ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED ASSISTANCE SERVICE IN ADVANCE Junkers Bosch Open Chamber Boiler Cerastar 18 kw zwr 18-7 ke 23 NOx 6 Code 7736900324 TECHNICAL FEATURES Declared load profile S Energy efficiency class C Water heating energy efficiency class A Rated thermal power Prated kW 18 Annual energy consumption (average climate conditions) QHE kWh - Annual energy consumption QHE GJ 44 Annual electricity consumption AEC kWh 27 Annual fuel consumption AFC GJ 4 Seasonal space heating energy efficiency ηS % 77 Water heating energy efficiency ηwh % 43 Sound power level within LWA dB 46 Useful thermal power At rated heat output and high-temperature regime P4 kW 18.2 At 30 % of rated heat output and low temperature regime P1 kW 5.4 Efficiency At rated heat output and high-temperature regime η4 % 81,1 At 30 % of rated heat output and low-temperature regime η1 % 81,0 Auxiliary electricity consumption At full load elmax kW 0.020 At partial load elmin kW 0.019 In stand-by mode PSB kW 0.007 Other items Heat loss in stand-by Pstby kW 0.177 Ignition burner power consumption Pign kW - Nitrous oxide emissions (for gas and fuel oil only) NOx mg/kWh 22 Other items for combination heaters Daily electricity consumption (average climatic conditions) Junkers Bosch CERASTAR boiler Environmentally friendly and NOx class 6 The Cerastar conventional boiler uses the best technologies to respect the environment. In fact, thanks to its components, the level of polluting emissions is reduced, following the new ErP 2018 regulation. Management via EasyControl smart thermostat The boiler can be controlled via the Bosch EasyControl smart thermostat. The new regulator that allows you to manage home heating directly from your smartphone and that simply adapts to your habits. Zero noise, zero stress The Cerastar boiler is among the quietest in its category, in fact with its 46 decibels (18 kW Cerastar) it will allow you to use all its functions in silence. Hot water, when you want it The Cerastar boiler achieves 3 stars in sanitary comfort according to European standards EN13203-1/2 and allows you to use domestic hot water when you wish. The boiler's Comfort function offers you the possibility of preheating the water, by programming the appliance at specific times based on your routine. The Eco function, on the other hand, is designed to save energy and have a lower impact on bill costs. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Hermann Saunier Duval Themafast Condens 30 CS/1 Methane boiler complete with fume exhaust kit - New Model: Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 3.6 - 25.5 Fireplace flow rate Qmin/max - 60°C 3.6 - 31.0 Sanitary Specific flow rate (∆T = 25K) (EN13203) l/min 17.8 Peak flow rate in 10 minutes (∆T = 30K) l/10 min 148 Dimensions (HxWxD) 740x418x344 ThemaFast Condens All the comfort, immediately. Characterized by a renewed design with modern and essential lines, flat casing to facilitate installation in the home and touch-screen user interface, the new ThemaFast Condens range is positioned at the top of its category in terms of sanitary comfort and consumption reduction . The exclusive Aquaspeed FAST® system and the new 3-litre micro-accumulator ensure immediate delivery of domestic hot water - even in the case of minimal withdrawals - and maximum temperature stability. The new FlameFit® combustion technology is able to autonomously adapt to the different types of gas, always managing to generate perfectly efficient combustion in total safety. The range consists of three models of 25, 30 and 35 kW with methane fuel, convertible to propane through simple electronic regulation. Hydraulic connections and dimensions are unchanged compared to the previous version Superior sanitary comfort New 3 liter microaccumulator Immediate delivery of domestic hot water Maximum temperature stability New FlameFit® combustion technology High modulation up to 1:9 Modern design with touch-screen user interface New diagnostics and malfunction detection Aquaspeed FAST® and new microaccumulator: unique comfort Thanks to the exclusive Aquaspeed FAST ® technology , the domestic hot water is stored in a 3-litre micro-accumulator which guarantees the immediate availability of hot water without the temperature fluctuations typical of the first delivery phase. The new micro-accumulator, made of stainless steel and composite material, is insulated with two expanded polystyrene shells to reduce heat losses in stand-by. Externally, a small resistance (max 25 W) keeps the water always at the desired temperature, avoiding costly multiple ignitions of the burner in case of low flow rate withdrawals. When the withdrawal is greater than 1.7 litres/min, the boiler starts up and, through the instantaneous DHW exchanger, goes into continuous production according to the user's requests. At the end of the withdrawal, the micro-accumulator is already at the set temperature, ready for the next request. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all ThemaFast Condens models are equipped allows the boiler to be independently adapted to the different types and qualities of gas, always guaranteeing optimized and fully safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes ThemaFast Condens ready for operation with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new ThemaFast Condens has a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION FOR THE OPERATION OF THE LPG BOILER IT IS NECESSARY TO CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Beretta MYNUTE E 32C Low NOx condensing boiler complete with flue gas kit 20164602 Methane or LPG Wi-Fi Optional - NEW Boiler code 20164602 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A XL load profile NOx emission class 6 Technical features Heating thermal capacity (max-min) kW 29.00-6.00 Nominal DHW heat input (max-min) kW 31.60-6.00 Expansion vessel capacity on membrane l8 DHW production at ΔT= 25°C / 30°C / 35°C l/min 18.1/15.1/12.9 Supply voltage V-Hz 230 - 50 IP X5D degree of protection DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 29 kgs MYNUTE E BERETTA PRESENTS MYNUTE E, THE NEW CONDENSING BOILER WHICH, COMBINING RELIABILITY AND COMFORT WITH INSTALLATION FLEXIBILITY, IS THE IDEAL CHOICE FOR REPLACING The new MYNUTE E range is divided into three models combined in 25 kW and 32 kW power, one of which is a 25 kW DIN version, to also allow the replacement of boilers with hydraulic standards other than Beretta. The linear and modern design, in line with the recent generation Beretta boilers, the compactness of the dimensions and the installation flexibility make MYNUTE E easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or built-in, using dedicated accessories. The good efficiency, which places the range in class A, the ease of use and maintenance, and the excellent comfort, both in heating and DHW, complete the profile of this product, which will be appreciated for its reliability and functionality, in perfect harmony with the MYNUTE Beretta tradition. MYNUTE E, RELIABILITY AND FLEXIBILITY FOR A WORRY-FREE REPLACEMENT FEATURES Aluminum condensing exchanger Modulation range 1:5 Low consumption modulating circulator (EEI ≤ 0.20), 6 m Low NOx emissions: CLASS 6 (UNI EN 15502) Availability of 25kw model also with sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Installation flexibility: indoor, outdoor and recessed installation (in a partially protected place) The 25C and 25C DIN models are C10 approved. Smoke clapet (non-return valve) available as an accessory Click-fit flue connection: fast and safe, without the need for an external collar Antifreeze heater kit, hydraulic connections and external probe available as accessories IPX5D electrical protection degree “DOUBLE T” template supplied Compatible with hybrid connects for managing up to two system zones Compatible with air-propane gas (25C and 25C DIN models) and with LPG, through optional kits. For gas conversion, contact authorized Beretta Technical Assistance Centres Compatible with BeSmart WiFi comfort control as thermostat (OTBus communication), allowing the most advanced functions Possibility of intubating flues with the special flue in PP ø50, ø60 and ø80 Polyphosphate dosing filter and compact magnetic filter available as accessories Hybrid Ready: Mynute E can be integrated into Beretta multi-energy systems through the Rec 10H Hybrid and the Connect Hybrids, available as accessories CONNECTIVITY WITH BeSMART (wi-fi optional) MYNUTE E is equipped with a control panel that stands out for its ease of use. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the MYNUTE E functions. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE E FUNCTIONS MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC ACCESSORIES PREHEAT PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

