Technical features Seasonal efficiency class for heating: Class C Sanitary Seasonal Efficiency Class: Class B Declared load profile: M Nominal useful power: kW 23 Minimum useful power: 9.9 kW Combustion efficiency at nominal load 91.0% Combustion efficiency at reduced load 88.0% Minimum pressure of the heating circuit bar 0.5 Maximum pressure of the heating circuit bar 3 Minimum flow rate of the heating circuit. (∆t 20 °C) 7.12 l/min Specific sanitary water flow rate (∆t 30 °C) 10.5 l/min Total capacity of expansion tank 6 l IP X4D degree of protection Power supply: methane Characteristics Bithermal exchanger Ignition and electronic detection single electrode Proportional continuous gas modulation by microprocessor both in heating and DHW production phases with control temperature probe Antifreeze protection on the primary heating circuit on 2 levels: internal heating activation, block with signal in the event of gas shortage Pump anti-blocking timer which prevents seizure in the event of prolonged inactivity High efficiency modulating circulator equipped with built-in automatic deaerator All-metal shell enamelled with epoxy-polyester paint, insulated with acoustic/thermal insulation (8 mm thick) complete with heat-reflecting layer Facilitated maintenance with tilting panel and front access Included: Hydrometer, automatic differential by-pass, 6 liter expansion vessel, safety valve and thermostat, low water pressure switch, priority flow switch with filter

Read more less

Unical KON1 24C kW Methane or LPG Condensing Boiler Complete with Fume Exhaust Kit, various colors available - NEW ErP Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power: 23.6 kW Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of rated thermal power in low temperature regime (Tr 30 °C) P1 kW: 4.2 kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.07 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400 kWh DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion vessel capacity: 7 l Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 810x450x345 mm; 40kg Gas transformation kit inside documentation envelope KON1 KON1 is the latest among the "furnishing boilers" that Unical presents in synergy with the ArtÙ Design Studio. Soft lines and an elegant front, available in different colours, enclose a latest generation condensing boiler running on methane or LPG, with instantaneous hot water production up to 18 l/min. KON1 can also be installed with a completely hidden flue system. The range includes 3 powers: 24, 28 and 35 kW. The exclusive Unical system of both hydraulic connections and the totally disappearing smoke outlet, allows an elegant installation and integration of KON1 in both modern and classic environments, avoiding unsightly exposed pipes. HWS “Hot Water Speed” is the new electronics of KON1 which switches from heating to DHW function with burner and pump always active, considerably improving the comfort of the user who does not have to wait for hot water. Secondary exchanger In AISI 316L stainless steel - with 12 plates (mod. 24) - with 16 plates (mod. 28 and 35) Particularly efficient because it is suitable for condensing boilers by exploiting their low temperature. Its "ecological" project is distinguished by a new design of the plates which allows for the transfer of a greater quantity of heat by making the most of the characteristics of stainless steel. Outstanding modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) ηs 93% (EU regulation 813/2013 - dir. ERP 2009/125/CE) Energy class A Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function Low NOx class 6 (according to EN 15502-1) thanks to the modulating premix burner Hot water production up to 18.3 l/min Dt 25 with special heat exchanger Management of 2 temperature zones (high/low) by applying a second on/off thermostat "Pit stop" maintenance and convenient internal control panel for technical assistance interventions EASYr : remote control (standard) with chronothermostat functions, applicable wirelessly to the wall or free-standing with support High efficiency modulating circulator Prepared for future applications in systems and suitable to meet the requirements of the new installation standards No visible command on the boiler, but it is EASYr (standard) which, without wires, performs the dual function of chronothermostat and remote control inside the home. Two-way radio frequency