ARISTON CLAS EVO 28 CF EU BOILER Product code: 3300732 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: For heating and domestic hot water production Open chamber with natural draft Nominal heat input in heating max/min kW 29.5/13.0 Max/min heating thermal power (80°C-60°C) kW 26.7/11.2 Efficiency at nominal heat input % 90.6 Efficiency at 30% of nominal flow % 89.7 Performance stars (dir. 92/42/EEC) ★★★ Heating max/min temperature °C 35/ 85 Max/min domestic hot water temperature°C 36/60 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.5 Quantity of hot water ∆T=25°C litres/min 15.8 Quantity of hot water ∆T=35°C litres/min 11.3 Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 62 Degrees of protection of the electrical system IP X4D Dimensions (H x W x D) mm 770/400/315 METHANE power supply Evo class Conventional compact wall-mounted boiler with auto function The Clas Evo wall-mounted boiler is Ariston's solution for domestic comfort; it stands out for its innovative and captivating design and for its small size that makes it suitable for any type of furniture. It is available in the heating and domestic hot water production version in 2 powers: 24 and 28 kW (open chamber) Characteristics: Backlit multifunction LCD screen Continuous modulation high efficiency circulator Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Aluminum finned primary exchanger Arrangement for integration with system configuration through the new Bus Bridgnet® communication protocol Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO SUPER EVO DUE E 28S METHANE CONDENSING BOILER, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT Technical specifications Thermal input 29 kW Thermal power 28.4 kW Dimensions mm 803 x 400 x 385ÿ; 49kg Forced draft sealed chamber High yields (compliant with Dir. Rend. 92/42 CEE) METHANE power supply Features list OVERCOME TWO Superevodue the new condensing boiler created to adapt perfectly to both new and existing systems. Maintaining the fume heat recovery technology with a new aluminum exchanger, Superevodue maintains the aesthetics and interface of Superev to improve in terms of performance and reduction of consumption. Superevodue is easy to install and will be available in the combi and heating only versions, 24 and 28 kW, to satisfy all needs in terms of domestic hot water production and heating. High savings and optimal returns In the heat recovery system, the system water is preheatedÿwith the heat that would otherwise be dispersed with the combustionÿexhaust products. At typical operating temperatures of radiator systems, the efficiency is higher than that of a traditional generator. Ease of management Superevodue maintains the simplicity of the traditional boiler while retaining the ease of installation and regulation of the boiler. It uses recuperator technology to optimize yields and minimize consumption. Created to facilitate replacement in traditional systems, Superevodue presents a new fan which by optimizing combustion guarantees maximum efficiency. Superevodue is a four-star boiler, therefore condensing, but traditional in use and installation, easy to adjust and maintain. Three sanitary UNI EN 13203-1 Thanks to the presence of the mini-storage tank, Superevodue guarantees the production of domestic hot water in short response times. As shown by the graph, in fact, unlike a traditional boiler, in Superevodue the domestic water reaches its operating temperature in reduced waiting times and maintains this comfort temperature. stable for a much longer time.ÿThe reduction of times and the stability of the temperature are linkedÿto the presence of the mini-accumulator, which has the task of keeping the primary water at temperature. Three health stars are therefore synonymous with guaranteed well-being savings in a single product. Thermoregulationÿ By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. Superevodue will adapt its operation to the external climatic conditions. In fact, the regulation makes it possible to use suitable and different delivery temperatures according to the climate. The use of the climatic regulation allows the overall efficiency of the system to be increased as required by recent legislation. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Characteristics: Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Heating / domestic hot water nominal heat input kW 20/28 Heating / domestic hot water reduced heat input kW 2.80 Supply voltage/frequency: 230/50 Volt/Hz NOx Class 5 Supply voltage / frequency Volt/Hz 230/50 Boiler dimensions (HxLxP) mm 780x400x365; 36 Gas version available: METHANE Warm-up exercise: Maximum pressure and temperatures bar / °C 3 / 90 Expansion vessel capacity 9 litres Healthcare exercise: Minimum / maximum pressure 0.2 - 6 bar Quantity of hot water with Δt =25° litres/min 16.1 Minimum domestic water flow rate litres/min 2 To view further technical information on the product CLICK HERE The new MySMART condensing boiler is designed following the ecodesign indications provided for by the European ErP Directive. MySMART has a higher power in DHW mode thus offering greater comfort. The boiler, an instantaneous combined model, offers as standard the new front access condensing exchanger with improved efficiency (94% seasonal efficiency) and the low consumption FLEX modulating circulator with modifiable head up to 7m. MySMART is compatible with the new Ø 50 mm flue with which it is possible to carry out ducting up to 7m. The BeSMART Comfort Control is inserted as standard with MySMART with the WiFi Box, the external probe, the flue splitter, the plumbing fittings cover, the