ATTENTION THE BOILER CAN OPERATE WITH METHANE. LPG AND PROPANE AIR WITHOUT THE USE OF ADDITIONAL CONVERSION KITS. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ferroli Bluehelix Maxima 28C condensing boiler complete with Wi-Fi flue gas exhaust kit Optional Class A Methane or LPG - NEW 0TSB4MWA Energy label specifications according to the European ErP directive Heating energy efficiency Class A+ (in combination with the connect command) Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Max heating heat input (Hs) kW 24.5 Max DHW heat input (Hi) kW 28.5 Yield 30% % 109.7 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 8 litres Sanitary flow rate ∆t 25°C l/min 16.1 IP X4D protection degree Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 Methane or LPG MGR: Methane, LPG, Propane air Ready. The boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Bluehelix Maxima - Functionality at its maximum expression The exclusive lines of BLUEHELIX MAXIMA radically innovate the aesthetic concept proposed so far through the use of crystal and the revolutionary use of curved shapes. A multicolored LED environment , set in a central position, allows you to perceive the status and operating modes of the boiler even on a visual chromatic level. The large 7'' full color touch screen display integrated in the front surface of black tempered glass allows the user to interact in a totally smart way with the product thanks also to the combination with the smart CONNECT remote control manageable from iOS and Android apps . Conceived to fully satisfy the requests for a "robust" product from every point of view: primary heat exchanger with high passages, secondary domestic heat exchanger enhanced with 20 plates, high head circulator, new control electronics. All these elements are designed to ensure maximum efficiency and reliability over time also, and not only, to replace old generators in particularly dirty systems: ideal for "carefree" replacement MAXIMUM SILENCE: ONLY 45 dB The particularly careful design of BLUEHELIX MAXIMA has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers MAXIMUM INNOVATION Developing sustainable and low environmental impact solutions capable of combating global warming is now a reality! BLUEHELIX MAXIMA is already capable of autonomously self-regulating (plug-in) and functioning correctly in total safety with mixtures of natural gas enriched with hydrogen already foreseen for distribution in Europe (*) THE BOILER CONTROL The innovative control and management electronics of BLUEHELIX MAXIMA is at the top levels of the category. The large 7'' full touch screen color graphic display allows real-time viewing of operating information thanks to simple and intuitive graphic screens. With a simple touch it is possible to set the temperature set points for heating and domestic hot water. Thanks to the contextual help, BLUEHELIX MAXIMA directly informs the user of the possible causes of the anomaly while providing the qualified technician with indications on possible solutions to undertake. Even the system pressure is no longer a problem because thanks to the semi-automatic system electroloading function, a simple ''touch'' is enough and the boiler automatically restores the adequate pressure without requiring manual intervention by the user. CONNECT The remote control Remote control supplied with the class A+ kit code for home comfort management also from Smartphone (*) Connection to the home WiFi network for internet access via the supplied RF/WiFi receiver CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the flow temperature using the functions Environmental Climatic Compensation (CCA) and Compensation External Climatic (CCE) via external temperature detectable directly from the internet (or from an optional external probe) It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30-minute intervals via APP CONNECT Alarm display also via APP CONNECT Operating modes: Off, Holiday, Automatic, Manual Three modifiable temperature levels: Comfort, Economy, Antifreeze TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) The geometry of the BLUEHELIX MAXIMA THERMOBALANCE™ thermal unit exchanger (figure A) allows operation at almost maximum design efficiency even in conditions of partial clogging, while with the same amount of deposits and sediments (e.g. due to the installation action on old systems) the traditional exchanger in figure B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits* is formed which hinder the heat exchange and reduce the efficiency below the nominal values. THE ENHANCED HYDRAULIC UNIT All models in the BLUEHELIX MAXIMA series are equipped with a 20-plate DHW plate heat exchanger and a 7.5 mWC head boosted heating circulator The considerable increase in the passage section of the 20-plate exchanger compared to a traditional one (e.g. with 14 plates) greatly reduces clogging over time, even in the presence of particularly hard water, greatly increasing its average life and reducing maintenance costs to a minimum. The enhanced system circulation pump with a head of 7.5 meters allows all BLUEHELIX MAXIMA models to function correctly, delivering all the necessary power even in systems with high pressure drops (particularly large new systems or old systems