Get customized comfort with wall mounted Fan Coils. Elegant design, efficient performance and precise temperature control. Choose from our selection of wall mounted Fan Coils for effective and silent heating and cooling.
Fan coil convector Fan Coil INNOVA AirLeaf DC Inverter SL600C
Model:
SL600C DC Inverter
Energy efficiency:
Total cooling capacity Total cooling capacity kW 2.89
Water flow rate L/h 304
Water flow rate (45/40 °C) Water flow rate (45/40 °C) L/h 535
Heating capacity with water 70/60 °C Heating capacity (water 70/60 °C) kW 5.47
Hydraulic characteristics
Coil water content Water coil content L 1.13
Maximum operating pressure bar 10
Hydraulic connections Inch Eurokonus 3/4
Performance:
Sound power at maximum airflow dB(A) 51
Sound pressure at maximum airflow dB(A) 42
Sound pressure at medium airflow dB(A) 34
Electrical data
Supply voltage Power voltage V/ph/Hz 230/1/53
Maximum absorbed electrical power Maximum power consumption W 20
Maximum absorbed current Maximum current input A 0.18
Dimensions:
Dimensions (WxHxD) mm 1135x579x129 (without feet)
NB: For the version with connection on the right, the article Motor connection cable must be added for moving the hydraulic connections from left to right (it can only be fitted in the factory) it can only be fitted in the factory
THE CONTROL PANEL IS NOT INCLUDED AND HAS TO BE PURCHASED SEPARATELY
AirLeaf
INNOVA FAN COILS: HOT IN WINTER, COOL IN SUMMER, IN THE MAXIMUM SILENCE, WITH AN EXCLUSIVE DESIGN!
AirLeaf Inverter DC is the fan coil that contains the best solution for heating , cooling and dehumidification in a single device. It allows to reach very high energy efficiencies due to the possibility of being coupled with low temperature heat generators such as: heat pumps , condensing boilers and integrated systems with solar collectors. Thanks to a sophisticated temperature regulator, AirLeaf guarantees excellent thermal comfort in every season. It heats and cools extremely quickly and once the desired temperature is reached, it maintains it with great precision in complete silence. In heating, AirLeaf develops an effective natural convection effect (similar to that of a radiator) which considerably reduces the need to activate the ventilation.
Its harmonious design and the extraordinarily reduced depth of only 13 centimeters make it integrable in any type of environment for any furnishing requirement. The depth of 129 mm is obtained thanks to an innovative design. The fan is tangential with asymmetrical blades and the exchanger has a large frontal surface, thus obtaining high air flows with low pressure drops and very quiet operation. Efficiency is very high with energy consumption of a few Watts. The fan speed is no longer "in steps" but continuously modulated with proportional and integrative logic: this reduces both noise and annoying air movements.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
ATTENTION ! Compulsory accessory Condensate collection tray
Technical features
Model : Flat S 33
Cooling down
Total Output : 1.41 ~ 2.32 kW
Sensitive Output : 1.02 ~ 1.69 kW
Class : D
Water Flow : 243 ~ 399 l/h
Pressure Loss : 3 ~ 7 kPa
Heating
Total Output : 1.81 ~ 2.88 kW
Sensitive Output : 1.52 ~ 2.40 kW
Class : D
Water Flow : 264 ~ 417 l/h
Pressure Loss : 3 ~ 7 kPa
Performance
Power supply (V,Hz, Ø) : 230/50/1
Nominal Air Flow : 200 ~ 340 m 3 /h
Absorbed Power : 23 ~ 37 kW
Sound Power Level : 32 ~ 46 dB(A)
Dimensions and weight
Dimensions (HxW): 874x1160 mm
Weight : 23Kg
Galletti Flat S fan coil
FLAT S by Galletti represents the new generation of fan coils and was designed with the aim of offering performance and design at the top of its category.
FLAT S also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use.