template, the heating taps with filter, the brass plumbing fittings, the gas taps and sanitary. It forms a class A + system without the addition of options BeSMART WiFi Comfort control included as standard Available APPs for management from Smartphone and Tablet Very high modulation (up to 1:10) Flex low consumption circulator (EEI ≤ 0.20 ) with 6m head adjustable to 7m Possibility of ducting with the special flue in PP Ø 50 Standard ø 80 mm splitter General characteristics BeSMART the advanced comfort control Leaving for your home in the mountains? Or returning from a business trip? Through your Smartphone or Tablet, with the BeSMART App you can turn the boiler on and off, read the home and outside temperature and change the time programming of your heating system. The BeSMART WiFi Comfort Control Panel, standard in the MySMART boiler, is the remote boiler management device with chronothermostat functions. With the WiFi Box kit (series) it is possible to manage comfort even remotely with a Smartphone and Tablet. Simple and intuitive, it allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the keys, the temperature of the heating water and domestic hot water is set easily and intuitively and the time programming is carried out. MySMART also features the Easy Climate function (thermoregulation with standard external probe). MySMART, the elegant The new MySMART boiler is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to easily select all the functions necessary for using and setting the boiler. OTHER CHARACTERISTICS: Telemanagement : Remotely, with BeSMART, you can turn the boiler on and off, change the temperatures, program the weekly chronothermostat, view the home temperature. Management with tablets and smartphones : Compatible with smartphones and tablets using the Android (≥ 3.0 ver.) or iOS system. Downloadable Apps: Available APPs compatible with Android (≥ ver. 3.0) and iOS systems for switching on/off and managing boilers/systems remotely via Smartphone and Tablet. WiFi : WiFi communication between the WiFi Box and the home ADSL WiFi modem router to connect to the internet. Possibility to connect to the optional WiFi modem kit for SIM CARD as an alternative to the ADSL modem. RF : RF (radio frequency) communication between the BeSMART Comfort Control and the WiFi Box; Possibility of connecting up to 8 BeSMART Comfort Controls in RF to manage up to 8 different zones/environments (wireless communication up to 40 m away). Weekly heating time programming : Heating time programming in 30 minute intervals and possibility to choose between different pre-set programs. Holiday function: For quick entry of the number of holiday days in which to operate the generator in order to have a reduced room temperature. The acronym ErP, an acronym for "Energy related Products", identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015, the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class. Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility of easily identifying the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Beretta's commitment is concrete and is directed towards an increasingly eco-sustainable future. This is why Beretta is already ErP-Ready today with solutions for any installation and comfort requirement linked to autonomous residential and centralized systems. A complete and constantly evolving catalog with many ErP-Ready proposals in the case of mere replacement, energy redevelopment, renovation or new construction. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX TERA 28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Product code: 3.027369 Energy label specifications according to the European ErP directive Heating energy efficiency Class Sanitary Energy Efficiency Class Withdrawal profile: XL Characteristics of heating/DHW operation: Maximum nominal heat input in DHW kW 32.6 Maximum nominal heat input in heating kW 28.6 Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) % 97.9 Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 15.3 Nominal heating expansion vessel capacity (total) liters 10 (6.4) Electrical protection degree IP X5D Boiler weight full of water (empty) kg 37.9 (35.5) VICTRIX TERA Everything you need, immediately and in a small space It is the new line that strengthens the Immergas range with boilers dedicated to those looking for quality and simplicity. All the appliances are condensing and above all with total premixing to save gas efficiently. The dimensions are compact and the easy placement allows flexibility to adapt to new installations or to replace existing appliances in the home, outdoors in protected places, recessed with OMNI CONTAINER. There are two instantaneous versions - 24 and 28 kW - and one for heating only of 24 kW which can be combined with boilers of various capacities. The entire range you find is equipped with a condensing module with stainless steel coil and designed to comply with the new European Directives on the use of energy. VICTRIX TERA boilers fall into class 6, the most ecological in the European classification, for low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). All versions can discharge the fumes on the wall in the cases envisaged by DL 102 of 4 July 2014. The controls are simple, the LCD display is clear and the selection buttons for adjustments and settings are activated quickly. Features and strengths: Low consumption: the low consumption circulator allows for considerable savings in electricity. Standard: the cover of the water connections improves the aesthetics in domestic environments. Comfort Ease of use: practical buttons and a backlit display