NB THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Riello Open Chamber boiler mod. START 24 KI Low NOx - NEW ErP CODE 20151434 Product code: 20151434 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.7 kW Heating/DHW nominal heat output: 24 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°): 90.1-86.4% Profit return 30% (47th return): 89.2% Open chamber with natural draft NOx class: 6 Min/max heating operating pressure: 0.25-3 bar Max absorbed electric power: 47 W Expansion vessel: 8 litres Min/max pressure in DHW: 0.15-8 bar Quantity of hot water with Δt 25°C: 13.8 l/min Quantity of hot water at Δt 30°C: 11.5 l/min Quantity of hot water at Δt 35°C: 9.9 l/min Sanitary water temperature selection range: 37-60°C Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs Electrical protection degree: IP X5D Power supply: METHANE Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX CX GREEN 24 EU CONDENSING GAS BOILER COMPLETE WITH LPG FUME KIT WITH FREE DIRT SEPARATOR RUBINETTERIE BRESCIAN !!! Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi) : 23.5/4.5 kW Max/min DHW nominal heat input (Hi) : 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW Efficiency at nominal heat input: 97.7 / 88% Efficiency at 30% of the nominal heat input: 104.3 / 94% Expansion vessel capacity: 8 l Min/max heating temperature (high temperature range) °C 35/82 Min/max heating temperature (low temperature range) °C 25/45 DHW temperature min/max °C 36/60 Instantaneous quantity of hot water ΔT=25°C l/m 13.9 Instantaneous quantity of hot water ΔT=35°C l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 34 Electrical protection degree IP X5D CX GREEN EU   The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Baxi Duo-Tec Compact E 24 MAGO kW low NOx condensing boiler complete with methane or LPG fume exhaust kit with integrated maGO thermostat - New Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Seasonal space heating energy efficiency ŋs % 93 Emissions of nitrogen oxides NOx mg/kWh 15 Minimum operating temperature °C -5 Expansion vessel capacity l 7 Heating circuit water temperature adjustment °C 25-80 Domestic hot water production ∆T 25°C (1) l/min 13.8 DHW circuit minimum water flow rate l/min 2 Dimensions (hxlxp) mm 700x400x299 Degree of protection IPX5D DUO-TEC COMPACT E range New design: change the aesthetics, not the performance. Luna Duo-tec E and Duo-tec Compact E: the already well-known Baxi boilers present themselves today with a new aesthetic, increasingly modern and attentive to new design trends, which allows them to be inserted in any living context. The control panel has also been completely renewed and is equipped with a new backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys. The new boilers, even more beautiful and modern thanks to the restyling, however keep intact the characteristics that have always distinguished the Duo-tec range: Reliability. Robustness, durability and reliability in performance; Efficiency and savings. The reduction of the on/off cycles translates into considerable benefits in terms of energy savings and lower emissions; Completeness of range. Heating only models, with instantaneous DHW production, and also the compact version with the possibility of outdoor installation. The range has been further enriched with the new models equipped as standard with the modulating chronothermostat with integrated Wi-Fi Baxi Ma go The ideal boiler for new builds and replacements The Duo-tec E range of gas condensing boilers have been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make them particularly suitable for both new builds and replacement old generator. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created for the final consumer, so that, through real and comparable data, he can make informed choices by targeting high-efficiency products. Exchanger preheating function The boilers of the Duo-tec E range are equipped with the exchanger pre-heating function which guarantees the immediate production of domestic hot water at the set comfort temperature. In fact, the sanitary water passing through the plates of the preheated exchanger is already supplied at the desired temperature without waiting times. The function can be easily activated/deactivated by a specific boiler parameter Boiler info By pressing the dedicated key , it is possible to view numerous information regarding boiler operation such as: heating system water pressure (electronic pressure transducer present in the hydraulic group); heating flow/return temperature; external temperature (with external probe installed); domestic hot water temperature. Efficiency and savings greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions; adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises. Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions - reduced measuring, calibration or changing nozzles with this system, the boiler self-adapts to the quality of the gas and the length of the flue gas pipes, keeping efficiency constant the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions Outdoor installation Duo-tec Compact E boilers can be installed outdoors in partially protected places thanks to the new top cover kit and bottom closure kit (available as accessories). In fact, the Duo-tec Compact E range is equipped AS STANDARD with an electronic antifreeze system which guarantees operation down to a temperature of -5 °C: the IPX5D protection also protects the electrical parts from jets of water which may come from all directions. New modern and elegant design for the whole range Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display New cover kit: possibility of outdoor installation in partially protected places (optional accessory) Rigid and flexible Ø50 mm exhaust pipe connection: solution for restoring flues - for mod. 24 kW total length 40 meters (intake+exhaust) Compact dimensions: 700x400x299 mm hydraulic system Electric three-way diverter valve Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense even in DHW operation Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch that blocks the gas in the event of a water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit pressure gauge Wifi included The modulating chronothermostat with integrated wi-fi has been designed to simplify the lives of installers, service centers and end users, as it allows you to manage home comfort directly from an App, via the wi-fi connection. By downloading the dedicated App on your smartphone or tablet, it will be possible to connect to the Baxi Mago to control the temperature, manage programming, view the consumption graph, read any error messages, set the holiday mode, etc. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE JUNKERS CERAPUR BALCONY ZWB 24-1 EB CONDENSING BOILER for outdoor use COMPLETE WITH FUME KIT - NEW ErP Technical specifications Heating and DHW energy efficiency class (ErP): A/A For heating and domestic hot water production Loaded profiles declared XL Nominal heat input (heating): 24.6 kW Nominal thermal power (sanitary): 24 kW Nominal heat input (sanitary): 24.4 kW Thermal efficiency at nominal power 40/30°C: 104.3% Efficiency thermal useful at 30% nominal load 40/30°C: 109.2% Continuous sanitary production: 11.5 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 5 Absorbed electric power: 140 W Degrees of protection: IP X5D Dimensions (Depth x Width x Height): 285 x 535 x 775 mm; 54kg Version: LPG MAIN FEATURES CERAPUR BALCONY Wall-mounted condensing boiler for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Small and compact, CERAPUR BALCONY has been designed to solve the problems of space, resist bad weather, while ensuring maximum comfort in the production of heat and domestic hot water. Advantages: Wall-mounted condensing boilers for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Certifications achieved of tipC13, C33, C63, C83, B33. Suitable for use with 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation. We will remotely control the digital room chronothermostat with the following functions: two fixed heating programs P1 and P2; a programmable P3 heating program with 22 available time slots; setting of the operating temperatures both in heating and in DHW; display of boiler operating status and any anomalies; in combination with the external probe (accessory) the functioning as a climatic control unit is activated which automatically regulates the delivery temperature according to the external temperature. Automatic antifreeze function up to an external temperature of -15°C, on both the sanitary and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW heating). Primary heat exchanger in patented high efficiency aluminosilica alloy. Domestic hot plate heat exchanger for condensing also in DHW. 6 liter heating expansion tanks. Circulator in Energy Class A. The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparisons. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete aid for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, and allow him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, the task of whoever builds/installs the system is to provide the consumer with the correct explanatory label . The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are currently incentivized at the tax level. Junkers Bosch, already in line with the dictates of the ErP legislation, represent a future that has always distinguished the brand. Warranty: All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE JUNKERS BOSCH CERAPUR BUILT-IN CONDENSING BOILER ZWB 24-1 EI 24 kW INCLUDING FUME KIT - NEW ErP ErP energy class (Heating and DHW) For heating and domestic hot water production Nominal heat input in DHW kW 24.49 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat input (sanitary): 7.4 kW Sanitary flow rate ΔT = 30 K: 11.5 l/min NOx class: 5 Voltage v(AC): 230 HZ frequency: 50 Absorbed electric power: 140 W IP Protection Degree: X5D Dimensions: 243 x 533 x 775; 47 kgs Standard: Controllable from home - Management of the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. CerapurRecessed CERAPUR INCASSO is designed for concealed installations and encloses maximum comfort in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. In fact, CERAPUR INCASSO integrates perfectly into the façade thanks also to the possibility of painting the "shell" with the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in the niche in the wall Controllable from inside