Baxi Boiler Open chamber Eco5 BLUE 24 Low NOx Methane Wall-mounted gas boiler with reduced polluting emissions (NOx and CO), instantaneous production of domestic hot water with natural draft and open chamber Installation type: B11BS Nominal heat input: 26.3kW Nominal heat output: 24 kW Reduced thermal power: 10.6 kW Efficiency at 30%: 89.6% Nominal efficiency: 90.3% Seasonal space heating energy efficiency class: C Seasonal energy efficiency class of the sanitary fixture: B Water heating - Load profile: XL NOx class 6 according to EN 15502 Domestic hot water production ∆T 25°C: 13.7 l/min Dimensions HxWxD 730x400x298; 27 kgs NOx class 6 CNG power supply Supplied accessories System filling tap; System drain cock; Installation template Conventional low NOx boilers for replacement in branched collective flues The ErP/EcoDesign legislation provides that, by way of derogation, manufacturers can continue to produce and market open-chamber, low NOx boilers, only for installations in domestic contexts, with the restriction of replacement in branched collective flues. Baxi's ranges of conventional B1-type natural draft boilers are precisely designed to meet all installation requirements in branched collective flues. ECO5 Blue NEW Conventional low NOx boilers for replacement in branched collective flues Low NOx emissions: class 6 according to EN 15502 Compact dimensions 730x400x298 mm Control panel with multifunction LCD display Arrangement for combination with the Baxi integrated solar system Product plus Control panel equipped with LCD display, programming and adjustment keys. Climatic regulation function (with optional external probe) integrated in the control panel Continuous electronic flame modulation Electronic ignition with flame ionization control Degree of protection: IPX5D Water cooled low NOx burner Primary water/gas exchanger made of copper pipes inserted in a lamellar coil protected by an anticorrosive alloy Secondary water/water exchanger in stainless steel Electric 3-way diverter valve Automatic by-pass on the heating circuit Pressure gauge on the heating circuit Expansion tank with 6 l capacity, preloaded at 0.5 bar ErP high efficiency circulation pump with built-in deaerator Turbine DHW flowmeter for detecting hot water withdrawal DHW operation with minimum water pressure of 0.15 bar and minimum flow rate of 2 l/min Inspectable filter on the sanitary water inlet Primary circuit safety valve at 3 bar Two heating water temperature adjustment ranges: 30÷45°C and 30÷85°C Sanitary water temperature adjustment range: 35÷60°C Minimum operating temperature: - 5°C Dimensions HxWxD: 73 x 40 x 30cm Control and security system Temperature control using NTC probes Pump post-circulation in the heating and DHW function Safety thermostat against overheating of the primary exchanger Hydraulic pressure switch which blocks the gas in case of water shortage Pump electronic control blocked Pump anti-blocking system and 3-way valve which intervenes every 24 hours Safety thermostat for checking the correct evacuation of fumes Total antifreeze device which intervenes with temperatures below 5°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ariston CARES S 24 EU condensing boiler complete with methane or low NOx LPG fume exhaust kit 3301637 - NEW Heating energy class A Sanitary energy class A XL load profile Nominal heat input max min heating 20.0/4.7 kW Nominal max min DHW heat input 23.5/4.7 kW Heating temperature max min 82 / 35 °C Quantity of hot water deltaT=25°C 13.2 litres/min Power frequency voltage 230/50 V/Hz Electrical protection degree X5D IP NOx class 6 CARES S The condensing boiler suitable for every need, able to combine great performance and high robustness. Thanks to the stainless steel condensing exchanger, CARES S represents the right balance between comfort and performance. Reduction of energy consumption up to 35% Stainless steel condensing exchanger More robust design thanks to the new metal front panel Better accessibility thanks to the front hydrometer MADE IN ITALY produced entirely in Italy SMALL SIZE small footprint for easy installation SYSTEM MANAGEMENT new communication protocol set up to guarantee complete management of the system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia a Camera Aperta Ariston HS X 24 CF Low NOx Metano  - NOVITA' Classe di efficienza energetica in riscaldamento C Classe energetica in Sanitario B Profilo di carico XL Portata termica nominale max/min kw 25,8 / 11,0 Potenza termica utile max/min kw 23,2 / 9,8 Portata termica nominale max/min (sanitario) PCI 27/11,0 kW Portata acqua calda a ΔT 25º C 14,2 l/min Basse emissioni di NOx < 56 mg/kWh Tensione di alimentazione 230 V~ (50 Hz) Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400x315 mm Nuova HS XLa nuova caldaia Ariston HS-X lascia il tradizionale termostato ambiente e può funzionare con sonde di temperatura interne ed esterne. Preparato per la termoregolazione. Queste esclusive periferiche di termoregolazione di Ariston consentono un ulteriore risparmio di gas del 15%, offrendo una maggiore stabilità a temperatura ambiente. Pronta per l'uso con energia solare termica in acqua calda sanitaria. Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Basse emissioni di NOx < 56 mg/kWh Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

NB: THE BOILER IS BORN WITH METHANE, FOR THE TRANSFORMATION TO LPG, YOU MUST CONTACT THE AREA ASSISTANCE CENTER IN ADVANCE TO KNOW THE RELATED COSTS Chaffoteaux boiler INOA ULTRA 25 CF Open chamber low NOx cod. 3310639 - NEW ErP Technical Characteristics : Rated heat output max/min (Hi) Qn 25.8 / 11.0 kW Useful heating power max/min 23.2 / 9.8 kW Efficiency at nominal power 60/80 Hi 90.1% Efficiency at 30% of nominal power (47 Hi return) 89.9% Outlet temperature range min/max temp. 35-82°C Expansion tank capacity 8l Domestic hot water DHW comfort level (EN 13203) ** Max/min power in DHW mode 24.3 / 9.9 kW Specific flow rate in accordance with EN 625 at ΔT 30º C 11.8 l/min Hot water flow rate at ΔT 25º C 14.2 l/min Electrical data Supply voltage 230 V~ (50 Hz) Maximum absorbed power 52W Electrical protection degree IP X4D Dimensions HxWxD 745x400 x319 mm; 25 kgs INOA ULTRA 25 CF Inoa Ultra, equipped with multifunction LCD display. it contains in its simplicity all the technical characteristics necessary for optimal operation, guaranteeing reliable, practical and safe performance. Low NOx emissions: compliant with the Erp regulation of 09.26.2018 HEALTHCARE COMFORT Sanitary heat exchanger in stainless steel. Flow rate of 14.2 l/min with Δ=25°C. DHW circuit managed by two probes and a DHW flowmeter for better temperature stability based on the type of sampling. HEATING COMFORT High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Heating power of 25 kW. COMFORT OF USE AND INSTALLATION LCD display with display: history, self-diagnosis, operating temperature. Antifreeze function. Compact and perfectly adaptable to any type of home. Quick installation: predisposition for the use of the hydraulic bar (optional). Simplified maintenance: front access to all components. Prepared for integration with solar thermal systems. Prepared for on/off environmental regulation with and without wires. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Baxi Boiler Open chamber Eco5 BLUE 24 Low NOx LPG Wall-mounted gas boiler with reduced polluting emissions (NOx and CO), instantaneous production of domestic hot water with natural draft and open chamber Installation type: B11BS Nominal heat input: 26.3kW Nominal heat output: 24 kW Reduced thermal power: 10.6 kW Efficiency at 30%: 89.6% Nominal efficiency: 90.3% Seasonal space heating energy efficiency class: C Seasonal energy efficiency class of the sanitary fixture: B Water heating - Load profile: XL NOx class 6 according to EN 15502 Domestic hot water production ∆T 25°C: 13.7 l/min Dimensions HxWxD 730x400x298; 27 kgs NOx class 6 LPG supply Supplied accessories System filling tap; System drain cock; Installation template Conventional low NOx boilers for replacement in branched collective flues The ErP/EcoDesign legislation provides that, by way of derogation, manufacturers can continue to produce and market open-chamber, low NOx boilers, only for installations in domestic contexts, with the restriction of replacement in branched collective flues. Baxi's ranges of conventional B1-type natural draft boilers are precisely designed to meet all installation requirements in branched collective flues. ECO5 Blue NEW Conventional