VAILLANT GAS WATER HEATER for outdoor outsideMAG IT 16-5/0-5 METHANE Technical features ErP energy class: Class A Sanitary load profile: XL Reduced heat output - nominal kW 7.7 - 31.0 Permissible operating pressure range 0.2 - 10 bar Domestic hot water regulation temperature °C 38-60 Minimum hot water flow l/min 2.5 Domestic hot water production (ΔT = 25K) l/min 16.0 Domestic hot water production (ΔT = 35K) l/min 11.4 Power supply V/Hz 230/50 Total electric power W 123 Electric power without antifreeze device W 51 Dimensions HxDxL mm 609-180-413; 21 Kgs Sound power dBA 68 IP degree of protection IP X5D OutsideMAG The outdoor water heater that you control from the inside: simple to install and no encumbrance inside the house. The outsideMAG range of water heaters was designed and built to be installed outside the home and, thanks to the standard antifreeze protection, to withstand temperatures down to -25°C. The new version of outsideMAG water heaters has undergone significant improvements in domestic hot water production performance. The new forced draft outdoor versions with DHW flow rates of: 11, 14 and 16 litres/minute with Natural Gas and LPG, guarantee perfect temperature stability in dispensing. Vaillant has designed this new range to operate outside the home by increasing protection up to -25°C, as standard. They are very simple to install and do not require connections to the flue since they have a front outlet already integrated in the front panel (Type A approval). The new outsideMAG water heater stands out for its modern design that can be inserted in any external environment. The exclusive front air intake always ensures the right supply of oxygen for the correct functioning of the appliance, also giving it an unmistakable aesthetic touch. The materials used are particularly thick and designed to last over time even in contact with the elements. Touch interface for very simple comfort management. A special function allows to reduce the risk of overflowing from the tank during the DHW outlet through a loud acoustic signal. outsideMAGs are very simple to install. If there is no flue it is possible to install them anyway since they have a facade exhaust already integrated in the front panel (type A approval). For installation checks, always contact a qualified installer. They can be positioned on the balcony in a suitable position that complies with the regulations in force and the minimum distances to also facilitate the performance of any maintenance operation on the appliance. The new outsideMAGs are also characterized by a modern and sober design conceived to fit harmoniously into any type of external environment, from the balcony, to the terrace, to the veranda, to the garden. The outdoor water heater The Vaillant outsideMAG range of outdoor water heaters is available with volumes of 11, 14 and 16 liters per minute (in natural gas and LPG versions) to meet any domestic hot water need in a residential setting. All operations on the water heater are managed from inside the home. Thanks to the multitouch control panel, supplied as standard with the outsideMAG, you just need to touch the display functions with a touch of your finger to increase the water temperature whenever you want. But not only. You can also set the amount of water needed to fill the bathtub, thus preventing it from overflowing (bathTUBE function). Through the display it will always be possible to keep the water temperature and, in general, the functioning of the water heater under control. The compact dimensions of these outdoor water heaters allow installation even in the smallest niches. Never before so much comfort in so little space. High hot water production (up to 16 l/min) Equipped with acoustic signaling system to prevent water from escaping from the bathtub Reliability of every single component tested by Vaillant LabTest Frost protection down to -25°C Equipped with multitouch display to control the appliance from inside the home Where possible, it does not require a fume exhaust Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER BAXI mod. ACQUAPROJET 11I METHANE, Open Room WITH NATURAL DRAFT. Technical specifications Gas instantaneous water heaters Chamber Open to natural draught Nominal heat input kW 21.8 Nominal thermal power kW 19.2 Minimum thermal power kW 7.7 Minimum heat input kW 8.8 Operating water pressure 0.2-6 bar Water withdrawal range l/min 3-11 Maximum outlet water temperature C 65 Discharge pipe diam. 113mm Dimensions hxwxd mm 585x360x220 ; kg 10.5 METHANE version Features list ACQUAPROJET: the NEW instantaneous gas water heater Baxi offers a new instantaneous gas water heater, with Open Chamber and 2 Chamber models - Sealed Chamber water heaters of 11 and 13 l/min Open Chamber Models 11- 13 l/min Battery electronic ignition Electronic detection of flame presence