NB: FOR THE OPERATION OF THE LPG BOILER IT IS NECESSARY TO CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Beretta MYNUTE E 25C Low NOx condensing boiler complete with Methane or LPG fume exhaust kit - NEW Boiler code 20164601 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A NOx emission class 6 XL Load Profile Technical features Heating thermal capacity (max-min) kW 25.00-5.00 Nominal DHW heat input (max-min) kW 25.00-5.00 Expansion vessel capacity on membrane l8 DHW production at ΔT= 25°C / 30°C / 35°C l/min 14.3/11.9/10.2 Supply voltage V-Hz 230 - 50 IP X5D degree of protection DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 29 kgs MYNUTE E BERETTA PRESENTS MYNUTE E, THE NEW CONDENSING BOILER WHICH, COMBINING RELIABILITY AND COMFORT WITH INSTALLATION FLEXIBILITY, IS THE IDEAL CHOICE FOR REPLACING The new MYNUTE E range is divided into three models combined in 25 kW and 32 kW power, one of which is a 25 kW DIN version, to also allow the replacement of boilers with hydraulic standards other than Beretta. The linear and modern design, in line with the recent generation Beretta boilers, the compactness of the dimensions and the installation flexibility make MYNUTE E easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or built-in, using dedicated accessories. The good efficiency, which places the range in class A, the ease of use and maintenance, and the excellent comfort, both in heating and DHW, complete the profile of this product, which will be appreciated for its reliability and functionality, in perfect harmony with the MYNUTE Beretta tradition. MYNUTE E, RELIABILITY AND FLEXIBILITY FOR A WORRY-FREE REPLACEMENT FEATURES Aluminum condensing exchanger Modulation range 1:5 Low consumption modulating circulator (EEI ≤ 0.20), 6 m Low NOx emissions: CLASS 6 (UNI EN 15502) Availability of 25kw model also with sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Installation flexibility: indoor, outdoor and recessed installation (in a partially protected place) The 25C and 25C DIN models are C10 approved. Smoke clapet (non-return valve) available as an accessory Click-fit flue connection: fast and safe, without the need for an external collar Antifreeze heater kit, hydraulic connections and external probe available as accessories IPX5D electrical protection degree “DOUBLE T” template supplied Compatible with hybrid connects for managing up to two system zones Compatible with air-propane gas (25C and 25C DIN models) and with LPG, through optional kits. For gas conversion, contact authorized Beretta Technical Assistance Centres Compatible with BeSmart WiFi comfort control as thermostat (OTBus communication), allowing the most advanced functions Possibility of intubating flues with the special flue in PP ø50, ø60 and ø80 Polyphosphate dosing filter and compact magnetic filter available as accessories Hybrid Ready: Mynute E can be integrated into Beretta multi-energy systems through the Rec 10H Hybrid and the Connect Hybrids, available as accessories CONNECTIVITY WITH BeSMART (wi-fi optional) MYNUTE E is equipped with a control panel that stands out for its ease of use. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the MYNUTE E functions. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE E FUNCTIONS MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC ACCESSORIES PREHEAT PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE BAXI LUNA3 BLUE+ 240I CNG OR LPG BOILER - NEW ERP Technical features ErP energy efficiency class (heating and DHW): C - B Load profile: XL Open chamber with natural draft Heating/DHW nominal heat output kW 24 Nominal direct efficiency: 90.3% Heating circuit temperature range °C 30/85 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.7 Minimum domestic water flow rate I/min 2 Degree of protection IPX5D Dimensions (hxwxd): 763x450x345 mm ; 33 kgs Power supply: CNG or LPG Luna3 Blue+ Wall mounted compact gas boiler, natural draft - heating only and DHW production (low NOx)   Luna3 Blue+ is the Baxi compact natural draft boiler ideal for replacement. The extremely compact dimensions make this boiler particularly ideal for replacing old natural draft generators connected to branched collective flues, the only installation context allowed by the ErP directive for traditional open chamber boilers. The ErP/EcoDesign regulation in force since 26 September 2015 has forced manufacturers to place on the market products equipped with a high-efficiency pump (since 1 August 2015), which comply with the eco-compatible design requirements and bear an energy label. The legislation