in rooms with often compromised ambient air (e.g. rooms overlooking busy areas, in cities near production activities...) . Quad Plus Plasma This distinctive feature makes the unit ideal for households particularly attentive to air quality or for installation in environments with often compromised ambient air (e.g. rooms overlooking trafficked areas, in cities, near production activities...). Through the use of Plasma Quad Plus technology, the unit is able to eliminate bacteria and viruses thanks to a technology that exploits an electric field and a series of electric discharges through which the air introduced into the room passes. With Plasma Quad Plus technology, 99% of the bacteria present in a 25m3 room is neutralized in just 115 minutes. Dual Barrier Coating With the MSZ-LN unit, Mitsubishi Electric introduces another revolutionary technology: Double Barrier Coating. During operation, the dust and impurities introduced during the air conditioning operations are deposited on the internal components, especially the battery and fan, increasing the machine's consumption by up to 18%. With Double Barrier Coating the internal components of MSZ-LN are treated with a second protective layer which prevents the deposit of dust and impurities even after long periods of time, reducing consumption and eliminating the need for unit maintenance in relation to this problem. MELCloud - Energy consumption monitoring The ability to manage and monitor the air conditioning system remotely is a consolidated solution in the Mitsubishi Electric product range thanks to the MELCloud platform. It allows you to promptly adjust the air conditioning systems from Smartphones and Tablets via a dedicated app. The new MSZ-LN units are not only compatible with MELCloud, but are already designed incorporating the WiFi interface for connection to the network, which makes them ready for the Cloud solution without the need for additional components. One of the new features that MSZ-LN is already equipped with is the ability to monitor electricity consumption via the MELCloud® application, to always have efficiency under control. Functions and benefits of WIFI control On / Off Mode (Auto/Heat/Cool/Fan) Ventilation speed Programmable weekly timer Flaps angle adjustment Room temperature detection and setting Weather information of the installation site Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Units 1) Model Indoor Unit Catalog Code : 1x MSEPBU-09HRFN8 EAN: 8052705161830 Power : 9000 Btu Cooling Capacity: 2.60 kW Heating Capacity: : 2.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi 2) Model Indoor Unit Catalog Code : 2x MSEPBU-12HRFN8 EAN: 8052705161854E12 Power : 12000 Btu Cooling Capacity: 3.50 kW Heating Capacity: : 3.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi Outdoor Unit Outdoor Unit Catalog Code: M3OF-27HFN8-Q EAN : 8052705160116 Connectable Indoor Units : 3 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 453 kWh/a Annual energy consumption in Heating : 1993 kWh/a Performance: Cooling Capacity: 7.91 kW Heating Capacity: 8.21 kW Std Cooling Absorption : 2450 W Heating Std Absorption: 2200 W Sound power level : 67 dB(A) Sound pressure level : 54 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Maximum piping length: 30 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 845x363x702 mm Weight of Outdoor Unit: 51.1 Kg Midea All Easy Pro Installing the indoor units is quick and easy, thanks to the graduated installation plate with integrated spirit level and support bracket. The functional components can be disassembled in less than 1 minute. All Easy Pro is equipped with the Eco Eye function which allows you to check the presence of people in the rooms, activating an energy-saving work cycle when they are not occupied, to contain energy consumption. When using the product in dehumidification mode, it is possible to set a desired relative humidity value for the environment, so as not to dry the air excessively Simplified installation and maintenance A series of functions that allow you to install the product in less time. All functional parts of the unit can be removed with a few simple operations to facilitate cleaning and maintenance of the product Intelligent eye By pressing a button on the remote control, a sensor checks for the presence of people in the room and, if no movement is detected in the room, a low energy consumption work cycle is activated Smart drying In dehumidification mode, it is possible to set the desired level of relative humidity in the room, in order to avoid excessive drying of the air Quick installation and easy maintenance With Alle Easy Pro