AVAILABLE TO ORDER IMMERGAS VICTRIX SUPERIOR 32 KW CONDENSING COMPLETE WITH KIT FOR METHANE FUME EXHAUST - NEW ERP Technical features Product code: 3.025503 Type: INSTANT condensing boiler Energy efficiency Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Rated useful power: 32 kW Hot water production (∆t 30 °C) l/min: 15.3 Nominal / (real) system expansion tank capacity liters 8.0 / (5.8) System expansion vessel pre-charge pressure bar 1.0 Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16) Useful thermal power for hot water production kW (kcal/h) 32.0 (27,520) DHW adjustable temperature °C 30 - 60 DHW circuit minimum dynamic pressure bar 0.3 DHW circuit max pressure bar 10 Min. domestic hot water withdrawal 1.5 litres/min Characteristics Power supply V/Hz 230 - 50 Nominal absorption A 0.78 Power absorbed in stand-by W 5.5 Electrical insulation degree IP X5D Dimensions Dimensions (HxWxD): 835 x 440 x 350 VICTRIX SUPERIOR Low consumption: the modulating circulator automatically adapts operation to the conditions of use and reduces electricity consumption. Maximum domestic comfort: the 2-litre micro-accumulator speeds up hot water delivery and reduces waiting times compared to other instantaneous boilers. High seasonal yields: the wide modulation range of the boiler allows high seasonal yields with a consequent reduction in gas consumption. Display: large, backlit liquid crystal, provides the main operating information. Thermoregulators: optional. They improve comfort and increase energy savings. Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Renewable energy: can be combined with solar systems. High flexibility: approved to operate indoors and outdoors in partially protected places. IPX5D electrical protection. Standard antifreeze up to -3 °C. OTHER CHARACTERISTICS: HIGH HYDRAULIC PERFORMANCE With the low energy consumption modulating circulator and the possibility of setting the ∆t on the system, these boilers are ideal on systems equipped with zone and thermostatic valves, to enhance the condensing operation of the appliance, reducing consumption energetic. HIGH EFFICIENCY IN ALL SEASONS Even in mid-season, when energy absorption is limited, efficiency is still high and running costs are reduced thanks to the modulation range from 12.5% ​​to 100% of the power. TECHNOLOGY AND SIMPLICITY OF USE The large and functional backlit liquid crystal display allows easy reading of all the main information relating to operation. Two practical knobs allow you to control the device. § INSTALLATION FLEXIBILITY With 19 cm of space between the water connections and the wall, it can be easily installed in any replacement; moreover, the boilers are designed for internal or external installation in partially protected places. The standard antifreeze protection is down to -3 °C and can be extended, with a suitable optional kit, down to -15 °C. Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

NB THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Riello Open Chamber boiler mod. START 24 KI Low NOx - NEW ErP CODE 20151434 Product code: 20151434 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.7 kW Heating/DHW nominal heat output: 24 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°): 90.1-86.4% Profit return 30% (47th return): 89.2% Open chamber with natural draft NOx class: 6 Min/max heating operating pressure: 0.25-3 bar Max absorbed electric power: 47 W Expansion vessel: 8 litres Min/max pressure in DHW: 0.15-8 bar Quantity of hot water with Δt 25°C: 13.8 l/min Quantity of hot water at Δt 30°C: 11.5 l/min Quantity of hot water at Δt 35°C: 9.9 l/min Sanitary water temperature selection range: 37-60°C Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs Electrical protection degree: IP X5D Power supply: METHANE Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX CX GREEN 24 EU CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW 2017 MODELÿThe new compact condensing boiler with aluminum alloy condensing exchanger with all the necessary requirements to achieve the required standards in terms of energy savings Technical specifications Product code:ÿ3310508 Energy label specifications according to the European ErPÿ directive ClassÿA heating energy efficiency Sanitary energy efficiency ClassÿA Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat input in heatingmax/min (Hi):ÿ23.5/4.5ÿkW Nominal heat input in sanitary max/min (Hi):ÿ23.5/4.5ÿkW Heating max/min thermal power (80øC-60øC):ÿ23/4,4ÿkW Efficiency at nominal heat input:ÿ97.7 / 88% Efficiency 30% of nominal heat input:ÿ104.3 / 94 % Capacity of the expansion vessel: 8 lt Min/max heating temperature (high temperature range)øC 35/82 Min/max heating temperature (low temperature range)øC 25/45 Sanitary temperature min/maxøC 36/60 Instantaneous quantity of hot water T=25øC l/m 13.9 Instantaneous quantity of hot water T=35øC l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply Voltage/Frequency V/Hz 230/50ÿ Total absorbed electrical power W 34ÿ Electrical protection degrees IP X5D Main features CX GREEN EU The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy savings. Operationssolmethane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with T = 25§C. (24kW) Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4 star efficiency of combustion in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones using Expert Control. Self-diagnosis system by code. LCD display. Convenience of installation use Possibility of connection with external probe. Compatible with Expert Control, modulatingÿ and on/off accessories. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 20% energy savings in combination with chronothermostat external probe. 40% reduction in CO2 emissions**. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres or As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