allow you to easily manage and view the boiler setting. DOMINUS App: simple and intuitive, it allows you to check the functioning and temperature of the boiler, turn it on and off from anywhere via smartphone or tablet. Options. Environmental compatibility Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 6 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA DUO-TEC+ 28 GA LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 28.9 Heating nominal heat input kW 24.7 Sanitary nominal thermal power kW 28 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: LPG Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models : heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40-litre storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO SUPEREVODENS 28S CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW ERP Model: SuperEVOdens 28S Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 29 kW Heating/DHW maximum useful power: 28.3 kW Yield name 60°/80°C: 97.7% Yield at 30% load: 98.9% High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) NOx class 2 Weighted NOx: 158 mg/kWh Minimum/maximum heating temperature: 40/85°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion tank capacity 8 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25 K)/(ΔT=35 K): 16.3/11.6 l/min Specific sanitary flow rate (ΔT=30 K): 13.6 l/min Voltage / Power at nominal heat input V~/ W 230/93 IPX4D degree of protection Dimensions HxWxD 803x400x350; 44 kgs Power supply: methane or LPG Standard Digital electronic room thermostat Boiler support bracket and paper template Condensate collection siphon Quick instruction to the user SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution system for heating. SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. Characteristics: High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Copper lamellar primary heat exchanger with large exchange surface and double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel Insulated mini-tank kept in temperature by the boiler (selectable function) to significantly reduce waiting times in the production of domestic hot water High efficiency pump with low energy consumption Digital control panel with backlit display Electronic card for: - Restart frequency adjustment - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function Integrated automatic by-pass 8 liter expansion tank Immunity to radio interference Magnetic sanitary flow switch Absolute heating pressure switch IPX4D degree of protection Possibility of integrating SuperEVOdens with Savio solar systems using the optional solar kit Propane air supply, methane and LPG High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery   The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler correctly discharges the condensate. Command panel Summer / winter / off setting Heating temperature regulator DHW temperature regulator Gauge Fault diagnostics and lockout status shown on display Heating and DHW temperature shown on the display Reset button Easily accessible electrical connections Arrangement for external probe Arrangement for remote control Thermoregulation By connecting the external probe (optional) directly to the boiler, climatic regulation can be used. SuperEVOdens will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption. By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER ATTENTION: THE PRODUCT WILL BE SUPPLIED WITHOUT THE SPECIFIC SMOKE KIT! Technical Features Model : Victrix 28 KW TT Boiler Code: 3.025511 Template Code: 2.015543 Type: Snapshot Useful Heating Power: 24 kW Useful Sanitary Power: 28 kW Modulation Range: 11 - 100% Hot water production (∆t 30 °C): 13.4 l/min Dimensions (H x W x D): 748 x 440 x 255 mm Weight: 32.0 Kg VICTRIX 28 KW TT Maximum energy savings, maximum flexibility With VICTRIX 28 kW TT Immergas takes the installation flexibility of condensing boilers even further and offers a wide variety of solutions thanks also to the extreme compactness of its dimensions , just 25 centimetres deep. All boilers can be installed: Inside ; Built-in with OMNI CONTAINER but also in SOLAR CONTAINER or DOMUS CONTAINER to add products that use solar thermal energy and heat pumps to the boiler in the GAUDIUM SOLAR V2 or TRIO V2 applications; Outdoors in partially protected places ; And today also in the open air with the dedicated coverage kit. This increases the possibility of creating systems that comply with the new European Directives, which are increasingly oriented towards condensing technology to reduce pollution and increase energy savings. The eco-friendly VICTRIX kW TT condensing range expresses the best of Immergas technology, offering great performance thanks to the innovations introduced in the product design. Two instantaneous versions of 28 and 35 kW are available, and three heating-only versions (12, 24 and 32 kW PLUS) that can be combined with domestic hot water boiler units of various capacities. HIGH HYDRAULIC PERFORMANCE Primary condensation exchanger, made of an Aluminum-Silicon-Magnesium alloy, particularly resistant to corrosion. Designed to have high flow rate and head performance even on old heating systems thanks to the large water passages. This also means a low risk of clogging in the presence of impurities in the system water. It is important to maintain the pH of the heating system filling water, between 6.5 and 8.5 with a hardness of 15 °F REDUCTION OF ELECTRICITY CONSUMPTION Electricity savings thanks to the low consumption modulating circulator, in class A. The circulator can be set in the operating modes: constant ∆t, proportional prevalence or constant speed . The