SAVIO Inoxdens Moon 25 SA Condensing Boiler Complete With Low NOx Methane Fume Exhaust Kit - NEW Technical data Heating/DHW nominal heat input kW 21.0 / 26.0 Heating/DHW minimum heat input kW 3.0 / 3.0 Heating/DHW maximum useful power 60°/80°C *kW 20.7 / 25.6 Heating/DHW minimum useful power 60°/80°C * kW 2.8 / 2.8 Heating/DHW maximum useful power 30°/50°C ** kW 22.8 / 28.2 Heating/DHW minimum useful power 30°/50°C ** kW 3.2 / 3.2 Quantity of condensate at Q.nom. 30°/50°C (in heating) ** l/h 4.2 Amount of condensate at Q.min. 30°/50°C (in heating) ** l/h 0.5 Yield name 60°/80°C *% 98.4 NOx class 6 Minimum/maximum heating temperature **** °C 25 / 80 Minimum/maximum heating pressure bar 0.3 / 3 Expansion tank capacity (total/useful) l 7 Maximum flow rate (ΔT=25 K) / (ΔT=35 K) l/min 15.4 / 10.7 Voltage/Power at nominal heat input V~/ W 230 / 100 Degree of protection IPX5D Height x Width x Depth mm 700 x 400 x 300 Inoxdens Moon The InoxDens Moon condensing boiler , unlike traditional boilers, allows you to recover energy by condensing the water vapor contained in the exhaust fumes; that is, for the same amount of heat produced, it consumes less gas and furthermore the exhaust fumes contain fewer substances which are harmful to the environment. The materials that compose it and the regulation systems with which it is equipped offer safety, high comfort and energy savings, so as to be able to fully appreciate the advantages of independent heating. InoxDens Moon is the new SAVIO model of wall-mounted condensing boiler . It offers excellent performance and high yields that last over time, thanks to the innovative heat exchanger . Simple to use thanks to the digital control panel, with a display designed to communicate with the user easily and comfortably. Comfort is at your fingertips Thanks to the Savio Connect App it is possible to manage the boiler remotely. To use it, you need the optional Savio Connect KIT in addition to the advanced remote control. The advanced control (class V) makes it possible to modulate the system water delivery temperature according to the room temperature and the outside temperature. What are the benefits? Reduction of consumption, energy saving and extreme flexibility: the regulation is flexible according to your needs and daily habits. The domestic hot water temperature can also be adjusted with a click Awareness of your system: you can always monitor the correct functioning of the heat generator in real time Safety: Possible anomalies can be seen in real time, together with the relative error code. In this way it will be possible to intervene immediately and when possible even remotely "SAVIO Connect" kit It is a WiFi "connection device" which, operating in the home WLAN network, allows control of room thermoregulation and boiler operation, both locally and remotely, using our dedicated APP. Technical features Boiler with single circuit primary exchanger in stainless steel, without joints and/or welds, which maintains high efficiency even on older systems New combustion system with patented gas-adaptive technology (Advanced Adaptive Gas Combustion Control – A²GC²) The electronics continuously analyze the combustion (CO2) through the flame signal and intervene by acting on the gas valve and fan, to allow correct combustion in all terms of use. The electronics allow the boiler to be easily adapted to the various types of gas without having to intervene with a mechanical transformation kit Instant production of domestic hot water with dedicated plate exchanger Domestic hot water pre-heating function: faster delivery of domestic hot water User interface with display and multifunction keys for adjusting and setting the parameters Easy to inspect standard by-pass Chimney Protection System: electronic management of fume overheating, guaranteeing maximum protection of the chimney Ducting on flues: particularly suitable for operation in flues that require ducting with high pressure drops Minimum polluting emissions (class VI - EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection (methane configuration) Removable casing in three pieces for easier maintenance or inspection For SV versions: possibility of setting the maximum power that can be supplied to the external boiler Gas-adaptive technology Less consumption, more efficiency, fewer emissions The innovative Adaptive Gas technology, which all models in the InoxDens line are equipped with, allows the boilers to be adapted in complete autonomy to the different types and qualities of gas. The electrode, in addition to detecting the flame, also detects the characteristics of the gas and automatically adapts the combustion parameters to maintain the maximum level of efficiency, with a consequent reduction in consumption and emissions compared to traditional control systems. The Adaptive gas system makes the boiler ready to operate with any type of gas without transformations. Automatic gas regulation Adaptation to