also provides that by way of derogation, producers can continue to produce and commercialize ONLY open chamber boilers for installations in domestic contexts, with the restriction of replacement in branched collective flues. Baxi's ranges of conventional B1-type natural draft boilers are precisely designed to meet all installation requirements in branched collective flues. Characteristics: Low NOx and CO emissions: class 5 according to EN 297 and EN 483 already compliant with the legislation that will come into force in 2018 Hydraulic group in brass Control panel with multifunction LCD display STANDARD climate control (with optional external probe) Arrangement for combination with the Baxi integrated solar system High efficiency circulation pump Antifreeze function and IPX5D degree of protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Baxi Luna Duo-tec E 28 Low NOx condensing boiler complete with methane fume exhaust kit Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input 28.9 kW Nominal heating flow rate 24.7 kW Sanitary nominal thermal power 28 kW Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -5°C Expansion vessel capacity 8 Degree of protection IPX5D Dimensions (hxwxd) mm 763 x 450 x 345 Power supply: METHANE Luna Duo-tec General characteristics New modern and elegant design for the whole range Wide modulation range up to 1:7 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display Baxi Mago STANDARD: Dedicated app for smartphones and tablets for remote control of the boiler (for Luna Duo-tec E 24/33 Mago models); accessory on request for all the other models Arrangement for combination with the Baxi integrated solar system Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - for mod. 24 kW Total length 40 meters (intake + exhaust) hydraulic system Electric three-way diverter valve (also for heating only models) Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense even in DHW operation Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which occurs every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX EXA 24 KW METHANE CONDENSING GAS BOILER ERP COMPLETE WITH FUME EXHAUST KIT Immergas Victrix Exa 24 kW boiler Capacity: 24Kw Useful heating power kW: 23.7 DHW useful power kW: 27.7 Type: Instant Modulation range: 23 - 100 % Hot water production (∆t 30 °C) l/min: 13.2 Electrical protection degree IPX: 5D Power supply: LPG or methane Dimensions (HxWxD) mm: 763 x 440 x 300 ; 42kg VICTRIX EXA With VICTRIX EXA comes a generation of condensing boilers that offers all the advantages of condensation in maximum simplicity and economy. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. The condensing module is in stainless steel and the circulator is low consumption. The modulation range of the appliance goes from 23 to 100% of the thermal power. The user interface is simple to use, it is equipped with adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. VICTRIX EXA can also be managed from smartphones, tablets and laptops (the DOMINUS App will be available from January 2016). The casing covering the water connections is standard, to better set up the boiler inside domestic spaces. Approved to operate indoors or outdoors in a partially protected place thanks to the IPX5D degree of electrical protection, the boiler is equipped with standard frost protection down to -5 °C. VICTRIX EXA can also be used in GAUDIUM SOLAR BASE ErP systems. With reduced emissions of carbon monoxide (CO) and nitrogen oxides (NOX), VICTRIX EXA falls into class 5, the most ecological envisaged by European standards (UNI 297 and 483). The VICTRIX EXA range offers all the advantages of condensation in maximum simplicity and economy. The most compatible technology with the new European Directives and with the aim of reducing energy consumption, is presented in the most economical and effective way for many new installations and replacements of existing appliances. The VICTRIX EXA are two instantaneous boilers of 24 and 28 kW, capable of making a consistent contribution to raising the energy efficiency class in space heating and in the production of domestic hot water. Wall installation is easy both indoors and outdoors and the VICTRIX EXA range also offers the possibility of operating with propane air by choosing the dedicated conversion kit. The condensing module is in stainless steel and the circulator is low consumption, all made more comfortable and easy to install thanks to the compact dimensions. The