Gas valve with modulation proportional to the water flow rate to keep the outlet temperature stable Minimum ignition flow 2.9 l/min Battery status LED indicators LPG conversion kit available as an option Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Energy class B L sampling profile Power supply 2x 1.5 V LR 20 Mechanical ignition Nominal heat input (min-max) 10.5 - 27 [kW] Nominal thermal power (min-max) 9 - 23 [kW] Water pressure (min-max) 0.2 - 10 [bar] Minimum operating temperature 5°C Air flow required for combustion 45.4 m3/h Minimum draft 12 Pa Characteristics Over-temperature thermostat Flame detection electrode Exhaust gas overheating detector Copper exchanger for greater durability Simple temperature setting, two knobs, one for regulating the water flow, the other for the gas level Led light that signals the need to change the batteries Excellent compatibility of water and gas connections for all installation conditions Dimensions Dimensions (HxLxW): 580x370x225mm

Read more less

Technical features Model: Bandini ST 50 Thermal dispersion 65° (KWh/24h): 0.98 Electric Power: 1200W Voltage (V): 230 Heating time (Δt 50°): 170' Maximum Operating Temperature (C°):75 Maximum Operating Pressure (bar): 8 Humidity protection: IPX4 Insulation class: l Profile: M Energy Class: C Dimensions: A(510); B(460); C/E:(100-175); F(130); G(250); H(20); l(130); M(240). Warranty: 2 years General characteristics VERTICAL ST Wall mounted thermoelectric storage water heater, 50 litres, vertical installation, with heat exchanger. - Internal coil. - Available with right and left attachments. - Glass-porcelain internal boiler. - Polyurethane foam insulation. - Magnesium anode. - Armored resistance in copper. - Flange. - Double safety thermostat. - External thermometer. - Safety valve. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Atlantic EAN: 3410538511836 Capacity: 80L Data sheet Absorbed power (W): 1200 Voltage (V): 230 (220-240) Energy consumption (kWh/24h at 65°C): 1.40 Heating time at 35°C (Δt=20°C): 2h15 Heating time at 60°C (Δt=50°C): 3h09 Dimensions H: - OR: - A: 814 B: 433 C:590 Q: 451 E: 165 F: 300 G:240 Inspection flange (Ø-mm): 72 Net weight (Kg): 20 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER Technical features Model : MICRO X SGA 45 Code : 3211008 EAN: 5414849824942 Power supply: methane Technical data Capacity: 45L Thermal power: 5 kW Useful power: 4.3 kW Heating time (ΔT= 45°C): 53 h, min. Continuous water at 40°C: 105 l/h Water in the first hour at 40°C: 180 l Natural gas consumption G20: 0.53 m3/h Max working pressure: 8 bar Dimensions and weight Dimensions (LxHxP): 400x860x390 mm Weight : 26Kg Ariston MICRO X SGA 45 water heater Low NOx: Complies with 09/26/2018 Operation without electrical connections Enamelled water heater Magnesium anode Piezo ignition system Triple safety valve Legend E: Cold water inlet G 1/2" U: Hot water outlet G 1/2" G: G 1/2" gas inlet Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Electric water heater Ferroli Model Calypso Smart Ho 150 liters Horizontal Technical features Model : Calypso Smart 150 HO Tank capacity : 150 Electric Power: 1500 W Heating time 4h - 15 min Load profile : L ERP class : C Temperature regulation range 40-80 °C Ho Horizontal installation Power Source 220-240V 50/60Hz Annual Electricity Consumption (AEC) 1251 Acoustic power level 15 db Smart controls Code E610B7KA Warranty : 2 Years Dimensions and weight : Height/Width 1130mm Maximum diameter 438 Empty weight 35kg Calypso Smart Medium Liter Electric Water Heaters Electric storage water heaters with very high efficiency, vertical and horizontal development with capacities from 50 to 150 litres. Endowed of : Electronic control of the '' SMART '' type able to optimize consumption according to the user's needs Control panel with luminous LEDs for reading the operating temperatures and operating status and convenient buttons for managing the water heater Magnesium anode to protect the tank 5-bolt flange to ensure sturdiness and facilitate periodic maintenance Safety valve set at 8 bar Supplied with three-pole electric cable without plug Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Atlantic EAN: 8033158041832 Capacity: 50L Data sheet Absorbed power (W): 1200 Voltage (V): 230 (220-240) Energy consumption (kWh/24h at 65°C): 0.95 Heating time at 35°C (Δt=20°C): 1h32 Heating time at 60°C (Δt=50°C): 1h53 Dimensions H: - OR: - A: 581 B: 433 C:380 Q: 451 E: 165 F: 300 G:240 Inspection flange (Ø-mm): 72 Net weight (Kg): 16 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS DENT ON THE BOTTOM AND THE SIDE AND THE PACKAGING IS NOT ORIGINAL (SEE PHOTO) Technical features Model: Calypso 150 Vertical Tank capacity: 150L Electric Power: 1500W Heating time: 4h - 15 min dimensions: 123.5 x 19.5 cm; 35kg Warranty: 2 years General characteristics   