changing gas quality Clean combustion The only model suitable for methane and LPG which allows you to optimize the warehouse In traditional boilers, the combustion values ​​are detected and adjusted only during maintenance, furthermore the composition of the gas network is not always constant and can create operating inefficiencies on boilers without combustion control devices, compromising reliability, savings and the quality of emissions. Thanks to the Gas-Adaptive system, the new condensing boilers electronically control combustion by managing the gas and air supply at best and at all times, automatically adapting the CO2. A "Plastic-FREE" production For a more sustainable environment A fundamental element that guided the entire design phase of the new InoxDens Moon boiler is the strong focus on the circular economy. For this we have used components with a higher rate of recyclability, eliminating the use of plastic as much as possible. The plastic group, for example, has been replaced with the brass group, a completely recyclable material. The protective shells of the boiler were made of cardboard and no longer of polystyrene. Furthermore, the front is no longer in plastic but in pressed steel. High circulation single coil primary heat exchanger Savio introduces the Round heat exchanger in 2017. Demonstrated the great reliability it adopts in the InoxDens Moon range. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open Chamber Boiler Beretta CIAO LX 24 CAI Low NOx LPG 20151437 - NEW Technical features Model: CIAO LX 24 CAI gpl Code: 20151437 Heating/DHW nominal heat input: 26.70 kW Heating/DHW nominal thermal power: 24.06 kW Efficiency at nominal power: 90.1 Efficiency at reduced load (30%): 89.2% NOx class 6 Maximum working pressure heating bar 3 Maximum absorbed electrical power W 47 Quantity of hot water deltaT 25C° 13.8 l/min Dimensions HxWxD 740x400x340 HELLO LX Beretta has renewed the Ciao open flue boiler; the previous model Ciao S CAI now becomes Ciao LX CAI and is placed in Class NOX 6 . Aesthetically it looks like the previous one but its technology is now completely different. The Ciao LX CAI is the entry-level model for approaching Beretta boiler technology; the CAI model has an open chamber and natural draft. The adjectives that identify it are: high quality standard, sturdiness, reliability and economy in purchasing and running. The innovative Double Exchanger is very compact and is of the plate type with the possibility of preheating . It also uses a low consumption Synchronous Circulator (EEI=0.20) with anti-block cycle system and 3-way valve; it is equipped with a smoke control thermostat and by-pass on the heating circuit. Beretta Ciao has a simple, modern and elegant line; the front panel, the real brain of the boiler, is equipped with many functions. Ciao LX CAI is designed to be installed outdoors in partially protected places, thanks to the dedicated accessories and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit together with the siphon antifreeze heater kit (optional to be requested separately from the Beretta Technical Assistance Centre). A convenient liquid crystal digital display for viewing the temperature and diagnostic codes, the on/off/summer/winter/reset/heating temperature/ Amico Climate System selector, the domestic hot water temperature selector/pre-heating activation, the Hydrometer. The wall water fittings, the sanitary taps and the gas tap are not included in the package. GUARANTEED SAVINGS AND HIGH COMFORT Gas consumption is always very low . This new version complies with the new standards on combustion gas emissions (NOx 6) e the ErP Directive 2015 ; the boiler benefits from Energy Classes C in Heating and B in Sanitary . It all starts with savings, starting from the purchase price up to consumption management. Maximum comfort with minimum cost. TECHNICAL FEATURES Class B/C NOx class 6 - ErP version, equipped with 6 m low consumption circulator Double exchanger: primary and sanitary plate with the possibility of preheating 8 liter expansion vessel Arrangement for climatic thermoregulation (optional external probe to be purchased through CAT) IPX5D electrical protection degree Optional plumbing fittings, gas and sanitary taps 3-way valve with anti-block cycle system Smoke control thermostat By-pass on the heating circuit Electronic board with self-diagnostic function and antifreeze protection Simple and intuitive digital display Selector on/off/summer/winter/reset/heating temperature/activation of the Clima Amico system Domestic hot water temperature selector/pre-heating activation Hydrometer Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Open Chamber boiler mod. START 24 KI Low NOx - NEW ErP CODE 20151434 Product code: 20151434 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.7 kW Heating/DHW nominal heat output: 24 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°): 90.1-86.4% Profit return 30% (47th return): 89.2% Open