with ). MC2 : MULTI COMBUSTION CONTROL The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2: Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Furthermore, the new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34C model. In this way BLUEHELIX MAXIMA is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off operations which increase operating costs and reduce the average life of the product. CHARACTERISTICS Aesthetics with exclusive lines (Patent) that radically innovate the design concept through the use of tempered glass and curved shapes Wide range of optional accessories: CONNECT wi-fi remote control kit manageable via App, hydraulic connection kits (5 pipes, 4 taps), connection cover Boiler with thick stainless steel primary exchanger, with increased passages to guarantee durability and reduced maintenance Enhanced modulating heating circulator with high head on all models able to adapt even to particularly resistant systems Semi-automatic system electroloading as standard Enhanced domestic hot water exchanger with a high number of plates particularly immune to blockages and capable of maintaining the domestic hot water production capacity constant over time thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology for better adaptability of use to varying gas network conditions 7 inch color graphic touch screen display Immediate display of the operating status thanks to the front multicolor LED Particularly suitable for operation in flues that require "heavy" ducting, thanks to operation with 50 mm diameter smoke outlets Designed to simplify and facilitate normal maintenance and cleaning operations thanks to easy access to internal components Simplified electrical wiring that does not require removal of the boiler shell thanks to direct access to the external connection terminal block available on the bottom of the product Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Fondital ITACA KC 28 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - LPG Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 26.4 kW Rated heat output: 27.9 kW Efficiency at maximum power: 96.4% Efficiency at 30% load: 107.0% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 15.5 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion tank capacity: 10 l Consumption in heating at nominal power Natural gas m3 /h 2.79 DHW consumption at nominal power Natural gas m3 /h 3.22 Total absorbed electrical power: 91 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 39kg LPG power supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with room temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion tank Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE JUNKERS BOSCH CERAPUR BUILT-IN CONDENSING BOILER ZWB 28-1 EI 24 kW INCLUDING FUME KIT - NEW ErP ErP energy class (Heating and DHW) For heating and domestic hot water production DHW nominal heat input kW 28 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat input (sanitary): 7.4 kW Sanitary flow rate ΔT = 30 K: 13.4 l/min NOx class: 5 Voltage v(AC): 230 HZ frequency: 50 Absorbed electric power: 230 W IP Protection Degree: X5D Dimensions: 243 x 533 x 775; 47 kgs Standard: Controllable from home - Management of the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. CerapurRecessed CERAPUR INCASSO is designed for concealed installations and encloses maximum comfort in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. In fact, CERAPUR INCASSO integrates perfectly into the façade thanks also to the possibility of painting the "shell" with the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in the niche in the wall Controllable from inside the house - Management of the boiler directly from inside the house, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the aluminum alloy construction of the primary exchanger Electrical insulation - The boiler has an IPX5D degree of electrical insulation Characteristics: Wall-mounted condensing boilers for outdoor use with DHW production that can be combined with solar thermal systems for DHW using the Solar Kit. C13, C33, C63, C83, B33 type certifications obtained. Suitable for use with Ø 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a special niche, dedicated to the built-in Guscio (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the DHW and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW and heating). Patented high efficiency silicon-aluminum alloy primary heat exchanger. Oversized sanitary plate heat exchanger for condensing also in DHW. Heating side expansion vessel of 6 litres. Circulator in Energy Class A. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE BAXI AREA ASSISTANCE IN ADVANCE Baxi Luna Duo-tec E 28 Low NOx condensing boiler complete with standard Baxi maGO LPG flue exhaust kit Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input 28.9 kW Nominal heating flow rate 24.7 kW Sanitary nominal thermal power 28 kW Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -5°C Expansion vessel capacity 8 Degree of protection IPX5D Dimensions (hxwxd) mm 763 x 450 x 345 Power supply: LPG Luna Duo-tec General characteristics New modern and elegant design for the whole range Wide modulation range up to 1:7 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - for mod. 24 kW total length 40 meters (intake + exhaust) hydraulic system Electric three-way diverter valve (also heating only models) Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense as well in sanitary operation Modulating fan with electronic variation of speed Automatic by-pass High efficiency circulation pump full modulation Pump anti-blocking system and three-way valve which occurs every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Standard climate control (with external probe optionally available) Preparation for connection to a zone system Control system safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch that blocks the gas in case of lack of water NTC safety probe against smoke overtemperatures Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