presence of two NTC probes on the system flow and return allows constant modulation of the boiler operating conditions based on the requests of the heating system with a consequent increase in seasonal efficiency. The boiler's electrical consumption in stand by is less than 6 W DESIGNED TO FACILITATE PROFESSIONALS VICTRIX kW TT, produced on the new highly automated lines at the historic Immergas headquarters in Brescello, is a specific range of products developed on the “Top Tech” platform. It features special technical features designed to facilitate the work of professionals such as: Safety valve discharge piped into condensate drain; Cover casing for hydraulic connections, to better fit the boiler into domestic spaces; Direct accessibility to the electrical connection compartment of the main external devices (e.g. CARV2, external probe, CRONO 7) by simply removing the front aesthetic cover without the need to open the product. SELF-ADAPTING COMBUSTION The electronic gas valve allows air/gas control via a multifunction electrode placed inside the combustion chamber; the electronic board automatically adapts the combustion parameters in the event of variations in air or fuel density. This allows VICTRIX kW TT to be powered by any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example when the Authorized Assistance Center starts up for the first time). The boiler is therefore supplied with a single product code . COMFORT High hydraulic performance: the innovative condensing module guarantees high flow rate, low risk of clogging due to impurities in the system water, greater resistance to corrosion thanks to the special alloy. High seasonal efficiencies: the boiler's wide modulation range allows for high seasonal efficiencies with consequent reduction in gas consumption . Thermoregulators: optional. They improve comfort and increase energy savings. DOMINUS App: optional. Simple and intuitive , it allows you to check the boiler operation and temperature, activate its switching on and off from any location via smartphone or tablet. EXTRA Comfort Formula: uses the most complete maintenance program that allows you to extend 5 years with free activation the conventional guarantee which, in collaboration with the Authorized Immergas Assistance Center, can be activated during the initial check. ENVIRONMENTAL COMPATIBILITY Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European standards UNI 297 and 483): the best for reduced nitrogen oxide emissions (NO X ). Renewable energy: can be combined with solar systems and hybrid systems with heat pumps. INSTALLATION Maximum flexibility: approved for indoor, built-in and outdoor operation, even in the open air . IPX5D electrical protection. Antifreeze as standard up to -5 °C. Maximum compactness: only 25 cm deep. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

FONDITAL FORMENTERA CTN 28 METHANE OPEN CHAMBER GAS BOILER Characteristics of heating/DHW operation: Open chamber with natural draft Nominal heat output: 28 kW Efficiency at maximum power: 90.0% Efficiency at 30% load: 87.8% Classification according to 92/42/EEC: ** NOx class (EN 297/EN 483); 2 Min-max sanitary pressure: 0.5 - 6 bar Heating temperature adjustment °C 35-78 Expansion vessel capacity: 7 l DHW production ∆t 30°C: 13.5 l/min Total absorbed electric power: 56 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 420x750x315 mm; 36kg METHANE power supply Warranty: 2 years FORMENTERA CTN Formentera CTN is a wall-hung instantaneous combined gas boiler with open chamber and natural draft. The gas boiler is equipped with a touch screen user interface and is set up to be powered by methane or LPG. Pluses: Touch screen user interface Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates Standard management of three types of solar thermal system Boiler change kit Characteristics: High efficiency circulator with built-in deaerator Standard management of 3 types of solar thermal system Monothermal primary heat exchanger Sanitary heat exchanger with 26 stainless steel plates Integrated hydraulic unit including automatic by-pass, safety valve, pressure transducer, drain cock and connection to the expansion tank Integrated electronic board for safety and flame modulation Sliding temperature operation with external probe (optional) Management of high and low temperature heating zones, via electronic board (optional) Efficiency classification according to 92/42/EEC: ★★ Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX TERA 28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Product code: 3.027369 Energy label specifications according to the European ErP directive Heating energy efficiency Class Sanitary Energy Efficiency Class Withdrawal profile: XL Characteristics of heating/DHW operation: Maximum nominal heat input in DHW kW 32.6 Maximum nominal heat input in heating kW 28.6 Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) % 97.9 Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 15.3 Nominal heating expansion vessel capacity (total) liters 10 (6.4) Electrical protection degree IP X5D Boiler weight full of water (empty) kg 37.9 (35.5) VICTRIX TERA Everything you need, immediately and in a small space It is the new line that strengthens the Immergas range with boilers dedicated to those looking for quality and simplicity. All the appliances are condensing and above all with total premixing to save gas efficiently. The dimensions are compact and the easy placement allows flexibility to adapt to new installations or to replace existing appliances in the home, outdoors in protected places, recessed with OMNI CONTAINER. There are two