chamber with natural draft NOx class: 6 Min/max heating operating pressure: 0.25-3 bar Max absorbed electric power: 47 W Expansion vessel: 8 litres Min/max pressure in DHW: 0.15-8 bar Quantity of hot water with Δt 25°C: 13.8 l/min Quantity of hot water at Δt 30°C: 11.5 l/min Quantity of hot water at Δt 35°C: 9.9 l/min Sanitary water temperature selection range: 37-60°C Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs Electrical protection degree: IP X5D Power supply: METHANE Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER Immergas Victrix Zeus 25 kW Low NOx Condensing Boiler with 45 lt boiler complete with Flue Exhaust Kit cod. 3.028381 Technical features Boiler code 3.028381 Maximum nominal heat input in DHW kW (kcal/h) 25.8 (22,211) Maximum nominal heat input in heating kW (kcal/h) 20.5 (17,663) Minimum nominal heat input kW (kcal/h) 3.6 (3,135) Maximum useful thermal power in domestic hot water kW (kcal/h) 25.0 (21,500) Maximum useful heat output in heating kW (kcal/h) 20.0 (17,200) Minimum useful heat output kW (kcal/h) 3.5 (3,010) Useful thermal efficiency at 100% Pn (80/60 °C) % 97.5 Useful thermal efficiency at 30% of the nominal load. (80/60°C) % 100.2 Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 11.9 Specific flow rate ∆t 30 °C (in the first 10 minutes) of domestic hot water l/min 14.6 Nominal heating expansion vessel capacity (total) liters 8.0 (5.8) IPX 5D electrical protection degree NOx class Victrix Zeus 25 VICTRIX ZEUS 25 is the condensing and total premix boiler with stainless steel boiler, compact dimensions and new design, completely renewed . With 25 kW of power, it is designed for new installations, but the identical hydraulic connections compared to the previous models and the standard connection group, favor installers in replacements. In addition, the condensing module with large section stainless steel coil reduces the risk of clogging and the low-consumption circulator allows for considerable savings in electricity. Thanks to the electronic card that modulates the boiler power up to 17%, high yields are obtained with a consequent reduction in gas consumption. VICTRIX ZEUS 25, which can also be installed outdoors in protected places such as under the balcony, can be fed with any type of fuel (methane/LPG or propane air), which is why it is supplied with a single product code. In addition to allowing the fumes to be discharged from the wall in the cases envisaged by Legislative Decree 102 of 4 July 2014, the VICTRIX ZEUS 25 falls within the most ecological class of the European classification (class 6) due to the low emissions of carbon monoxide (CO) and nitrogen (NOx). To make it easier for users to use, the interface with LCD display and knobs offers quick and easy adjustments and settings. VICTRIX ZEUS 25 can be remote controlled by the new DOMINUS app. The app is simple and intuitive, and allows you to control the boiler or view its operation with a tablet, smartphone or laptop. Using the optional Wi-Fi transmitter kit (code 3.026273), to be interposed with a wireless modem/router (not supplied by Immergas), it is possible to communicate from anywhere with the boiler electronic board. 45 LITERS STAINLESS STEEL BOILER The stainless steel guarantees the inalterability of the boiler to the action of the water and the wide flange optimizes cleaning and maintenance operations. Inside the boiler there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. MULTIPLE WITHDRAWALS OF DOMESTIC HOT WATER The capacity of the stainless steel boiler, combined with the excellent temperature regulation, have made it possible to obtain the *** marking pursuant to EN 13203-1, i.e. maximum sanitary performance, guaranteeing high comfort even with simultaneous water withdrawals domestic hot water. SANITARY EXPANSION VESSEL SERIES APPROVED FOR OUTDOORS Thanks to the new insulation that equips the stainless steel boiler and the standard protection down to -5 °C, the boiler can be installed outdoors in a partially protected place. With an appropriate optional kit it is possible to extend it down to -15 °C (in the presence of electricity and gas). The degree of electrical insulation is IPX5D. PRIMARY EXCHANGER IN STAINLESS STEEL The primary exchanger that equips VICTRIX ZEUS 25 is made with a single-tube exchange coil in stainless steel. The absence of collectors and circuits in parallel guarantees maximum reliability over time: there are no weldings. The single stainless steel spiral without bottlenecks allows for a perfectly balanced hydraulic circuit, considerably reducing pressure drops. The internal section, wide and constant, allows to limit deposits, reducing the risk of clogging in the case of impurities present in the water (for example in the case of replacing boilers on outdated systems). Due to this peculiarity, VICTRIX ZEUS 25 is ideal for replacement . Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

