Technical features Declared load profile XL Nominal heat output: 24 kW Nominal heat input: 26.7 kW Continuous sanitary production: 11.5 l/min Sanitary temperature range that can be set: 40/60°C Useful thermal efficiency at nominal power: 90.0% Useful thermal efficiency at 30% nominal load: 89.4% NOx class: 3 Degree of protection: IP X4D Version: CNG Important information External installation, in a partially protected place in compliance with current legislation, Natural draft boilers programmed to be connected exclusively to multiple flues for several homes, for the escape of smoke due to combustion outside the room in which the boiler is installed. The boiler draws the combustion air directly from the installation room and is equipped with an anti-wind chimney. ZWC 24-3 MFK E, ZWC 28-3 MFK E are characteristics of wall-hung open chamber boilers with natural draft, with micro-accumulator for the production of domestic hot water. General characteristics CERACLASSEXCELLENCE is the JUNKERS boiler designed for heating and domestic hot water production. Easy to use and low consumption make it one of the best boilers to guarantee maximum comfort. Furthermore, by pressing the COM/ECO function, hot water can be managed in a simple way. Functions: Managed with Bosch Control CT100 (accessory), digital modulating room thermoregulator, with soft touch display that can be positioned on the wall, with an elegant and refined design; accompanied by a smart and functional app. Primary and secondary heat exchangers. Circulator in Energy Class A; 8 liter expansion tank (10.5 liters for ZWC 35); Dynamic microstorage tank with domestic hot water pre-heating function; Heating filling cock (in the boiler); Continuous power modulation; Bosch Heatronic 3® module, BUS system, with multifunction display; Antifreeze for the heating circuit and antiblock for the circulator; Patented passive solar optimization algorithm SolarInside-ControlUnit; Possible remote management via MB LAN or Netcom 100 modules (accessories) which can be combined with CR100 or CW thermoregulators. Dimensions (LxWxH): 370 x 400 x 850 mm; 36.6kg

Read more less

Open Chamber Boiler Riello Residence 24 KI DGT N Technical features Maximum pressure 6 Minimum pressure 0.15 Quantity of hot water at ∆t 25°C 13.7 Domestic hot water temperature selection range (± 3°C) 37-60 Minimum domestic water flow rate 2 Rated power Pnominal 24 kW At 30% of the nominal heat output and at a low temperature regime(**) P1 7.1 Declared load profile XL RESIDENCE KI DGT No RESIDENCE KI DGT N is a gas-fired wall-mounted boiler for space heating and sanitary use having a stainless steel plate exchanger. It is an electronically controlled boiler with automatic ignition, ionisation flame control, modulating heating and DHW. It has an open combustion chamber and, according to the flue gas accessory used, is classified in the B11BS category. Switching of the heating and DHW modes takes place with an electric three-way valve which is in DHW in the rest position. To ensure correct water flow in the exchanger, the boiler is equipped with an automatic by-pass; it is also complete with security, expansion and distribution accessories. The RESIDENCE KI DGT N boiler is equipped with: microprocessor management and control with visualized self-diagnosis anti-blocking circulator and three-way valve first level antifreeze (suitable for indoor installations) predisposition for room thermostat or time programmer or zone valves digital display indicating the operating temperature and fault codes. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open Chamber Boiler Hermann Saunier Duval MICRA 5 24 E Low NOx Methane - NEW ErP Product code 0010023634 Heating efficiency class C Sanitary efficiency class B Sanitary load profile XL Type Heating and domestic hot water Combustion chamber open Heating Fireplace output Qmin/max - 80/60°C (kW) 10.7 / 20.0 Rated power Pmin/max - 80/60°C (kW) 9.5 / 18.0 Min/max delivery temperature (°C) 35 / 83 Sanitary Domestic hot water production type Pre-heating Min/Max Rated Power (60°C) (kW) 9.5 / 24.0 Continuous flow - Delta-T = 25K (l/min) 13.6 Specific Flow - Delta-T = 30K (EN13203) (l/min) 11.7 Peak flow rate in 10 minutes (DT = 30K) 119 Domestic hot water temperature Min/Max (°C) 35 / 60 Electrical characteristics Electric power absorbed Max (W) 88 Dimensions Dimensions H / W / D (mm) 740 / 410 / 313 MICRA 5E Low NOx   Micra 5 E Low NOx was designed with the intention of offering Hermann Saunier