NB THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Riello Open Chamber boiler mod. START 28 KI LN Low NOx LPG - NEW ErP 20151435 Product code: 20151435 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Thermal input: 31.90 kW Thermal power (80-60°C): 28.87 kW Reduced heat input: 14.00 kW Reduced thermal power (80-60°C): 12.36 kW Thermal input: 31.90 kW Reduced heat input: 9.00 kW Reduced thermal power: 7.95 kW Minimum operating pressure: 0.25-0.45 bar Quantity of hot water with Δt 25°C: 16.6 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37-60°C Flow regulator: 10 l/min NOx class: 6 Dimensions HxWxD 450x332x740 mm; Weight: 30 Kg Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

UNICAL KON M C28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power in condensing 28.9 Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C) 15.8 kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) : 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Domestic hot water specific flow rate (Dt 30 °C) ''D'' 13.0 DHW production in cont. Dt 25 K (mixed) -/15.5 IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345 mm; 36.5kg KONm KONm the latest generation of domestic condensing boilers by Unical, available in the version: combined instantaneous heating only that can be combined with the DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION, THE BOILER CAN BE ADJUSTED FOR LPG OPERATION. CONTACT YOUR LOCAL AUTHORISED SERVICE CENTRE Technical features Model : Condens GC7000iW 28 BC Product code : 7736901597 Color : Black Power supply: Methane/LPG Energy efficiency Energy efficiency class in ACS: A Energy efficiency class in heating: A Load profile: XL Performance Nominal thermal power: 24.0 kW Nominal heat output: 24.6 kW Nominal thermal power for domestic hot water: 28.0 Kw Seasonal space heating energy efficiency: 93.0 ηs % Seasonal DHW energy efficiency: 83.0 ηs % Sound power level: 50 dB(A) Class : NOx 6 Dimensions and weight Dimensions (DxWxH): 350x440x840 mm Weight: 43.0 Kg CONDENS 7000i W Design and innovation love at first sight. Ask for the best, she will give it to you. Aesthetics, innovation and savings. The new Condens 7000i W gas condensing wall-mounted boiler has a refined and exclusive design, with a white or black titanium tempered glass casing, and a heart full of technological innovations. Simple to use, it guarantees high savings and reduced consumption. Condens 7000i W is available in several versions to meet all your heating and hot water needs: heating-only version with 14 and 24 kW power, and combined version to also produce domestic hot water with 24, 28 and 35 kW power. Designed to offer you excellence Whether you want to modernise your heating system or you are looking for a boiler for your new home, the advantages of Condens 7000i W are a guarantee: by choosing this boiler you ensure only the best from every point of view. Consumption only according to your needs Condens 7000i W automatically adjusts power and consumption to your actual needs for domestic comfort and hot water, reducing waste. Furthermore, the condensation technique allows you to exploit the heat of the exhaust gases, increasing the efficiency of the boiler. Control your system via the dedicated App Condens 7000i W is perfectly compatible, in the case of single-zone heating systems, with the Bosch CT100 digital thermostat. This refined and elegant thermostat allows you to adjust the heating based on your presence at home and allows you, thanks to the Bosch Control app, to control your boiler wherever you are and at any time. For you only the best The quality is Bosch Thanks to the use of top-quality components, such as the aluminum-silicon alloy heat exchanger designed, patented, built and guaranteed by Bosch, the long-term reliability of this boiler is a certainty you can always count on. Black or white A question of style Choosing it is a real pleasure Condens 7000i W is the perfect choice for those seeking beauty and innovation. The refined and attractive design, with a titanium tempered glass casing with rounded corners, available in white or black, is ideal for adapting to all domestic environments, even the most modern and sophisticated. This innovative material gives numerous advantages to your boiler: it is robust, unbreakable, easy to clean and does not show signs of aging. Thanks to its elegant and refined look, the boiler transforms into a real piece of furniture. Unique on the outside, perfect on the inside Innovative