communications; Operating parameters control; Weekly programming; Room antifreeze function; Can be combined with external probe; Applicable to the wall or free-standing with support Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL !DEA AC 23 PLUS METHANE OPEN CHAMBER - ErP Technical features Seasonal efficiency class for heating: Class C Sanitary Seasonal Efficiency Class: Class B Declared load profile: M Nominal useful power: kW 23 Minimum useful power: kW 10.3 Combustion efficiency at nominal load 91.0% Combustion efficiency at reduced load 88.6% Minimum pressure of the heating circuit bar 0.5 Maximum pressure of the heating circuit bar 3 Minimum flow rate of the heating circuit. (∆t 20 °C) 7.5 l/min Domestic hot water specific flow rate (∆t 30 °C) 11.0 l/min Total capacity of expansion tank 6 l IP X4D degree of protection Power supply: methane Characteristics Monothermal exchanger + sanitary plate exchanger and 3-way valves Ignition and electronic detection single electrode Proportional continuous gas modulation by microprocessor both in heating and DHW production phases with control temperature probe Antifreeze protection on the primary heating circuit on 2 levels: internal heating activation, block with signal in the event of gas shortage Pump anti-blocking timer which prevents seizure in the event of prolonged inactivity High efficiency modulating circulator equipped with built-in automatic deaerator All-metal shell enamelled with epoxy-polyester paint, insulated with acoustic/thermal insulation (8 mm thick) complete with heat-reflecting layer Facilitated maintenance with tilting panel and front access Included: Hydrometer, automatic differential by-pass, 6 liter expansion vessel, safety valve and thermostat, low water pressure switch, priority flow switch with filter Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

Unical KON X SLIM 24C condensing boiler complete with low NOx methane fume exhaust kit - New Minimum/nominal useful power in condensing kW 3.22 ÷ 23.7 Heating efficiency class A Declared load profile L Sanitary efficiency class A Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 88.7 production DHW cont. Dt 25 K (mixed) l/min 13.2 Total expansion vessel capacity l 9 (6+3) IP X5D degree of protection NOx class 5 Dimensions HxWxD mm 800x520x180 KON X SLIM KONx SLIM is a condensing boiler running on methane or LPG, with instantaneous production of domestic hot water. Covered with a satin finish AISI 304 stainless steel casing, it is ideal for outdoor installations, but equally elegant indoors. KONx SLIM is: Performant 24 and 35 kW (Range rated) Modulation ratio 1:8 Low NOx class 5 High energy efficiency A+ (System) the top of the category, >98% Hs (superior calorific value) Insulated and protected IP X5D, suitable for outdoor installation according to current standards (up to -15°C with antifreeze kit) Extremely compact with its depth of only 18 cm, Unical's record among wall-hung condensing boilers KONx SLIM, thanks to the RCh chronothermostat, OT multiprogram modulator, connected to the ambient and external probes supplied as standard, reaches seasonal efficiency equal to energy class A+ in heating. HWS "Hot Water Speed" is the new KONx SLIM electronics that switches from heating to DHW function with burner and pump always active, considerably improving user comfort who does not have to wait for hot water. Covered with a satin-finish AISI 304 stainless steel casing with a tapered-edge casing finish, KONx SLIM appears to have an essential and very elegant line, combining, with its hi-tech style, with the other appliances in the house Super small size depth of only 18cm Management of 2 temperature zones (high/low) by applying a second on/off thermostat Sliding temperature programmed to operate with the lowest possible delivery temperature to help save energy Intelligent system filling to guarantee functionality If the pressure is below 0.4 bar in the system circuit, the automatic water filling starts for 30 seconds once a day. If the request is repeated several times, a warning signal appears on the remote control Anti-overheating post-circulation automatically after the burner goes out, the boiler keeps the pump running for 5 minutes, preserving the components Chimney sweep function allows maintenance technicians to carry out the checks required by current standards in terms of efficiency and emissions Multigas operation (natural gas