NB: THE CURVE AND THE PIPE FOR THE COAXIAL KIT MUST BE PURCHASED SEPARATELY Momiji 24 kW Rinnai Condensing Boiler Complete with FUme Exhaust Kit with Integrated Wi-Fi Chronothermostat Code REB-KAI2024FF Heating energy class A XL load profile Nominal thermal power kW 20 EN677 efficiency on PCI (80-60°C) % 96.1 Nominal power modulation (80-60°C) Heating kW 6.7 - 19.5 NOx class 6 Maximum electric power absorbed in heating W 97 Electrical power in stand-by W < 3 Supply voltage V/Hz 230 / 50 Degree of protection IPX5D Domestic hot water delivery (ΔT=35°C) l/min 9.6 Domestic hot water delivery (ΔT=25°C) l/min 13.5 Dimensions (H x W x D) (mm)660x440x285 MOMIJGI The warm embrace of autumn MOMIJI are the red maple trees typical of the Orient, whose leaves color autumn red, a season that the Japanese experience as "comfort". Thanks to the mild climate and temperatures that are once again welcoming (no longer the torrid heat of summer, not yet the freezing climate of winter), taking time out is even more pleasant. Enjoying your home, as well as the foliage, gives well-being. Momiji best interprets the combination of traditional systems and condensing technology. In fact, while integrating perfectly with different systems, it is designed to optimize the condensation technology on radiator systems, responding concretely to the needs for savings and eco-sustainability of this type of heating, extremely widespread but often unable to fully exploit the advantages of condensation. The heating is smart Momiji offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adapting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Momiji Comfort has never been easier Easy, everywhere Like the Rinnai Infinity water heaters, the Momiji boilers are also specifically designed to facilitate the installer's work. The device is small, light and compact. It is ready to use and does not need to be configured. The flue system is split Ø80/80 and, thanks to the high prevalence of the fan, it is possible to reach up to 30 equivalent linear metres. Thermal exchange Momiji has a copper heat exchange, with a large passage section: this facilitates integration into existing radiator systems and simplifies cleaning operations. This range of boilers is the perfect solution for often imperfect traditional systems. Can also be installed outdoors Momiji is IPX5D certified and has the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection Integrated condensate neutraliser The Momiji series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutralizer, in fact, allows you to eliminate the acidity of the condensate (acidic pH water produced by the normal operation of the heat generator, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory that performs this function otherwise essential. Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION POSSIBILITY OF PROPANE SUPPLY THROUGH THE SERVICE CENTER. FOR INFO, CONTACT THE AREA HERMANN ASSISTANCE IN ADVANCE Hermann Saunier Duval THEMA CONDENS 26 kW condensing boiler complete with low NOx flue gas kit - Methane Model: Efficiency class Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating/Sanitary Nominal power Pmin/max heating - 80/60°C kW 5.4 / 26.1 Min/Max Nominal Power (60°C) (kW) DHW 5.1 / 25.5 Continuous flow rate (ΔT = 25K) 15.0 generals Supply gas - Methane Nox class - 5 Electrical protection IPX - 5D Dimensions mm (HxLxP) 740x418x344 THEMA Condens IS Solution for multi-family units Ideal for structures with single flue gas outlet Smoke kit included, non-return valve already installed High sanitary comfort Hot water immediately available thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface Continuous domestic hot water production up to 18 l/min ErP class A+ in combination with MiGo climatic control unit Wall-mounted combined condensing boiler for heating and domestic hot water of multi-family units with single ducting The new Thema Condens IS has a renewed aesthetic with modern and essential lines, with a flat casing and an innovative touch-screen user interface. It is the Hermann Saunier Duval solution designed to replace wall-hung boilers (traditional or condensing) in multi-family complexes where the various boilers discharge into the same flue with a single pressurized ducting system. It is in fact equipped with a dedicated flue kit (included in the supply) for direct connection to a single flue system. The boiler has C(10)3 and C(12)3 certification which makes it possible to install it in multi-family housing structures even where there are boilers from different manufacturers. The high sanitary comfort is guaranteed by the pre-heating function with stainless steel plate sanitary exchanger and by the Aquaspeed® technology for the immediate delivery of hot water. Thema Condens IS is available in two power sizes: the new 26 kW and the 31 kW with methane fuel, but with the possibility of regulation for propane fuel. Standard smoke kit A version dedicated to multi-family systems with a single pressurized ducting