The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 35 CS/1-5 Article code : 0010022024 Power supply: methane or LPG Performance Heating power : 4.0 ~ 34.1 kW DHW power : 4.0 ~ 34.1 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 105.2% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER NB The boiler will be supplied with methane. For operation with LPG or propane air, contact the local authorized assistance center in advance. Technical features Model : LUNA STYLE 35 Code: A7754006 Heating nominal heat input: 28.9 kW DHW nominal heat input: 34.9 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A Sanitary Energy Efficiency Class: A Withdrawal profile: XL Seasonal space heating energy efficiency ŋs: 94/98 % Water heating energy efficiency ŋwh: 88.1% Useful efficiency at 30% thermal power. name and low temperature regime. **ŋ1: 99.0 Useful efficiency (pci) at 30% - return temperature 30°C: 109.9% Useful efficiency (pci) intermediate - average temperature 70°C: 98.4% Dimensions and weight Dimensions (hxwxd): 763x450x334 mm Net weight: 32kg Description 98% energy efficiency thanks to the advanced technology applied Backlit color control panel, icons for parameter display, clear descriptions via large text display, adjustment knob and menu selection keys Wide modulation range 1:10 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Power set: heating power adjustment according to project data Hydraulic group in brass Connection to pressurized collective flues Natural gas boilers convertible to LPG and propane air (conversion kit not required) Antifreeze function and IPX5D degree of protection Operation with a mixture composed of up to 20% hydrogen Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

URBIA ADVANCE LINK 30 kW Chaffoteaux condensing boiler free flue kit with 4 liter micro-accumulator Integrated Wi-Fi - ErP new Reference 3310610 MET/LPG/AP gas Energy class in heating A Energy class in sanitary A XL withdrawal profile Weight 42kg Dimensions (Height x Width x Depth) 745 x 440 x 460 mm ENERGY PERFORMANCE Nominal heat input in heating max/min (Hi) Qn 28 / 3.0 kW Nominal heat input in heating max/min (Hs) Qn 31.1 / 3.3 kW Max/min DHW nominal heat input (Hi) Qn 30.0 / 3.0 kW Max/min DHW nominal heat input (Hs) Qn 33.3 / 3.3 kW Heating output max/min (80°C-60°C) Pn 27,3 / 2,8 kW Heating output max/min (50°C-30°C) Pn 29,7 / 3,1 kW DHW max/min useful power Pn 28.8 / 2.9 kW Efficiency at 30% of Qn with return to 30°C Hi/Hs 106.1 / 95.6% Performance stars (dir. 92/42/EEC) **** SANITARY CIRCUIT Min/max DHW temperature 40 / 65 °C Instantaneous quantity of hot water ?T=25°C 18.1 l/min Sanitary comfort stars (EN13203) *** ELECTRICAL DATA Power supply voltage/frequency 230 / 50 V Total absorbed electrical power 98.1 W Degree of protection of the electrical system IP X5D URBIA ADVANCE LINK Urbia Advance Link represents the perfect mix between sanitary comfort and reduced consumption. It stands out for its 4-litre micro-accumulator, electronic combustion control and integrated Chaffolink connectivity and standard Expert Control. MAXIMUM PERFORMANCE: SPINTECH New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Chaffolink connectivity integrated in the boiler. External temperature from the internet thanks to integrated connectivity. HEALTHCARE COMFORT Integrated mini-accumulator in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate from 16.0 to 20.1 l/min with ?T = 25ºC. DHW production controlled by a modulating pump to respond to needs without waiting times and at a constant temperature, even when withdrawals are very small. DHW programmer to control the storage heating time slots. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL KON M C35 CONDENSING + FUME KIT - ErP KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 35 CS/1-5 CFI Article code : 0010022025 Power supply: methane or LPG Performance Heating power : 4.0 ~ 34.1 kW DHW power : 4.0 ~ 34.1 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 105.2% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water boiler. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

PIGMA ADVANCE 35 kW EU Chaffoteaux condensing boiler complete with flue kit Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 31/3.5 kW Useful power (min./max.): 34.4/3.9 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 91.1 / 82% Max/min useful heating power (80°C-60°C): 27.4/3.9 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 16.7 l/min Instantaneous quantity of hot water ∆T=25°C: 20.4 l/min Instantaneous quantity of hot water ∆T=35°C: 14.5 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Characteristics Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 80 W Power supply: METHANE (G20/G30) Dimensions (HxWxD): 745x400x385mm; Weight: 29.7kg PIGMA ADVANCE Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED OPERATION ALSO ON LPG USING THE SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED SERVICE CENTER OF THE AREA