low NOx boilers for replacement in branched collective flues Low NOx emissions: class 6 according to EN 15502 Compact dimensions 730x400x298 mm Control panel with multifunction LCD display Arrangement for combination with the Baxi integrated solar system Product plus Control panel equipped with LCD display, programming and adjustment keys. Climatic regulation function (with optional external probe) integrated in the control panel Continuous electronic flame modulation Electronic ignition with flame ionization control Degree of protection: IPX5D Water cooled low NOx burner Primary water/gas exchanger made of copper pipes inserted in a lamellar coil protected by an anticorrosive alloy Secondary water/water exchanger in stainless steel Electric 3-way diverter valve Automatic by-pass on the heating circuit Pressure gauge on the heating circuit Expansion tank with 6 l capacity, preloaded at 0.5 bar ErP high efficiency circulation pump with built-in deaerator Turbine DHW flowmeter for detecting hot water withdrawal DHW operation with minimum water pressure of 0.15 bar and minimum flow rate of 2 l/min Inspectable filter on the sanitary water inlet Primary circuit safety valve at 3 bar Two heating water temperature adjustment ranges: 30÷45°C and 30÷85°C Sanitary water temperature adjustment range: 35÷60°C Minimum operating temperature: - 5°C Dimensions HxWxD: 73 x 40 x 30cm Control and security system Temperature control using NTC probes Pump post-circulation in the heating and DHW function Safety thermostat against overheating of the primary exchanger Hydraulic pressure switch which blocks the gas in case of water shortage Pump electronic control blocked Pump anti-blocking system and 3-way valve which intervenes every 24 hours Safety thermostat for checking the correct evacuation of fumes Total antifreeze device which intervenes with temperatures below 5°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON GAS BOILER model CLAS X 28 CF METHANE Low NOx OPEN CHAMBER Technical features. Product code: 3301314 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications Rated heat input max/min (heating) PCI: 29.5-13kW Nominal heat input max/min (sanitary) PCI: 29.5-13 kW Max/min useful heat output (heating): 26.6-11.6kW Efficiency at nominal heat input PCI: 90.2% Efficiency at 30% of nominal flow rate PCI: 90.3% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 13.2 litres/min Quantity of hot water (ΔT=25°C): 15.8 l/min Quantity of hot water (ΔT=35°C): 11.3 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 52,1W Degree of protection of the electrical system IP X4D Dimensions mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Functionality AUTO, Comfort functions Internal, installation in branched collective pipe with natural draft Characteristics LCD display Continuous modulation high efficiency circulator Prepared for Ariston Net connectivity Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Copper finned primary exchanger Cold water inlet and heating return filters Low NOx emissions < 56 mg/kWh Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open Chamber Boiler Beretta CIAO LX 24 CAI Low NOx LPG 20151437 - NEW Technical features Model: CIAO LX 24 CAI gpl Code: 20151437 Heating/DHW nominal heat input: 26.70 kW Heating/DHW nominal thermal power: 24.06 kW Efficiency at nominal power: 90.1 Efficiency at reduced load (30%): 89.2% NOx class 6 Maximum working pressure heating bar 3 Maximum absorbed electrical power W 47 Quantity of hot water deltaT 25C° 13.8 l/min Dimensions HxWxD 740x400x340 HELLO LX Beretta has renewed the Ciao open flue boiler; the previous model Ciao S CAI now becomes Ciao LX CAI and is placed in Class NOX 6 . Aesthetically it looks like the previous one but its technology is now completely different. The Ciao LX CAI is the entry-level model for approaching Beretta boiler technology; the CAI model has an open chamber and natural draft. The adjectives that identify it are: high quality standard, sturdiness, reliability and economy in purchasing and running. The innovative Double Exchanger is very compact and is of the plate type with the possibility of preheating . It also uses a low consumption Synchronous Circulator (EEI=0.20) with anti-block cycle system and 3-way