technology... not just aesthetics! Condens 7000i W is designed to simplify installation and maintenance operations to the utmost by specialized technical personnel. Once opened, Condens 7000i W will never cease to amaze you. Quick and easy installation Condens 7000i W includes a pre-installation plate as an accessory to facilitate assembly; it is also compatible with the connections of previous Junkers Bosch wall-mounted boiler models, so you can use existing hydraulic and gas connections and save time. Quick and easy maintenance The internal design of the Condens 7000i W allows easy access to all components, which are clearly recognisable at first glance. The industrial design of this boiler means that it is assembled in a modular and orderly manner, ensuring speed and precision in maintenance operations. 360-degree reliability Bosch carefully selects all components, focusing on quality. The electronics are developed by Bosch; the heart of the boiler, the aluminum-silicon alloy exchanger, is also developed, produced, certified and guaranteed directly by Bosch. The aluminum-silicon alloy resists temperature fluctuations, giving the exchanger qualities of lightness, strength, efficiency and silence. Adapts to every need The wide continuous modulation of the power of Condens 7000i W, with a range of up to 1:8, will satisfy all comfort and consumption needs. The wide modulation is allowed by the Venturi tube, an innovation that makes the boiler highly efficient. Furthermore, the choice between LPG and methane is simplified to minimize setting operations. Intuitive and fast programming The Condens 7000i W display, circular and backlit, allows for fast and intuitive programming thanks to the easily understandable menu. In addition, the integrated climate control further simplifies the commissioning of the boiler. Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

Caratteristiche tecniche Modello : InoxDens 28S Codice prodotto : 10303.1010.0 Alimentazione : Gpl Efficienza energetica Classe di efficienza energetica riscaldamento : A Classe di efficienza energetica sanitario : A Profilo di prelievo : XL Performance Portata termica nominale riscaldamento : 25,0 kW Portata termica nominale sanitario : 29,0 kW Potenza utile massima riscaldamento 60°/80°C : 24,5 kW Potenza utile massima sanitario 60°/80°C : 28,4 kW Potenza utile massima riscaldamento 30°/50°C : 26,9 kW Potenza utile massima sanitario 30°/50°C : 31,1 kW Rendimento nominale 60°/80°C : 98,0% Rendimento nominale 30°/50°C : 107,4% Classe NOx : 6 NOx ponderato : 28 mg/kWh Temperatura minima e massima riscaldamento : 25° ~ 85°C Pressione minima e massima riscaldamento : 0,3 ~ 3 bar Capacità del vaso espansione : 7,0 litri Temperatura minima e massima sanitario : 30° ~ 60°C Portata massima (ΔT=25 K) : 16,5 l/min Portata massima (ΔT=35 K) : 11,5 l/min Portata sanitari specifica (ΔT=30 K) : 13,8 l/min Alimentazione (V,Hz, Ø) : 220~240/50/1 Grado di protezione : IPX5D Dimensioni e peso Dimensioni (AxLxP) 700x400x300 mm Peso : 31,3 Kg Caldaia a condensazione premiscelata Savio InoxDens S InoxDens completa la gamma SAVIO a condensazione premiscelata: perfetta per impianti a radiatori e idonea con sistemi radianti con gruppi di miscelazione. InoxDens è la caldaia a condensazione compatta che assicura alti rendimenti, bassi consumi e rispetto per l’ambiente. Disponibile per riscaldamento e produzione di acqua calda sanitaria, nelle potenze 24, 28 e 32 kW. Scambiatore primario condensante in acciaio INOX con rivestimento in acciaio per offrire la massima resistenza alla corrosione Bruciatore a premiscelazione totale, acciaio INOX (Classe NOx 6) Modulazione 1:5 Metano e anche GPL Scambiatore sanitario a piastre in acciaio INOX Vaso di espansione da 7 litri Pompa ad alta efficienza con basso consumo energetico Integrazione a sistemi solari Savio, mediante kit solare Lettura digitale nel display della pressione Predisposizione per comando remoto e sonda esterna Gruppo idraulico compatto in ottone. Gruppo di mandata con deviatrice motorizzata, by-pass e rubinetto di carico impianto integrati.Circolatore ERP con sblocco pompa manuale su gruppo di ritorno. Funzionalità del pannello comandi Selettore estate/inverno/off Regolatore temperatura riscaldamento Regolatore temperatura sanitario Lettura digitale della pressione Visualizzazione temperatura sanitaria e riscaldamento da display Visualizzazione diagnostica guasti, stato di blocco e storico guasti Il display opera secondo le modalità: Informazioni disponibili sullo stato di funzionamento e storico errori Parametri programmabili per adeguamento generatore/impianto e SET Utente Parametri generatore Parametri Centri Assistenza Autorizzati Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Overview GAS BOILER JUNKERS BOSCH mod. CONDENS 7000i GC7000iW 28 kW METHANE CONDENSING + FLUE KIT - WHITE - ErP Technical specifications For heating and domestic hot water production Heat and DHW energy efficiency class (ErP) Seasonal space heating energy efficiency ns % 93 Useful efficiency (Hi - 50/30 °C) % 100 Modulation range 1:8 Nox class 6 Net weight) kg 43 Dimensions (L x W x H) mm 350x440x840 SMOKE EXHAUST KIT INCLUDED IN THE PRICE! By Regional Resolution, only boilers with the NOx 6 characteristic can be installed in the