Pellet stove King 5 Mini 4.9 kW Bordeaux Wi-Fi Optional high efficiency - NEW cod. 99175 Technical features Overall power (max - min) 4.9 - 2.3 kW Rated power (max - min) 4.4 - 2.1 kW Hourly pellet consumption (max - min) 1 - 0.49 kg-h Efficiency (max - min) 92.32 - 89.63 % Flue outlet ø mm 80 Pellet tank capacity l - kg 17 - 11 Autonomy (max - min) h 22 - 11 Operating electric power W 75 - 315 Heatable volume 135 m3 Dimensions (L x D x H) 470 - 277 - 880 mm ; 45kg Remote control PELLET STOVES Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. KING 5 Minis Steel cladding Top ventilation Removable hearth Safety thermostat Weekly chronothermostat Remote control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€630,00
Note well! In the absence of immediate availability, the product will be ordered and shipped within 10 working days. Technical features Dimensions : 538x1034x543 mm Net weight : 170 kg Smoke outlet diameter: 80 mm heated m3: 344 m3 Power rendered to the liquid: 3.0-10.8 kW Ambient output power: 0.6-1.2kW Nominal thermal power useful : 3.6-12.0 kW Overall thermal power: 3.9-14 kW Efficiency : > 91 % Hourly consumption : 0.8-2.8 kg/h Total tank capacity : ~ 20 kg Forced ventilation : No Remote control : Yes Internal thermostat : No Safety thermostat : Yes External thermostat preset: Yes Power consumption: 110-130W Draft : ~1 mm H2O Pump and expansion tank : Yes Ext. air intake pipe : 50mm Weekly chronothermostat : Yes 3 bar safety valve : Yes *NB First ignition not compulsory for a fee, stoves already lit in the company! To view more product information CLICK HERE General characteristics PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. DUCHESS HYDRO STEEL Coating in painted steel Removable ash drawer Heat exchanger with manual cleaning system Safety thermostat Arrangement for external thermostat (TA) Weekly chronothermostat Remote control Circulation pump Expansion tank 3 bar safety valve Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.448,00
OFFER VALID UNTIL STOCKS LAST In order to purchase the product on delivery, a 10% deposit must be paid. Technical features Model : Diamond Heatable volume : 265 m³ White color Painted steel cladding, majolica top Structure: steel and cast iron Combustion chamber: Steel, cast iron and vermiculite Performance Power : 2.7 ~ 10.41kW Rated heat output: 2.58~9.29kW Hourly fuel consumption : 0.57 ~ 2.2 Chimney draft : 10 ~ 14 Power supply (V,Hz, Ø) : 220~240/50/1 Tank capacity: 22.0 Kg Dimensions and weight Dimensions (HxWxD): 1026x551x541 mm Weight : 105.0 kg FIRST LIGHTING EXCLUDED! Pellet stoves You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. Features of pellet stoves Brazier the brazier is easily removable for daily cleaning Electronics New electronics capable of predicting the weekly on and off programming Remote control new design multifunctional with LCD screen Shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise Secondary convention in the combustion chamber there is a secondary convection to improve the combustion of the pellets Combustion chamber removable steel walls to facilitate cleaning of pellet combustion residue Clean glass air emission near the glass to prevent it from getting dirty Grill The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms Ash collection drawer drawer placed under the brazier to collect the ash produced by combustion Safety stove complete with temperature probes to monitor correct operation in safety Fans Quietness of the stove even at maximum working power Pressure switch Safety device that signals any obstructions in the smoke outlet Pellet stove Anselmo Cola DIAMOND High performance Pellet stove with predisposition for external combustion air intake Standard remote control for remote operations Pellet stove with air heating Automatic cleaning of the cola patented cast iron brazier/brazier holder system Ventilated pellet stove with elegant majolica top and rounded steel sides. Double door in silk-screened round ceramic glass. New generation remote control, removable ash pan and handle. The saving of pellets The main energy savings in using a pellet stove compared to a traditional wood stove derives from the different calorific value. To this we add that pellets are also cheaper than normal fuels of petroleum origin as the cost in euros per kW of pellets is lower than that of methane and diesel. A higher return translates into significant savings. For example: Cola Stove with 90% yield VS Competitor Stove with 80% yield = €18.65 Monthly Savings* Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.453,00€1.162,00
Technical features Efficiency >86% Dimensions (LHP) 695x547x617 mm Net weight 140 kg Hourly consumption 0.7-2.4 kg/h Smoke outlet diameter 80 mm Total tank capacity ~ 20 kg Energy class A+ Environmental Certification DM186 3 STARS 278 m3 General characteristics PELLET INSERTS The “Comfort” Inserts: The optimal solution to integrate into an existing or newly installed fireplace. Easy to take out and load. Extraflame: heats the environment in harmony with nature COMFORT P70 Forced ventilation Removable ash drawer Removable cast iron hearth Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat (TA) Weekly chronothermostat Remote control Lifting handles to facilitate assembly Touch screen console Pellet hopper minimum level electronic sensor Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.867,00
