Regulate the temperature of the rooms with Fan Coil fan coils. Quiet, efficient and aesthetically pleasing. Choose from our selection of Fan Coils for optimal comfort and uniform air distribution in every room.
Fan coil units
Innova Fan Coil Fan Coil Innova Airleaf Dc Inverter Sl400c
NB: PRODUCT AVAILABLE ON ORDER Fan coil convector Fan Coil INNOVA AirLeaf DC Inverter SL400C Model: SL400C DC Inverter Energy efficiency: Total cooling capacity Total cooling capacity kW 1.77 Water flow rate L/h 304 Water flow rate (45/40 °C) Water flow rate (45/40 °C) L/h 374 Heating capacity with water 70/60 °C Heating capacity (water 70/60 °C) kW 3.99 Hydraulic characteristics Coil water content Water coil content L 0.8 Maximum operating pressure bar 10 Hydraulic connections Inch Eurokonus 3/4 Performance: Sound power at maximum airflow dB(A) 51 Sound pressure at maximum airflow dB(A) 42 Sound pressure at medium airflow dB(A) 34 Electrical data Supply voltage Power voltage V/ph/Hz 230/1/50 Maximum absorbed electrical power Maximum power consumption W 19 Maximum absorbed current Maximum current input A 0.16 Dimensions: Dimensions (WxHxD) mm 935x579x129 (without feet) NB: For the version with connection on the right, the article Motor connection cable must be added for moving the hydraulic connections from left to right (it can only be fitted in the factory) it can only be fitted in the factory THE CONTROL PANEL IS NOT INCLUDED AND HAS TO BE PURCHASED SEPARATELY AirLeaf INNOVA FAN COILS: HOT IN WINTER, COOL IN SUMMER, IN THE MAXIMUM SILENCE, WITH AN EXCLUSIVE DESIGN! AirLeaf Inverter DC is the fan coil that contains the best solution for heating , cooling and dehumidification in a single device. It allows to reach very high energy efficiencies due to the possibility of being coupled with low temperature heat generators such as: heat pumps , condensing boilers and integrated systems with solar collectors. Thanks to a sophisticated temperature regulator, AirLeaf guarantees excellent thermal comfort in every season. It heats and cools extremely quickly and once the desired temperature is reached, it maintains it with great precision in complete silence. In heating, AirLeaf develops an effective natural convection effect (similar to that of a radiator) which considerably reduces the need to activate the ventilation. Its harmonious design and the extraordinarily reduced depth of only 13 centimeters make it integrable in any type of environment for any furnishing requirement. The depth of 129 mm is obtained thanks to an innovative design. The fan is tangential with asymmetrical blades and the exchanger has a large frontal surface, thus obtaining high air flows with low pressure drops and very quiet operation. Efficiency is very high with energy consumption of a few Watts. The fan speed is no longer "in steps" but continuously modulated with proportional and integrative logic: this reduces both noise and annoying air movements. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€341,00
-
Climaveneta Climaveneta Professional Fan Coil Fan Coil Model A-Life3 902 Version 2 Pipes From 5.97 No Command
Technical features Model : a-LIFE3 202 Power supply (V/Hz/n°) : 230/50/1 White color Indoor Unit Power: 5.9 kW Number of Pipes : 2 NB : The control is not included in the package, it is available as an accessory. General characteristics The a-LIFE3 fan coil is designed to adapt to any environment thanks to a modern and discreet design that concentrates all the experience and know-how of Mitsubishi Electric Hydronic & IT Cooling Systems SPA in this family of products. Double suction centrifugal fan unit and 6 selectable speed autotransformer. Thanks to the availability of various versions, cabinet or built-in, with front or bottom air intake, for horizontal and vertical installations, it is easy to identify the optimal solution for every need. ClimaVeneta Fancoil a-LIFE3-2T-DLMV-102 for professional applications of 1.41 kW in the 2-pipe version with cabinet, with lower air intake, for vertical installation. This fan coil unit is equipped with a centrifugal-type fan assembly with double suction and forward-facing blades with 3 speeds. The left hydraulic connections are easily convertible into right connections with a simple rotation of the exchanger. The class G2 air filter is fitted on all models, whose cover is in galvanized and pre-painted sheet metal. Characteristics Centrifugal type fan unit with double intake to ensure the best performance with the lowest noise level. Directly