instantaneous versions - 24 and 28 kW - and one for heating only of 24 kW which can be combined with boilers of various capacities. The whole range that you find on CaldaieMurali.it is equipped with a condensing module with stainless steel coil and designed to comply with the new European Directives on the use of energy. VICTRIX TERA boilers fall into class 6, the most ecological in the European classification, for low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). All versions can discharge the fumes on the wall in the cases envisaged by DL 102 of 4 July 2014. The controls are simple, the LCD display is clear and the selection buttons for adjustments and settings are activated quickly. Features and strengths: Low consumption: the low consumption circulator allows for considerable savings in electricity. Standard: the cover of the water connections improves the aesthetics in domestic environments. Comfort Ease of use: practical buttons and a backlit display allow you to easily manage and view the boiler setting. DOMINUS App: simple and intuitive, it allows you to check the functioning and temperature of the boiler, turn it on and off from anywhere via smartphone or tablet. Options. Environmental compatibility Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 6 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA DUO-TEC+ 28 GA METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Load profile: XL DHW nominal heat input kW 28.9 Heating nominal heat input kW 24.7 Sanitary nominal thermal power kW 28 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: METHANE Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models : heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40-litre storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL Nominal heat output: 28 kW Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.8% Sanitary water production ΔT 25°C: 16.1 l/min Degree of protection: IPX5D Dimensions (hxwxd): 700 x 400 x 299 mm ; 34 kgs Power supply: CNG or LPG * Operation with LPG through adjustment by the Authorized Service Centre Duo-tec Compact+ Wall mounted gas condensing boilers ideal for both new build and replacement Digital control panel The Duo-tec+ range of boilers is equipped with a new digital control panel with an even more backlit LCD display, clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way. Efficiency and savings Wide modulation range: greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating / cooling of the premises GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions – reduced measurements, calibrations with this system, the boiler self-adapts to the quality of the gas (methane) and to the length of the flue gas pipes, keeping the efficiency constant the boiler also constantly self-regulates to maintain the maximum efficiency values ​​favoring a reduction of gas consumption and generating less pollution thanks to the continuous control of emissions. Fully modulating pump with de-aeration The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs. During the first ignition phase, we recommend activating the automatic de-aeration function. This function eliminates the presence of air in the heating circuit and therefore avoids any blockages of the boiler, overheating of the system, etc. Guidelines in case of replacement of a conventional boiler with a new condensing one There are two main problems that can be encountered: Flues and smoke exhaust duct Condensate drain To overcome the above, Baxi recommends: the use of a Ø50 mm exhaust pipe Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models). For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes. (*) Each Ø50 mm diameter bend decreases the length of the drain by 4m the use of the condensate drain pump Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of buildings avoiding the use of annoying pipes. Condensing Boilers The ranges of Duo-tec+ condensing boilers are characterized by very high modulation, the GAC system and remote capability. Very high modulation The wide modulation range up to 1:10 allows a reduction of the switching on/off of the boiler, resulting in an improvement in efficiency and consequently a considerable saving. GAC system The GAC (Gas Adaptive Control) system continuously measures the flame signal during boiler operation and adjusts the gas flow rate in order to keep the combustion quality constant. The resulting advantages are: reduction of installation times/ there are no manual adjustments to make/ reduction of gas consumption and lower environmental impact. Remote control For optimal comfort management, the Duo-tec+ offer a wide range of modulating units. In Platinum+ the extractable control panel and room thermostat are supplied STANDARD with the boiler. Available as optionals are the modulating chronothermostat and the LED interfaces that allow the units to be remotely remoted via wire or wireless. Also for the Duo-tec models, the offer of thermoregulation accessories includes both the remote control and climatic regulator and the wired or wireless modulating chronothermostat, in addition to the wired or wireless modulating thermostat. All boilers are provided with an antifreeze function and IPX5D degree of protection. Duo-tec Compact+ wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control high-efficiency circulation pump with total modulation digital control panel with large backlit LCD display predisposition for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod 24 kW ultra-compact dimensions: 700x400x299 mm antifreeze function and IPX5D degree of protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less