LAMINOX PELLET BOILER MOD. THERMAL BOILER 24 MATIC WITH WHITE/ANTHRACITE DOMESTIC WATER Pellet storage boiler 24 kw TERMOBOILER 24 MATIC Available colours: white/anthracite Very high yield With automatic turbulator cleaning With mixing valve Corten steel structure Coating in painted steel with total insulation With summer/winter function Fuel: Pellets Maximum thermal power kW 24 Nominal thermal power kW 23 Thermal power rendered by water kw 21.5 Efficiency % 92 Water connections: 3/4" Heated volume: 600 m3 Sanitary production 9/11 l/min Average smoke temperature: 120°C Dimensions (HxWxD) mm 850x650x1425 Weight Kg 180 Flue (mm) 80 Hourly pellet consumption / Kg/h 4.8 Pellet tank capacity kg 70 Pump head: 6m Expansion tank: 10 lt Boiler capacity: 100 litres Operating pressure : 1.5 bar Power supply: 230V~ 50Hz Max power consumption: 480W LAMINOX LAMINOX is a reference company on the market for gas stoves and oil-filled electric radiators. Lastly, since 2005, Laminox has presented the LAMINOX IDRO line of pellet and wood-burning products to the public, born from the experience gained over the years and with the support of specialized technical personnel both in design and construction and in after-sales assistance. In this latest challenge aimed at the ecological wood, pellet and combined heating sector, the company guarantees products made with thick steel structures and safety guaranteed by a patented watertight sector valve which completely isolates the burner from the deposit of the pellets. The sophisticated design, the low noise, the excellent combustion for a high yield and the widespread after-sales assistance place the Laminox “Idro” articles among the first places of that production capable of responding to the needs of quality, reliability, safety and aesthetics. The articles are characterized by the interior in non-deformable cast iron, by the presence of furnaces that operate with reversed flames, by the general sturdiness due to structures made of steel and of considerable thickness and by the refined coatings ranging from steel painted with epoxy powders, to stainless steel, polished and satin or to ceramic cladding. Thermoboiler Brand new series of storage boilers, designed by the Laminox technical staff to meet market demands, capable of solving any type of problem linked to new pellet heating technologies. The new "termoboiler" line, aesthetically curated by the designer Raul Frollà, represents Laminox excellence from a technological, functional, efficiency and safety point of view. The thermoboiler boilers, in addition to having all the accessories already present on the other lines of Laminox boilers (Hidra), boast the following additional features as standard: Domestic water production h24 (9-11 l/min), very high efficiency class 5, summer/winter function via switch (winter heating + DHW/summer DHW only), equipped with fittings for connection to a solar panel, mixing valve on the outlet 'acs, automatic cleaning of the flue gas pass for IDRO 24 MATIC models, manual cleaning of the flue gas pass for IDRO 24 models, quick ignition - 3min, circular brazier with post combustion - CCS LAMINOX (Circular Combustion System), boiler storage tank capacity 100 l, tank pellet capacity 70kg, very low dust and CO emissions, magnesium anode, suitable for both low and high temperature heating. The IDRO 24 SOLAR and IDRO 24 SOLAR MATIC models include the coil for connecting the solar panels. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.051,00
3 in 1 Lavor Free Vac 1.0 12 liter vacuum cleaner bin Code 8.255.0001 CB 8013298066728 Volume 12 litres. Battery/Battery type 1x18V / Li-ion / 2.2Ah Autonomy/Full charge 25 min/4 h Vacuum/Flow 10 kPa/100 mbar - 20 l/s FREEVAC 1.0 Practical battery charger included. Ready to use in 1.5h (orange light). Fully recharged in 4h (green light). Eco energy system Allows you to adjust the suction power Eco Energy function: Energy saving Top Energy function: Maximum performance 18V Li-ion batteries Indispensable where there is no possibility of connection to the electricity grid (camper, boat, camping, car) Autonomy: 25 min in Eco Energy function 15 min in Top Energy function Equipment: 2 extension tubes 0.45 cm Flat spear The comfortable shoulder strap, the extensions with flat lance and the latest generation 18V Li-ion battery make FREE VAC 1.0 freely usable everywhere, wherever there is dirt to vacuum. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€59,00