Design covering cabinet in RAL9010 color only 17 cm deep, front panel in sheet steel, sides, upper grille and side doors made in UV stabilized ABS. The upper grille consists of a flap and adjustable fins. The flap is equipped with a microswitch which interrupts the operation of the unit when it is placed in the closed position. High efficiency heat exchange coil, in copper tube and aluminum fins. Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules. Electric motor with 3 or 6 speeds, mounted on anti-vibration supports. Regenerable air filter that can be easily removed for maintenance operations. Control panels, available as an accessory
Air filter
Regenerable filter made of honeycomb polypropylene, easily removable for maintenance operations
Electric motor
Mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings, it is directly coupled to the fans. It is available with both 3 and 6 (On request) rotation speeds to meet all specific requests in terms of performance, silence, electricity consumption
Fans
Double inlet centrifuges, statically and dynamically balanced, are made of antistatic ABS with airfoil blades and staggered modules. The fans are housed in a high efficiency ABS scroll
Mobile Cover
Design cover cabinet in RAL9010 color, only 17 cm deep, front panel in sheet steel. Sides, upper grille and side doors made of UV stabilized ABS to keep the color unchanged over time. The upper grille consists of a flap and adjustable fins. The flap is equipped with a microswitch which interrupts the operation of the unit when it is placed in the closed position
Structure
Made of thick galvanized steel sheet, thermally and acoustically insulated with class 1 self-extinguishing panels
Heat Exchange Battery
High efficiency in copper tube and aluminum fins, it is equipped with brass manifolds and vent valve. The hydraulic connections are reversible during installation. On request, it is possible to mount an additional coil for 4-pipe systems
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
GALLETTI ESTRO F9A FAN COIL FAN COIL 4,84 kW
Model : ESTRO F9A
Fan coils for exposed wall installation with cover cabinet with inclined air outlet.
Dimensions: 1194 x 556 x 228mm
Product pluses:
3/6 speed motor
Built-in ionizer
Can be integrated with ERGO
Eurovent certification
Steel / ABS cabinet
Can be installed in niche
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Cockerels Estro
ESTRO is the widest range of Fan Coils on the market. In carrying out the project for the ESTRO fan coils, high quality materials were chosen which, together with the great care and attention given to the assembly of the main construction components, qualify ESTRO in the field of performance reliability and acoustic comfort. The cover cabinet is made up of a sheet steel panel, side panels and delivery grille in ABS. Inclined air outlet for wall niche installation. High efficiency heat exchange coil, in copper tube and aluminum fins.
Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules.
Electric motor with 3 or 6 speeds, mounted on anti-vibration supports.
Regenerable air filter that can be easily removed for maintenance operations.
Control panels, available as an accessory.
Estrus FA
Visible wall installation with cover unit. The inclined air outlet on the front makes the ESTRO FA version particularly suitable for insertion in recesses up to 150 mm deep. ESTRO FA is available in 19 models.
Centrifugal fan
Supervision ergo
Vertical installation
4-pipe system
2-pipe system
Technical characteristics of the main components:
Mobile Of coverage composed of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS . The side doors allow access to the technical compartments.
Inclined air outlet for wall niche installation.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil , in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Motor electric with three or six speeds mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Fans centrifuges double suction, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Filter air regenerable in honeycomb polypropylene, mounted on a galvanized sheet frame with a safety net, which can be easily removed for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Panels control , available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions vary.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
GALLETTI ESTRO F6A FAN COIL FAN COIL 2,83 kW
Model : ESTRO F6A
Fan coils for exposed wall installation with cover cabinet with inclined air outlet.
Dimensions: 984 x 556 x 228mm
Product pluses:
3/6 speed motor
Built-in ionizer
Can be integrated with ERGO
Eurovent certification
Steel / ABS cabinet
Can be installed in niche
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Cockerels Estro
ESTRO is the widest range of Fan Coils on the market. In carrying out the project for the ESTRO fan coils, high quality materials were chosen which, together with the great care and attention given to the assembly of the main construction components, qualify ESTRO in the field of performance reliability and acoustic comfort. The cover cabinet is made up of a sheet steel panel, side panels and delivery grille in ABS. Inclined air outlet for wall niche installation. High efficiency heat exchange coil, in copper tube and aluminum fins.
Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules.
Electric motor with 3 or 6 speeds, mounted on anti-vibration supports.
Regenerable air filter that can be easily removed for maintenance operations.
Control panels, available as an accessory.
Estrus FA
Visible wall installation with cover cabinet. The inclined air outlet on the front makes the ESTRO FA version particularly suitable for insertion in recesses up to 150 mm deep. ESTRO FA is available in 19 models.
Centrifugal fan
Supervision ergo
Vertical installation
4-pipe system
2-pipe system
Technical characteristics of the main components:
Mobile Of coverage composed of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS . The side doors allow access to the technical compartments.
Inclined air outlet for wall niche installation.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil , in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Motor electric with three or six speeds mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Fans centrifuges double suction, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Filter air regenerable in honeycomb polypropylene, mounted on a galvanized sheet frame with a safety net, which can be easily removed for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Panels control , available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions change.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
GALLETTI ESTRO F12A FAN COIL FAN COIL 11 kW
Model : ESTRO F12A
Fan coils for exposed wall installation with cover cabinet with inclined air outlet.
Dimensions: 1614 x 556 x 253mm
Product pluses:
3/6 speed motor
Built-in ionizer
Can be integrated with ERGO
Eurovent certification
Steel / ABS cabinet
Can be installed in niche
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Cockerels Estro
ESTRO is the widest range of Fan Coils on the market. In carrying out the project for the ESTRO fan coils, high quality materials were chosen which, together with the great care and attention given to the assembly of the main construction components, qualify ESTRO in the field of performance reliability and acoustic comfort. The cover cabinet is made up of a sheet steel panel, side panels and delivery grille in ABS. Inclined air outlet for wall niche installation. High efficiency heat exchange coil, in copper tube and aluminum fins.
Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules.
Electric motor with 3 or 6 speeds, mounted on anti-vibration supports.
Regenerable air filter that can be easily removed for maintenance operations.
Control panels, available as an accessory.
Estrus FA
Visible wall installation with cover unit. The inclined air outlet on the front makes the ESTRO FA version particularly suitable for insertion in recesses up to 150 mm deep. ESTRO FA is available in 19 models.
Centrifugal fan
Supervision ergo
Vertical installation
4-pipe system
2-pipe system
Technical characteristics of the main components:
Mobile Of coverage composed of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS . The side doors allow access to the technical compartments.
Inclined air outlet for wall niche installation.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil , in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Motor electric with three or six speeds mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Fans centrifuges double suction, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Filter air regenerable in honeycomb polypropylene, mounted on a galvanized sheet frame with a safety net, which can be easily removed for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Panels control , available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions change.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
ATTENTION ! Remote control to be purchased separately.
Technical features
Model : ART-U10
Speed : 4.50 ~ 6.40V
Nominal Air Flow : 110 ~ 179 m 3 /h
Power Consumption: 4 ~ 6W
Global Sound Power : 37 ~ 49 dB(A)
Cooling performance
Power output in total cooling : 0.39 ~ 0.80 kW
Power output in Sensible Cooling : 0.29 ~ 0.63 kW
Energy Efficiency Class in Cooling: C
Water Flow : 67 ~ 134 l/h
pressure drop : 3 ~ 2 kPa
Warm-up performance
Power Output in Heating : 0.56 ~ 0.87 kW
Heating Energy Efficiency Class: C
Water Flow : 98 ~ 146 l/h
pressure drop : 3 ~ 2kPa
Dimensions and weight
Dimensions (HxW): 616x711x101 mm
Weight : 12Kg
Accessories
TED 10 Simplified Electronic Control (Optional)
TED 10 on-board installation kit (Optional)
Air or Water Temperature Probe for TED Commands (Optional)
Galletti fan coil ART-U Innovation driven by Design
The new ART-U is born from the great experience of Galletti in the development and design of fan coils and as confirmation of its continuous search for innovation, the result of a perfect combination between performance and design. The objective achieved by this project is absolutely ambitious: a new and unique product, not yet present on the market, which on the one hand is capable of responding to increasingly stringent requests in terms of energy efficiency, on the other meeting for the first turn the recent furniture and interior design trends.