coupled multi-speed electric motor 6-speed autotransformer Coil with corrugated aluminum fins and copper tubes. Coil with large frontal surface which allows to reach high air flows with very low pressure drops. Hydraulic connections on the left, easily convertible into connections on the right with a simple rotation of the exchanger. Auxiliary condensate collection tray with thermal insulation, in galvanized sheet metal, for all horizontal versions. Auxiliary condensate collection tray in plastic material, for all versions. Configurations for 2 and 4 pipe systems. Air filter on all models. Automatic closing of the control door and protection of the electric controls from possible water falls (compliant with directive CEI EN 60335-2-40). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€438,00 - €570,00
-
Carrier Concealed Fan Coil Fan Coil Carrier Idrofan 42nfs15f
IDROFAN 42NFS15F Carrier built-in Fan Coil fan coil Cooling capacity: 1.49 kW Heating capacity: 2.09 kW Electric resistance (high capacity) W 800 Electric resistance (low capacity) W 500 Dimensions WxD: 830 x 220 Height (with 100mm feet): 657 CARRIER Energy efficiency is the class of its success. The range of IDROFAN 42N fan coil units fits perfectly with the new reference requirements for buildings with low energy consumption, offering greater energy savings and immediate comfort for users. Its success is essentially due to low energy consumption and construction features based on modularity, ease of installation and reliability. Reducing CO2 emissions into the atmosphere by 20% by 2020 is a goal that IDROFAN already achieved a few years ago. IDROFAN is designed to maximize efficiency and savings, through the use of more flexible technologies aimed at protecting the natural environment. The new range of IDROFAN 42N fan coils is the ideal solution for multiple applications, such as hotels, offices and commercial buildings, allowing you to optimize comfort and reduce energy costs The choice of installation is yours Carrier offers various solutions to optimize the installation space and the environment to be air conditioned. Units for installation in false ceilings or console units with cabinet or built-in are available, to satisfy any type of aesthetic requirement and interior configuration. Silent The high performance fan of the IDROFAN range incorporates the latest technology of LEC motors, variable speed, or five speeds, improving user comfort thanks to a noise level reduction of up to -10 dB(A) compared to previous models. The LEC variable speed motor coupled to the latest generation NTC electronic control, the almost imperceptible air flow and the fan speeds that can be customized on site, ensure the best comfort and ultra-quiet operation. Optimal air quality Indoor air quality is essential to the well-being of people living in a building, as well as being fundamental to their health. IDROFAN is equipped with an optional G3 filter which retains between 80 and 90% of particles larger than 1μm. Attractive in any setting With its sober and elegant lines, IDROFAN also satisfies the expectations of architects. Available in the version for recessed installation in false ceilings or as a console unit with cabinet for visible installation, IDROFAN blends into any interior environment and ensures maximum comfort for the occupants, both in the case of new and renovated buildings. Cheaper engines Variable speed LEC (Low Energy Consumption) motors reduce the energy consumption of the fan coil units by 50% to 70%. This option allows you to meet the requirements of the regulations on the control of energy consumption in buildings. LEC motors include self-adaptive airflow control from 0 to 100% to ensure individual comfort levels in both heating and cooling modes Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€174,00
-
Carrier Fan Coil Fan Coil Carrier Idrofan 42nms30fa Type ''A'' Command On Board
