icon Gas stoves | CaldaieMurali

Gas stoves

Heat your space with our modern gas stoves. Energy efficiency, ease of use and elegant design. Choose from our selection of gas stoves for fast, adjustable heat at the touch of a button. Buy today and enjoy a warm and comfortable environment with ease!

41 products


  • immagine-1-no-brand-stufa-a-gas-metano-sicar-eco42t

    Sicar Methane Gas Stove Sicar Eco42t

    Methane gas stove Sicar Eco 42T Natural gas ECO 42T model (tangential fan). Max power 4200W. Can be installed on the wall or on the floor. Equipped with oxygen exhaustion sensor and anti-overturning safety switch. Heatable volume 110 m3. Dimensions cm 43x15x64H.

    €159,63

  • Gas Stove Radiator Italkero Poster Sp70 7.35 Kw LPG Or Methane Silver Gray With Smoke Kit

    Italkero Gas Stove Radiator Italkero Poster Sp70 7.35 Kw LPG Or Methane Silver Gray With Smoke Kit

    Gas Stove Radiator Italkero POSTER SP70 7.35 kW LPG or Methane With Smoke Kit Code: SP70M0 M0300 (for LPG-powered appliances (SP70M0 L0300) Max/min heat output: 6.8/4.8 kW Max/min thermal power: 6.28/4.37 kW Efficiency at nominal thermal power: 92.4 Max heatable volume: 197 m3 Fan air flow: 335 m3 /h Consumption G20 Nom. 0.719m3/h Consumption G30 Nom. 0,530 Kg/h Voltage and frequency: 230-50V-Hz Absorbed electric power: 70 W Electrical protection: IP20 Noise at 3m 35 db A Suction/exhaust hose Ø 32 or 54 Ø mm Net weight: 34kg Dimensions WxHxD: 835x585x200 mm Power supply: It works both with LPG and methane gas. POSTERS Gas convector with forced combustion and sealed chamber. Heating power from 2.3 kW to 7.87 kW. The gas convector is equipped with a digital chronothermostat with backlit display. A new way of conceiving heat, a wireless chronothermostat (accessory) to control all your appliances, a technical choice that allows for significant energy savings. Available models: SP 30 max power 2,3 min 1,53 kw    length 53cm SP 50 max power 4.3 min 2.98 kw    length 68cm SP 70 max power 6.28 min 4.37 kw length 86 cm SP 90 max power 7.87 min 5.22 kw length 98 cm Forced Draft Balanced Flow Stove Diameter of intake and exhaust pipes with reduced section Double suction and discharge pipes Ionization flame control Convection fan that allows you to reach the desired room temperature earlier Other characteristics: Hot air outlet from above, an immediate sensation of heat. Programming and temperature regulation with wireless, wireless (accessory) daily/weekly room thermostat that can always be combined with a simple recognition procedure. Design product with built-in humidifier tray Telephone ignition kit accessory. Installation on non-load-bearing "floor standing" walls (optional) Double stage of modulating power. The radiator works both with LPG and methane gas. Simple, Reliable, Durable, Italkero! Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €790,00

  • immagine-1-italkero-radiatore-stufa-a-gas-italkero-stratos-mb-9.0-metano-o-gpl-774-kw-colore-bianco-con-kit-fumi-99710446

    Italkero Gas Stove Radiator Italkero Stratos Mb 9.0 Methane Or LPG 7.74 Kw White Color With Smoke Kit 99710446