or LPG) with simplified switching Double expansion tank If necessary, it can mount an external auxiliary expansion tank (optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Model: Internal Unit Code: CS10 48HI Outdoor Unit Code: CS10 48HE Energy efficiency: SEER: 6.10 SCOP: 4.00 Cooling energy class: A++ Heating energy class: A+ Annual cooling/heating energy consumption: 805/3920 kWh/a Performance: Nominal cooling output power: 14.07 kW Nominal heating output power: 16.20 kW Nominal cooling power input: 5.13 kW Nominal heating power input: 4.28 kW INTERNAL SOUND PRESSURE (max - med - min) (*) dBA) 52-50-49 Sound Pressure Level Outdoor Unit: 66 dB(A) Electrical data: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Pipe connections: 5/8" / 3/8” Max height difference: 30 m Operating limits: - COOL. min~max °C - / -15 / +50 °C (out) - HEAT. min~max °C - / -15 / +24°C (out) Dimensions and weight: Indoor Unit LxPxH (mm): 840x840x287; 29 kgs Outdoor Unit LxPxH (mm): 946x810x410 ; 106.7 kgs General characteristics Unical cassettes Elegantly effective Unical Air CASSETTE air conditioners are available in 5 models, all with inverter heat pump. CS10 18H CS10 24H CS10 30H CS10 36H CS10 48H These machines, intended for recessed or false ceiling installation, are ideal for medium/large environments, such as bars, restaurants, large shops, meeting rooms, etc. The internal unit is enclosed in a completely insulated casing with a centralized fan which provides for the launch of the air through four vents located on the external sides and equipped with a special motorized deflector which distributes the air evenly and uniformly throughout the room. Installations in environments that often need to filter the air are favoured, for example: restaurants, meeting rooms and smoking areas. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Indoor unit code: CN10 60HI Outdoor unit code: CN10 60HE Refrigerant: R-32 Technology: Inverters Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual energy consumption in cooling/heating: 878/4375 Performance: Cooling capacity: 15.30 kW Heating capacity: 12.50 kW Air flow: 2600 m3/h Indoor unit sound pressure (db(A)): 54 Max Outdoor Unit Sound Pressure (db(A)): 66 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: inch 3/8"-5/8" Dimensions and weight: Indoor Unit (LxPxH): 1200x874x300 mm ; 47.6 kgs Outdoor Unit (LxWxH): 952x1333x415 mm; 111.3 kgs General characteristics Ductable The unseen climate All equipped with wired control, they are intended for recessed installations in false ceilings. The internal unit is made of steel and is adequately insulated to avoid heat loss and the formation of condensation and at the same time to ensure suitable acoustic insulation. The 4-speed adjustable fans of the indoor units provide a high head with an available static pressure of 100 Pa (10.0 mm H2 O). For the optimization and diversification of the air flows to be distributed, special "plenums" can be applied. Furthermore, the internal unit is supplied as standard with a pump to facilitate the disposal of the condensate, facilitating installation in false ceilings. Series features: Exchange batteries with large ventilation surface Rotary compressor for 18H and 24H models and Scroll type for 36H - 48H - 60H models Automatic defrosting system High silence High prevalence Self-diagnosis Autorestart Emergency power button Possible installation with PLENUM R-32 gas refrigerant Automatic condensation control Functions managed by the remote control Cooling down Dehumidification Heating Ventilation only Sleep Programmable On/Off timer Automatic operation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor units: Model: Indoor unit catalog code : (x2) KMCN 18HI Nominal cooling capacity: 5.28 kW (18000 btu/h) Nominal thermal power : 5.58 kW (19000 btu/h) Air flow : 880 m 3 /h Sound pressure : 42 dB(A) Dimensions Indoor unit (LxHxP): 880 x 674 x 210 mm Indoor Unit Weight: 36 kg Outdoor Unit: Model: Indoor Unit Catalog Code : KMX4 36HE (36190 Btu/h) Max number of indoor units that can be connected: 4 Energy efficiency: SEER (W/W): 6.15 SCOP (W/W): 4.0 Cooling Energy Efficiency Class: A++ Heating Energy Efficiency Class: A+ Annual cooling/heating consumption: 565/3226 kWh/a Performance Nominal power output in cooling mode: 10.60 kW Nominal absorbed power in cooling mode: 3.28 kW Nominal heating power: 11.10 kW Nominal heating absorbed power: 2.82 