With the new ART-U, Galletti completely hits this target, presenting a new concept of hydronic unit on the market, a product that is characterized by its enviable technical performance and at the same time represents a real stylistic shift in a sector accustomed for too long to products that are very similar to each other
ART-U, with its depth that in some points is just 10 cm, and thanks to its unique lines, was conceived to be an absolutely transversal product, which adapts perfectly both to rigorous and essential environments, and to more warm and sophisticated. Thanks also to the possibility of customizing the front panel, ART-U satisfies the request for ever greater customization of the spaces to be furnished
The achievement of very high aesthetic standards has not weakened the usual constructive virtuosity of Galletti products: the search for innovation has in fact also concentrated on the components and on the use of new materials. With ART-U the state of the art has been redefined also in terms of technical performance, thanks to the use of computational fluid dynamics simulations for the optimization of the heat exchange inside the terminal combined with the use of permanent magnet electric motors
Designer furniture
The elegant front panel is made up of two aluminum sheets with a polyethylene core and optional polyester-based surface painting. It is a light but very resistant material, created for facade cladding in the building sector. The side panels are in UV stabilized ABS to keep the color unchanged over time. The polyethylene core acts as a flexible filling and thermal insulator while the aluminum gives structurality and aesthetics
Conveyors
In high density polystyrene. They are designed to optimize the aeraulic flow inside the hydronic terminal allowing an optimal distribution of the air flow in the coil and low noise at any operating regime
Upper grille
Consisting of adjustable fins in anodized aluminum, available in the version for on-board or wall-mounted control. The ABS combs, supporting the grids, prevent them from bending, always guaranteeing the user's safety
Electric motor
Permanent magnet BLDC motor with inverter integrated in the fan unit. The IP54 degree of protection is guaranteed, therefore the access of dust to the inside is prevented and resistance to water splashes is guaranteed
Tangential fan
Tangential fan statically and dynamically balanced to reduce operating noise. The plastic material used for the blades guarantees, compared to metal fans, a reduction of vibrations and absence of bending along the axis of rotation. The blades are interspersed with intermediate reinforcement disks in order to increase their strength
Heat exchange coils
High efficiency turbulent in copper tube and aluminum fins, it is equipped with brass manifolds and vent valve. The hydrophilic treatment is applied as standard on the fins, to increase their effectiveness in cooling and at the same time greater resistance to aggressive atmospheres. The hydraulic connections are reversible during installation. On request, it is possible to mount an additional coil for 4-pipe systems
Air filter
Regenerable filter made of honeycomb polypropylene, easily removable for maintenance operations
Computational fluid dynamics simulations
Model
Computational fluid dynamics (CFD) is a method that uses numerical analysis to solve fluid dynamics problems using computers. For the ART-U project, a computational domain discretized by means of a polyhedral computational grid (mesh) consisting of 12 million cells was considered. The mesh has a refinement extended to the entire rotor area to best reproduce the vortices that are created in this area
Air motion field
During the initial development phase of the ART-U project, the calculation showed recirculation of the fluid downstream of the rotor in different areas, with consequent pressure drops
Flow lines
The flow lines show how the trajectory of the fluid streams inside the unit does not have a uniform distribution. For this reason, the research also focused on the improvement of air distribution along the longitudinal axis of the fan, minimizing wall effects. The results of these simulations have allowed an optimization of the geometry of the internal conveyor and of the orientation of the finned pack coil
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
FAN COIL FAN COIL AERMEC mod. OMNIA UL 26 with switch included
Model: OMNIA UL 26
Cooling capacity: 2.03 - 1.28 kW
Thermal power: 4.62 - 2.89 kW
Water content: 0.8 litres
Dimensions (HxWxD): 513 x 980 x 173 (mm)
Plinth Height: 93 (mm)
Weight: 16.5 kg
White color
- Coat RAL 9002
- Headboard and Plinths RAL 7044
General characteristics
AERMEC OMNIA UL
Fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator.