Ferroli Floorstanding Boiler Bluehelix B 35 kW Methane or LPG complete with Fume Exhaust Kit - New ErP ERP Class (Class G - A++) A Thermal input (PCI) Min / Max Heating kW 6,7 / 32,0 Thermal power 80°C-60°C Min / Max Heating kW 6,6 / 31,4 Thermal power 50°C-30°C Min / Max Heating kW 7,2 / 34,0 Emission class Nox class 6 Dimensions HxWxD 850x400x595 BLUEHELIX B on base > STRONG POINTS: It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% (mod. 35 only) in combination with the modulating remote control and the external probe (optional) it reaches the higher efficiency class A+ (scale from G to A+++) (mod. 35 only) Primary heat exchanger in stainless steel Total premix burner in stainless steel with wide modulation range Low consumption modulating heating pump (Erp Ready - Class A) Digital controls with user interface display, multifunctional for easy and correct parameter setting Can be combined with the modulating remote timer control Easily accessible water and gas connections to facilitate the replacement of old generators Fumes discharge with split or coaxial pipes; possibility of left and right side exit, rear > BENEFITS OF BLUEHELIX B: Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation in combination with the optional external probe Protection function of the exchanger with Δt control Timed circulator anti-blocking Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only in methane operation) Antifreeze function with standard protection down to -5°C Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Chaffoteaux Condensing Boiler mod. NIAGARA ADVANCE 25 C low NOx Complete with CNG exhaust kit 3310626 Code: 3310626 Power 25 kW Energy class in heating A Energy class in sanitary A XL withdrawal profile Dimensions HxWxD 900 x 600 x 460 mm Technical data Nominal heat input in heating max/min (Hs) Qn 22/2.5 kW kW Max/min DHW nominal heat input (Hs) Qn 26.0/2.5 kW kW Efficiency at nominal heat input (60/80°C) Hi/Hs 97.7/87.9% % Performance stars (dir. 92/42/EEC) **** NOx class 6 Expansion tank capacity 8l Power supply voltage/frequency 230 / 50 V/Hz Degree of protection of the electrical system IP X5D NIAGARA ADVANCE Niagara Advance , a concentrate of performance, comfort and compactness, combines the technology of the new Advance range with two 20-litre boilers to meet the most demanding domestic hot water needs. MAXIMUM PERFORMANCE New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Optimized internal silencer. SRA function. Gas transformation with kit included as standard. Ready for Chaffolink connectivity. HEALTHCARE COMFORT 40 liter reserve thanks to two stratified stainless steel inter-accumulators. Permanent availability of domestic hot water even with discharged inter-tanks. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate up to 19.8 l/min with ΔT = 25ºC. Integrated 2-litre sanitary expansion tank. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 20% energy savings in combination with Expert Control and the SRA function. Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

RINNAI condensing boiler ZEN 34 kW Low NOx Integrated Wi-Fi Integrated Condensate Neutraliser cod. REB-KBI3535FF-LPG LPG Complete with Smoke Kit Code REB-KBI3535FF-NG Heating energy efficiency class A Profile / Domestic hot water energy class XL / A Noise level indoors (dB) 43 Performance Nominal heat input on PCI Heating (kW) 34.9 Qnw Nominal heat input on Sanitary PCI (kW) 34.9 NOx class 6 Maximum electric power absorbed in heating (W) 95 Degree of protection IPX5D Expansion vessel content (l) 9 Domestic hot water delivery (∆T=35°C) (l/min) 14.0 Dimensions Dimensions (W x H x D) (mm) - Empty weight (kg) 440x660x335 - 37 ZEN Instantaneous gas condensing heat generator for heating and domestic hot water production, complete with standard Wi-Fi chronothermostat with adjustment and self-diagnosis function. Standard Wi-Fi chronothermostat. Daily and weekly scheduling, consumption reports, change settings anywhere and anytime. Characteristics: Low NOx metal fiber burner Exchanger in stainless steel Integrated condensate neutraliser Standard antifreeze down to -20°C IPX5D protection Outdoor Earthquake sensor* (For greater safety, in the event of medium or high intensity seismic events, the sensor isolates the boiler from the gas system.) Integrated climatic probe Eco-sustainable condensation Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Ferroli condensing boiler Bluehelix HiTech RRT 34 H complete with low NOx methane or LPG fume exhaust kit for heating only - New Heating ERP Class A Heating capacity max / min kW 34.7 / 3.5 Efficiency 30% % 109.5 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 8 litres Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT H (Heating Only)   The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the external temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Designed to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Hydraulic connections covered by the boiler shell Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger group. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE TRANSFORMATION KIT WILL BE SUPPLIED AS STANDARD. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Ariston Condensing Boiler CLAS B ONE 35 Methane or LPG 40 lt storage complete with flue gas exhaust kit code 3301212 Product code: 3301212 Energy label specifications according to European ErP directive Heating energy efficiency Class A Energy efficiency sanitary XXL profile Class A Heating/sanitary operation features: Nominal heat input max/min (heating) PCI: 31-5.0 kW Nominal heat output max/min (sanitary) PCI: 34.5-5.0 kW Max/min useful thermal power (heating):30.2-4.7 kW Efficiency at nominal heat output (60/80°C) PCI: 97.3% Efficiency at nominal heat output (30/50°C) PCI: 106.5% Efficiency at 30% (30° C) PCI: 109.3% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C Max/min sanitary temperature: 65-40°C Quantity of hot water (deltaT 25°C): 26.5 l/min Quantity of hot water (deltaT 35°C): 18.9 l/min Specific flow rate (first 10' with deltaT 30°C): 22.1 l/min Minimum operating temperature > 0°C Modulation ratio 1:7 Power supply voltage/frequency V/Hz 230-50 Total absorbed electrical power: 84W Electrical system protection degree IP X5D Dimensions 24 kW mm (HxWxD) 900 x 600 x 474 Power supply: Methane or LPG LPG conversion kit as standard Functionality: XtraTech™ stainless steel primary exchanger AUTO, Comfort functions Internal Installation CLASS B ONE Ariston exclusive XtraTech™ stainless steel exchanger, with high prevalence Exchanger passage sections +142% compared to the previous version LCD display 2 x 20 litre stainless steel stratification boilers Class A+ in heating achievable with thermoregulation Modulation ratio 1:7 BusBridgeNet® communication protocol Optimized boiler heating logic AUTO and Comfort function Prepared for sanitary recirculation Flue pipe 80, 60, 50 mm Comfort Function Speeds up the delivery of hot water in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last dispensing). Auto Function Maximum comfort, efficiency and energy savings based on automatic analysis of environmental conditions, connected external devices and required performance. System Management New communication protocol designed to ensure complete system management. Super silence Silence in all operating modes. High efficiency Product characterised by high energy performance, reduced consumption and polluting emissions. Made in Italy Produced entirely in Italy. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits. For information, contact the authorized service center in your area in advance Ferroli Bluehelix Alpha 34C condensing boiler complete with flue gas exhaust kit Methane or LPG code 0TPF7AWA Energy label specifications according to European ErP directive Heating energy efficiency Class A Energy efficiency of sanitary equipment XL profile Class A Heating/sanitary operation features: Max / min heating heat output (Hs) kW 34.1 / 5.5 Maximum sanitary heat output (Hi) kW 34.8 Max. heating operating pressure bar 3 Min. heating operating pressure bar 0.8 Heating expansion vessel capacity 10 litres Maximum sanitary operating pressure bar 9 Minimum sanitary operating pressure bar 0.3 Sanitary flow rate ∆t 25°C l/min 19.5 Degree of protection (IEC 60529) IP IPX4D Power supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 Bluehelix Alpha .. More beautiful than "BEFORE" The new range of generators is equipped with the proven stainless steel exchanger . Designed and built according to the new ErP directives for eco-friendly design and labelling, BLUEHELIX ALPHA is at the top of its category. TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) mod. 24 C COMBINATED (14 l/min at ∆t 25°C) The BLUEHELIX ALPHA thermal group exchanger (fig. A) compared to the more classic and widespread steel exchanger. This geometry allows the exchanger to operate almost at maximum design efficiency even in conditions of partial clogging, while with the same quantity of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig. B tends to clog much more quickly in the part in contact with the flame due to the reduced fluid passage area, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency below the nominal values BLUEHELIX ALPHA VIEW FROM INSIDE EXCHANGER Single-circuit stainless steel exchanger with high passages, resistant to clogging and easy to clean STEEL FRAME Made with high precision automated processes EXPANSION VESSEL 8 litre expansion vessel placed laterally ELECTRIC PANEL FAN Offset fan, to facilitate maintenance of the primary exchanger without disassembly DOMESTIC HOT WATER EXCHANGER In stainless steel, with copper brazing High efficiency CIRCULATOR, for heating and exchange with the sanitary circuit SEALED CHAMBER Removable steel panel protecting the combustion chamber with sealed chamber function ELECTRICAL PANEL Large removable electrical panel protects against water