kW Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R32 Pipe connections Liquid/Gas: 1/4”/ 3x3/8” + 1x1/2" cm Sound pressure: 63dB(A) Dimensions: External Unit Dimensions (LxHxP): 946 x 810 x 410 mm Weight of Outdoor Unit: 69 Kg MULTI Unical combinations Example : System consisting of 1 outdoor unit and 4 indoor units Optimal comfort in any environment Unical's MULTI systems make it possible to reduce outdoor installation dimensions without having to give up the optimal comfort of the indoor rooms to be air-conditioned. In fact, a wide range of outdoor units can manage from 2 up to 5 indoor units of different types and power. If the sum of the powers of the indoor units exceeds that of the outdoor unit, the system will automatically distribute the total power among the various Indoor Units. There are therefore many possible combinations with the MULTI range. The outdoor units are available in five models with different powers: this allows for great system flexibility to satisfy all residential and commercial needs. It is possible to install the internal unit with the power that best suits the size and shape of each room to be air-conditioned. The comfort in the room is guaranteed by: DC Inverter technology: continuous progressive modulation allows the rotary compressor to adjust the absorbed power according to the number of indoor units required and according to the set temperature, obtaining electricity savings of 20% compared to traditional systems. Heat pump even with low outside temperatures , thanks to the variable speed fan of the outdoor unit. Constant temperature in the room , thanks to the modulation of the compressor power which avoids annoying temperature swings typical of on/off systems. Thermo- assisted modulating expansion valves : regulate the pressure of the refrigerant to always have the maximum yield from the refrigeration circuit according to the working conditions of the entire system. Ductable air conditioners All equipped with wired control, they are intended for recessed installations in false ceilings. The internal unit is made of steel and is adequately insulated to avoid heat loss and the formation of condensation and at the same time to ensure suitable acoustic insulation. The fans of the indoor units, adjustable to 4 speeds, provide a high head. For the optimization and diversification of the air fl ows to be distributed, special “plenums” can be applied. Furthermore, the Indoor Unit is supplied as standard with a pump to facilitate the disposal of the condensate, facilitating installation in the false ceiling Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Indoor unit code: CN10 18HI Outdoor unit code: CN10 18HE Refrigerant: R-32 Technology: Inverters Energy efficiency: Cooling efficiency SEER: 6.10 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual energy consumption in cooling/heating: 304/1512 KWh/A Performance: Cooling capacity: 5.30 kW Heating capacity: 4.30 kW Air flow: 880 m3/h Indoor unit sound pressure (db(A)): 41.5 Max Outdoor Unit Sound Pressure (db(A)): 55 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 1/4"/1/2" Dimensions and weight: Indoor Unit (LxWxH): 880x674x210 mm; 24.3 kg Outdoor Unit (LxWxH): 800x554x333 mm ; 35.5Kg Ductable The unseen climate All equipped with wired control, they are intended for recessed installations in false ceilings. The internal unit is made of steel and is adequately insulated to avoid heat loss and the formation of condensation and at the same time to ensure suitable acoustic insulation. The 4-speed adjustable fans of the indoor units provide a high head with an available static pressure of 100 Pa (10.0 mm H2 O). For the optimization and diversification of the air flows to be distributed, special "plenums" can be applied. Furthermore, the internal unit is supplied as standard with a pump to facilitate the disposal of the condensate, facilitating installation in false ceilings. General characteristics Series features: Exchange batteries with large ventilation surface Rotary compressor for 18H and 24H models and Scroll type for 36H - 48H - 60H models Automatic defrosting system High silence High prevalence Self-diagnosis Autorestart Emergency power button Possible installation with PLENUM R32 A gas refrigerant Automatic condensation control Functions managed by the remote control Cooling down Dehumidification Heating Ventilation only Sleep Programmable On/Off timer