system within the same flue, Thema Condens IS is equipped with a standard flue kit that facilitates installation, presenting itself as the optimal solution in case of replacement in the aforementioned structures . The supplied kit consists of an 80/125 mm adapter with an 87° bend and a rigid connection section for connection directly to the main flue outlet of the multi-family complex. The non-return valve is already installed in the boiler. The safety systems present in the kit guarantee maximum reliability of the entire system, safeguarding against the risk of undesired evacuation of exhausted fumes - also coming from other boilers in the housing unit - inside the installation room of the boiler itself, in full compliance with the Italian standard UNI 7129 part 3. Thema Condens IS stands out in its reference market boasting two additional certifications C(10)3 and C(12)3 - thanks to which it is possible to install a condensing boiler inside single pressurized flue systems manufactured by third parties which already include other boilers from different manufacturers, without in any way affecting the level of performance of the system in terms of efficiency and yields in heating and domestic hot water production. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER Hermann Saunier Duval THEMA CONDENS 25 SB heating only condensing boiler complete with low NOx methane or LPG fume kit Model: Efficiency class Heating efficiency class A Heating Fireplace flow rate Qmin/max - 80/60 °C 2.5 - 25.5 generals Product code 0010025115 Dimensions HxWxD 740x418x344 Possibility of propane supply through simple regulation THEMA Condens SB Wall-mounted combined condensing boiler for heating and domestic hot water in single-family units The new Thema Condens has a renewed aesthetic with modern and essential lines, flat casing to facilitate installation (dimensions and hydraulic connections unchanged compared to the previous version) and a new touch-screen user interface. The boiler has been designed as the ideal solution for single-family homes in case of replacement of traditional wall-mounted or condensing boilers that work on high-temperature or low-temperature systems. The high level of sanitary comfort is guaranteed by the exclusive Aquaspeed® technology which is able to offer the user immediate delivery of hot water at the desired temperature, without long waiting times and costly waste of water. The pre-heating of the primary circuit, and therefore also of the secondary stainless steel plate exchanger, in fact ensures an instantaneous response from the boiler to any sudden request for domestic hot water. Thema Condens is available in three power sizes: the 25 and 30 kW versions are joined by the new 35 kW size, all with methane fuel but convertible to propane via simple electronic regulation, without the need for any conversion kit. The range is also enriched with a new solution: the 25, 30 and 35 kW SB version (heating only) , which can be combined with any Hermann Saunier Duval boiler. Even the new SB boilers are methane powered, but electronically convertible to commercial propane. Ideal for installation in single-family homes New FlameFit® combustion system Hot water immediately available thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface New heating only versions of 25, 30 and 35 kW ErP class A+ in combination with MiGo climatic control unit FlameFit® technology: maximum safety, low consumption, reduced emissions. The innovative FlameFit® combustion technology with which the version for single-family units is equipped allows for autonomous adaptability of the boiler to the different types and qualities of gas, always guaranteeing optimized and completely safe operation. In fact, the flame control electrode detects the changing characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting boiler operation to the actual needs of the user. This therefore leads to high performance with a reduced quantity of gas, saving energy and consequently limiting consumption and polluting emissions. The FlameFit® technology makes Thema Condens ready for immediate operation with any type of future gas, without the need for any conversion kit. Touch screen user interface The interface of the new Thema Condens features a modern digital touch display and was developed to facilitate boiler management by the user. The symbology of the various keys allows a quick understanding of the functions of the appliance and of the parameter setting methods according to one's comfort needs. Excellent visibility of parameters and icons Delivery temperature regulation Intuitive navigation Simplified programming All parameters under control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