    Technical features Model : Stratos 9.0 Maximum capacity: 8.60 kW Minimum capacity 5.70 kW Maximum power : 7.74 kW Minimum power : 5.13 kW Efficiency : 90 % Efficiency / NOx : 1/5 Heatable Volume* : 246 - 143 m³ Fan air flow: 419 m³/h Consumption G20 Nom./Red. : 0.909 / 0.603 m³/h Consumption G30-G31 Nom./Red. : 0.626 / 0.446 Kg/h Nom./Red. G20 nozzle pressure : 11/6 mbar G30-G31 nozzle pressure Nom./Red. : 29-37 / 15-18mbar 3 nozzles G20/G30-31 : 1.50 / 0.85mm Power supply : 230/50V/Hz Gas : LPG Absorbed power : 60 W Protection : IP20 Gas category : II 2H 3+ Maximum pipe length 32/54 : -/10 m Gas connection tube: 3/8" Dimensions and weight Dimensions L/H/D : 985 / 585 / 200 mm Weight : 38.1Kg General characteristics The innovative gas stove, thanks to the hot air outlet from below, guarantees a continuous and uniform distribution of heat, avoiding its stratification. Great comfort and energy savings thanks to the automatic modulation of the thermal power and fan speed. The diameter of the pipes can be 32 or 54 mm and the length up to 15 meters, forced combustion, sealed chamber. It works on both LPG and METHANE gas. Modern and elegant design. 100% made in Italy product designed by Francesco Gomez Paz. Standard equipment Standard suction and flue gas exhaust pipe kit L 50 cm (Ø 32 for mod. 3.0 - 5.0 and Ø 54 for mod. 7.0 - 9.0) Manual command Conversion kit to LPG or CNG REMOVABLE humidifier tray. Programmable temperature Programmable temperature thanks to the daily/weekly wireless programmable thermostat (accessory). A new way of conceiving heat, a wireless chronothermostat to control all your Stratos, a technical choice that allows for significant energy savings and avoids air stratification in the rooms where it is installed. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €981,00

  • immagine-1-fondital-radiatore-a-gas-stufa-convettiva-fondital-modello-gazelle-evo-7000-gpl-da-588-kw-kit-fumi-in-omaggio

    FONDITAL Gas Radiator Fondital Convection Stove Model Gazelle Evo 7000 Gpl From 5.88 Kw Complimentary Smoke Kit

    Technical features Model : Gazelle Evo 7000 Typology : Gas radiator Rated power :5.88 kW Minimum power : 4.2 kW Maximum absorbed power: 30 W Useful efficiency at nominal heat output: 91.8% Useful efficiency at minimum thermal power: 94% Nominal heat input : 6400 W Reduced thermal input : 4500 W Rated thermal power: 5880W Reduced thermal power : 4230 W NOx emission class : 5 Energy class: A Power supply: LPG Supply Voltage/Frequency : 230 - 50 V/Hz Combustion chamber : Forced draft Electrical protection degree : 20 IP External diameter of straight exhaust pipes (C13) : 2 x 55/2 mm External diameter of split pipes (C53): 35 or 60 mm Gas connection diameter: G 1/2 M inches White color Dimensions LxHxP : 772 x 550 x 195 Weight : 28Kg NB* 2 x 55/2 refers to n2 pipes (one for air intake and one for flue gas discharge) each having the same shape as a semicircle with a diameter of 55 mm General characteristics NEW GAZELLE EVO The Strength of EVO lution The single gas convection stove with a heat input of less than 5 kW is not considered a heating system, therefore one might think that there are no legislative obligations to carry out periodic annual maintenance. In reality, even when the convective gas stove is not considered a heating system, only the obligation of energy efficiency control falls but all the prescriptions contained in the supplier's instruction booklet remain valid, which has always prescribed annual maintenance by qualified personnel . Maintenance allows the machine to work in the best conditions of efficiency and safety, thus allowing fuel savings, better environmental well-being and prolonging the life of the machine. An extraordinary one must also be added to the periodic maintenance, in case of breakage or wear of the device. According to the provisions of Ministerial Decree n.37 of 22 January 2008, the installation and maintenance of the appliances must only be carried out by expert professionals who must issue the declaration of conformity of the product itself. By professionally qualified personnel we mean those having specific technical competence in the sector of components of heating systems for civil use, or qualified according to the legislation in force. To guarantee maximum efficiency and safety of the appliance, it is therefore recommended to have the inspection certificate completed by an authorized Technical Assistance Center (TAC). In reference to the installation it is good to consider some guidelines: • The appliance must be installed on walls directly communicating with the outside, alternatively alternative installations must be arranged, always in compliance with current regulations. • The correct distance from other surrounding elements must be respected as follows: Gas convection stoves , such as the Gazelle Evo, are an excellent solution in terms of efficiency and safety for heating domestic and industrial environments but, like any other product, they must be used and maintained with care and precision. By relying on one of our experts, you will therefore be able to benefit from all the advantages of our products in the safety of your own home. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €813,00