Lombardy and Piedmont regions Main features CONDENS 7000i W Design and innovation love at first sight. Ask her for the best, she will give it to you. Aesthetics, innovation and savings. The new Condens 7000i W wall-hung gas condensing boiler has a refined and exclusive design, with a black or white titanium tempered glass shell, and a heart full of technological innovations. Simple to use, it guarantees you high savings and low consumption. Condens 7000i W is available in several versions to satisfy all your heating and hot water needs: heating only version (with power of 14 and 24 kW) and combined version to also produce domestic hot water (with power of 24, 28 and 35 kW). Designed to offer you excellence Whether you want to modernize your heating system or you are looking for a boiler for your new home, the advantages of Condens 7000i W are a guarantee: by choosing this boiler you can ensure only the best under every point of view. Consumption only according to your needs Condens 7000i W automatically adjusts power and consumption to your real domestic comfort and hot water needs, reducing waste. Furthermore, the condensing technique makes it possible to exploit the heat of the exhaust gases, increasing the efficiency of the boiler. Control your system via the dedicated App Condens 7000i W is perfectly compatible, in the case of single-zone heating systems, with the Bosch CT100 digital thermostat. This refined and elegant thermostat allows you to adjust the heating based on your presence in the house and allows you, thanks to the Bosch Control app*, to control your boiler wherever you are and at any time. Only the best for you: quality is Bosch Thanks to the use of top quality components, such as the aluminum-silicon alloy heat exchanger designed, patented, built and guaranteed by Bosch, the reliability of this boiler over time is a certainty you can always count on. White or Black: a question of style Choosing it is a real pleasure Condens 7000i W is the optimal choice for those looking for beauty and innovation. The refined and captivating design, with titanium tempered glass casing with rounded corners, available in the white or black version, is ideal for adapting to all domestic environments, even the most modern and sophisticated. This innovative material gives your boiler many advantages: it is robust, unbreakable, easy to clean and does not show signs of ageing. Thanks to the elegant and refined look, the boiler is transformed into a real piece of furniture. Condens 7000i W is designed to simplify installation and maintenance operations by specialized technical personnel as much as possible. Once opened, Condens 7000i W will never cease to amaze you. Quick and easy installation Condens 7000i W includes the pre-installation plate as an accessory to facilitate assembly; it is also compatible with the connections of the previous models of Junkers Bosch wall boilers, so as to be able to use the existing water and gas connections and save time. Quick and easy maintenance The internal design of the Condens 7000i W allows easy access to all components, which are clearly recognizable at first glance. The industrial design of this boiler means that it is assembled in a modular and orderly manner, guaranteeing speed and precision in maintenance operations. All-round reliability Bosch carefully selects all components, focusing on quality. The electronics are developed by Bosch; the heart of the boiler, the aluminum-silicon alloy exchanger, is also developed, produced, certified and guaranteed directly by Bosch. The aluminum-silicon alloy resists temperature swings, giving the exchanger qualities of lightness, sturdiness, efficiency and silence. It adapts to every need The wide continuous modulation of the power of Condens 7000i W, with a range up to 1:8, will make it possible to satisfy all comfort and consumption needs. The wide modulation is allowed by the Venturi tube, an innovation that makes the boiler highly efficient. Furthermore, the choice between LPG and methane is simplified to minimize setting operations. Intuitive and fast programming The circular and backlit display of Condens 7000i W allows fast and intuitive programming thanks to the easily understandable menu. Furthermore, the integrated climatic thermoregulation further simplifies the commissioning of the boiler. The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: o the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances or the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