UNICAL X 24 C condensing boiler Low NOx 6 Complete with methane flue exhaust kit in stainless steel - ErP Technical data according to dir. ErP C24 Minimum/nominal useful power in condensing kW 5 ÷ 25.2 Seasonal heating energy efficiency ambient ηs % 91 Seasonal EFFICIENCY CLASS for heating Useful heat output in high temp. (Tr 60°C / tm 80°C) P4 kW 23.2 Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 87.0 Useful power at 30% of rated thermal power in low temperature regime (Tr 30°C) P1 kW 7.7 Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30°C) η1 % 96.1 Emissions of nitrogen oxides ref. PCS NO x mg/kWh 22 Declared load profile XL Sanitary seasonal EFFICIENCY CLASS Produc. DHW cont. Dt 25 K (mixed) l/min 13.2 Expansion vessel capacity l 10 Max condensate production kg/h 3.86 Heating circuit pressure (min/max) 0.5 / 3.0 bar DHW circuit pressure (min/max) bar 0.5 / 6.0 IP degree of protection X5D NO class x 6 Dimensions (HxWxD) mm 700x420x345 Net weight kg 34 x X like INOX, like the exchanger which is the engine of this wall-mounted condensing boiler. X is available in the instantaneous combined version (13.2 l/min), it runs on both methane and LPG (conversion kit supplied). Characteristics: Premix Low NOx burner (Class 6) IPX5D (also for outdoors) Compact dimensions and compatible with other Unical models (ideal for replacements) Template and unified connections (Unical KONm / KONe ) Minimum thermal power regulation in heating function Electronic antifreeze for operation down to -15 Management of 2 zones with differentiated priorities (high and low temperature) Electronics with HWS "Hot Water Speed" function to eliminate the delay in DHW production and automatic "air vent" function Layout conceived with large spaces for easy maintenance Wide choice of accessories including: - both modulating and on/off control thermostats - external probe for managing both the boiler and one or two high/low temperature zones STAINLESS STEEL EXCHANGER MONOSPIRAL WITH OVAL SECTION WITHOUT WELDING GREATER COMBUSTION VOLUME LESS EMISSIONS / HIGHER PERFORMANCE OPTIMIZED PRESSURE DROP REDUCTION OF DEPOSITS LESS NOISE LONGER DURATION OVER TIME FRONT ACCESS FOR EASY MAINTENANCE Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta CIAO AT 25 C LOW NOx condensing boiler Complete with Fume Kit 20176941 LPG - NEW Technical specifications according to ErP directives Class B heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile - XL Technical features: Nominal heat input kW 25.00 NOx Class 6.00 Total electrical power Watt 102.00 IP electrical protection degree IPX5D Expansion vessel capacity 8 litres Maximum pressure bar 8 Quantity of hot water with Δt=25°C litres/min 14.3 Dimensions Boiler size (HxLxP) mm 715x405x250 CIAO AT with stainless steel heat exchanger BERETTA PRESENTS THE NEW CIAO AT, THE SPECIFIC CONDENSING BOILER FOR REPLACING TRADITIONAL HIGH TEMPERATURE SYSTEMS The new CIAO AT range is proposed in two combined models of 25 kW of power, with methane and LPG respectively. Both models are equipped with DIN standard hydraulic connections, to allow easy replacement of boilers with hydraulic standards other than Beretta. Many new features compared to the previous range. First of all, the new post-exchanger in stainless steel and composite material, which allows it to pre-heat the return water from the primary circuit using the residual heat of the exhaust fumes. The cooled burner, the new electronics and interface, the reduced depth of the boiler which allows installation even in contained recesses, complete the innovative profile of this product, which is preparing to become the reference in the specific segment of the replacement of radiator systems . The simple and linear design, in line with the Beretta style, the compactness of the dimensions and the installation flexibility make CIAO AT easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or recessed, also through dedicated accessories. The Technical Characteristics New layout with compact dimensions and low weight (only 31 kg!) to facilitate transport and built-in installation Traditional copper primary exchanger New and robust finned pack post-exchanger in stainless steel with taste and composite material Sanitary plate heat exchanger with possibility of pre-heating Innovative gas-air combustion supervision system Forced draft sealed chamber boiler with cooled low NOx burner Standard automatic by-pass Modulation range 1:3 Low consumption circulator (EEI ≤ 0.20), 6 m, with anti-blocking Standard analogue hydrometer Low NOx emissions : CLASS 6 (EN 15502-1) Innovative gas valve regulation procedure Sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Maximum installation flexibility: Indoor, outdoor and recessed installation (in a partially protected place) Antifreeze heater kit, hydraulic connections and external probe available as accessories New flue flange with click fit connection: Fast and safe, without the need for an external collar IPX5D electrical protection degree Boiler support template supplied Compatible with BeSmart command Thermostat LOW NOX BURNER CIAO AT is able to satisfy the most demanding requirements in terms of low emissions, in order to