Duval installers the ideal solution for replacing traditional boilers with high NOx emissions installed in branched collective flues (CCr): in fact, it features a new burner with low NOx emissions designed to reduce polluted emissions of nitrogen oxide (NOx) into the atmosphere and fully comply with the strict limits imposed by the Erp Regulation, in force since September 2018. Traditional wall-mounted boiler with low NOx emissions, combined for heating and water domestic hot water, ErP efficiency class C in heating, B in domestic hot water with XL profile. Micra 5 E Low NOx , a boiler at the top of its category in terms of consumption and polluting emissions, can feature the exclusive Aquaspeed system for the production of domestic hot water. The exclusive Aquaspeed system guarantees the immediate delivery of domestic hot water at the desired temperature: the preheating of the primary circuit and therefore also of the secondary stainless steel plate exchanger, allows an immediate response from the boiler to any sudden request from the user. Reliability and Hermann Saunier Duval standard quality Specification for branched collective rods (CCr) Low NOx emissions Aquaspeed system for high sanitary comfort Hot water immediately available with pre-heating The exclusive Aquaspeed® system guarantees the immediate delivery of domestic hot water at the desired temperature. The operation of the Aquaspeed® system is brilliant in its simplicity: the DHW exchanger is kept constantly at the set temperature; the hot water, passing through the preheated plates of the exchanger, reaches the taps already at temperature. The pre-heating, combined with the special oversized and externally insulated plate exchanger, allows an abundant quantity of domestic hot water even with low boiler temperatures. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS MAIOR NIKE 24 Kw METHANE OPEN CHAMBER GAS BOILER Technical features Energy class in heating: C; Sanitary energy class: B; Heating performance: Max nominal heat input (kcal/h) 25.9 (22,307) kW Nominal heat input min. in heating (kcal/h) 10.7 (9,185) kW Useful thermal power (min./max) (kcal/h) 9.4/23.5 (8.084/20.210) kW; Healthcare services: Nominal heat input min. in DHW (kcal/h) 8.1 (6,928) kW; Useful heat output min. in sanitary (kcal/h) 7.0 (6,020); Nominal heating expansion vessel capacity 10.0 (8.0) litres; Electrical protection degree IP X4D; Power supply: LPG. General characteristics The MAIOR NIKE boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit LCD display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Designed to meet all the needs of its customers, the Immergas meior Nike boiler respects the environment (ErP), as well as guaranteeing the functions that preserve the integrity of the generator over time, it also has the function of managing the systems with solar system, capable of delaying ignition to optimize the reading of the incoming water coming from the solar tank. This function is even more performing with the aid of the DHW inlet probe kit. Finally, to facilitate installation, it is made up of unchanged attachments to ensure that it is replaced with other instantaneous wall-hung models in the Immergas range. Dimensions (HxWxD): 785x440x340; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON CLAS EVO 28 CF EU BOILER Product code: 3300732 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: For heating and domestic hot water production Open chamber with natural draft Nominal heat input in heating max/min kW 29.5/13.0 Max/min heating thermal power (80°C-60°C) kW 26.7/11.2 Efficiency at nominal heat input % 90.6 Efficiency at 30% of nominal flow % 89.7 Performance stars (dir. 92/42/EEC) ★★★ Heating max/min temperature °C 35/ 85 Max/min domestic hot water temperature°C 36/60 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.5 Quantity of hot water ∆T=25°C litres/min 15.8 Quantity of hot water ∆T=35°C litres/min 11.3 Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 62 Degrees of protection of the electrical system IP X4D Dimensions (H x W x D) mm 770/400/315 METHANE power supply Evo class Conventional compact wall-mounted boiler with auto function The Clas Evo wall-mounted boiler is Ariston's solution for domestic comfort; it stands out for its innovative and captivating design and for its small size that makes it suitable for any type of furniture. It is available in the heating and domestic hot water production version in 2 powers: 24 and 28 kW (open chamber) Characteristics: Backlit multifunction LCD screen Continuous modulation high efficiency circulator Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Aluminum finned primary exchanger Arrangement for integration with system configuration through the new Bus Bridgnet® communication protocol Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: BOILER CANNOT BE INSTALLED IN PIEDMONT AND LOMBARDY DUE TO CURRENT REGULATIONS. NB2: IN THE ABSENCE OF THE PRODUCT, WE WILL SHIP THE THEMIS CONDENS 27 KW MODEL THIS MODEL IS USED EXCLUSIVELY TO CNG, BUT IT CAN BE CONVERTED TO LPG FREE OF CHARGE THROUGH AN AUTHORIZED SAUNIER DUVAL SERVICE CENTER Technical features Model: ErP efficiency class in heating/DHW: B/A Sanitary load profile: XL Type: Heating and domestic hot water Heating Nominal power P min/max heating 80/60°C: 12.2/24.1 kW Partial load efficiency 30% 40/30 °C %: 99.7 Sanitary Min/Max Rated Power (60°C): 12.5/24.0 kW Specific flow rate (∆T=25 K): l/min 13.8 Electrical characteristics Max power consumption: W 60 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 720 x 405 x 330 mm LPG version THEMIS CONDENS Themis Condens is the ideal condensing solution for replacing traditional wall-mounted boilers that work with high temperature radiators in apartments. The boiler has all the characteristics of simplicity in both installation and management. Themis Condens was developed to give the right comfort, both for the production of domestic hot water and to provide the ideal climate in the rooms. Specially designed for replacement in high temperature systems Small size Simplicity of management Reduced electricity consumption thanks to the instantaneous high efficiency pump Themis Condens combines the simplicity of the traditional boiler with the efficiency of condensing boilers. Themis Condens runs on methane and can be converted to run on propane. Themis Condens is available in the power of: 24kW for heating and 24kW for domestic hot water production. 27kW for heating and 27kW for domestic hot water production Characteristics: Can be installed indoors. Continuous domestic hot water (DHW) production up to 16 l/min Small dimensions: 72cm high, 40 wide and 33 deep (24 kW) The boiler features a new high-efficiency pump with high performance and a 7-litre expansion tank. ErP efficiency class B in heating, A in DHW with XL profile. Reliability and Hermann Saunier Duval standard quality Specific for high temperature systems Large passages in the primary exchanger Reduced electricity consumption thanks to the high efficiency pump Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BASIC BIASIS GAS AND 28A LPG OPEN CHAMBER BOILER - ErP Technical features Model BASIC AND 28A LPG OPEN ROOM Energy efficiency Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Performance Useful thermal power: 27.9 kW Energy efficiency stars: (dir 92/42/CEE) *** Maximum flow rate (Δt =25 °C): 16 l/min METHANE power supply Characteristics High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with BIASI solar systems using a solar kit Traditional control panel with knobs and LEDs. Dimensions hxwxd: mm 700x400x325 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON CLAS EVO 28 CF EU BOILER Product code: 3300732 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: For heating and domestic hot water production Open chamber with natural draft Nominal heat input in heating max/min kW 29.5/13.0 Max/min heating thermal power (80°C-60°C) kW 26.7/11.2 Efficiency at nominal heat input % 90.6 Efficiency at 30% of nominal flow % 89.7 Performance stars (dir. 92/42/EEC) ★★★ Heating max/min temperature °C 35/ 85 Max/min domestic hot water temperature°C 36/60 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.5 Quantity of hot water ∆T=25°C litres/min 15.8 Quantity of hot water ∆T=35°C litres/min 11.3 Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 62 Degrees of protection of the electrical system IP X4D Dimensions (H x W x D) mm 770/400/315 METHANE power supply Evo class Conventional compact wall-mounted boiler with auto function The Clas Evo wall-mounted boiler is Ariston's solution for home comfort; it stands out for its innovative and captivating design and for its small size that makes it suitable for any type of furniture. It is available in the heating and domestic hot water production version in 2 powers: 24 and 28 kW (open chamber) Characteristics: Backlit multifunction LCD screen Continuous modulation high efficiency circulator Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Aluminum