nb: LPG conversion kit supplied as standard Ariston CARES S 30 EU condensing boiler complete with flue gas exhaust kit Methane or LPG low NOx 3301638 - NEW Heating energy class A Energy class A for sanitary facilities XL load profile Nominal heat output max min heating 24.0/5.8 kW kW Nominal thermal capacity max min sanitary 29.0/5.8 kW kW Heating temperature max min 82 / 35 °C Quantity of hot water deltaT=25°C 16.0 litres/min Power supply voltage frequency 230/50 V/Hz Electrical protection grade X5D IP NOx class 6 CARES S The condensing boiler suitable for every need, able to combine great performance and high robustness. Thanks to the stainless steel condensing exchanger, CARES S represents the right balance between comfort and performance. Reduction of energy consumption up to 35% Stainless steel condensing exchanger More robust design thanks to the new metal front panel Better accessibility thanks to the front hydrometer MADE IN ITALY produced entirely in Italy SMALL SIZE small footprint for easy installation SYSTEM MANAGEMENT new communication protocol designed to ensure complete management of the system. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED ASSISTANCE SERVICE IN ADVANCE JUNKERS BOSCH CERAPUR BUILT-IN CONDENSING BOILER ZWB 24-1 EI 24 kW INCLUDING FUME KIT - NEW ErP ErP energy class (Heating and DHW) For heating and domestic hot water production Nominal heat input in DHW kW 24.49 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat input (sanitary): 7.4 kW Sanitary flow rate ΔT = 30 K: 11.5 l/min NOx class: 5 Voltage v(AC): 230 HZ frequency: 50 Absorbed electric power: 140 W IP Protection Degree: X5D Dimensions: 243 x 533 x 775; 47 kgs Standard: Controllable from home - Management of the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. CerapurRecessed CERAPUR INCASSO is designed for concealed installations and encloses maximum comfort in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. In fact, CERAPUR INCASSO integrates perfectly into the façade thanks also to the possibility of painting the "shell" with the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in the niche in the wall Controllable from inside the house - Management of the boiler directly from inside the house, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the aluminum alloy construction of the primary exchanger Electrical insulation - The boiler has an IPX5D degree of electrical insulation Characteristics: Wall-mounted condensing boilers for outdoor use with DHW production that can be combined with solar thermal systems for DHW using the Solar Kit. C13, C33, C63, C83, B33 type certifications obtained. Suitable for use with Ø 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a special niche, dedicated to the built-in Guscio (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the DHW and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW and heating). Patented high efficiency silicon-aluminum alloy primary heat exchanger. Oversized sanitary plate heat exchanger for condensing also in DHW. Heating side expansion vessel of 6 litres. Circulator in Energy Class A. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital ITACA KC 32 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - LPG Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 30.4 kW Nominal heat output: 32.3 kW Efficiency at maximum power: 96.8% Efficiency at 30% load: 108.3% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 16.2 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 10 l Heating consumption at nominal power Natural gas m3 /h 3.22 DHW consumption at nominal power Natural gas m3 /h 3.65 Total absorbed electric power: 99 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 40kg LPG power supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with room temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion vessel Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX NIAGARA C GREEN 25 EU CONDENSING BOILER Cod. 3310336, COMPLETE WITH FUME EXHAUST KIT - NEW ErP : wall-hung condensing boilers with integrated storage. Technical specifications Product code: 3310336 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Rated heat output max/min (Hi) Qn:ÿ22/5,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ21,6/5,2ÿkW Useful heating power50§ C/ 30§ C max/minÿ23,5/5,8ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ25/ 5.5 kW Efficiency at nominal heat input:ÿ98% Efficiency 30% of nominal heat input:ÿ109.1% Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 10 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Specific flow rate in compliance with EN 625 at 30§C: 19 l/min Hot water flow rate at T 35§ C: 16.3 l/min Hot water flow rate at T 25§ C: 22.8 l/min Maximum absorbed power; W 70 Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ900 x 600 x 465ÿ; 57kg LPG fuel supply Features list NIAGARA C GREEN Ebus2 EU Condensation associated with sanitary comfort (2 20-litre boilers) integrated in just 60 cm wide for total comfort.