everything is easy, just 1 screw and 1 minute. Save 80% maintenance time compared to standard indoor units Fast installation With All Easy Pro, 6' 47 is enough Traditional system 11' 33" Fan disassembly With All Easy Pro 1' 12" is enough Traditional system 17' 37" PCB replacement 1' 3" is enough for assembly 1' 12" is enough for disassembly Positioning and fixing of the plate without measuring tools Quick installation with super thin plate with integrated scale and spirit level 1. Mark guide point A following the instructions on the plate 2. Move the plate down until it meets the reference hole 3. Align the plate with the built-in level and mark the hole on the other side Wiring in just 3 seconds The pipe fixing clip folds to keep the product raised during the connection of the pipes, offering ample space to facilitate all the tightening operations of the fittings Freedom of installation Maximum height difference of the pipes: 25 m Maximum piping length: 50 m A minimum distance from the ceiling of only 5 cm is required Cleaning and hygiene Cleaning the internal fan is easy, thanks to the innovative design that allows disassembly in 1 minute with just 1 screw. So you can save time and money to dedicate yourself to what you love A flexible solution Thanks to the extreme flexibility of All Easy Pro, you can install it at a minimum distance of only 5 cm from the ceiling, allowing for optimal cooling of the room Simplified filter cleaning All Easy Pro is hygienic and practical: 6 magnetic connectors hold the upper filter in position to allow it to be removed and cleaned whenever desired Intelligent Eye Eco Master Intelligent Eye function automatically activates energy saving mode when it detects an empty room, thus reducing energy costs by up to 25% Smart Kit App with voice control With All Easy Pro technology, you can control the air conditioner with your voice or with the Midea Air app Control your climate with your voice The air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units of the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor units: 1) Model: Indoor unit catalog number : 1 x MSZ-LN25VGB Power (BTU/h) 9000 Indoor Unit HxWxD (mm): 307 x 890 x 233 ; 15.5kg 2) Model: Indoor unit catalog number : 2 x MSZ-LN35VGB Power (BTU/h) 12000 Indoor Unit HxWxD (mm): 307 x 890 x 233 ; 15.5kg Outdoor Unit Model: Indoor unit catalog number : MXZ-3E68VA Max number of connectable indoor units: 3 Energy efficiency: SEER/SCOP (W/W): 5.6/3.9 Energy Efficiency Class (cooling) : A+ Energy Efficiency Class (heating): A Annual energy consumption1 kWh/a cooling: 425 Annual energy consumption1 kWh/per heating: 2466 Performance: Nominal cooling capacity (kW): 6.8 Nominal heating capacity (kW): 8.6 Power absorbed in cooling (W): 1980 Power absorbed in heating (W): 2360 Min-max outdoor unit sound pressure (dB-A): 50/53 Nominal sound power dB(A): 64 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R410A Guaranteed operating range: - Cooling °C: -10 ~ +46 - Heating °C: -15 ~ +24 Dimensions: HxWxD (mm) : 710 x 840 (+30) x 330 (+66) ; 57kg General characteristics Multi-split DC Inverter The Inverter system is an electronic device that allows the speed of the compressor to be varied efficiently and, consequently, the power supplied by the air conditioner, based on the cooling or heating demand. Compared to traditional fixed speed (On/Off) air conditioners, inverter air conditioners reach the required temperature sooner and keep it stable, without annoying sudden changes, to the full advantage of comfort and electricity consumption. High seasonal efficiency Operating economy is the great advantage of Mitsubishi Electric air conditioners. Thanks to the DC Inverter regulation system and the accurate design of the components used, energy efficiency reaches extraordinary levels. The entire range of multi-split air conditioners (MXZ-D) achieves high efficiency values ​​even on a seasonal basis. Maximum Silence for Maximum Comfort The DC Inverter multisplit units are characterized by the very low noise level emitted. By activating the silent mode, this level can be further reduced automatically when the demand is lower (e.g. during the night in cooling mode). Compactness and Versatility The dimensions of the outdoor unit are extremely compact so as not to occupy the space on the terrace or in the garden of the house. The wide development of the pipes allows a vast choice of installation site. MSZ-LN Series Kirigamine Style For your luxury Elegant design Handcrafted paint technology creates a refined design, giving the finish rich color and a high-quality feel. The new wall-mounted indoor units of the