damage that may occur during normal maintenance. Easy access to electrical connectors. THE ENGINE The tube that makes up the BLUEHELIX ALPHA exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to scaling agents and deposits. BOILER CONTROL The BLUEHELIX ALPHA control unit consists of an easy-to-use interface with a backlit display. Using the buttons, you can easily adjust the heating flow temperature, the domestic hot water setpoint, turn the generator on/off or activate the comfort function, monitoring the boiler status. The control panel is completed by a traditional pressure gauge that can check the system pressure at any time. MC2 The electronics controls the flame ionization current to ensure optimal combustion when the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air/gas ratio itself and therefore combustion. MC2: Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use when the conditions of the gas network vary (e.g. fluctuations or reduced pressures). MGR Methane, LPG, Propane Air Ready The electronics controls the flame ionization current to ensure optimal combustion when the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air/gas ratio itself and therefore combustion. MC2: Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use when the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Thanks to the new electronics supplied, the gas change operation is extremely simple. The MC2 combustion control constantly monitors the quality of combustion and by simply modifying a parameter of the electronic board (operation to be carried out only by qualified personnel) it is possible to operate the boiler on Methane or LPG or Propane Air. It is therefore not necessary to purchase additional accessory kits. CONNECT New wireless remote control available as an accessory for managing home comfort also from a smartphone using the connect app (iOS and Android). Maximizes room comfort with modulation of the flow temperature through the Ambient Climate Compensation (CCA) and External Climate Compensation (CCE) functions via external temperature detectable directly from the internet (or from an optional external probe). Improves the average seasonal efficiency in space heating by +4%. EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can realize the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the BLUEHELIX ALPHA thermal group allows maintenance to be performed with maximum precision and speed. Some examples: - The electrical box of the electronic board can be easily extracted from the chassis leaving free access to the internal parts. - Easy access to the burner group by removing 4 screws and the quick coupling (clip) of the fan. - The extra-large passage exchanger is designed to challenge the hardest waters and is easily cleanable thanks to the single-tube, non-collector circuit. - The domestic water inlet filter can be removed very easily directly from the inside without having to remove the boiler's hydraulic connections. - The possible dismantling and replacement of the plate exchanger is done simply by removing two Allen bolts accessible from the front SUN EASY FUNCTION BLUEHELIX ALPHA has been designed to be easily inserted into systems created with the latest technologies. The SUN EASY system uses electronics that simplify the combination with both natural and forced circulation solar panels. Using a sensor placed on the sanitary circuit, it continuously monitors the temperature of the water preheated by the solar panels, providing for the ignition of the burner only in the event that the latter falls below the level necessary to guarantee optimal comfort for the user. STOP AND GO FUNCTION When using sanitary mixer taps, short or very short deliveries for quick rinses cause the boiler ignition procedure to start, which usually ends immediately. The persistence of these "false starts" can, in the long run, compromise the average life of the product. For this reason, BLUEHELIX ALPHA provides an electronics parameter through which it is possible to delay the ignition of the burner (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water. EXTERNAL INSTALLATION - ANTIFREEZE FUNCTION To make the most of the available space, the new BLUEHELIX ALPHA 24 - 28 C boiler can be installed flush with the wall using the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the “painted cabinet” kit is also available. If the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. ECO-COMFORT HEALTHCARE FUNCTION In ECO mode, domestic hot water production occurs according to traditional standards, allowing energy savings during periods of non-use. In COMFORT mode, thanks to the special system for maintaining the temperature of the heat exchanger, the supply of domestic hot water becomes even faster and more comfortable. The efficiency and load profiles according to the ErP directive are at the top of the category: mod. 24 C / A - XL. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less