ÿPower, compact dimensions and high technology for the most demanding. Sanitary comforts 40 liter reserve thanks to 2 standard stainless steel inter-accumulators. Stratified storage tanks: the advantages of domestic hot water storage and instantaneous production. Permanent availability of domestic hot water even in the event of exhaustion of the accumulated hot water reserve. Power optimization thanks to a continuous modulation of the DHW pump flow rate. Domestic hot water performance ***, maximum level unexpected by the EN 13203 standard. Flow rate of 27.6 l/min with T = 25§C. Integrated 2-litre sanitary expansion tank. Heating comfort 4 star efficiency of combustion in compliance with the EN92/42 standard. High modulation ranges from 25% to 100%. Total premix modulating burner and stainless steel heat exchanger. Modulating fan and pump to improve acoustic comfort and reduce energy consumption. Climatic thermoregulation for the management of 2 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. Front panel programming with drop-down menu: history, permanent self-diagnosis, operating temperature, weekly programming and display of all information on the settings. SRA function, automatic boiler regulation system according to heating requirements. Convenience of installation use Easy component management: common internal layout with the rest of the Chaffoteaux range. Easier start-up: automatic purge function and directly accessible combustion adjustment. Easy maintenance: all components can be accessed from the front. Complete solar system regulation (with optional solar clip in). Energy saving Final 23% energy savings in combination with Easy Control and the SRA function. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER. IT WILL BE SHIPPED WITHIN 10 BUSINESS DAYS FROM THE DATE OF PURCHASE. ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.4% Expansion/pre-charge vessel capacity l/bar 7.5/0.8 Sanitary water temperature adjustment °C 35-60 Boiler capacity 40 l Boiler expansion vessel capacity/pre-charge l/bar 2/3.5 Sanitary water production ∆T 25°C l/min 13.8 Sanitary water production at discharge ∆T 30°C l/30' 385 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (hxlxp): 950x600x466 mm ; 65.5 kgs Power supply: CNG or LPG Cloud Platinum+ Wall mounted gas condensing boilers for heating and DHW production with storage Total modulation pump The Luna Platinum+ range is renewed with the introduction of a high efficiency electronic pump with permanent magnet motor. The new fully modulated pump allows, compared to using a pump Traditional modulating: Lower electricity consumption Better performance Greater durability Plant deaeration New electronic "system deaeration" function to facilitate the removal of air during initial ignition. Efficiency and savings The objective of a heat generator is to supply the energy necessary to the rooms to maintain conditions of maximum comfort inside them: this means supplying the rooms, through the system, with the same amount of heat that the building loses . In new buildings, the regulations increasingly require greater insulation and consequently less dispersion. Usually there is a tendency to oversize heat generators to favor the production of sanitary water: this leads to an excess of power in heating which, together with the poor modulation capacity of traditional boilers, causes discontinuous functioning and therefore waste of fuel. Discontinuous processes generate energy losses (heat dispersion caused by the pre-washing of the combustion chamber, component wear caused by continuous on-off, decrease in generator efficiency). The modulation system of the Platinum+ range is able to adapt the thermal power produced to the effective power dissipated by the building, avoiding excessive overheating/cooling of the rooms. Wide modulation range Reduction of on-off cycles The graph shown above highlights the reduction in on/off cycles which distinguishes the new Platinum+ boilers with modulation up to 1:10 compared to a condensing boiler with lower modulation. The reduction of the on/offs determines an improvement in the efficiency of the boiler and consequently a considerable saving for the end user. Standard condensing boilers, on the other hand, with a limited modulation range work at a minimum power level above 6 kW; this allows it to avoid the on/off cycles for only 3% of the period of operation in heating, compromising the performance of the boiler and the life of the components. GAC: Gas Adaptive Control The electronics and the gas valve with stepper motor that the new Platinum+ boilers are equipped with guarantee automatic combustion control which is based on: on the flame signal GAC via the flame signal The system continuously measures the flame signal during boiler operation and adjusts the gas flow rate in order to keep the combustion quality constant and all this without requiring any