IDROFAN 42NMS30FA Fan Coil Carrier Fan Coil Unit ''A'' type command on board Vertical console with cabinet Cooling capacity: 3.7 kW Heating capacity: 5.29 kW Electric resistance (high capacity) W 2000 Electric resistance (low capacity) W 1000 Dimensions WxD: 1230 x 220 Height (with 100mm feet): 657 Weight: 22Kg CARRIER Thanks to its simple and elegant design (winner of the ADI Design award) it is the ideal solution for many applications, such as hotels, offices and commercial buildings. Maximum optimization of comfort and reduction of energy costs. Available in the built-in version for installation in false ceilings or with cabinet for visible installation (only 220 mm in height for the built-in unit). Both in the version with high-efficiency variable-speed LEC (brushless) motors and with multispeed AC motor, it allows you to promptly respond to the need for comfort, efficiency and versatility. A variety of thermostats and controls are available either on board or remote for wall installation Energy efficiency is the class of its success The range of IDROFAN 42N fan coil units fits perfectly with the new reference requirements for buildings with low energy consumption, offering greater energy savings and immediate comfort for users. Its success is essentially due to low energy consumption and construction features based on modularity, ease of installation and reliability. Reducing CO2 emissions into the atmosphere by 20% by 2020 is a goal that IDROFAN already achieved a few years ago. IDROFAN is designed to maximize efficiency and savings, through the use of more flexible technologies aimed at protecting the natural environment. The new range of IDROFAN 42N fan coils is the ideal solution for multiple applications, such as hotels, offices and commercial buildings, allowing you to optimize comfort and reduce energy costs The high performance fan of the IDROFAN range incorporates the latest technology of LEC motors, variable speed, or five speeds, improving user comfort thanks to a noise level reduction of up to -10 dB(A) compared to previous models. The LEC variable speed motor coupled to the latest generation NTC electronic control, the almost imperceptible air flow and the fan speeds that can be customized on site, ensure the best comfort and ultra-quiet operation. Reduced consumption facilitate compliance with new laws regarding energy consumption Maximum flexibility minimum size and wide range of powers for any installation and climate Perfect integration and low noise impact with any building management system Improved comfort thanks to advanced technologies that guarantee silence and well-being Accessories TYPE "A" Electronic Thermostat Control for IDROFAN 2-pipe fan coils, 42N series, wall-mounted, CARRIER ( Code 33TA-AC01) Kit for installation of type "A" control on board the 42NM/Z unit (Cod. 42N9100) The TYPE "A" CARRIER control is suitable for controlling IDROFAN convectors in both heating and cooling modes. With: Power button for switching on/off the fan coil; Mode button for manual adjustment of the heating/cooling functions indicated by special red/blue LEDs; Ventilation Adjustment Button with the 3 Speeds (I-II-III) that can be set manually, the Economy mode for energy saving and the Auto mode, all signaled from time to time by special LEDs; Temperature Selector Knob with a range from + 10°C. at + 30°C. Antifreeze function which is activated with temperatures below 7°C., Night and Dimming mode which acts on the lights of the operating LEDs, AutoTest , possibility of configuring the adjustments during installation using special microswitches, possibility of using the internal temperature sensor in case of wall installation or a remote sensor - Minimum Temperature Probe in case of installation on the machine (to be purchased separately) . The CARRIER Type "A" Control can be installed on the fan-coil using the special Kit for installing the Type "A" Control on the 42NM/Z unit ( allows connection of the Control to the electrical components of the fan coil and consists supplied by: cable kit, air probe, bracket, adhesive bands, screws ) Code 42N9100. Controls the fan coil in both the heating and cooling functions where the system is set up for this type of function. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€289,00
-
Climaveneta Climaveneta Professional Fan Coil Fan Coil Model A-Life3 702 Version 2 Pipes From 4.78 No Control
Technical features Model : a-LIFE3 202 Power supply (V/Hz/n°) : 230/50/1 White color Indoor Unit Power: 4.7 kW Number of Pipes : 2 NB : The control is not included in the package, it is available as an accessory. General characteristics The a-LIFE3 fan coil is designed to adapt to any environment thanks to a modern and discreet design that concentrates all the experience and know-how of Mitsubishi Electric Hydronic & IT Cooling Systems SPA in this family of products. Double suction centrifugal fan unit and 6 selectable speed autotransformer. Thanks to the availability of various versions, cabinet or built-in, with front or bottom air intake, for horizontal and vertical installations, it is