make heating appliances less polluting. Thanks to the innovative burner of CIAO AT, of the hyperstoichiometric type, a very low flame temperature is obtained as an effect. This characteristic, combined with the cooling of the burner through the heating circuit water, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors ( EU Regulation 814/2013). NEW INTERFACE The new CIAO AT digital interface, designed with particular attention to ease of use, is equipped with a modern backlit display that allows immediate and complete reading of the information on the operating status of the machine, both for the user and for the installer or maintenance technician. Through six intuitively functional keys it is possible to easily adjust both the temperature in heating and DHW, and access the configuration of the machine parameters, rather than resetting the alarm states. UNIVERSAL INSTALLATION Ciao AT is designed to also be installed outdoors in partially protected places or contained recesses (e.g. Edilbox Beretta), thanks to the board's anti-freeze protection down to 0°C. In colder temperatures it is possible to extend the protection down to -10°C using the special antifreeze heater kit. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Technical features Model : Luna Duo-Tec E 24 + Magician Nominal heat input 24 kW DHW nominal heat input: 24.7 kW Nominal heating heat input: 20.6 kW Heating energy efficiency class: A DHW energy efficiency class: A Load profile : XL Auxiliary electricity consumption: 0.013 ~ 0.030 kW Rated Electric Power: 85W Minimum operating temperature: -5°C Expansion vessel capacity: 8 lire Heating circuit water temperature adjustment: 25° ~ 80° C Sanitary water temperature adjustment: 35° ~ 60° C Specific flow rate according to EN 13203-1 : 11.5 l/min Sanitary water production ∆T 25 : 13.8 l/min DHW circuit minimum water flow rate: 2 l/min Heating circuit water pressure: 0.5 ~ 8 bar Sound power level : 49 dB(A) Degree of Protection : IPX5D Maximum length Ø 60/100 concentric exhaust-intake pipe: 10 m Maximum length of Ø 80 split exhaust-intake pipe: 80 m Maximum flue gas temperature: 80° C Power supply: CNG / LPG Dimensions and weight Dimensions (HxWxD): 763x450x345 mm Weight : 38.5Kg Features Baxi Magician Model: Baxi Magician Maximum cable length for the Baxi Mago bus: 50 m Maximum cable resistance: 2 x 5 ohms Operating conditions : 0°C ~ 60°C Temperature control area : 10° ~ 30° C Dimensions (WxHxD): 120x90x27 mm Baxi Luna Duo-Tec boiler + Mago as standard The ideal condensation both for new buildings and for the replacement of an old generator Aesthetics can change, not performance The already well-known Baxi boilers are presented today with a renewed aesthetic , increasingly modern and attentive to new design trends, which allows them to be inserted in any living context The control panel has also been completely renewed and is equipped with a new backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys The boilers, even more beautiful and modern thanks to the restyling , still keep intact the characteristics that have always distinguished the Duo-tec range Reliability Robustness, durability and reliable performance Efficiency and savings . The reduction of the on/off cycles translates into significant benefits in terms of energy savings and lower emissions Completeness of the range Models for heating only, with instantaneous DHW production, and also the compact version with the possibility of outdoor installation . The range has been further enriched with the new models equipped as standard with the Baxi Mago modulating chronothermostat with integrated WI-FI The ideal boiler for new builds and for replacement The Duo-tec E range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new builds and for replacing an old generator . The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created for the final consumer, so that, through real and comparable data, he can make informed choices by targeting high-efficiency products Comfort management with Baxi Mago The Luna Duo-tec E 24/33 Mago and Duo-tec Compact E 24 Mago boilers are equipped AS STANDARD with the Baxi Mago, the modulating chronothermostat with integrated WI-FI designed to simplify the lives of installers, service centers and end users, as allows you to manage domestic comfort directly from an App , via the Wi-Fi connection. By downloading the dedicated App on your smartphone or tablet, it will be possible to connect to the Baxi Mago to control the temperature, manage programming, view the consumption graph, read any error messages, set the holiday mode, etc. An innovative tool with a unique design, which combines extreme practicality with a modern, captivating aesthetic with a strong appeal. The Duo-tec E range is compatible with the Baxi Mago available as an accessory , for remote boiler control Baxi Mago simplifies your life • Beautiful to look at and easy to use thanks to the comfortable rotary knob and the