additional component inside the combustion chamber. Installers and end users enjoy the following benefits of the GAC: The automatic combustion control favors a reduction in installation times as no manual adjustment of the gas valve or nozzle change is required: in fact, it is sufficient to manually modify some parameters of the electronic board for operation with LPG The boiler self-adapts to the quality of the gas and the length of the flue gas outlets: this means that there are no manual adjustments to make High modulation field 1:10: high efficiency and savings, since such a wide modulation field determines a greater adaptability of the boiler to the thermal dispersions of the building to obtain a higher efficiency and greater durability of the components. The reduction of the on/off cycles, in addition to the greater efficiency, guarantees less noise produced by the boiler Unlike traditional condensing boilers, the boiler always works adjusted to maximum efficiency values ​​favoring a reduction in gas consumption and consequently a lower environmental impact thanks to the control of CO/CO emissions Power sets The term Power set identifies the heating power regulation process according to the project data. The thermal capacity of the boiler, through the Power set device, is adjusted according to the energy requirement: just act on the control panel to adjust some parameters Full soundproofing C structure Silence is the relative or absolute absence of sound or noise. The noise level of the Luna Platinum+ boiler is comparable to a normal conversation Digital pressure gauge The electronic pressure transducer in the hydraulic unit allows you to check the pressure directly on the display. Double alarm level in the event of low pressure: a "warning" level in the event of low pressure in the boiler; a "block" level in the event of a lack of pressure Intubation solution For the rehabilitation of flues Baxi has developed a system that allows easy ducting into existing flues thanks to a Ø50 mm exhaust pipe (for 24kW models). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Replexa 25 kis condensing boiler complete with methane fume exhaust kit - NEW Energy class in heating A Energy class in sanitary A XL load profile Heating nominal heat input kW 25 DHW nominal heat input kW 25 Useful efficiency (80°-60°) pn max. - pn min. % 96.7-95.8 Supply voltage V - Hz 230-50 IP X5D degree of protection Maximum heating pressure bar 3 Expansion vessel l 8 Maximum pressure bar 8 Hot water production with t+25 °cl/min 14.3 Dimensions (H×W×D) mm 740X420X275 Replexa Compact, reliable and versatile, REPLEXA is the ideal boiler for carefree replacement. Specially designed by Riello for quick and easy installation, REPLEXA comes with a wide range of accessories that allow it to be placed both inside the home, outside (in partially protected places) and recessed (KIS models). . Equipped with DIN standard hydraulic connections, REPLEXA is the right answer for those who want to replace their old boiler with a Riello model. The new range, thanks to the modern and essential aesthetics, in line with the new generation Riello products, integrates easily into any living environment, even in new buildings. So many features and pluses of Replexa, all to be discovered, which will soon be appreciated by both the user and the installer. TECHNOLOGICAL AND RELIABLE RIELLO REPLEXA IS CANDIDATE TO REPRESENT A NEW REFERENCE IN THE REPLACEMENT SEGMENT The new range guarantees low consumption and good energy efficiency, reaching class A, both in heating and DHW. A vast range of accessories makes REPLEXA the ideal choice in case of replacement, responding to the various installation needs. Ease of use and installation, together with the reliability that has always characterized the Riello offer, complete the profile of REPLEXA, which will soon be appreciated on the market by both users and installers. LOW NOX EMISSIONS: CLASS 6 (UNI EN 15502) MODULATION RANGE 1 : 5 ALUMINUM CONDENSING EXCHANGER 8 LT EXPANSION TANK, SIDE INCREASED PLATE EXCHANGER, FOR EXCELLENT SANITARY COMFORT MODELS 25 KIS - 25 IS C10 APPROVED. FUME CLAP (NON-RETURN VALVE) AVAILABLE AS AN ACCESSORY ELECTRICAL PROTECTION DEGREE IPX5D COMPATIBLE WITH AIR-PROPANE GAS (25 KIS AND 25 IS MODELS) AND LPG, THROUGH OPTIONAL KITS Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Overview CHAFFOTEAUX NIAGARA C GREEN 25 EU CONDENSING BOILER Cod. 3310336, COMPLETE WITH FUME EXHAUST KIT - NEW ErP : wall-hung condensing boilers with integrated storage. Technical specifications Product code: 3310336 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Rated heat output max/min (Hi) Qn:ÿ22/5,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ21,6/5,2ÿkW Useful heating power50§ C/ 30§ C max/minÿ23,5/5,8ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ25/ 5.5 kW Efficiency at nominal heat input:ÿ98% Efficiency 30% of nominal heat input:ÿ109.1% Energy efficiency stars: (dir 92/42/CEE) **** Capacity of the expansion vessel: 10 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Specific flow rate in compliance with EN 625 at 30§C: 19 l/min Hot water flow rate at T 35§ C: 16.3 l/min Hot water flow rate at T 25§ C: 22.8 l/min Maximum absorbed power; W 70 Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ900 x 600 x 465ÿ; 57kg METHANE power supply Features list NIAGARA C GREEN Ebus2 EU Condensation associated with sanitary comfort (2 20-litre boilers) integrated in just 60 cm wide for total comfort.