easy to identify the optimal solution for every need. ClimaVeneta Fancoil a-LIFE3-2T-DLMV-102 for professional applications of 1.41 kW in the 2-pipe version with cabinet, with lower air intake, for vertical installation. This fan coil unit is equipped with a centrifugal-type fan assembly with double suction and forward-facing blades with 3 speeds. The left hydraulic connections are easily convertible into right connections with a simple rotation of the exchanger. The class G2 air filter is fitted on all models, whose cover is in galvanized and pre-painted sheet metal. Characteristics Centrifugal type fan unit with double intake to ensure the best performance with the lowest noise level. Directly coupled multi-speed electric motor 6-speed autotransformer Coil with corrugated aluminum fins and copper tubes. Coil with large frontal surface which allows to reach high air flows with very low pressure drops. Hydraulic connections on the left, easily convertible into connections on the right with a simple rotation of the exchanger. Auxiliary condensate collection tray with thermal insulation, in galvanized sheet metal, for all horizontal versions. Auxiliary condensate collection tray in plastic material, for all versions. Configurations for 2 and 4 pipe systems. Air filter on all models. Automatic closing of the control door and protection of the electric controls from possible water falls (compliant with directive CEI EN 60335-2-40). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€397,00 - €536,00
-
Carrier Fan Coil Carrier Idrofan 42nms 26f
Fan Coil Carrier IDROFAN 42NMS 26F Vertical console with cabinet Cooling capacity: 3.6 kW Thermal capacity: 4.38 kW Electric resistance (high capacity) W 2000 Electric resistance (low capacity) W 1000 Dimensions WxD: 1030 x 220 Height (with 100mm feet): 657 Weight: 19Kg CARRIER Thanks to its simple and elegant design (winner of the ADI Design award) it is the ideal solution for many applications, such as hotels, offices and commercial buildings. Maximum optimization of comfort and reduction of energy costs. Available in the built-in version for installation in false ceilings or with cabinet for visible installation (only 220 mm in height for the built-in unit). Both in the version with high-efficiency variable-speed LEC (brushless) motors and with multispeed AC motor, it allows you to promptly respond to the need for comfort, efficiency and versatility. A variety of thermostats and controls are available either on board or remote for wall installation Energy efficiency is the class of its success The range of IDROFAN 42N fan coil units fits perfectly with the new reference requirements for buildings with low energy consumption, offering greater energy savings and immediate comfort for users. Its success is essentially due to low energy consumption and construction features based on modularity, ease of installation and reliability. Reducing CO2 emissions into the atmosphere by 20% by 2020 is a goal that IDROFAN already achieved a few years ago. IDROFAN is designed to maximize efficiency and savings, through the use of more flexible technologies aimed at protecting the natural environment. The new range of IDROFAN 42N fan coils is the ideal solution for multiple applications, such as hotels, offices and commercial buildings, allowing you to optimize comfort and reduce energy costs The high performance fan of the IDROFAN range incorporates the latest technology of LEC motors, variable speed, or five speeds, improving user comfort thanks to a noise level reduction of up to -10 dB(A) compared to previous models. The LEC variable speed motor coupled to the latest generation NTC electronic control, the almost imperceptible air flow and the fan speeds that can be customized on site, ensure the best comfort and ultra-quiet operation. Reduced consumption facilitate compliance with new laws regarding energy consumption Maximum flexibility minimum size and wide range of powers for any installation and climate Perfect integration and low noise impact with any building management system Improved comfort thanks to advanced technologies that guarantee silence and well-being Accessories TYPE "A" Electronic Thermostat Control for IDROFAN 2-pipe fan coils, 42N series, wall-mounted, CARRIER ( Code 33TA-AC01) Kit for installation of type "A" control on board the 42NM/Z unit (Cod. 42N9100) The TYPE "A" CARRIER control is suitable for controlling IDROFAN convectors in both heating and cooling modes. With: Power button for switching