Technical Features Dimensions External Diameter: 16 mm Thickness: 1mm Roll Length: 50m Minimum Coating Thickness: 10 mm Burst Pressure : 28.05MPa Working Pressure : 7.01MPa Water content: 0.154 l/m SMISOL® Frio Fears neither the Heat nor the Cold It is the copper tube produced according to the EN 12735-1 standard (and ASTM B 68/M), and is pre-insulated in closed-cell expanded polyethylene of regular and uniformly distributed dimensions (UNI EN 14114). It is distributed in rolls, having the dimensions of the diameter of the tube in millimetres. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective polyethylene film aimed at preventing the formation of condensation on the external wall of the product. Internal Surface The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the plant. The particular internal cleanliness of SMISOL® Frio is safeguarded by closing the ends of each roll with caps, directly during the production phase. External Protection Closed-cell expanded polyethylene coating with an average value of the water vapour diffusion resistance factor “µ” greater than 15000. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment and has a fire behaviour of class BL-s1-d0 according to EN 13501-1. Coating Features Thermal conductivity: λ ≤0.040 W/m°C. Average value of the water vapour diffusion resistance factor “µ” greater than 15000. Average coating density: 33 kg/m3. Free from ammonia residues. Excellent resistance to external chemical agents. Non-flammable class BL-s1-d0 according to EN 13501-1 Free from CFCs and HCFCs (Reg. EEC/EU 2037/2000) Design Guidelines To avoid possible condensation phenomena on the pipe, it is necessary to check the environmental conditions in which the product is installed: relative humidity of the environment, temperature of the environment and of the fluid inside the pipe. In this regard, it is recommended to check using the Psychrometric chart Fields of Use Refrigeration. Transport of heat transfer fluids for multifunctional systems Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical Features Dimensions External Diameter: 6.35mm (1/4") - 9.52mm (3/8") - 12.70mm (1/2) Thickness: 0.8mm Roll Length: 50m From : External Diameter Sp : Thickness Minimum Coating Thickness Minimum Coating Thickness 1/4 : 6 mm Minimum Coating Thickness 3/8 : 8 mm Minimum Coating Thickness 1/2 : 10 mm Burst Pressure Burst Pressure 1/4 : 56.54MPa Burst Pressure 3/8 : 37.71 MPa Burst Pressure 1/2 : 28.27MPa Operating Pressure Working Pressure 1/4 : 14.14MPa Working Pressure 3/8 : 9.43MPa Working Pressure 1/2 : 7.07 MPa Water Content Water content 1/4 : 0.018 l/m Water content 3/8 : 0.049 l/m Water content 1/2 : 0.097 l/m SMISOL®Clim Platinum The climate specialist It is the copper tube produced according to the EN 12735-1 standard, and is pre-insulated in closed-cell expanded polyethylene of regular and uniformly distributed dimensions (UNI EN 14114). It is distributed in rolls. The diameter of the copper tube, as required by the EN 12735-1 standard, is expressed in inches. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective polyethylene film aimed at preventing the formation of condensation on the external wall of the product. SMISOL®Clim Platinum also stands out for its particularly low eccentricity values, a very important feature for the flaring operation. Internal Surface The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the system. The particular internal cleanliness of SMISOL®Clim Platinum is safeguarded by closing the ends of each roll with caps, directly during the production phase. Coating Features Thermal conductivity: l≤ 0.040 W/m°C Average value of the water vapour diffusion resistance factor “μ” > 15,000 Average coating density: 30 kg/m 3 Free from ammonia residues Excellent resistance to external chemical agents Non-flammable class 1 (DM 26/06/84) Fire behaviour: BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84) Free from CFCs and HCFCs (Reg. EEC/EU 2037/2000) Pigmentation of the outer film “Silver grey” Increased resistance to UV rays Halogen-free flame retardant Fields of Use Conditioning Transport of refrigerant gases. (R32, R410A, R407,...) In compliance with and within the limits set by the regulations. External Protection Closed-cell expanded polyethylene coating with an average value of the water vapor diffusion resistance factor “μ” greater than 15,000 . The insulating sheath is produced in full compliance with European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment and has a fire behavior of class BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84). The external polyethylene film contains a darker pigment than the traditional white in order to counteract the crystallization process of the PE. Furthermore, the normal anti-UV additives have an antagonistic effect on the flame retardant necessary for the product. In order to avoid this inconvenience, the SMISOL®Clim Platinum sheath contains an ecological halogen-free flame retardant that does not counteract the anti-UV action. Tests carried out according to the ASTM G-155 standard (accelerated aging) demonstrate that SMISOL®Clim Platinum is suitable for areas with strong annual solar radiation . At the end of the exposure test, the sample did not show any symptoms of degradation. Accelerated Aging Test The test involves a duration of 4,000 hours of exposure in a weatherometer with a CI65 Xenon lamp, which is equivalent in Kly to approximately 3 years of continuous exposure in Northern Italy or 2 years in Southern Italy. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

PP PIPE, GRAY. WALL THICKNESS:1.8.

Read more less

PRESS FITTING FOR MULTILAYER, TH SYSTEM.

Read more less

THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES

Read more less

REDUCTION MADE FROM SEAMLESS PIPE

Read more less

PURE STEARIC ACID IN STICKS OF 100 GR READY TO USE

Read more less

.

Read more less

THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES WHILE THE CODE WITHOUT "PO" IS A THREADED FITTING IN MALLEABLE CAST IRON WITH BLACK CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS " COMMERCIAL TYPE"

Read more less

THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES

Read more less

SCHEDULE 10 WELDING BEND MADE FROM WELDED PIPE

Read more less

COMPLETE WITH SINGLE LIP EPDM GASKET

Read more less