Cooling and heating
Wall installation
Floor installation
Centrifugal fan
Centralized control
Compatible with VMF (Variable Multi Flow) system
For two-pipe systems
The units of the OMNIA UL (Universal Line) series are fan coil units suitable for air conditioning. Available in various configurations depending on the installation position, with the possibility of being ducted, they are characterized by multi-speed motors. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The UL unit, in the PC version, is equipped as standard with the PLASMACLUSTER ionizing filter, while the RADIANT version is equipped with a radiant plate with on/off motor or inverter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system.
Versions:
UL-S: version without controls, with cabinet. Compatible with the VMF system UL: version with switch and cabinet UL-C: version with electronic thermostat and cabinet UL-PC: version with electronic thermostat, Plasmacluster filter (can be installed on site only) and mobile
Characteristics:
Cleaning the fan: With Omnia fan coils you can easily clean the fan blades. Now, in fact, it is possible to open the cochlea of the fan (the casing that encloses the blades) and proceed with their periodic cleaning. Cleaning the condensate tray: Thanks to a new fixing system for the condensate collection tray, now, with Omnia fan coils, it can be cleaned easily. This important solution avoids, in the long term, the formation of bacteria, germs and molds in the basin itself, due to the condensation of the humidity present in the air Electrostatically precharged filter: Omnia fan coils are equipped, as standard, with electrostatically precharged air filters. These filters, thanks to their particular construction, absorb and retain suspended dust: the ideal system to ensure healthy air for the whole family. Silent operation: Thanks to the adoption of special centrifugal fans, the Omnia fan coils have extremely silent ventilation which takes these new fan coils to the top of acoustic comfort thanks to the absence of noise peaks
UL listed fan coil units for wall or floor installation
EUROVENT certification
3-speed centrifugal fan group
Maximum silence
High design aesthetics with rounded lines
Adjustable air distribution grille
Automatic switch-off of the fan coil by closing the air distribution grille
Small dimensions
Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat)
Reversibility of the hydraulic connections during installation
Low pressure drop in the heat exchange coils
Electric motors with permanently inserted capacitors
Ease of installation and maintenance
Easy to remove and clean air filter
Electrostatically preloaded filter
Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
FAN COIL FAN COIL AERMEC model OMNIA HL 36
vertical and horizontal installation
Hot-cold kW (High): 4.87 - 2.30
Dimensions with feet (HxWxD): 623 x 1200 x 198 (mm)
Weight: 20.6 kg
White color
General characteristics
OMNIA HL
The units of the OMNIA HL (High Line) series are fan coil units suitable for air conditioning. Available in various configurations, they can be installed on the floor or on the ceiling and are characterized by multi-speed motors, three of which are selectable. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The HL unit, in the PC and PCM version, is standard equipped with the PLASMACLUSTER ionizing filter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system. HL (High Line) fan coils for both horizontal and vertical installation 4 sizes and 10 versions:
HL: white cabinet with switch
HL M: gray cabinet with switch
HL N: white cabinet with VMF electronic thermostat
HL NM: gray cabinet with VMF electronic thermostat
HL L: white cabinet with self-closing flap and electronic thermostat
HL LM: gray cabinet with self-closing flap and electronic thermostat
HL PC: white cabinet with electronic thermostat and Plasmacluster filter (can be installed on site only)
HL PCM: gray cabinet with electronic thermostat and Plasmacluster filter (can be installed on site only)
HL S: white cabinet without controls. Compatible with the VMF System
HL SM: gray cabinet without controls. Compatible with the VMF System
On/off fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator.