on/off the fan coil; Mode button for manual adjustment of the heating/cooling functions indicated by special red/blue LEDs; Ventilation Adjustment Button with the 3 Speeds (I-II-III) that can be set manually, the Economy mode for energy saving and the Auto mode, all signaled from time to time by special LEDs; Temperature Selector Knob with a range from + 10°C. at + 30°C. Antifreeze function which is activated with temperatures below 7°C., Night and Dimming mode which acts on the lights of the operating LEDs, AutoTest , possibility of configuring the adjustments during installation using special microswitches, possibility of using the internal temperature sensor in case of wall installation or a remote sensor - Minimum Temperature Probe in case of installation on the machine (to be purchased separately) . The CARRIER Type "A" Control can be installed on the fan-coil using the special Kit for installing the Type "A" Control on the 42NM/Z unit ( allows connection of the Control to the electrical components of the fan coil and consists supplied by: cable kit, air probe, bracket, adhesive bands, screws ) Code 42N9100. Controls the fan coil in both the heating and cooling functions where the system is set up for this type of function. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€221,00
-
Aermec Aermec Fan Coil Fan Coil Mod. FCZ-A 100 With Switch Included Heating Only
COMPLETE WITH SWITCH FAN COIL FAN COIL AERMEC model FCZ-A 100 with control included heating only Technical features version with switch Heating version Dimensions with feet (HxWxD): 586 x 640 x 220 (mm) Weight without feet: 13 kg White color - Coat RAL 9003 - Headboard and Plinths RAL 7047 General characteristics Aermec FCZ fan coils Taking advantage of the exceptional experience gained with fan coil units, Aermec presents the new FCZ series where elegant design marries state-of-the-art performance in terms of sound level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any requirement. FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations according to the installation position, with the possibility also of being ducted. They are characterized by multi-speed motors coupled to ABS fans with an impeller equipped with airfoil fins and an inspectable auger. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4-row coil can have an additional 1 or 2-row secondary coil for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with smartphone. FCZ are compatible with the VMF management system. (Features vary by model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: RAL9003 shell, RAL 7047 head Three speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille closes, the fan coil switches off automatically Low pressure drop in the heat exchange coils Ease of installation and maintenance G2 class air filter for all versions, easy to remove and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Extractable and inspectable augers for easy and effective cleaning Reversibility of the water connections during installation only for units with main, standard or oversized coil (Non-reversible for units with secondary coil). In the units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil to set the operating modes and the weekly time programming. Using the graphical interface of the App, it is also possible to access numerous other information such as the alarm list, the nearest satellite, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€235,00
-
OLIMPIA SPLENDID Fan Coil Fan Coil Olimpia Splendid Inverter Model Bi2 Sl Air 800 With Tr Control Included Code 01854
Technical features Product code 01854 Total cooling output (a) (E) kW 3.29 Water flow rate (a) l/h 573 Battery water content l 1.46 Maximum working pressure 10 bar Eurocone 3/4 inch hydraulic connections Max absorbed power (E) W 24 Sound power min-max 42/54 dB(A) Sound pressure (f) dB(A) 35 Power supply V/ph/Hz 230/1/50 Dimensions WxHxD 1295x599x129mm SL Air inverter accessories TR (Touch Remote) control included Wall-mounted LCD programmable thermostat B0736 control for MODBUS, RS485 connection - optional Possibility of controlling up to 30 units. Desired temperature selection, operating mode, fan speed, manual/chronothermostat mode. Ambient probe inserted in the command. Backlit LCD display. Bi2 SL AIR Bi2® Air is the system terminal that heats, cools, dehumidifies and filters. Thanks to its integral design, just 12.9 cm thick, installing and maintaining the machine has never been easier! With the innovative