Wood-burning fireplace NEW VULCANO 25 vertical retractable 2 exchangers with control unit included VOLCANO The Vulcano closed fireplace is a modern, efficient, functional, aesthetically pleasing product, with management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the interspaces of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant engineering capacities are completely similar to fossil fuel boilers: it can feed any type of heating system, with any type of piping, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating The thermal performance is also similar to fossil fuel boilers. In fact, it can correctly heat homes up to 320 m2, in any climatic zone and any energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. Furthermore, each model has an internal supply proportionate to its power which allows it to guarantee the supply for several hours even with the fire off. You consume The new models have even greater efficiency which allows them to consume about a third of the gas boilers and less than half of the pellet ones for the same amount of heat supplied. Management Charges of any size can be carried out, it does not need to be looked after, it can be used for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The smoke duct should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano fireplace stoves is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be required: heating, hot water, interface with other boilers, etc. Once the model suitable for your needs has been purchased, it can be connected directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings of the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano closed fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to change the combustion air, etc. In practice, you can also leave the house as you would with a classic fireplace, being careful not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater yield but nothing prevents you from keeping it open for cooking food or using the fireplace stove as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft in the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore it is not necessary to activate switches and stop keys and neither is it necessary to make adjustments or manual interventions of any kind. From a safety point of view, once the closed fireplace has been installed according to the instructions given in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.679,00
Pellet stove Laminox Jessica 7 Air color Black Global thermal power 6.6 kW Nominal heat output 2.5-6.0 kW Average efficiency 90.7% Indicative heatable volume 100/170 m³ Power supply 230V~ 50Hz Pellet tank capacity 21 kg Dimensions WxDxH 570x550x1055; 98kg LAMINOX LAMINOX is a reference company on the market for gas stoves and oil-filled electric radiators. Lastly, since 2005, Laminox has presented the LAMINOX IDRO line of pellet and wood-burning products to the public, born from the experience gained over the years and with the support of specialized technical personnel both in design and construction and in after-sales assistance. In this latest challenge aimed at the ecological wood, pellet and combined heating sector, the company guarantees products made with thick steel structures and safety guaranteed by a patented watertight sector valve which completely isolates the burner from the deposit of the pellets. The sophisticated design, the low noise, the excellent combustion for a high yield and the widespread after-sales assistance place the Laminox “Idro” articles among the first places of that production capable of responding to the needs of quality, reliability, safety and aesthetics. The articles are characterized by the interior in non-deformable cast iron, by the presence of furnaces that operate with reversed flames, by the general sturdiness due to structures made of steel and of considerable thickness and by the refined coatings ranging from steel painted with epoxy powders, to stainless steel, polished and satin or to ceramic cladding. Jessica 7 Air Compact pellet stove with a clean and linear design. The front is dominated by the vertical band of tinted glass, in visual continuity with the air diffusion fins. Available with integrated display of the top or with remote control. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.906,80
A 10% DEPOSIT IS REQUIRED FOR THE PURCHASES OF STOVES ON DELIVERY Pellet stove KALOR model GRETA 8 6.97 kW in steel various colors available Global heat output (max - min) kW 6.97 - 2.84 Nominal thermal power max - min 6.42 - 2.64 kW Hourly pellet consumption/ Hourly pellet consume. (max-min) kg/h 1.42 - 0.58 Performance/ Efficiency (max-min) % 92.7 - 92.06 Smoke outlet pipe diameter ø mm 80 Tank capacity Lt-Kg 20 - 13 Dimensions WxDxH 463 x 468 x 869 mm CALOR Kalor produces a complete range of highly efficient pellet-powered stoves: stoves for heating only the environment, thermo-stoves for heating air and water and fireplace inserts. The various production lines differ in design but are available in multiple powers to be efficient in the most diverse living contexts. The design of a pellet stove must guarantee efficiency and sustainability as the first objective. Our projects must be able to propose solutions capable of integrating the plant and energy aspects of the building with the architectural design choices in an innovative way. Our design skills reward us with the