the house - Management of the boiler directly from inside the house, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the aluminum alloy construction of the primary exchanger Electrical insulation - The boiler has an IPX5D degree of electrical insulation Characteristics: Wall-mounted condensing boilers for outdoor use with DHW production that can be combined with solar thermal systems for DHW using the Solar Kit. C13, C33, C63, C83, B33 type certifications obtained. Suitable for use with Ø 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a special niche, dedicated to the built-in Guscio (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the DHW and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW and heating). Patented high efficiency silicon-aluminum alloy primary heat exchanger. Oversized sanitary plate heat exchanger for condensing also in DHW. Heating side expansion vessel of 6 litres. Circulator in Energy Class A. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product code: 3310508 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi) : 23.5/4.5 kW Max/min DHW nominal heat input (Hi) : 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW Efficiency at nominal heat input: 97.7 / 88% Efficiency at 30% of the nominal heat input: 104.3 / 94% Expansion vessel capacity: 8 l Min/max heating temperature (high temperature range) °C 35/82 Min/max heating temperature (low temperature range) °C 25/45 DHW temperature min/max °C 36/60 Instantaneous quantity of hot water ΔT=25°C l/m 13.9 Instantaneous quantity of hot water ΔT=35°C l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 34 Electrical protection degree IP X5D CX GREEN EU   The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : EcoTEC Pure VMW 246/7-2 Product code : 0010019985 Power supply: LPG Performance Heating power : 7.5 ~ 24.0 kW Sanitary rated power : 7.0 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 5 Performance Stars : ★★★★ Domestic hot water production (ΔT = 30K) 13.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel capacity: 8 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x335 mm Weight : 30.8Kg Warranty extension to 7 years EcoTEC Pure VMW wall-mounted indoor condensing boiler The simplest that adapts to everyone's needs The new ecoTEC pure design immediately recalls the quality and reliability that characterize Vaillant's DNA. Indoor condensing boiler with Vaillant standard measurements 72 cm high, 44 cm wide and 33 cm deep. ecoTEC pure was designed with the intention of offering the ideal solution for replacing traditional boilers, including those of other brands , thanks to the vertical hydraulic connections, which guarantee great flexibility. A series of connection kits allow the rapid replacement of the atmo-turboBLOCK models. Ease of management thanks to a series of commands and a very simplified display , suitable for all types of customers. Vaillant has identified an innovative solution to prevent freezing of the condensate siphon, the element most sensitive to frost and thanks to the ecoLEVEL accessory it is possible to convey the condensate into the appropriate drains. The boiler features a new high-efficiency pump with high performance , a stainless steel exchanger and an 8-litre expansion vessel. Simply Vaillant Best value for money ecoTEC pure represents the ideal solution for anyone who wants to switch to Vaillant without worries because it is equipped with vertical connections that make installation quick and easy. Vaillant quality guarantees low consumption and good energy efficiency: the boiler is in class A both in heating and in DHW. The pure range consists of a single natural gas model with combined production. One kit allows you to switch to propane and propane air power. The boiler features a new thermo-hydraulic module equipped with a modulating pump to guarantee low electricity consumption while a new stainless steel exchanger and a wide modulation range up to 1:4 guarantee gas savings ecoTEC pure is the range dedicated to the replacement of boilers of other brands, possible thanks to the simplicity of the vertical connections and ease of use. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC pure the easiest way to switch to Vaillant condensing Solution for heating and domestic hot water Complete range of accessories for replacing traditional boilers Reduced consumption thanks to the high efficiency pump Simplicity of management Small size Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION The boiler will be supplied with methane. For LPG operation, the standard LPG conversion kit is supplied. Technical features Model : CLAS B ONE WIFI 24 Code: 3302127 Nominal heat input in heating max/min PCI : 22.0 / 3.3 kW Nominal heat input in DHW max/min PCI : 26.0 / 3.3 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A Sanitary Energy Efficiency Class: A Withdrawal profile: XL Combustion efficiency (flue gas) % 97.9 Efficiency at nominal heat input (60/80°C) PCI % 97.7 Efficiency at nominal heat input (30/50°C) PCI % 106.1 Efficiency at 30% at 30°C PCI % 109.8 Minimum efficiency (60/80°C) PCI % 95.6 health circuit Min/max DHW temperature °C 40 / 65 Specific flow rate in sanitary mode (10 min. with ΔT=30°C) l/min 18.8 