MSZ-LN series combine elegant and refined design with unparalleled performance. The new benchmark for air quality and distribution, for silence and efficiency has arrived! Personal comfort The i-see sensor 3D infrared sensor uses advanced technologies to offer personalized comfort by monitoring the temperature of the room. Air distribution The totally revolutionary geometry of the double deflector guarantees optimal air distribution; it is possible to independently direct the outgoing air flows from the right and left side of the unit. The double flaps work independently, distributing pleasant air flows to people in the room. 3D i-see sensor The 3D i-see sensor presence sensor, integrated in the MSZ-LN units, has new functions compared to the one installed in the Kirigamine MSZ-FH series for an increase in indoor comfort. Thanks to the new implementations, not only is it possible to direct the flow directly/indirectly, but functions are available that "learn" the habits of the occupants and optimize the efficient and comfortable operation of the unit. The even airflow function, for example, "records" the occupancy profile of the room, creating a mapping that allows the most frequented areas to be optimally air-conditioned based on history. Silent operation Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The Kirigamine line allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear. The 19dB(A)2 achieved by the Kirigamine Style model is quieter than the noise generated by rustling leaves in the wind, making the air conditioner effectively inaudible to the occupants of the room. This is why Kirigamine Style is particularly suitable for domestic environments such as bedrooms and living areas, where we spend most of our time and carry out our daily activities. Healthy environment Mitsubishi Electric's exclusive coating prevents the accumulation of dust and grease. Advanced filtration The MSZ-LN units' Quad Plus Plasma filtration system achieves a new record in the level of air cleanliness. It is in fact capable of retaining particles up to PM2.5, i.e. with a diameter of less than 2.5 μm. This distinctive feature makes the unit ideal for households particularly attentive to air quality or for installation in rooms with often compromised ambient air (e.g. rooms overlooking busy areas, in cities near production activities...) . Quad Plus Plasma This distinctive feature makes the unit ideal for households particularly attentive to air quality or for installation in environments with often compromised ambient air (e.g. rooms overlooking trafficked areas, in cities, near production activities...). Through the use of Plasma Quad Plus technology, the unit is able to eliminate bacteria and viruses thanks to a technology that exploits an electric field and a series of electric discharges through which the air introduced into the room passes. With Plasma Quad Plus technology, 99% of the bacteria present in a 25m3 room is neutralized in just 115 minutes. Dual Barrier Coating With the MSZ-LN unit, Mitsubishi Electric introduces another revolutionary technology: Double Barrier Coating. During operation, the dust and impurities introduced during the air conditioning operations are deposited on the internal components, especially the battery and fan, increasing the machine's consumption by up to 18%. With Double Barrier Coating the internal components of MSZ-LN are treated with a second protective layer which prevents the deposit of dust and impurities even after long periods of time, reducing consumption and eliminating the need for unit maintenance in relation to this problem. MELCloud - Energy consumption monitoring The ability to manage and monitor the air conditioning system remotely is a consolidated solution in the Mitsubishi Electric product range thanks to the MELCloud platform. It allows you to promptly adjust the air conditioning systems from Smartphones and Tablets via a dedicated app. The new MSZ-LN units are not only compatible with MELCloud, but are already designed incorporating the WiFi interface for connection to the network, which makes them ready for the Cloud solution without the need for additional components. One of the new features that MSZ-LN is already equipped with is the ability to monitor electricity consumption via the MELCloud® application, to always have efficiency under control. Functions and benefits of WIFI control On / Off Mode (Auto/Heat/Cool/Fan) Ventilation speed Programmable weekly timer Flaps angle adjustment Room temperature detection and setting Weather information of the installation location Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less