integrated multiset control you also have maximum comfort always at hand. INTEGRAL DESIGN® Thanks to the essential design and the front body combined with the lateral sides, the installation and maintenance of Bi2 Air are simplified MULTISET CONTROL Integrated multiset electronics for touch use on the machine or for universal dialogue with remote controls and home automation Characteristics: Heat, Cool, Dehumidify and Filter Integral aesthetics with suction from the lower side Front in metal, sides in ABS Compact: Thickness min 12.9 cm max 15 cm Range made up of 5 power models DC brushless motor Monobloc body for working in comfort Motorized steel air delivery flap Anti-intrusion grilles on the air intake and outlet Removable filters located on the air intake Remote control supplied TR CONTROL (Touch Remote): Touch control on the machine and remote control supplied. Through a selection of keys on the machine, it is possible to remote control* with wall remote control (chronothermostat code B0736, optional) or with home automation, through the Modbus RS485 signal protocol Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€555,00
-
Aermec Aermec Fan Coil Fan Coil Mod. FCZ-Act 600 With Electronic Control Included
COMPLETE WITH SWITCH AERMEC FAN COIL FAN COIL model FCZ-ACT 600 with electronic control Technical features version with electronic thermostat vertical installation only - for two-pipe systems Hot-cold kW (High): 2.40-1.00 Dimensions with feet (HxWxD): 576 x 1320 x 220 (mm) Weight without feet: 13 kg White color Coat RAL 9003 Headboard and Plinths RAL 7047 General characteristics Aermec FCZ fan coils Taking advantage of the exceptional experience gained with fan coil units, Aermec presents the new FCZ series where elegant design marries state-of-the-art performance in terms of sound level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any requirement. FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations according to the installation position, with the possibility also of being ducted. They are characterized by multi-speed motors coupled to ABS fans with an impeller equipped with airfoil fins and an inspectable auger. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4-row coil can have an additional 1 or 2-row secondary coil for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with smartphone. FCZ are compatible with the VMF management system. (Features vary by model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: RAL9003 shell, RAL 7047 head Three speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille closes, the fan coil switches off automatically Low pressure drop in the heat exchange coils Ease of installation and maintenance G2 class air filter for all versions, easy to remove and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Extractable and inspectable augers for easy and effective cleaning Reversibility of the water connections during installation only for units with main, standard or oversized coil (Non-reversible for units with secondary coil). In the units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil to set the operating modes and the weekly time programming. Using the graphical interface of the App, it is also possible to access numerous other information such as the alarm list, the nearest satellite, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€495,00
-
Aermec Aermec Fan Coil Fan Coil Mod. FCZ-A 700 With Switch Included Heating Only
COMPLETE WITH SWITCH FAN COIL FAN COIL AERMEC model FCZ-A 700 with control included heating only Technical features version with switch Heating version Dimensions with feet (HxWxD): 576 x 1320 x 220 (mm) Weight without feet: kg 29 White color Coat RAL 9003 Headboard and Plinths RAL 7047 General characteristics Aermec FCZ fan coils Taking advantage of the exceptional experience gained with fan coil units, Aermec presents the new FCZ series where elegant design marries state-of-the-art performance in terms of sound level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any requirement. FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations according to the installation position, with the possibility also of being ducted. They are characterized by multi-speed motors coupled to ABS fans with an impeller equipped with airfoil fins and an inspectable auger. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4-row coil can have an additional 1 or 2-row secondary coil for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with smartphone. FCZ are compatible with the VMF management system. (Features vary by model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: RAL9003 shell, RAL 7047 head Three speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille closes, the fan coil switches off automatically Low pressure drop in the heat exchange coils Ease of installation and maintenance G2 class air filter for all versions, easy to remove and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Extractable and inspectable augers for easy and effective cleaning Reversibility of the water connections during installation only for units with main, standard or oversized coil (Non-reversible for units with secondary coil). In the units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil to set the operating modes and the weekly time programming. Using the graphical interface of the App, it is also possible to access numerous other information such as the alarm list, the nearest satellite, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€386,00
-
Aermec Aermec Fan Coil Mod. FCZ-P 400 Recessed Fan Coil Vertical / Horizontal Installation - Command Excluded
AERMEC Fan Coil fan coil mod. FCZ-P 400 built-in vertical / horizontal installation - command excluded Heating power kW 5.74 Cold power kW 2.93 Dimensions HxWxD mm 216x973x453 Recessed installation Power supply V/ph/Hz 230V~50Hz FCZ-P Taking advantage of the exceptional experience gained with fan coils, Aermec presents the new FCZ P series built-in fan coils. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any requirement. Maximum silent operation Total comfort: reduced fluctuations in temperature and relative humidity Also suitable for ducted installations
€316,00
-
Innova Fan Coil Fan Coil Innova Airleaf Dc Inverter Sl1000c
NB: PRODUCT AVAILABLE ON ORDER Fan Coil Fan Coil INNOVA AirLeaf DC Inverter SL800C Model: SL1000C DC Inverter Energy efficiency: Total cooling capacity Total cooling capacity kW 3.73 Water flow rate L/h 642 Water flow rate (45/40 °C) Water flow rate (45/40 °C) L/h 752 Heating capacity with water 70/60 °C Heating capacity (water 70/60 °C) kW 8.30 Hydraulic characteristics Coil water content Water coil content L 1.8 Maximum operating pressure bar 10 Hydraulic connections Inch Eurokonus 3/4 Performance: Sound power at maximum airflow dB(A) 56 Sound pressure at maximum airflow dB(A) 47 Sound pressure at medium airflow dB(A) 38 Electrical data Supply voltage Power voltage V/ph/Hz 230/1/53 Maximum electrical power consumption Maximum power consumption W 30 Maximum absorbed current Maximum current input A 0.28 Dimensions: Dimensions (WxHxD) mm 1535x579x129 (without feet) NB: For the version with connection on the right, the article Motor connection cable must be added for moving the hydraulic connections from left to right (it can only be fitted in the factory) it can only be fitted in the factory THE CONTROL PANEL IS NOT INCLUDED AND HAS TO BE PURCHASED SEPARATELY AirLeaf INNOVA FAN COILS: HOT IN WINTER, COOL IN SUMMER, IN THE MAXIMUM SILENCE, WITH AN EXCLUSIVE DESIGN! AirLeaf Inverter DC is the fan coil that contains the best solution for heating , cooling and dehumidification in a single device. It allows to reach very high energy efficiencies due to the possibility of being coupled with low temperature heat generators such as: heat pumps , condensing boilers and integrated systems with solar collectors. Thanks to a sophisticated temperature regulator, AirLeaf guarantees excellent thermal comfort in every season. It heats and cools extremely quickly and once the desired temperature is reached, it maintains it with great precision in complete silence. In heating, AirLeaf develops an effective natural convection effect (similar to that of a radiator) which considerably reduces the need to activate the ventilation. Its harmonious design and the extraordinarily reduced depth of only 13 centimeters make it integrable in any type of environment for any furnishing need. The depth of 129 mm is obtained thanks to an innovative design. The fan is tangential with asymmetrical blades and the exchanger has a large frontal surface, thus obtaining high air flows with low pressure drops and very quiet operation. Efficiency is very high with energy consumption of a few Watts. The fan speed is no longer "in steps" but continuously modulated with proportional and integrative logic: this reduces both noise and annoying air movements. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€551,00
You have seen 192 out of 215 products