  • immagine-1-accoroni-radiatore-a-gas-accoroni-ghibli-5-elite-elettronico-437-kw-metano-o-gpl

    Accoroni Accoroni Ghibli 5 Elite Electronic Gas Radiator 4.37 Kw Methane Or LPG

    Accoroni Ghibli 5 Elite gas radiator electronic 4,37 kW Methane or LPG Thermal power 4.37 kW Fan air flow 180 m3h Gas supply diameter G 3/8" Feed diameter air/flue gas outlet mm 65 Power supply 230V/1/50Hz Absorbed power W 80 Sound level at 3m dBA 29.5/31.5 Dimensions WxHxD 807x366x624 THE SUPPLY INCLUDES: LPG conversion kit, intake/exhaust pipe, dehumidification tray, exhaust terminal, gas cock. Ghibli The cover is made of epoxy powder coated steel sheet, with side panels in heat-resistant nylon. The two grilles for air intake and delivery are located respectively in the lower area and in the upper area of ​​the casing. The control panel is located on the front of the appliance, which includes: - the on/off switch - the convection fan speed switch (models 5 and 6) - the release button of the burner command and control box - the block status (red) and heat request (green) light signaling LEDs - the room thermostat adjustment knob In the back you will find: - the connection for the combustion air inlet and combustion products evacuation duct - the holes for fixing the appliance to the wall Inside the appliance you will find: - the combustion chamber and the finned heat exchanger with the fume extraction fan located downstream of the circuit - the atmospheric burner with axial flame development complete with ignition and flame detection electrode - the tangential convection fan in the GHIBLI 4 Elite model and the centrifugal type with double impeller and central motor in the Ghibli 5 and 6 Elite models - the fan control and safety thermostat - the electrical panel including the burner control equipment, the gas unit and the room thermostat The GHIBLI ELITE gas radiator is ideal for heating or integrating space heating, even for occasional use in buildings to be renovated and holiday homes. ELITE IN SAFETY The special steel combustion chamber is completely sealed and in depression, with the fan placed downstream of the combustion circuit, to make the appliance extremely safe. 1) Sealed combustion circuit with respect to the environment 2) Circuit under depression with respect to the environment 3) The combustion circuit of the appliance, thanks to the fumes extraction fan placed upstream, is constantly under depression with respect to the environment in which it is installed. In this way, any deterioration in the tightness of the circuit (due exclusively to anomalous operating conditions) will never cause the release of unburnt or toxic gases into the internal environment. ELITE IN CONSTRUCTION The nickel-plated exchanger is equipped with special fins to increase the efficiency of the heat exchange. The particular design of the burner allows a low value of polluting emissions of both CO and NOx. The suitably studied geometry of the shell allows for external contact temperatures (even accidental) in line with the strictest regulations. The chamber made entirely of steel with a nickel-plating treatment makes the Ghibli Elite gas radiator extremely resistant, long-lasting and pleasing to the eye. Thanks to the use of high air flow rate fans with reduced number of revolutions, a comfortable air outlet temperature and good silence are obtained, without the danger of getting burned if the external covering mantle is accidentally touched. ELITE IN DIMENSIONS The dimensions are the most compact ever among the products on the market. The very low height allows easy installation under the window. SPLITTER With the splitter it is possible to solve the problems due to the positioning of the smoke outlet. The intake and exhaust ducts are separated and can cover distances of up to 3m each. Using the 90° bends it is possible to bring the ducts sideways. For each bend it will be necessary to reduce the total length of the 3 m air duct by 50 cm. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €595,72

You have seen 41 out of 41 products

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account