valve; it is equipped with a smoke control thermostat and by-pass on the heating circuit. Beretta Ciao has a simple, modern and elegant line; the front panel, the real brain of the boiler, is equipped with many functions. Ciao LX CAI is designed to be installed outdoors in partially protected places, thanks to the dedicated accessories and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit together with the siphon antifreeze heater kit (optional to be requested separately from the Beretta Technical Assistance Centre). A convenient liquid crystal digital display for viewing the temperature and diagnostic codes, the on/off/summer/winter/reset/heating temperature/ Amico Climate System selector, the domestic hot water temperature selector/pre-heating activation, the Hydrometer. The wall water fittings, the sanitary taps and the gas tap are not included in the package. GUARANTEED SAVINGS AND HIGH COMFORT Gas consumption is always very low . This new version complies with the new standards on combustion gas emissions (NOx 6) e the ErP Directive 2015 ; the boiler benefits from Energy Classes C in Heating and B in Sanitary . It all starts with savings, starting from the purchase price up to consumption management. Maximum comfort with minimum cost. TECHNICAL FEATURES Class B/C NOx class 6 - ErP version, equipped with 6 m low consumption circulator Double exchanger: primary and sanitary plate with the possibility of preheating 8 liter expansion vessel Arrangement for climatic thermoregulation (optional external probe to be purchased through CAT) IPX5D electrical protection degree Optional plumbing fittings, gas and sanitary taps 3-way valve with anti-block cycle system Smoke control thermostat By-pass on the heating circuit Electronic board with self-diagnostic function and antifreeze protection Simple and intuitive digital display Selector on/off/summer/winter/reset/heating temperature/activation of the Clima Amico system Domestic hot water temperature selector/pre-heating activation Hydrometer Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Open Chamber boiler mod. START 24 KI Low NOx - NEW ErP CODE 20151434 Product code: 20151434 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.7 kW Heating/DHW nominal heat output: 24 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°): 90.1-86.4% Profit return 30% (47th return): 89.2% Open chamber with natural draft NOx class: 6 Min/max heating operating pressure: 0.25-3 bar Max absorbed electric power: 47 W Expansion vessel: 8 litres Min/max pressure in DHW: 0.15-8 bar Quantity of hot water with Δt 25°C: 13.8 l/min Quantity of hot water at Δt 30°C: 11.5 l/min Quantity of hot water at Δt 35°C: 9.9 l/min Sanitary water temperature selection range: 37-60°C Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs Electrical protection degree: IP X5D Power supply: METHANE Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Open Chamber boiler mod. START 28 KI Low NOx - NEW ErP CODE 20151435 Product code: 20151435 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Thermal input: 31.90 kW Thermal power (80-60°C): 28.87 kW Reduced heat input: 14.00 kW Reduced thermal power (80-60°C): 12.36 kW Thermal input: 31.90 kW Reduced heat input: 9.00 kW Reduced thermal power: 7.95 kW Minimum operating pressure: 0.25-0.45 bar Quantity of hot water with Δt 25°C: 16.6 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37-60°C Flow regulator: 10 l/min NOx class: 6 Dimensions HxWxD 450x332x740 mm; Weight: 30 Kg Natural gas supply START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for a quicker achievement of the desired comfort and a reduction in consumption, and in the temperature ranges in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BERETTA WALL-MOUNTED BOILER Open chamber MYNUTE 24 CAI LX Low Nox 24 kw CNG cod. 20151436 Mynute LOW NOX Nominal heat input kW 25.80 Nominal thermal power (80 - 60 °C) kW 24.05 Reduced thermal power (80 - 60 °C) kW 11.28 Reduced heat input kW 12.5 Electric power Watt 115 Supply voltage / frequency Volt/Hz 230 / 50 Electrical protection degree IP X5D Useful efficiency at Pn max ((80 - 60 °C) % 93.2 Useful efficiency at 30% of Pn (47 °C return) % 91.8 POLLUTANT EMISSIONS (G20) NOx according to UNI EN 483 class 5 HEATING EXERCISE