user interface is simple to use, it features adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. The lower casing to cover the connection pipes is standard, while the connection group is optional for all models SIMPLICITY OF CONTROLS The boiler also features an advanced and easy-to-use user interface with LCD display, selection buttons and adjustment knobs. The latter allow you to make temperature adjustments quickly and easily. ECOLOGICAL BOILER VICTRIX EXA has low emissions of carbon monoxide (CO) and nitrogen oxides (NOx) such as to be included in class 5, the most ecological in the classification established by the European standards UNI EN 297 and UNI EN 483. They can therefore discharge through the wall in the cases provided for by Legislative Decree 102 of 4 July 2014. CLASS A CIRCULATOR The low-consumption circulator allows considerable savings in electricity compared to a traditional circulator and adjusts its consumption according to the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: ACTA NOX 28A Heating energy efficiency Class: C Sanitary Energy Efficiency Class: B Withdrawal profile: XL Heating/DHW nominal heat input: 30.7 kW Heating/DHW maximum useful power: 27.6 kW Yield name 60°/80°C: 90% Yield at 30% load: 89.3% Energy efficiency stars: (dir 92/42/EEC) ** NOx class: 6 Weighted NOx: 28 mg/kWh Minimum/maximum heating temperature: 38/85 °C Minimum/maximum heating pressure: 0.3/3.0 bar Capacity of the expansion tank (total): 8lt DHW minimum/maximum temperature: 35/60°C Maximum flow rate (ΔT=25 K) / (ΔT=35 K): 15.8/ 11.3 l/min Specific sanitary flow rate (ΔT=30 K): 12.5 l/min Voltage / Power at nominal heat input V~/ W: 230~/56 Degree of protection: IPX4D Minimum/maximum flue gas temperature: 83 / 130°C Extremely compact dimensions hxwxd: mm 703x400x325 CNG or LPG power supply ACTA NOX ACTA NOX is the range of Savio boilers designed to meet modern housing needs that require reliable, compact and high performance products. The ACTA NOX range includes open chamber boilers with power ratings of 24 kW and 28 kW . The ACTA NOX series is suitable for heating and domestic hot water production. ACTA NOX has very compact dimensions which make it easy to place in any environment. Characteristics: High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel Water cooled low NOx burner High efficiency pump with low energy consumption Integration with SAVIO solar systems using a solar kit Digital control panel with display. The electronic card allows you to: Adjust the ignition pressure Adjust the restart frequency Manage the post-circulation of the high efficiency pump View fault diagnostics and lockout status. Also available : Boiler antifreeze safety Primary circuit thermal inertia disposal. Primary exchanger ACTA NOX features a water-cooled burner which allows to achieve high efficiency combustion and to limit the emissions of polluting substances. The burner is therefore characterized by a flame at a lower temperature than traditional boilers, which reduces the production of nitrogen oxides. Even the shape of the flame is specific to the water-cooled burner, in fact, it presents the flame in a uniform manner and with a reduced height. This makes ACTA NOx the SAVIO product that satisfies the needs of maximum domestic comfort and respect for polluting emissions. Secondary exchanger ACTA NOX is available in a mixed version for heating, domestic hot water production: the hot water is supplied at an adjustable and constant temperature thanks to the electronic modulation of the boiler. The DHW exchanger is made of stainless steel and has a low inertia which guarantees excellent performance. Control panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Thermo-hydrometer for reading the water pressure on the primary side. Integration with solar ACTA NOX can be easily combined with a solar system using the Biasi solar kit. Simple and immediate to install, it does not require electrical parts and allows optimizing the integration of the solar system with the boiler which intervenes only when necessary to guarantee the required comfort temperature. Thermoregulation Hydraulic groups of innovative conception: Motorized 3-way valve Integrated automatic by-pass: allows the boiler to adapt to the needs of modern heating systems Absolute heating pressure switch: guarantees protection of the boiler in the event of a lack of water or circulation Sanitary flowmeter Easily accessible filling tap Drain