CALYPSO BIG LITRAGGI ELECTRIC WALL-MOUNTED WATER HEATERS For indoors The CALYPSO electric water heater is made of high quality steel, with a special powder enamel treatment inside the cylinder, created with advanced electrostatic application techniques and subsequent kiln firing at 850°C for perfect glass porcelain coating of the tank. To keep heat loss to a minimum, CALYPSO has been insulated internally with high density polyurethane foam without CFC content, externally with a polymer coating with high resistance to heat loss. All models are 100% tested to ensure perfect operation at the intended operating pressure. CALYPSO water heaters can boast three safety devices: a hydraulic valve which is activated in the event of overpressure in the internal tank and two automatic overtemperature protection systems. Characteristics: Models with capacities from 50 to 150 litres. Also available in mixed thermo (MT) version. Removable electric resistance in copper Probe thermostatic control. Magnesium anode to protect the tank. 5-bolt flange to ensure sturdiness and ease of periodic maintenance. Temperature level indicator. On/off light. Safety valve calibrated at 8 bar with drain cock and safety screw External manual temperature regulation (vertical models). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Savio SAVINO HE 16S Low NOx Methane Gas Sealed Chamber Water Heater Complete with Flue Gas Exhaust Kit Scaldaqua Plus 16S Nominal heat output (Hi) kW 30.0 Maximum water flow rate (increase at 25°C) kg/min 16.0 Device type C 13-33 Maximum water pressure (Pw) bar 10 Minimum water pressure (Pw) bar 0.2 Power supply 230 V ~ 50 Hz Electrical protection degree IPX4 Ignition method Automatic pulse ignition controlled directly by the water opening Destination countries IT Gas inlet connection G 1/2 Cold water inlet connection G 1/2 Hot water outlet connection G 1/2 Exhaust pipe diameter mm Ø 60 x Ø 100 ErP DATA XL load profile Energy efficiency of water heating system (ηWH) % 80.5 Energy efficiency of water heating system A Daily gas consumption (corrected) kWh 24,845 Daily electricity consumption (corrected) kWh 0.061 Annual electricity consumption AEC (kWh) 14 NOx mg/kWh 47 Internal sound power level (LWA) dB 63 NOx class 6 Product code 10116.1000.0/0 Dimensions HxWxD 667x345x186 SAVINO Low NOx emission wall mounted gas water heater Available in 12 kW, 14 kW and 16 kW versions with very compact dimensions Energy saving This product features advanced technologies called Strengthened Combustion and Forced Combustion. These two patents enable the best use of thermal energy with high operating efficiency. Ease of use Thanks to the digital control panel with large display, the user can communicate easily and conveniently with the boiler. Digital control to automatically maintain constant the outlet water temperature This function continuously checks the outlet water temperature using a sensor and transfers the data to a microprocessor. The microprocessor adjusts the gas and water quantities delivered to automatically maintain a constant outlet water temperature based on the value set by the user and the actual inlet water temperature. Digital control to automatically maintain constant the outlet water temperature This function continuously checks the outlet water temperature using a sensor and transfers the data to a microprocessor. The microprocessor then adjusts the gas and water quantities delivered to automatically maintain a constant outlet water temperature based on the value set by the user and the actual inlet water temperature. Set the temperature with one touch To set the required temperature, simply touch the digital display. The water temperature can be set between 35°C and 65°C, allowing you to meet different needs with maximum ease of use. Multiple safety protection This product is equipped with various safety protections, including: • Self-control system protection • Auto power off protection, • Overheating protection • Protection against accidental power failure • Fan failure protection • Electrical overload protection • Protection against current leakage • Protection from excessive wind pressure • Protection from excessive temperatures • Timed protection “AI” Artificial Intelligent Memory Function When restarted, the gas water heater can work with the last previously set temperature. No need to set the temperature again, a great practical application of the idea of ​​ergonomics. Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION The boiler will be supplied with methane with the nozzle kit included for the LPG transformation. Contact the local authorized assistance center in advance for the conversion to LPG. NB THE PRODUCT IS MADE TO ORDER Technical features Model : S/SGA LAT X 50 Code : 3211004 Power supply: methane Energy class: B Pickup profile: M Technical data Capacity: 48L Thermal power: 5 kW Useful power: 4.3 kW Heating time (ΔT= 45°C): 51 min. Continuous water at 40°C: 105 l/h Water in the first hour at 40°C: 185 l Natural gas consumption G20: 0.53 m3/h Max working pressure: 8 bar Dimensions and weight Legend A: 373mm B: 279mm E: Cold water inlet G 3/4" U: Hot water outlet G 3/4" G: G 1/2" gas inlet Ariston S/SGA LAT X water heater Low NOx: Complies with 09/26/2018 Side valve for ease of installation Operation without electrical connections Piezo ignition system Enamelled water heater Magnesium anode Operation even at minimum water pressures Gas valve with triple safety Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive   Sanitary Energy Efficiency : Class A Load profile: M Exercise features: Open chamber with natural draft Ignition - 1.5 battery Flame control - by ionization Rated thermal power: 19kW Hot water production Δ T=25°C: 11 l/min Min/max pressure bar 0.3/10 Ø water and gas connections - 1/2” Dimensions (HxLxP): mm 580 x 310 x 215; 9.5 kgs The guarantee is the Official Beretta Italia one, and has a duration of 24 months Power supply: LPG General characteristics SOURCE 2 DGT Fonte 2 DGT, hot water in compact dimensions From Beretta's experience and technological research comes the new line of Fonte 2 DGT water heaters, designed to offer maximum sanitary comfort, maximum energy savings and greater ease of use. Thanks to its extremely compact dimensions, Fonte 2 DGT can also be placed in limited spaces and therefore represents the ideal solution to meet the installation needs of modern living contexts. The range, open ionization chamber with battery ignition, two water filters as standard and with codes for both methane and LPG, is made up of the Fonte 2 DGT versions with 11 and 14 litres/min models and Fonte 2 DGT FLEX with a from 11 litres/min. The FLEX versions also include the hoses and the sanitary tap. Source 2 DGT: high energy class and low consumption The Fonte 2 DGT line of water heaters is equipped with the special device known as the Economiser, specifically designed to combine maximum user comfort with significant energy and cost savings. The activation of the Economiser in fact allows to reduce the gas consumption up to over 50%, limiting the maximum thermal power supplied, when the usage requirements are contained (low temperature difference or reduced sampling flow rates, such as for example during summertime). Furthermore, on all Fonte 2 DGT models, the Economizer can be adjusted progressively by the user, according to needs, achieving maximum savings in the low flame position. Finally, the appliances in the Fonte 2 DGT range are equipped with flame modulation which, by adapting gas consumption to individual withdrawal requests, allows the temperature of the water supplied to be kept almost constant, compatibly with the settings made and the power of the water heater. The Beretta Fonte 2 DGT water heater guarantees always very low gas consumption and respect for the environment. Beretta Fonte 2 DGT complies with the current ERP regulation placing itself in CLASS A for energy consumption. Functionality and ease of use The Fonte 2 DGT water heaters, with a linear and essential design, have an ergonomic dashboard which houses two knobs which allow you to manage all the functions of the appliance in a simple and intuitive way and a display which shows the temperature of the domestic hot water produced. The left knob, in addition to the on/off functions, activates the "Gas economiser" device, adjustable between the small flame and the large flame, allowing the user to make an interesting gas saving. The right knob allows you to set the temperature of the water supplied, by regulating the quantity of water at the outlet Characteristics: Instantaneous open chamber water heater with Natural Gas and LPG versions Abundant production of domestic hot water: 11 or 14 litres/min Digital display with indication of domestic hot water temperature Battery ignition and ionisation flame presence control Gas economizer with 8 regulation steps Modulating flame regulation system Simple and intuitive control panel Compact size and simple installation without removing the shell Assembly template supplied (gasket and hose holder for LPG versions) New easy access water connections on the same horizontal axis New latest generation water/gas group with integrated gas pressure regulator Double inlet water filter Safety microswitch to protect the batteries (2 x 1.5 Volt type D) in the OFF position Temperature selector FLEX versions with flexible fittings and standard tap Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations issued at the same time for the energy labeling of products to supplement the corresponding Directive 2010/30/EU will also become effective. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less