 ATTENZIONE  LA CALDAIA È IN GRADO DI FUNZIONARE A METANO. GPL E ARIA PROPANATA SENZA L'UTILIZZO DI KIT DI CONVERSIONE AGGIUNTIVI. PER INFO, CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA AUTORIZZATO DI ZONA Caldaia Ferroli Bluehelix Maxima 28C a condensazione completa di kit scarico fumi Wi-Fi Optional Classe A Metano o Gpl - NOVITA' 0TSB4MWASpecifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica riscaldamento Classe A+ (in abbinamento al comando connect) Efficienza energetica sanitario profilo XL Classe A Caratteristiche esercizio riscaldamento/sanitario: Portata termica max riscaldamento (Hs) kW 24,5 Portata termica max sanitario (Hi) kW 28,5 Rendimento 30% % 109,7 Classe di emissione NOx (EN 15502-1) - 6 Capacità vaso di espansione riscaldamento litri 8 Portata sanitaria ∆t 25°C l/min 16,1 Grado protezione IP X4D Tensione di alimentazione V/Hz 230V / 50Hz Dimensioni AxLxP mm 700x420x320 Metano o Gpl M.G.R: Metano, Gpl, Aria propanata Ready. La caldaia è in grado di funzionare a metano, gpl ed aria propanata senza l’utilizzo di kit di conversione aggiuntivi Bluehelix Maxima - Funzionalità alla maxima espressioneLe linee esclusive di BLUEHELIX MAXIMA innovano radicalmente il concept estetico finora proposto attraverso l’impiego del cristallo e l’uso rivoluzionario delle forme curve. Un ambiente LED multicolore, incastonato in posizione centrale, permette di percepire anche a livello cromatico visivo lo stato e le modalità di funzionamento della caldaia. L’ampio display full touch screen a colori da 7’’ integrato nella superfice frontale di vetro nero temperato consente all’utente di interagire in modo totalmente smart con il prodotto grazie anche all’abbinamento col comando remoto smart CONNECT gestibile da app iOS e Android. Concepita per soddisfare a pieno le richieste di un prodotto «robusto» sotto ogni punto di vista: scambiatore termico primario a passaggi elevati, scambiatore secondario sanitario potenziato a 20 piastre, circolatore ad elevata prevalenza, nuova elettronica di controllo. Tutti questi elementi sono progettati in modo da garantire massima efficienza ed affidabilità nel tempo anche, e non solo, in sostituzione di vecchi generatori in impianti particolarmente sporchi: ideale per la sostituzione «senza pensieri»SILENZIOSITÀ MAXIMA: SOLO 45 dBLa progettazione particolarmente curata di BLUEHELIX MAXIMA ha consentito di raggiungere valori significativi in termini di silenziosità e comfort acustico, tanto che si potrebbe quasi far fatica a distinguere il rumore di fondo di una abitazione dalla rumorosità prodotta dalla caldaia durante il funzionamento a regime. Anche i transitori di accensione/spegnimento della caldaia sono stati ottimizzati in funzione del comfort acustico, cosicché al cliente non toccherà più il fastidio di capire se la caldaia è accesa o spenta dalla sua rumorosità come sulle vecchie generazioni di caldaieINNOVAZIONE MAXIMASviluppare soluzioni sostenibili e a basso impatto ambientale in grado di contrastare il surriscaldamento climatico ora è una realtà! BLUEHELIX MAXIMA è già in grado di auto-regolarsi autonomamente (plug-in) e funzionare correttamente in totale sicurezza con miscele di gas naturale arricchite con l’idrogeno già previste in distribuzione in Europa (*)IL CONTROLLO IN CALDAIAL’innovativa elettronica di controllo e gestione di BLUEHELIX MAXIMA si pone ai massimi livelli della categoria. L’ampio display grafico a colori full touch screen da 7’’ permette la visualizzazione in tempo reale delle informazioni di funzionamento grazie a schermate grafiche semplici ed intuitive. Con un semplice tocco è possibile impostare i set point di temperatura per il riscaldamento e l’acqua calda sanitaria. Grazie alla guida contestuale, BLUEHELIX MAXIMA informa direttamente l’utente delle possibili cause di anomalia fornendo al tempo stesso al tecnico abilitato indicazioni su possibili soluzioni da intraprendere. Anche la pressione di impianto non è più un problema perché grazie alla funzione di elettrocaricamento impianto semi-automatica basta un semplice ‘’touch’’ e la caldaia ripristina automaticamente la pressione adeguata senza richiedere l’intervento manuale dell’utente.CONNECT Il controllo remoto Comando remoto fornito con il codice kit in classe A+ per la gestione del comfort domestico anche da Smartphone (*) Connessione alla rete WiFi domestica per l’accesso ad internet tramite ricevitore RF/WiFi a corredo Disponibile APP CONNECT per accensione/spegnimento caldaia e gestione del comfort domestico riscaldamento/sanitario da remoto tramite Smartphone (iOS e Android) Massimizzazione del comfort ambiente con regolazione modulante della temperatura di mandata tramite le funzioni di Compensazione Climatica Ambiente (CCA) e Compensazione Climatica Esterna (CCE) tramite temperatura esterna rilevabile direttamente da internet (o da sonda esterna opzionale) Migliora del +4% l’efficienza media stagionale in riscaldamento d’ambiente Programmazione oraria settimanale in intervalli da 30 minuti tramite APP CONNECT Visualizzazione allarmi anche tramite APP CONNECT Modalità di funzionamento: Off, Vacanza, Automatico, Manuale Tre livelli di temperatura modificabili: Comfort, Economy, Antigelo EFFICIENZA AL TOP ANCHE SU VECCHI IMPIANTI (SOSTITUZIONI) La geometria dello scambiatore del gruppo termico THERMOBALANCE™ di BLUEHELIX MAXIMA (figura A) consente il funzionamento quasi al massimo dell’efficienza di progetto anche in condizioni di parziale intasamento, mentre a parità di quantità di depositi e sedimenti (es. dovuti all’install azione su vecchi impianti) lo scambiatore tradizionale in figura B tende a otturarsi molto più velocemente nella parte a contatto con la fiamma a causa della ridotta area di passaggio del fluido, in cui si viene a costituire una vera e propria barriera di depositi* che ostacolano lo scambio termico e riducono l’efficienza al di sotto dei valori nominali.IL GRUPPO IDRAULICO POTENZIATO  Tutti i modelli della serie BLUEHELIX MAXIMA sono dotati di scambiatore a piastre sanitario