Automatic operation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Indoor unit code: CN10 36HI Outdoor unit code: CN10 36HE Refrigerant: R-32 Technology: Inverters Energy efficiency: Cooling efficiency SEER: 6.10 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual energy consumption in cooling/heating: 564/3675 KWh/A Performance: Cooling capacity: 10.5 kW Heating capacity: 8.40 kW Air flow: 1750 m3/h Indoor unit sound pressure (db(A)): 47 Max Outdoor Unit Sound Pressure (db(A)): 58.5 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: inch 3/8"-5/8" Dimensions and weight: Indoor Unit (LxWxH): 1360x774x249 mm ; 40.5 kgs Outdoor Unit (LxWxH): 946x810x410 mm; 81.5 kgs General characteristics Ductable The unseen climate All equipped with wired control, they are intended for recessed installations in false ceilings. The internal unit is made of steel and is adequately insulated to avoid heat loss and the formation of condensation and at the same time to ensure suitable acoustic insulation. The 4-speed adjustable fans of the indoor units provide a high head with an available static pressure of 100 Pa (10.0 mm H2 O). For the optimization and diversification of the air flows to be distributed, special "plenums" can be applied. Furthermore, the internal unit is supplied as standard with a pump to facilitate the disposal of the condensate, facilitating installation in false ceilings. Series features: Exchange batteries with large ventilation surface Rotary compressor for 18H and 24H models and Scroll type for 36H - 48H - 60H models Automatic defrosting system High silence High prevalence Self-diagnosis Autorestart Emergency power button Possible installation with PLENUM R-32 gas refrigerant Automatic condensation control Functions managed by the remote control Cooling down Dehumidification Heating Ventilation only Sleep Programmable On/Off timer Automatic operation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Indoor unit code: PS10 24HI Outdoor unit code: PS10 24HE Refrigerant: R32 Technology: Inverters Energy efficiency: Cooling efficiency SEER: 6.10 SCOP coefficient of performance: 4.00 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual energy consumption in cooling/heating: 402/1890 KWh/A Performance: Cooling capacity: 7.00 kW Heating capacity: 5.40 kW Air flow: 1208 m3/h Indoor unit sound pressure (db(A)): 50 Max Outdoor Unit Sound Pressure (db(A)): 62 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: inch 3/8"/5/8" Dimensions and weight: Indoor Unit (LxWxH): 1068x675x235 mm ; 26.8kg Outdoor Unit (LxWxH): 845x702x362 mm ; 56.8 kgs General characteristics Floor/Ceiling Design in the foreground Particular attention has been paid to the design of these machines with rounded and modern lines which have been designed for installation in elegant environments, either on the floor or on the ceiling. They are suitable for medium/large sized residential or commercial environments. The indoor unit is equipped with a large fin that allows the orientation of the main throw and a motorized oscillating deflector that allows a second positioning of the air flow using the remote control. The command and control electronic card, which is equipped with an Intronics microprocessor, is integrated with an important additional function called " Watchdog " which, in the event of a malfunction of the microprocessor due to sudden changes in voltage, automatically restores regular operation, thus avoiding dangerous current overloads to the microprocessor. Depending on the space available, this unit can be installed on the floor or on the ceiling. Series features: Exchange batteries with large ventilation surface Rotary compressor (Scroll type for models 36H-48H-60H) Automatic defrosting system Self-diagnosis Autorestart Emergency power button R32 gas refrigerant Automatic condensation control Functions managed by the remote control Cooling down Dehumidification Heating Ventilation only Sleep Air swing Programmable On/Off timer Automatic operation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