3-speed centrifugal fan unit
Maximum silence
High design aesthetics with rounded lines
New adjustable air distribution grille
Automatic switch-off of the fan coil by closing the air distribution grille
Small dimensions
Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat)
Reversibility of the hydraulic connections during installation
Low pressure drop in the heat exchange coils
Electric motors with permanently inserted capacitors
Ease of installation and maintenance
Full compliance with accident prevention regulations
Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
IDROFAN 42NMS45FA Fan Coil Carrier Fan Coil with ''A'' type command on board
Vertical console with cabinet
Cooling capacity: 5.45 kW
Heating capacity: 8.08 kW
Electric resistance (high capacity) W 2000
Electric resistance (low capacity) W 1000
Dimensions WxD: 1430 x 220
Height (with 100mm feet): 657
Weight: 35Kg
CARRIER
Thanks to its simple and elegant design (winner of the ADI Design award) it is the ideal solution for many applications, such as hotels, offices and commercial buildings. Maximum optimization of comfort and reduction of energy costs. Available in the built-in version for installation in false ceilings or with cabinet for visible installation (only 220 mm in height for the built-in unit). Both in the version with high-efficiency variable-speed LEC (brushless) motors and with multispeed AC motor, it allows you to promptly respond to the need for comfort, efficiency and versatility. A variety of thermostats and controls are available either on board or remote for wall installation
Energy efficiency is the class of its success
The range of IDROFAN 42N fan coil units fits perfectly with the new reference requirements for buildings with low energy consumption, offering greater energy savings and immediate comfort for users. Its success is essentially due to low energy consumption and construction features based on modularity, ease of installation and reliability. Reducing CO2 emissions into the atmosphere by 20% by 2020 is a goal that IDROFAN already achieved a few years ago. IDROFAN is designed to maximize efficiency and savings, through the use of more flexible technologies aimed at protecting the natural environment. The new range of IDROFAN 42N fan coils is the ideal solution for multiple applications, such as hotels, offices and commercial buildings, allowing you to optimize comfort and reduce energy costs The high performance fan of the IDROFAN range incorporates the latest technology of LEC motors, variable speed, or five speeds, improving user comfort thanks to a noise level reduction of up to -10 dB(A) compared to previous models. The LEC variable speed motor coupled to the latest generation NTC electronic control, the almost imperceptible air flow and the fan speeds that can be customized on site, ensure the best comfort and ultra-quiet operation.
Reduced consumption
facilitate compliance with new laws regarding energy consumption
Maximum flexibility
minimum size and wide range of powers for any installation and climate
Perfect integration
and low noise impact with any building management system
Improved comfort
thanks to advanced technologies that guarantee silence and well-being
Accessories
TYPE "A" Electronic Thermostat Control for IDROFAN 2-pipe fan coils, 42N series, wall-mounted, CARRIER ( Code 33TA-AC01)
Kit for installation of type "A" control on board the 42NM/Z unit (Cod. 42N9100)
The TYPE "A" CARRIER control is suitable for controlling IDROFAN convectors in both heating and cooling modes. With:
Power button for switching on/off the fan coil;
Mode button for manual adjustment of the heating/cooling functions indicated by special red/blue LEDs;
Ventilation Adjustment Button with the 3 Speeds (I-II-III) that can be set manually, the Economy mode for energy saving and the Auto mode, all signaled from time to time by special LEDs;
Temperature Selector Knob with a range from + 10°C. at + 30°C.
Antifreeze function which is activated with temperatures below 7°C.,
Night and Dimming mode which acts on the lights of the operating LEDs,
AutoTest , possibility of configuring the adjustments during installation using special microswitches, possibility of using the internal temperature sensor in case of wall installation or a remote sensor - Minimum Temperature Probe in case of installation on the machine (to be purchased separately) .