potenziato a 20 piastre e di un circolatore riscaldamento potenziato ad al prevalenza da 7.5 m.c.a. Il notevole aumento della sezione di passaggio dello scambiatore a 20 piastre rispetto ad uno tradizionale (es. a 14 piastre) ne riduce fortemente l’intasamento nel tempo, anche in presenza di acque particolarmente dure, aumentando di molto la vita media dello stesso e riducendo al minimo i costi di manutenzione. La pompa potenziata di circolazione impianto da 7,5 metri di prevalenza consente a tutti i modelli di BLUEHELIX MAXIMA di poter funzionare correttamente erogando tutta la potenza necessaria anche in impianti ad elevate perdite di carico (impianti nuovi particolarmente estesi o vecchi impianti in presenza di incrostazioni). MC2 : MULTI COMBUSTION CONTROL L’elettronica controlla la corrente di ionizzazione di fiamma in modo da garantire una combustione ottimale al variare della densità dell’aria o della qualità del gas. La relazione tra il rapporto aria/gas (λ) ed il segnale di ionizzazione di fiamma viene utilizzata per il controllo del rapporto aria gas stesso e quindi della combustione. MC2: Multi Combustion Control, il nuovo sistema di combustione con tecnologia brevettata gas-adaptive migliora l’adattabilità di utilizzo al variare delle condizioni della rete gas (es. fluttuazioni o ridotte pressioni). Inoltre la nuova elettronica di controllo consente di raggiungere elevati campi di modulazione che possono arrivare fino a 1:12 per il modello 34C. In questo modo BLUEHELIX MAXIMA è in grado di adeguarsi alla potenza effettiva richiesta dall’impianto con estrema facilità ed efficienza, evitando fastidiosi funzionamenti di tipo on/off che aumentano i costi di esercizio e riducono la vita media del prodotto.CARATTERISTICHE Estetica con linee esclusive (Patent) che innovano radicalmente il concetto di design attraverso l’impiego del cristallo temperato e delle forme curve Ricca disponibilità di accessori opzionali: kit comando remoto wi-fi CONNECT gestibile tramite App, kit idraulici di collegamento (5 tubi, 4 rubinetti), carter copri-attacchi Caldaia con scambiatore primario in acciaio inox ad elevato spessore, con passaggi maggiorati a garanzia della durata e della ridotta manutenzione Circolatore riscaldamento modulante potenziato ad elevata prevalenza su tutti i modelli in grado di adattarsi anche ad impianti particolarmente resistenti Elettrocaricamento impianto semi-automatico di serie Scambiatore sanitario potenziato ad elevato numero di piastre particolarmente immune agli intasamenti ed in grado di mantenere costanti nel tempo la capacità di produzione dell’acqua calda sanitaria grazie all’abbinamento al comando remoto modulante CONNECT ed alla lettura della temperatura esterna direttamente da internet, raggiunge il massimo di efficienza energetica A+ (scala da G ad A+++) Si adatta agevolmente alle condizioni di carico grazie all’ampio range di modulazione che può arrivare fino a 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, nuovo sistema di combustione con tecnologia brevettata gas-adaptive per una migliore adattabilità di utilizzo al variare delle condizioni della rete gas Display touch screen grafico a colori da 7 pollici Visualizzazione immediata dello stato di funzionamento grazie al led multicolore frontale Particolarmente adatta al funzionamento in canne fumarie che necessitano di intubamenti “pesanti”, grazie al funzionamento con scarichi fumo diametro 50 mm Progettata per semplificare ed agevolare le normali operazioni di manutenzione e pulizia grazie al facile accesso ai componenti interni Cablaggio elettrico semplificato che non richiede la rimozione del mantello della caldaia grazie all’accesso diretto alla morsettiera esterna di collegamento disponibile sulla parte inferiore del prodotto Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto

Read more less

Ferroli condensing boiler Bluehelix HiTech RRT 28 K 50 with 50 liter storage tank low NOx flue gas kit for methane or LPG - New Heat input Min / Max Heating 3.5 / 24.5 Min / Max Sanitary heat output 28.5 Heating power Min / Max Heating 3.4 / 24.0 Thermal power 28 max Useful thermal efficiency 80°C-60°C Pmax % / Pmin % 98.1 / 98.0 NOx class 6 Boiler capacity 50 litres Heating efficiency class A Sanitary Efficiency Class A XL load profile Dimensions HxWxD mm 807x600x434 Bluehelix HiTech RRT K 50 > STRONG POINTS: - Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt - : in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) - Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (mod. 34) - MC2 : Multi Combustion Control, new combustion system with patented gasadaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) - MGR: Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits - Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace. - Production of domestic hot water with 50 liter stainless steel storage tank - Arrangement for recirculation attachments (present in the accessory: attachment connection kit) - Hydraulic connections covered by the boiler casing - Standard by-pass - "Range Rated" certified generator: the maximum heat input in heating mode can be adapted to the heat requirements of the system while maintaining the efficiency values ​​declared in the approval > BENEFITS OF BLUEHELIX HITECH RRT K 50: - Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes - FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard - Designed to simplify and facilitate normal maintenance and cleaning operations - Anti-legionella function with programmable timing from 1 to 7 days - Timed anti-blocking for circulator and three-way valve - Sliding temperature operation via optional external probe - Place of installation: also for outdoors in a partially protected place up to -5°C as standard - Free methane/LPG/propaneted air transformation during the initial product check and activation of the conventional guarantee, to be requested from the Authorized Assistance Center