backlit color screen with large, easy-to-read numbers. Baxi Mago is now also available in the wireless version (wireless) therefore for its installation it is not necessary to drill the wall • Allows automatic and fast programming based on the user's schedule and habits • Allows management from different smartphones and tablets , so that every member of the family can interact • Follows your programs by creating five different daily scenarios linked to multiple temperature requirements ("daytime", "nighttime", "evening", "away from home" scenario, etc.) • It saves you money and you can consult energy consumption graphs with weekly, monthly or yearly trends Digital control panel The Duo-tec E range of boilers is equipped with a new digital control panel with backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way Exchanger preheating function The boilers of the Duo-tec E range are equipped with the exchanger pre-heating function which guarantees the immediate production of domestic hot water at the set comfort temperature. In fact, the sanitary water passing through the plates of the preheated exchanger is already supplied at the desired temperature without waiting times . The function can be easily activated/deactivated by a specific boiler parameter Fully modulating pump with de-aeration The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Efficiency and savings Wide modulation range • Greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions • Adjustment of the thermal power produced to the dissipated power thus avoiding excessive overheating/cooling of the premises GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values Advantages • No manual intervention - reduced measuring, calibration or nozzle changing • With this system, the boiler self-adapts to the quality of the gas and the length of the flue gas pipes, keeping efficiency constant • The boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions Guidelines in case of replacement of a conventional boiler with a new condensing one There are two main problems that can be encountered: • FLUES AND FUME EXHAUST DUCT • CONDENSATE DRAIN To remedy the above it is recommended: the use of a Ø50 mm exhaust pipe Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models). For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes Each Ø50 mm diameter bend decreases the length of the drain by 4m the use of the condensate drain pump Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of these devices also makes it possible to respect the aesthetics of the buildings by avoiding the use of annoying pipes. Main Features Luna Duo-Tec E • Modern and elegant design for the whole range • Baxi Mago STANDARD: Dedicated app for smartphones and tablets for remote control of the boiler (for Luna Duo-tec E 24/33 Mago models); accessory on request for all the other models • Wide modulation range up to 1:7 (1:6 mod. 1.12) greater efficiency and silence • GAC (gas adaptive control): automatic combustion control • Digital control panel with large backlit LCD display • Arrangement for combination with the Baxi integrated solar system • Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - for mod. 24 kW total length 40 meters (intake+exhaust) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code: 3301024 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal thermal power kW 28 Nominal heat input in DHW max/min PCI 30.0 / 3.8 Efficiency at nominal heat input (60/80°C) PCI % 97.9 NOx class Class 6 Maximum heating pressure 3 bar Expansion vessel capacity l 8 Min/max DHW temperature °C 36 / 60 Instantaneous quantity of hot water ΔT=25°C l/min 17.4 Power supply: METHANE Dimensions HxWxD mm 745x400x385 Functionality: / XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head / Class A+ in heating reachable with thermoregulation / Modulation ratio 1:8 / Wifi integrated in the boiler /LCD displays / BusBridgeNet® communication protocol / AUTO function, Comfort / Optimized internal silencer / Installation in partially protected places / Smoke outlet 80, 60, 50 mm CLASS ONE WIFI XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Open Chamber boiler mod. START 28 KI Low NOx - NEW ErP CODE 20151435 Product code: 20151435 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Thermal input: 31.90 kW Thermal power (80-60°C): 28.87 kW Reduced heat input: 14.00 kW Reduced thermal power (80-60°C): 12.36 kW Thermal input: 31.90 kW Reduced heat input: 9.00 kW Reduced thermal power: 7.95 kW Minimum operating pressure: 0.25-0.45 bar Quantity of hot water with Δt 25°C: 16.6 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37-60°C Flow regulator: 10 l/min NOx class: 6 Dimensions HxWxD 450x332x740 mm; Weight: 30 Kg Natural gas supply START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for a quicker achievement of the desired comfort and a reduction in consumption, and in the temperature ranges in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less