UNICAL COR C 24 kW METHANE GAS BOILER COMPLETE WITH FUME EXHAUST KIT Model: CoR C24 Nominal useful power kW 24 Seasonal heating energy efficiency ambient ηs % 86 Seasonal efficiency class for heating B Useful thermal power in high temperature regime. kW 23.8 Efficiency at nominal thermal power in high temperature regime η4 % 85.8 Useful power at 30% of nominal thermal power in low temperature regime kW 7.6 Efficiency at 30% of nominal thermal power in low temperature regime η1 % 91.3 Declared load profile XL Heating energy efficiency. of water ηWH % 86 Daily fuel consumption Qfuel kWh 22.64 Sanitary seasonal efficiency class A Specific sanitary water flow rate (Dt 30 °C) ''D'' l/min 11.5 DHW production in cont. Dt 25 K (mixed) l/min 13.2 Expansion tank capacity l 8 Condensate production max kg/h 4.0 Heating circuit pressure (min/max) 0.5/3.0 bar DHW circuit pressure (min/max) 0.5/6.0 bar IP X5D degree of protection NO class x 6 Dimensions (HxWxD): 700x420x345 mm; 40 kg Unical Cor Wall-hung gas boiler with water-cooled system burner, micro flames, Low NOx condensing (class 6) - sealed chamber - electronic ignition and power modulation - IPX5D - also for outdoors CoR is a wall-mounted condensing boiler characterized by very low emission of pollutants, thus falling within the new Class 6, the most restrictive currently in force. It works at high temperatures and therefore with radiator systems, and is specially designed to have a reduced formation of condensate with system return temperatures above 50°C. CoR is designed to produce hot water for space heating and also for sanitary use, with a sealed combustion chamber towards the environment (type C appliance). Characteristics: Ease of adaptation to the existing system: thanks to the excellent modulation ratio 1:3 and the nominal power of 24 kW with a minimum of 7.3 kW Optimized dimensions 700x420x345 mm (HxWxD) Forced ventilation system features nearly identical to conventional sealed boilers for easy retrofitting to existing exhausts Backlit digital control panel Wide choice of accessories including: - both modulating and on/off control thermostats - external probe for managing both the boiler and one or two high/low temperature zones CoR is designed to be reliable, guarantee very high water circulation and durability thanks to its design characterized by low pressure drops. The system's water-cooled burner, with micro flames, reduces emissions and at the same time recovers the heat produced to increase system efficiency. The standard automatic by-pass balances the hydraulic circulation in the boiler at all times. Sanitary heat exchanger in stainless steel with brazed plates. Perfectly sized, it ensures 13.3 l/min. with Δt 25K Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

Technical features Model: Indoor unit code: CS09 18HI Outdoor unit code: CS09 18HE Refrigerant: R410a Technology: Inverters Energy efficiency: Cooling efficiency SEER: 6.3 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual energy consumption in cooling/heating: 293/1855 KWh/A Performance: Cooling capacity: 5.20 kW Power absorbed in cooling: 1450 W Heating capacity: 5.80 kW Power absorbed in heating: 1410 W Air flow: 660 m3/h Indoor unit sound pressure (db(A)): 44 Max Outdoor Unit Sound Pressure (db(A)): 56.5 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/12.7(1/4"/1/2") Dimensions and weight: Indoor Unit (LxWxH): 570x570x260 mm; 16.5Kg Outdoor Unit (LxWxH): 800x554x333 mm ; 35.5Kg General characteristics Cassette Elegantly effective These machines, intended for recessed or false ceiling installation, are ideal for medium/large environments, such as bars, restaurants, large shops, meeting rooms, etc. The internal unit is enclosed by a completely insulated casing with a centralized fan which provides for the launch of the air through four vents located on the external sides and equipped with a special motorized deflector which distributes the air evenly and uniformly throughout the room. Installations in environments that often need to filter the air are favored, for example: restaurants, meeting rooms and smoking areas. Remote control, washable mechanical filter and replaceable carbon filter complete them. Series features:  Mechanical and electrostatic filters for air purification, washable and/or replaceable Rotary type compressor for 18H and 24H models and Scroll type for 36H and 48H models Automatic defrosting system High silence Self-diagnosis Autorestart Emergency power button Standard pump for condensate drain R410 A gas refrigerant Automatic condensation control Functions managed by the remote control Cooling down Dehumidification Heating Ventilation only Sleep Air swing Programmable On/Off timer Automatic operation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less