Read more less

ATTENTION Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Ferroli condensing boiler Bluehelix Alpha 28C complete with methane or LPG fume exhaust kit cod. 0TPF4AWA Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max / min heat input (Hs) kW 27.2 / 5.3 Max DHW heat input (Hi) kW 28.5 Max working pressure heating bar 3 Min. heating operating pressure bar 0.8 Heating expansion vessel capacity 8 litres Max DHW working pressure bar 9 Minimum DHW operating pressure bar 0.3 Sanitary flow rate ∆t 25°C l/min 14 Protection degree (IEC 60529) IP IPX4D Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x250 Bluehelix Alpha .. More beautiful than "BEFORE" The new range of generators is equipped with the tested heat exchanger in stainless steel . Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX ALPHA is at the top of its category. TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) mod. 24 C COMBINED (14 l/min at ∆t 25°C) The BLUEHELIX ALPHA thermal group exchanger (fig. A) compared with the more classic and widespread steel exchanger. This geometry allows the exchanger to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig. B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values BLUEHELIX ALPHA FROM THE INSIDE EXCHANGER High flow single circuit stainless steel exchanger, resistant to clogging and easy to clean STEEL FRAME Made with high precision automated processes EXPANSION TANK 8 liter expansion tank placed on the side ELECTRIC PANEL FAN Offset fan, to facilitate maintenance of the primary exchanger without disassembly DOMESTIC HOT WATER EXCHANGER In stainless steel, with copper brazing CIRCULATOR High efficiency, for heating and exchange with the DHW circuit SEALED CHAMBER Removable steel panel to protect the combustion chamber with the function of a sealed chamber ELECTRICAL PANEL Large removable electrical panel to protect against water damage that may occur during normal maintenance. Easy access to electrical connectors. THE ENGINE The tube that makes up the BLUEHELIX ALPHA exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. THE BOILER CONTROL The control box of BLUEHELIX ALPHA consists of an easy to use interface with backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. MC2 The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). MGR Methane, LPG, Propane Ready Air The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Thanks to the new electronics supplied, the gas change operation is extremely simple. The MC2 combustion control performs constant monitoring of the quality of the combustion and by simply modifying a parameter on the electronic card (operation to be carried out only by qualified personnel) it is possible to operate the boiler on Natural Gas or LPG or Propane Air. It is therefore not necessary to purchase additional accessory kits. CONNECT New wireless remote control available as an accessory for home comfort management also from a smartphone using the connect app (iOS and Android). Maximizes room comfort with delivery temperature modulation through the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions via the external temperature detectable directly from the internet (or from an optional external probe). It improves the average seasonal efficiency in space heating by +4%. EASY MAINTENANCE Problem-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the BLUEHELIX ALPHA thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - Easy access to the burner unit by removing 4 screws and the quick coupling (clip) of the fan. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front SUN EASY FUNCTION BLUEHELIX ALPHA has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. By means of a sensor located on the DHW circuit, it continuously controls the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. STOP AND GO FUNCTION With the use of sanitary mixing taps, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these "false starts" can, in the long run, compromise the average life of the product. For this reason BLUEHELIX ALPHA provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water. OUTDOOR INSTALLATION - ANTIFREEZE FUNCTION To make the most of the available space, the new BLUEHELIX ALPHA 24 - 28 C boiler can be installed recessed into the wall thanks to the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. SANITARY ECO-COMFORT FUNCTION In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. The efficiency and the load profiles according to the ErP directive are at the top of the category: mod. 24 C / A - XL. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less