Maximum pressure and temperatures bar/°C 3 / 90 Heating temperature selection range °C 40 / 80 Pump: pump head available for the system mbar 275 at a flow rate of 1000 litres/h Expansion vessel capacity 9 litres HEALTHCARE EXERCISE Maximum pressure 6 bar Minimum pressure bar 0.15 Quantity of hot water with ∆t=25°C litres/min 14 Minimum domestic water flow rate litres/min 2 DHW temperature selection range °C 37 - 60 CONNECTIONS Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” COAXIAL FUME EXHAUST AND AIR INTAKE PIPES Diameter mm 60 - 100 Maximum length 2.5 m Loss for inserting a 90° / 45° bend m 1.5 / 1 SEPARATE FUME EXHAUST AND AIR INTAKE PIPES Diameter mm 80 + 80 Maximum length m 14 + 14 Loss for inserting a 90° / 45° bend m 1.7 / 1.2 DIMENSIONS, WEIGHT, GAS Boiler size (HxLxP) mm 780x400x338 Weight kg 35 Wall mounted boiler Beretta MYNUTE 24 CAI LX natural draft open instant combined methane Heating capacity 24kW and DHW (l/min-?t 25°C) 14, with low Nox emissions, specifically designed to facilitate the replacement of pre-existing wall boilers, Simple and intuitive digital display. Technical features: New boilers with low NOx emissions Low consumption circulator (EEI?0.20) as standard Specifically designed to facilitate the replacement of pre-existing wall-mounted boilers 9 liter expansion tank Simple and intuitive digital display Predisposition for climatic thermoregulation (optional external probe)Predisposition for connection to the BeSMART Comfort control (code 20143539) IPX5D electrical protection degree Plumbing fittings, gas and sanitary taps (optional) The ecological burner To reach high standards Mynute Low NOx is equipped with a special atmospheric burner, cooled and equipped with nozzles in number superior, which allows the specification premixing of gas and air. In this how combustion occurs a temperatures lower than usual in a traditional burner. The burner consists of a surface on the which develops the high flame few millimeters, also called "microflame". The tube that passes through the burner with the return water from the system heating promotes cooling of the burner surface. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

nb: LPG conversion kit supplied as standard Ariston CARES S 30 EU condensing boiler complete with flue gas exhaust kit Methane or LPG low NOx 3301638 - NEW Heating energy class A Energy class A for sanitary facilities XL load profile Nominal heat output max min heating 24.0/5.8 kW kW Nominal thermal capacity max min sanitary 29.0/5.8 kW kW Heating temperature max min 82 / 35 °C Quantity of hot water deltaT=25°C 16.0 litres/min Power supply voltage frequency 230/50 V/Hz Electrical protection grade X5D IP NOx class 6 CARES S The condensing boiler suitable for every need, able to combine great performance and high robustness. Thanks to the stainless steel condensing exchanger, CARES S represents the right balance between comfort and performance. Reduction of energy consumption up to 35% Stainless steel condensing exchanger More robust design thanks to the new metal front panel Better accessibility thanks to the front hydrometer MADE IN ITALY produced entirely in Italy SMALL SIZE small footprint for easy installation SYSTEM MANAGEMENT new communication protocol designed to ensure complete management of the system. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

NB THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Riello Open Chamber boiler mod. START 24 KI Low NOx - NEW ErP CODE 20151434 Product code: 20151434 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.7 kW Heating/DHW nominal heat output: 24 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°): 90.1-86.4% Profit return 30% (47th return): 89.2% Open chamber with natural draft NOx class: 6 Min/max heating operating pressure: 0.25-3 bar Max absorbed electric power: 47 W Expansion vessel: 8 litres Min/max pressure in DHW: 0.15-8 bar Quantity of hot water with Δt 25°C: 13.8 l/min Quantity of hot water at Δt 30°C: 11.5 l/min Quantity of hot water at Δt 35°C: 9.9 l/min Sanitary water temperature selection range: 37-60°C Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs Electrical protection degree: IP X5D Power supply: METHANE Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less