finned primary exchanger Arrangement for integration with system configuration through the new Bus Bridgnet® communication protocol Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER JUNKERS CERACLASS SMART ZWA 24-2 KE METHANE OPEN CHAMBER - ErP Technical features Heating and DHW energy efficiency class: C - B Declared load profile XL Open chamber with natural draft Nominal heat output: 24 kW Useful thermal efficiency at nominal power: 89.8% Useful thermal efficiency at 30% nominal load: 89.2% Continuous sanitary production: 11.4 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 3 Degree of protection: IP X4D Power supply: methane Characteristics Bithermal heat exchanger. Control panel with Bosch Cotronic. Heating flow temperature via luminous LEDs. Continuous power modulation. Protection systems: antifreeze for the heating circuit and antiblock for the circulator. Circulator in Energy Class A. 8 liter expansion vessel. Heating filling cock (in the boiler). External installation, in a partially protected place, in compliance with current legislation. Dimensions Dimensions (Depth x Width x Height): 355x400x750 mm Weight: 33Kg Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BERETTA METEO 28 CAI AG LPG BOILER - NEW ErP 2015 Cod. 20101259, OPEN ROOM WITH NATURAL DRAFT: CAI boilers specific for outdoor use, ErP version, equipped with low consumption circulator (EEI0,20). Technical specifications Product code: 20101259 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitaryware energy efficiencyprofilXL Class B Characteristics of heating/sanitary exercises: Heating/DHW nominal heat output: 28 kW Quantity of hot water with t=25øC: 16 l/min Dimensions (hxwxd) mmÿ760 x 553ÿx 240 LPG fuel supply Legend:ÿ C (heating + sanitary water),ÿ A (Open Room) I (electronic ignition, controls ionization). AGÿAntifreeze fine series -15øC Features list ErP WEATHER ÿMeteoÿ is a complete range of specific boilers for outdoor use. The high technological contents enhance the specific characteristics to the maximum: dimensions, standard remote control panel, resistance to external agents, innovative performance. The quality of the materials and the innovative design of the shell add elegance to these extremely small and high performance boilers. Extremely reliable and simple to use, the boilers in the Metesonnate range are specifically designed for outdoor installations. The exclusive shell structure, the IPX4D electrical protection and the materials used for the coat provide maximum protection from external agents. The streamlined, modern aesthetic allows water to roll off. Installation is facilitated by reduced dimensions and supplied equipment. Designed for installations on balconies, Meteo, with a depth of only 24 cm, is the ideal answer to space problems; equipped as standard with fittings for connection to the system, gas taps and sanitary fixtures with positioning template. The remote control panel, supplied as standard, allows total control of the boiler from inside the home. The main functions are simple and immediate, with many other settingsÿcustomizable by the user. The remote control panel also functions as a chronothermostat weekly and prearranged for climate control via an external probe (optional). Characteristics: CAI boilers, ErP version, equipped with low consumption circulator (EEI0,20)ÿadjustable up to 7m headÿ MIX combustion (Air/Gas): constant performance (mod. CSI)ÿ Built with specific materials for outdoor useÿ Remote control panel REC 05ÿ as standard Exhaust adapter ÷ 60 with standard air intake (mod. CSI)ÿ Standard antigelfine -15øCÿ Electrical protection degrees IPX4Dÿ Arrangement for climatic thermoregulationÿ Plumbing fittings, gas taps and sanitary fittingsÿ For gas conversion, contact authorized Beretta Technical Assistance Centres Beretta or ERP. The concrete commitment to a sustainable future The acronym ÿErP, acronym of Energy related Products?ÿ (Products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015, the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU. The regulation provides that all products intended for heating and the production of domestic hot water with a lower rated thermal power equal to 70 kW can be placed on the market with an ÿenergy labelÿthat highlights theÿefficiency class*. Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility of identifying it facilitates the level of efficiency of a product by being able to carry out a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data reported for climatic bands. In addition to the product labels, the European regulation has provided for the creation of a "system label" in the case of manufacturing plants with various appliances, components and related controls. This second type of labelling, thanks to the virtuous synergy between the various elements, will make it possible to create systems capable of achieving levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to less than 400kW, will prevent inefficient products from being placed on the market. Also for DHW tanks there will be an obligation to respect minimum heat loss limits. For primary water tanks, these will be subject to compliance with an energy classification based on heat loss. For sanitary accumulations, up to 500 liters there will be the obligation of labeling, from 500 to 2000 liters they will be bound to respect the energy classification. For heat pumps for heating and for mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. In order to be placed on the market, gas-fired water heaters with solar heat pumps, in addition to energy labelling, will also have to comply with a series of requirements in terms of efficiency. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

GAS BOILER BERETTA EXCLUSIVE 28 CAI METHANE OPEN CHAMBER - NEW ErP Technical specifications Product code: 20095669 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitaryware energy efficiencyprofilXL Class B Characteristics of heating/sanitary exercises: Heating/DHW nominal heat output: 28 kW Quantity of hot water with t=25øC: 16 l/min Dimensions (hxwxd) mmÿ805 x 450 x 332 METHANE power supply Open chamber Features list EXCLUSIVE ErP Exclusive renews its image with a new aesthetic. Exclusive makes available a wide range, complete with instantaneous combined models, heating only and versions equipped with micro-storage tank. Exclusive equipped with an innovative electronic interface for easy and intuitive management. The SARA Booster system Exclusive integrates the SARA Booster system (Environmental Self-Regulation System) which allows the desired temperature to be reached more quickly. The SARA Booster system activates in the WINTER COMFORT position. If the room requires heat, the delivery temperature is automatically increased every 10 minutes in steps of 5°Cÿ so as to reduce the response time both with respect to Exclusive in WINTER stat and to a traditional boiler. Characteristics: CAI boilers, ErP version, equipped with low consumption circulator. Environmental Self-Regulation System (SARA Booster) Innovative simple and intuitive digital display Easy implant loading system Functions or Comfort Degrees of electrical protection IPX5D Standard thermoregulation (optional external probe) Standard hydraulic fitting cover Template, plumbing fittings, gas and sanitary fittings For gas transformation, contact the authorized Beretta Technical Assistance Centres Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

IMMERGAS MINI NIKE GAS BOILER 28 Kw LPG OPEN CHAMBER Technical features Energy class in heating: C; Sanitary energy class: B; Heating/DHW performance (): Max nominal heat input in heat/san. kW (kcal/h) 30.9 (26,571); Nominal heat input min. in heating/san. kW (kcal/h) 12.0 (10,356); useful heat output max. in heating/san. kW (kcal/h) 27.9 (23,994); Useful heat output min. in heating/san. kW (kcal/h) 10.5 (9,030); Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 13.3; pressure min. DHW circuit dynamics bar 0.3; Nominal heating expansion vessel capacity (total) liters 7.5 (4.5); Electrical protection degree IP X4D; Power supply: LPG; General characteristics The NIKE MINI boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a LED for identifying operation and any malfunction. Finally, given its great reliability not only in terms of performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Designed to meet all the needs of its customers, the Immergas Nike Mini boiler respects the environment (ErP), it has been programmed to guarantee the functions that preserve the integrity of the generator over time. The use of the product is made even more versatile thanks to the possibility of combining it with numerous system and thermoregulation optionals such as CARV2, external probe, DIM range and control unit for zone systems. Ideal for replacing old boilers in the presence of flues branched collectives. Dimensions (HxWxD): 785x450x310; Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less