The CARRIER Type "A" Control can be installed on the fan-coil using the special Kit for installing the Type "A" Control on the 42NM/Z unit ( allows connection of the Control to the electrical components of the fan coil and consists supplied by: cable kit, air probe, bracket, adhesive bands, screws ) Code 42N9100. Controls the fan coil in both the heating and cooling functions where the system is set up for this type of function.
Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
Riello Design Wall 11P Fan Coil fan coil for combination with TOP Optional wall control panel accessory 20186364 1.65 kW
Total yield in cooling (a) kW 1.65
Water flow l/h 279
Output in heating with 45°C water inlet (b) kW 1.80
Water pressure drop (70°C ∆T 10) kPa 4.7
Battery water content 0.74 litres
Maximum working pressure 10 bar
EUROKONUS 3/4" inch hydraulic connections
Maximum air flow (d) m3 /h 331
Air flow at medium speed (AUTO mode) m3/h 229
Supply voltage V/ph/Hz 230/1/50
Maximum electrical power absorbed W 229
Sound pressure at maximum air flow (d) dB(A) 42.4
Dimensions mm WxHxD 1102x335x128
Design WALL
DESIGN WALL is the new range of Riello wall-mounted fan coils for residential and small commercial applications. Thanks to the DC-Brushless motor, DESIGN WALL fan coils are able to work with a high modulation of the air flow, from 0 up to 100%, to maintain a comfortable temperature inside the room and guarantee maximum silence during operation. DESIGN WALL fan coils are characterized by an extremely slim aesthetic, with a depth of only 128 mm, for perfect integration within the premises. The air distribution takes place via motorized flaps, obtaining a uniform diffusion throughout the room. Available in two versions: with remote control included and TOUCH display on the machine or for combination with the TOP wall-mounted control panel accessory (Design Wall 11÷23P). All the functions of the fan coil are guaranteed. The range is available in 3 cooling power sizes from 1070 W up to 2310 W and in heating from 1270 W up to 2600 W, in the two versions with supplied remote control or in combination with the TOP wall-mounted control panel.
Ultra slim aesthetics
Depth of 128 mm also with 2-3 way valve on board
Motorized flaps for comfortable air distribution
Controls with Touch Display
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
AERMEC Fan Coil fan coil mod. FCZ-P 600 built-in vertical / horizontal installation - command excluded
Heating power kW 8.10
Cold power kW 3.90
Dimensions HxWxD mm 216x1122x453
Recessed installation
Power supply V/ph/Hz 230V~50Hz
FCZ-P
Taking advantage of the exceptional experience gained with fan coils, Aermec presents the new FCZ P series built-in fan coils. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any need.
Maximum silent operation
Total comfort: reduced fluctuations in temperature and relative humidity
Also suitable for ducted installations
ATTENTION ! Remote control to be purchased separately.
Technical features
Model : ART-U20
Speed : 4.90 ~ 10.0V
Nominal Air Flow : 190 ~ 391 m 3 /h
Power Consumption: 7 ~ 17W
Global Sound Power : 39 ~ 54 dB(A)
Cooling performance
Power output in total cooling : 0.93 ~ 1.67 kW
Power output in Sensible Cooling : 0.69 ~ 1.28 kW
Energy Efficiency Class in Cooling : B
Water Flow : 161 ~ 282 l/h
pressure drop : 4 ~ 11 kPa
Warm-up performance
Power Output in Heating : 1.04 ~ 1.81 kW
Heating Energy Efficiency Class: C
Water Flow : 169 ~ 303 l/h
pressure drop : 4 ~ 12kPa
Dimensions and weight
Dimensions (HxW): 772x867 mm
Weight : 14Kg
Accessories
TED 10 Simplified Electronic Control (Optional)
TED 10 on-board installation kit (Optional)
Air or Water Temperature Probe for TED Commands (Optional)
Galletti fan coil ART-U Innovation driven by Design
The new ART-U is born from the great experience of Galletti in the development and design of fan coils and as confirmation of its continuous search for innovation, the result of a perfect combination between performance and design. The objective achieved by this project is absolutely ambitious: a new and unique product, not yet present on the market, which on the one hand is capable of responding to increasingly stringent requests in terms of energy efficiency, on the other meeting for the first turn the recent furniture and interior design trends.