ÿPower, compact dimensions and high technology for the most demanding. Sanitary comforts 40 liter reserve thanks to 2 standard stainless steel inter-accumulators. Stratified storage tanks: the advantages of domestic hot water storage and instantaneous production. Permanent availability of domestic hot water even in the event of exhaustion of the accumulated hot water reserve. Power optimization thanks to a continuous modulation of the DHW pump flow rate. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate of 27.6 l/min with T = 25§C. Integrated 2-litre sanitary expansion tank. Heating comfort 4 star efficiency of combustion in compliance with the EN92/42 standard. High modulation ranges from 25% to 100%. Total premix modulating burner and stainless steel heat exchanger. Modulating fan and pump to improve acoustic comfort and reduce energy consumption. Climatic thermoregulation for the management of 2 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. Front panel programming with pull-down menu: history, permanent self-diagnosis, operating temperature, weekly programming and display of all information on the settings. SRA function, automatic boiler regulation system according to heating requirements. Convenience of installation use Easy component management: common internal layout with the rest of the Chaffoteaux range. Easier start-up: automatic purge function and directly accessible combustion adjustment. Easy maintenance: all components can be accessed from the front. Complete solar system regulation (with optional solar clip in). Energy saving Final 23% energy savings in combination with Easy Control and the SRA function. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX MIRA ADVANCE 30 kW GAS BOILER LINK Wi-Fi METHANE WITH FUME EXHAUST KIT Model: Mira Advance Link; Typology: Condensation; Code: 3310613; Energy class in heating: A++; Energy class in sanitary: A; Load profile: XL; Power supply: LPG/CNG AutoAdapt function; Heating performance: Nominal heat input in heating (max/min): 31.1/3 kW; Useful heating power 80º C/ 60º C (max/min): 27.5/2,8 kW; Useful heating power 50º C/ 30º C (max/min): 30.3/3.1 kW; Expansion vessel pre-charge pressure: 1 bar; Maximum pressure: 3bar; Expansion vessel capacity: 8 l; Min/max heating temperature (high temperature range): 35 / 82 °C; Min/max heating temperature (low temperature range): 20 / 45 °C; Efficiency at nominal power 60/80: 98.4%; Efficiency at nominal power 30/50: 108.3%; Efficiency at 30% of nominal power: 109.5%; Up to 25% energy savings in combination with Expert Control and the SRA function; Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor; Reduced polluting emissions, NOx Class 6; Performance in Healthcare: Thermal capacity (max/min): 30.0/ 3.0 kW; Useful power (max/min): 33.3/3.3 kW; Temperature (min/max): 36 / 60 °C; Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 14.3 l/min; Instantaneous quantity of hot water ∆T=25°C: 17.2 l/min; Instantaneous quantity of hot water ∆T=35°C: 12.3 l/min; Minimum withdrawal of hot water: 2 l/min; Sanitary water pressure (max/min): 7.0 / 0.2 bar; Electrical data: Supply voltage: 230V; Power Consumption: 91W; Electrical protection degree: IP X5D; Minimum ambient temperature of use*: >0; Installation: Installation in partially protected places; Smoke outlets 80, 60, 50 mm; Intuitive electrical connections; Dimensions: (HxWxD): 745x400x385mm; Weight: 32.3kg; MIRA ADVANCE LINK Mira Advance Link, powerful core for amazing control. Equipped with the innovative SpinTech exchanger, it excels in its category thanks to the electronic combustion control, integrated Chaffolink connectivity, Expert Control and standard external probe. Can be installed in partially protected places Maximum Performance: New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. Maximum Comfort Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Chaffolink connectivity integrated in the boiler. External temperature from the internet thanks to integrated connectivity. Ease of Installation Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. Energy saving and respect for the environment Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX CX GREEN 24 EU CONDENSING GAS BOILER COMPLETE WITH LPG FUME KIT Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL LPG supply Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi): 23.5/4.5 kW Max/min DHW nominal heat input (Hi): 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW Efficiency at nominal heat input: 97.7 / 88% Efficiency at 30% of the nominal heat input: 104.3 / 94% Expansion vessel capacity: 8 l Min/max heating temperature (high temperature range) °C 35/82 Min/max heating temperature (low temperature range) °C 25/45 DHW temperature min/max °C 36/60 Instantaneous quantity of hot water ΔT=25°C l/m 13.9 Instantaneous quantity of hot water ΔT=35°C l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 34 Electrical protection degree IP X5D CX GREEN EU   The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less