achievement of prestigious heat efficiencies but in general we are gratified to think that our heat system is able to interact effectively with the most modern integrated green systems such as photovoltaic and solar panels. Thanks to their effectiveness and efficiency, our stoves contribute to the classification of your home in energy class A. The stove: not only the cheapest source of heat but also for energy redevelopment of your home. Very high efficiency, in practical terms this means that: If 100% is the percentage of heat extrapolated from pellet combustion, 97.89% is the percentage of heat introduced into the environment, only 2.11% is the percentage of heat of exhaust fumes. These results were obtained thanks to a careful design capable of ensuring the maximum possible heat exchange. The vertical tube exchange surface involves the entire rear part of the combustion chamber which is lined with refractory material, ensuring low emissions of fine particles. GRETA Combustion chamber with mirrored walls for greater resistance. Round brazier to ensure better combustion. The air coming from outside is intended, in addition to combustion, also for cleaning the glass. The internal bulkhead of the combustion chamber dedicated to the flue gas pass. The 13 tubes in the shell and tube are reduced in diameter to eliminate turbulence and boost outlet air pressure. To preserve the refined aesthetics, the handle can be fully inserted into the door. The combustion chamber can be disassembled in 8 steps for easy cleaning of the smoke pass. 1) upper flame breaker extraction, 2) extraction of the right external bulkhead 3) extraction of the right internal bulkhead Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€930,00 - €950,00
Technical features Efficiency > 90% Dimensions (LHP) 702 x 576 x 673mm Net weight 170km Hourly consumption 0.7 - 2.5 kg/h Smoke outlet diameter 80 mm Total tank capacity ~ 16 kg Energy class A+ Environmental Certification DM186 4 STARS General characteristics PELLET INSERTS The “Comfort” Inserts: The optimal solution to integrate into an existing or newly installed fireplace. Easy to take out and load. Extraflame: heats the environment in harmony with nature COMFORT PLUS CRYSTAL Forced ventilation Removable cast iron hearth Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat (TA) Weekly chronothermostat Remote control Touch screen console Ducting up to 6 meters via 1 Ø80 rear outlet (thermostable) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.442,00
A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : 533x1157x583 mm Net weight : 178 kg Smoke outlet diameter: 100 mm heated m3: 407 m3 Power rendered to the liquid: 3.0-11.7 kW Ambient output power: 1.3-2.6 kW Nominal thermal power useful : 4.2-14.2 kW Overall thermal power: 4.5-15.4 kW Efficiency : 90 % Hourly consumption : 1.2-4.3 kg/h Total tank capacity: ~ 30 kg Forced ventilation : Yes Remote control : Yes Internal thermostat : Yes Safety thermostat : Yes External thermostat preset: Yes Power consumption: 130-150W Draft : ~1 mm H2O Pump and expansion tank : Yes Ext. air intake pipe : 50mm Weekly chronothermostat : Yes 3 bar safety valve : Yes *NB First ignition not compulsory for a fee, stoves already lit in the company! PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. General characteristics MELINDA IDRO STEEL 2.0 Coating in painted steel and majolica top. Removable ash drawer Ceramic glass resistant to 750°. Standard circulation pump and expansion vessel. Heat exchanger with manual cleaning system. Front ventilation with the possibility of exclusion. Safety thermostat Internal thermostat Arrangement for external thermostat Weekly chronothermostat Remote control Circulation pump Expansion vessel 3 bar safety valve This product is certified 4 stars according to the emissions and performance requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL system that allows any malfunctions relating to the hydraulic pressure to be displayed on the display DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.622,00
Technical features Overall power (max-min): 23.6 - 5.4 kW Rated power (max-min): 22.14 - 5.1 kW Power delivered to water (max-min): 18.1 - 3.9 kW Power delivered to the environment (max-min): 3.8 - 1.8 kW Hourly pellet consumption (max-min): 4.04 - 1.2 kg-h Efficiency (max-min): 95.4 - 93.8% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 64.6 - 42 litres-kg Autonomy (max-min): 39 - 9 h Operating electric power: 140 - 350 W Dimensions (WxDxH): 611x671x1266 mm Weight: 230kg With remote control and room fan General characteristics PELLET THERMOSTOVES The wood or pellet thermo-products make use of technologically advanced design solutions which allow the thermal power of the fire to be exploited both to heat the room and to produce hot water which feeds the traditional radiator system of the whole house. This double use makes the thermo-products unique in their kind and allows an optimal thermal yield and considerable savings. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet
€2.509,00
You have seen 120 out of 417 products