With the new ART-U, Galletti completely hits this target, presenting a new concept of hydronic unit on the market, a product that is characterized by its enviable technical performance and at the same time represents a real stylistic shift in a sector accustomed for too long to products that are very similar to each other
ART-U, with its depth that in some points is just 10 cm, and thanks to its unique lines, was conceived to be an absolutely transversal product, which adapts perfectly both to rigorous and essential environments, and to more warm and sophisticated. Thanks also to the possibility of customizing the front panel, ART-U satisfies the request for ever greater customization of the spaces to be furnished
The achievement of very high aesthetic standards has not weakened the usual constructive virtuosity of Galletti products: the search for innovation has in fact also concentrated on the components and on the use of new materials. With ART-U the state of the art has been redefined also in terms of technical performance, thanks to the use of computational fluid dynamics simulations for the optimization of the heat exchange inside the terminal combined with the use of permanent magnet electric motors
Designer furniture
The elegant front panel is made up of two aluminum sheets with a polyethylene core and optional polyester-based surface painting. It is a light but very resistant material, created for facade cladding in the building sector. The side panels are in UV stabilized ABS to keep the color unchanged over time. The polyethylene core acts as a flexible filling and thermal insulator while the aluminum gives structurality and aesthetics
Conveyors
In high density polystyrene. They are designed to optimize the aeraulic flow inside the hydronic terminal allowing an optimal distribution of the air flow in the coil and low noise at any operating regime
Upper grille
Consisting of adjustable fins in anodized aluminum, available in the version for on-board or wall-mounted control. The ABS combs, supporting the grids, prevent them from bending, always guaranteeing the user's safety
Electric motor
Permanent magnet BLDC motor with inverter integrated in the fan unit. The IP54 degree of protection is guaranteed, therefore the access of dust to the inside is prevented and resistance to water splashes is guaranteed
Tangential fan
Tangential fan statically and dynamically balanced to reduce operating noise. The plastic material used for the blades guarantees, compared to metal fans, a reduction of vibrations and absence of bending along the axis of rotation. The blades are interspersed with intermediate reinforcement disks in order to increase their strength
Heat exchange coils
High efficiency turbulent in copper tube and aluminum fins, it is equipped with brass manifolds and vent valve. The hydrophilic treatment is applied as standard on the fins, to increase their effectiveness in cooling and at the same time greater resistance to aggressive atmospheres. The hydraulic connections are reversible during installation. On request, it is possible to mount an additional coil for 4-pipe systems
Air filter
Regenerable filter made of honeycomb polypropylene, easily removable for maintenance operations
Computational fluid dynamics simulations
Model
Computational fluid dynamics (CFD) is a method that uses numerical analysis to solve fluid dynamics problems using computers. For the ART-U project, a computational domain discretized by means of a polyhedral computational grid (mesh) consisting of 12 million cells was considered. The mesh has a refinement extended to the entire rotor area to best reproduce the vortices that are created in this area
Air motion field
During the initial development phase of the ART-U project, the calculation showed recirculation of the fluid downstream of the rotor in different areas, with consequent pressure drops
Flow lines
The flow lines show how the trajectory of the fluid streams inside the unit does not have a uniform distribution. For this reason, research has also focused on improving the distribution of air along the longitudinal axis of the fan, minimizing wall effects. The results of these simulations have allowed an optimization of the geometry of the internal conveyor and of the orientation of the finned pack coil
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