tap Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy class in heating: A; Energy class in sanitary: A; Load profile: XL; Nominal heat input (min/max): 3.5/34.60; Electric power (min/max): 25/116W; NOx Class 5 Power supply: METHANE. Heating performance: Maximum pressure: 3bar; Heating temperature range: 20 - 80 °C; Pump: maximum head available to the system: 320 mbar; Expansion tank capacity: 10 litres; Performance in Healthcare: Pressure (min./max): 0.2/ 8 bar; Quantity of hot water with ∆t=25°: 17.2 litres/min Minimum domestic water flow rate: 2 litres/min; Domestic hot water temperature range (min./max): 35/60 °C; Sanitary water content: 60 litres; Functions: Condensing exchanger: which allows to guarantee high performance while respecting the European directives in terms of energy efficiency and low emissions; Comfort: which automatically adjusts the temperature based on the external climate; Modulation 1:10: avoid energy waste by offering you the real energy requirement. Low consumption modulating circulator: Reduces electricity consumption by up to 60% General characteristics The Exclusive Boiler Green HE boiler is managed by a high modulation range (1:10), and by a low consumption modulating circulator, offering efficiency and high technology such that it can also integrate solar systems and innovative technological systems. For easy and efficient management of the boiler, there is an intuitive liquid crystal display which allows you to program and set the numerous functions available, as well as to adjust the temperature of the domestic hot water simply by turning the appropriate knobs. pressing a key activates the easy filling function which allows the boiler to be filled, always having hot water available and satisfying one's comfort. The panel integrates the climate function thus allowing the temperature to be adjusted automatically Dimensions (HxWxD) 950x600x462 mm; 68kg.

Read more less

Sime VERA 25 HE condensing boiler Low NOx flue gas kit Methane - New ErP Vera 25 HE model Heating energy efficiency class A Sanitary energy efficiency class A XL load profile Performance Nominal / minimum heat output (80-60°C) kW 19.8 / 3.8 Nominal heat input in heating kW 20 DHW nominal heat input kW 24 Useful efficiency 30% of the load (40-30°C) % 108.4 Heating sound power dB (A) 54 Electrical protection degree IP X5D Heating expansion vessel capacity l 9 Dimensions HxWxD 700x400x250 VERA HE THE BOILER FOR EVERY TYPE OF SYSTEM Vera HE is the range of premixed wall-mounted condensing boilers that adapt to different system solutions. Thanks to the high head of the circulator, it is perfect for managing radiant floor systems without the use of booster pumps. The compact dimensions make it suitable for replacing existing fixtures and for outdoor or recessed installation using simple accessories. Vera HE features a new single-tube primary exchanger in stainless steel which boasts larger water passage sections compared to market standards, thus offering low pressure drops to the hydraulic system. The single-tube geometry guarantees higher water speeds, preventing deposits and encrustations and furthermore facilitating the cleaning of the exchanger. ACTIVE COMBUSTION CONTROL Vera HE is the range of premixed wall-mounted condensing boilers that adapt to different system solutions. Thanks to the high head of the circulator, it is perfect for managing radiant floor systems without the use of booster pumps. The compact dimensions make it suitable for replacing existing fixtures and for outdoor or recessed installation using simple accessories. Vera HE features a new single-tube primary exchanger in stainless steel which boasts larger water passage sections compared to market standards, thus offering low pressure drops to the hydraulic system. The single-tube geometry guarantees higher water speeds, preventing deposits and encrustations and furthermore facilitating the cleaning of the exchanger. The advanced control electronics check the combustion parameters at all times thanks to the flame sensor electrode and adjust the gas valve accordingly so as to always obtain the right air-gas ratio. The main advantages are: Simple commissioning, high reliability and low maintenance over time Compensation of combustion drifts caused by ageing, oxidation and insulation losses Ease of methane/LPG gas change using a simple parameter Guarantee of minimum polluting emissions guaranteed over time. Characteristics: Exchanger with oversized sections New heat exchanger with oversized water passage sections High head circulator Also suitable for radiant systems Active combustion control With electronic gas valve Three-piece shell For easier maintenance Can be installed externally or recessed Using special accessories or kits Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS EQUIPPED WITH AUTOMATIC COMBUSTION CONTROL. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Baxi Luna Air 24 kw built-in boiler complete with methane or LPG outdoor fume exhaust kit A7740032 Integrated Wi-Fi Technical features Sanitary nominal thermal power: 24 kW WI-FI control panel kit STANDARD in the Luna Air model WI-FI: Hybrid App for smartphones and tablets for remote control of the boiler Heating nominal heat input: 20.6 kW Heating rated thermal power 80/60°C: 20 kW Heating rated thermal power 50/30°C: 21.8 kW Reduced thermal power 80/60°C: 3.4 kW Reduced thermal power 50/30°C: 3.7 kW Useful efficiency (pci) PN – average temperature 70°C: 97.7% Nominal efficiency 50/30°C: 105.8% Seasonal space heating energy efficiency class: A Seasonal energy efficiency class of the sanitary fixture: A Water heating - Load profile: XL NOx class 6 according to EN 15502 Emission of nitrogen oxides NOx 15 mg/kWh Degree of protection: IPX5D Primary water/gas coil exchanger in AISI 316L stainless steel Secondary water/water exchanger in oversized stainless steel Electric 3-way diverter valve Modulating fan with electronic speed variation Automatic by-pass on the heating circuit Dimensions (boiler) hxwxd: 770 x 470 x 238 mm Dimensions (case) hxwxd: 1170 x 600 x 240 mm MOON AIR Luna Air is the new range of condensing boilers ideal for outdoor installations. remote digital control panel with LCD display as standard suspended installation in partially protected places open-air suspended installation with cover kit, available as an accessory minimum operating temperature: -15°C antifreeze function and IPX5D protection degree wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control built-in installation: the ultra-compact dimensions of the boiler, 770x470x238 mm, allow it to be installed in the majority of boxes on the market; recessed telescopic fittings kit available as an accessory predisposition for combination with the Baxi integrated solar system connection to Ø50 mm rigid and flexible drain pipe - for mod. 24 kW total length (exhaust+intake) 40 metres: solution for renovating flues and in case of replacement of a natural draft boiler with a condensing boiler With Luna Air it is possible to create three different installations: suspended installation in partially protected places; open-air wall-hung installation with cover kit; recessed installation with containment box Product Guarantee : All products for sale on our site are new and packed. The warranty on this product is 24 months from the date of purchase

Read more less

Fondital ISCHIA KC 24 kW condensing boiler complete with flue gas exhaust kit Low NOx Methane - ErP Energy efficiency class in heating A XL load profile Nominal thermal power (Pnominal) kW 23 Nominal heat input (Qn) kW 23.7 Seasonal space heating energy efficiency (ηs) % 92 Thermal power (50-30°C) kW 24.9 Heating expansion vessel capacity l 9 Specific sanitary flow rate ΔT=30K l/min 13.4 NOx emission class - 6 Supply voltage/frequency V/Hz 230/50 IP electrical protection degree IPX4D Dimensions 400x700x250 Natural gas supply ISCHIA KC Ischia KC is a sealed chamber condensing boiler with forced draft for the production of hot water for heating and the instantaneous production of domestic hot water; PLUS High domestic hot water production, more power during domestic hot water operation (28 - 30 kW) Class 6 of NOx emissions Modulation ratio 1:9 Multifunction relay for connection to systems with zone valves or external pump management or remote alarm signalling 9 liter expansion tank High efficiency modulating circulator with built-in deaerator TECHNICAL FEATURES LCD user interface with diagnostics Management of 2 types of solar thermal system (with additional kit) Thermoregulation with external probe (optional) Compact, only 250 mm deep Arrangement for connection to the Remote Control (optional, supplied by the manufacturer) Programmable parameters to adapt the boiler to the installation and alarm history Automatic by-pass Heat exchanger in thermopolymers and stainless steel 3-speed circulator with built-in deaerator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less