Instantaneous quantity of hot water ΔT=25°C l/min 22.6 Instantaneous quantity of hot water ΔT=35°C l/min 16.1 Domestic water pressure max/min bar 7/0.2 Minimum withdrawal of hot water l/min 2 Dimensions and weight LEGEND A \ System delivery B \ Hot water outlet C \ Gas inlet D \ Cold water inlet E \ System Return Weight : 57.2kg Description Condensing boiler with integrated 40 l storage tank AUTO FUNCTION: Maximum comfort, efficiency and energy saving based on the automatic analysis of the environmental conditions, the connected external devices and the required performance. COMFORT FUNCTION: Speeds up hot water dispensing in two modes: Comfort Plus mode (always hot water in just 5'') and Comfort mode (hot water for 30' after the last tap). SYSTEM MANAGEMENT: New communication protocol designed to ensure complete system management. SUPER SILENCE: Silence in all operating modes. XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head Wifi integrated in the boiler Compatible with Ariston NET APP Modulation ratio 1:8 2 stainless steel stratification boilers of 20 lt Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital ISCHIA KC 28 kW condensing boiler complete with Low NOx Methane flue kit KIOI02KC28 - ErP KC 28 S CNG Class A space heating DHW heating A XL load profile Dimensions LxHxP 400x700x250 33.5 Nominal thermal power (Pnominal) kW 26 Seasonal space heating energy efficiency (ηs) % 92 Water heating energy efficiency (ηwh) % 80 Nominal heat input (Qn) kW 26.4 Nominal thermal power (80-60°C) (Pn) kW 25.5 Thermal power (50-30°C) kW 28.0 Reduced heat input (Qr) kW 3.3 Useful efficiency at nominal flow rate (80-60°C) % 96.7 Useful efficiency at nominal flow rate (50-30°C) % 105.9 Useful efficiency at 30% (30°C return) % 107.5 Heating expansion vessel capacity l 9 DHW nominal heat input kW 30.4 Specific sanitary flow rate ΔT=30K l/min 15.0 NOx emission class - 6 IP electrical protection degree IPX4D ISCHIA KC WALL-MOUNTED CONDENSING BOILER WITH INSTANT PRODUCTION OF DOMESTIC HOT WATER PLUS High domestic hot water production, more power during domestic hot water operation (28 - 30 kW) Class 6 of NOx emissions Modulation ratio 1:9 Multifunction relay for connection to systems with zone valves or external pump management or remote alarm signalling 9 liter expansion vessel High efficiency modulating circulator with built-in deaerator TECHNICAL FEATURES LCD user interface with diagnostics Management of 2 types of solar thermal system (with additional kit) Thermoregulation with external probe (optional) Compact, only 250 mm deep Arrangement for connection to the Remote Control (optional, supplied by the manufacturer) Programmable parameters to adapt the boiler to the installation and alarm history Automatic by-pass Heat exchanger in thermopolymers and stainless steel 3-speed circulator with built-in deaerator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital ISCHIA KC 24 kW condensing boiler complete with flue gas exhaust kit Low NOx Methane - ErP Energy efficiency class in heating A XL load profile Nominal thermal power (Pnominal) kW 23 Nominal heat input (Qn) kW 23.7 Seasonal space heating energy efficiency (ηs) % 92 Thermal power (50-30°C) kW 24.9 Heating expansion vessel capacity l 9 Specific sanitary flow rate ΔT=30K l/min 13.4 NOx emission class - 6 Supply voltage/frequency V/Hz 230/50 IP electrical protection degree IPX4D Dimensions 400x700x250 Natural gas supply ISCHIA KC Ischia KC is a sealed chamber condensing boiler with forced draft for the production of hot water for heating and the instantaneous production of domestic hot water; PLUS High domestic hot water production, more power during domestic hot water operation (28 - 30 kW) Class 6 of NOx emissions Modulation ratio 1:9 Multifunction relay for connection to systems with zone valves or external pump management or remote alarm signalling 9 liter expansion tank High efficiency modulating circulator with built-in deaerator TECHNICAL FEATURES LCD user interface with diagnostics Management of 2 types of solar thermal system (with additional kit) Thermoregulation with external probe (optional) Compact, only 250 mm deep Arrangement for connection to the Remote Control (optional, supplied by the manufacturer) Programmable parameters to adapt the boiler to the installation and alarm history Automatic by-pass Heat exchanger in thermopolymers and stainless steel 3-speed circulator with built-in deaerator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS EQUIPPED WITH AUTOMATIC COMBUSTION CONTROL. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Baxi Luna Air 24 kw built-in boiler complete with methane or LPG outdoor fume exhaust kit A7740032 Integrated Wi-Fi Technical features Sanitary nominal thermal power: 24 kW WI-FI control panel kit STANDARD in the Luna Air model WI-FI: Hybrid App for smartphones and tablets for remote control of the boiler Heating nominal heat input: 20.6 kW Heating rated thermal power 80/60°C: 20 kW Heating rated thermal power 50/30°C: 21.8 kW Reduced thermal power 80/60°C: 3.4 kW Reduced thermal power 50/30°C: 3.7 kW Useful efficiency (pci) PN – average temperature 70°C: 97.7% Nominal efficiency 50/30°C: 105.8% Seasonal space heating energy efficiency class: A Seasonal energy efficiency class of the sanitary fixture: A Water heating - Load profile: XL NOx class 6 according to EN 15502 Emission of nitrogen oxides NOx 15 mg/kWh Degree of protection: IPX5D Primary water/gas coil exchanger in AISI 316L stainless steel Secondary water/water exchanger in oversized stainless steel Electric 3-way diverter valve Modulating fan with electronic speed variation Automatic by-pass on the heating circuit Dimensions (boiler) hxwxd: 770 x 470 x 238 mm Dimensions (case) hxwxd: 1170 x 600 x 240 mm MOON AIR Luna Air is the new range of condensing boilers ideal for outdoor installations. remote digital control panel with LCD display as standard suspended installation in partially protected places open-air suspended installation with cover kit, available as an accessory minimum operating temperature: -15°C antifreeze function and IPX5D protection degree wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control built-in installation: the ultra-compact dimensions of the boiler, 770x470x238 mm, allow it to be installed in the majority of boxes on the market; recessed telescopic fittings kit available as an accessory predisposition for combination with the Baxi integrated solar system connection to Ø50 mm rigid and flexible drain pipe - for mod. 24 kW total length (exhaust+intake) 40 metres: solution for renovating flues and in case of replacement of a natural draft boiler with a condensing boiler With Luna Air it is possible to create three different installations: suspended installation in partially protected places; open-air wall-hung installation with cover kit; recessed installation with containment box Product Guarantee : All products for sale on our site are new and packed. The warranty on this product is 24 months from the date of purchase

Read more less

IMMERGAS VICTRIX EXA 24 KW METHANE CONDENSING GAS BOILER ERP COMPLETE WITH FUME EXHAUST KIT Immergas Victrix Exa 24 kW boiler Capacity: 24Kw Useful heating power kW: 23.7 DHW useful power kW: 27.7 Type: Instant Modulation range: 23 - 100 % Hot water production (∆t 30 °C) l/min: 13.2 Electrical protection degree IPX: 5D Power supply: LPG or methane Dimensions (HxWxD) mm: 763 x 440 x 300 ; 42kg VICTRIX EXA With VICTRIX EXA comes a generation of condensing boilers that offers all the advantages of condensation in maximum simplicity and economy. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. The condensing module is in stainless steel and the circulator is low consumption. The modulation range of the appliance goes from 23 to 100% of the thermal power. The user interface is simple to use, it is equipped with adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. VICTRIX EXA can also be managed from smartphones, tablets and laptops (the DOMINUS App will be available from January 2016). The casing covering the water connections is standard, to better set up the boiler inside domestic spaces. Approved to operate indoors or outdoors in a partially protected place thanks to the IPX5D degree of electrical protection, the boiler is equipped with standard frost protection down to -5 °C. VICTRIX EXA can also be used in GAUDIUM SOLAR BASE ErP systems. With reduced emissions of carbon monoxide (CO) and nitrogen oxides (NOX), VICTRIX EXA falls into class 5, the most ecological envisaged by European standards (UNI 297 and 483). The VICTRIX EXA range offers all the advantages of condensation in maximum simplicity and economy. The most compatible technology with the new European Directives and with the aim of reducing energy consumption, is presented in the most economical and effective way for many new installations and replacements of existing appliances. The VICTRIX EXA are two instantaneous boilers of 24 and 28 kW, capable of making a consistent contribution to raising the energy efficiency class in space heating and in the production of domestic hot water. Wall installation is easy both indoors and outdoors and the VICTRIX EXA range also offers the possibility of operating with propane air by choosing the dedicated conversion kit. The condensing module is in stainless steel and the circulator is low consumption, all made more comfortable and easy to install thanks to the compact dimensions. The user interface is simple to use, it features adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. The lower casing to cover the connection pipes is standard, while the connection group is optional for all models SIMPLICITY OF CONTROLS The boiler also features an advanced and easy-to-use user interface with LCD display, selection buttons and adjustment knobs. The latter allow you to make temperature adjustments quickly and easily. ECOLOGICAL BOILER VICTRIX EXA has low emissions of carbon monoxide (CO) and nitrogen oxides (NOx) such as to be included in class 5, the most ecological in the classification established by the European standards UNI EN 297 and UNI EN 483. They can therefore discharge through the wall in the cases provided for by Legislative Decree 102 of 4 July 2014. CLASS A CIRCULATOR The low-consumption circulator allows considerable savings in electricity compared to a traditional circulator and adjusts its consumption according to the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less