NB IN CASE OF ABSENCE OF THE PRODUCT THE 2019 MODEL OPALIA LOW NOX WILL BE SHIPPED !!!!!!!!!!!!!!!!!!!!!!!!! Technical features Forced draft sealed chamber Efficiency class: A Sanitary load profile: M Min/max rated power: kW 6.4 - 19.2 Type of regulation: Modulating Ignition type: Electronic Specific flow rate (∆T=25 K): l/min 11 Minimum ignition flow l/min 2.7 Minimum supply pressure bar 0.1 Characteristics Electronic ignition board for: intermittent pilot flame ignition and to control the lack of burner flame. Flame modulation in relation to the temperature detected by the probe at the exchanger outlet Safety thermostat which blocks the water heater in the event of domestic hot water overheating at the exchanger outlet. Modulating gas valve. Flow sensor. Copper lamellar heat exchanger. Smoke pressure switch Standard antifreeze system (water heater ignition at 7 °C)  Dimensions Dimensions (HxWxD): 627x348x240 mm Weight: 18Kg

Read more less

Product name GAS WATER HEATER VAILLANT ATMOMAG 14-0/1 XI LPG. Open Room WITH NATURAL DRAFT Technical features ErP energy class: Class A Nominal heat output: 24.4 kW DHW direct withdrawal range T = 25C: 2.5 - 14 l/min Chamber Open to natural draught Ignition: electronic Compact dimensions (HxDxL): 680/270/350 mm Power supply: LPG General characteristics ATMOMAG Instantaneous water heaters with electronic battery ignition. AtmoMAG XI are natural draft water heaters with electronic ignition powered by batteries. Saving safety without the aid of electricity. The Direct Start system allows for faster ignitions. The ionization flame detection ensures operational safety. The adoption of the OPTI MOD system for flame regulation allows the water temperature to be adapted to the changing seasons with a quick gesture. In the mini version, characteristics and functionality remain unchanged and the small dimensions become the reason of choice in some living situations. atmoMAG XI (hot water production) the atmospheric version with DHW flow rate of: 14 litres/minute Methane LPG atmoMAG XI mini (hot water production) the atmospheric version with DHW flow rate of: 11 litres/minute Methane LPG Characteristics : Compact size Manual range selector Automatic flame modulation LCD display Domestic hot water Power selectable on 10 levels Ionization flame control New hydraulic unit Exchanger with Supral protection ErP and ELD: what it means and how they differ ErP: The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Eco design directive addresses two relevant product categories for installers and retailers in the sector: Category 1 includes space heaters; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD: In addition to the ErP directive, the EU has also introduced a mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and domestic hot water production be labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, it is possible to increase the energy classification of the system which will be calculated by the installer and indicated on the package label. Product Guarantee All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

GIATSU Heat Pump Water Heater 200 lt cod. GIA-ATS-O-200-VA-1 Product code: GIA-ATS-O-200-VA-1 Technical specifications Voltage 230V- 50Hz Rated power of electric heating 2000W Nominal power of the heat pump 610W Capacity 200 litres Noise <60 dBA Dimensions Ø 580 x 1860 mm VA1 GIATSU Aerothermal water heaters are the most efficient alternative to traditional gas water heaters and electric water heaters because they generate great energy savings by using air as an energy source. In the case of the 200 liter solar model, it also uses the solar energy source, which makes it a very environmentally friendly accumulator. With a wide operating range with external temperatures from -15ºC to 43ºC. Its great performance, its low consumption, its premium components, its multiple safety elements and a high quality compressor make this aerothermal accumulator a 100% reliable choice. Anti-legionella function. Replaces the heater and the thermos. Respectful with the environment. Compatible with solar energy (depending on model). 200 liters - Applicable for 3 to 4 people. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER BAXI mod. ACQUAPROJET 14I METHANE, Open Room WITH NATURAL DRAFT. Technical specifications Gas instantaneous water heaters Chamber Open to natural draught Nominal heat input kW 25.8 Nominal thermal power kW 22.7 Minimum thermal power kW 7.7 Minimum heat input kW 8.8 Operating water pressure 0.2-6 bar Water withdrawal range l/min 3-13 Maximum outlet water temperature C 65 Discharge pipe diam. 132mm Dimensions hxwxd mm 585x360x220 ; kg 10.5 METHANE version Features list ACQUAPROJET: the NEW instantaneous gas water heater Baxi offers a new instantaneous gas water heater, with Open Chamber and 2 Chamber models - Sealed Chamber water heaters of 11 and 13 l/min Open Chamber Models 11- 14 l/min Battery electronic ignition Electronic detection of flame presence Gas valve with modulation proportional to the water flow rate to keep the outlet temperature stable Minimum ignition flow 2.9 l/min Battery status LED indicators LPG conversion kit available as an option Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

.

Read more less

Sealed Chamber Gas Water Heater Savio SAVINO HE 14S Low NOx Methane Complete with Smoke Exhaust Kit Water heater Plus 14S Nominal heat input (Hi) kW 28.0 Maximum water flow rate (increase at 25 °C) kg/min 14.0 Appliance type C 13-33 Maximum water pressure (Pw) bar 10 Minimum water pressure (Pw) bar 0.2 Power supply 230V ~ 50Hz IPX4 electrical protection degree Ignition method Automatic impulse ignition controlled directly from the water opening Destination countries IT G 1/2 gas inlet fitting G 1/2 cold water inlet fitting G 1/2 hot water outlet fitting Diameter of the flue gas exhaust pipe mm Ø 60 x Ø 100 ErP DATA XL load profile Energy efficiency of the water heating system (ηWH) % 84.0 Energy efficiency of water heating system A Daily gas consumption (corrected) kWh 23.583 Daily electricity consumption (corrected) kWh 0.064 Annual electricity consumption AEC (kWh) 14 NOx mg/kWh 29 Internal sound power level (LWA) dB 61 NOx class 6 Product code 10104.1009.0/0 (LPG)/ 10114.1009.0/0 (MET) SAVINO Low NOx emission gas wall mounted water heater Available in 12 kW, 14 kW and 16 kW versions with very compact dimensions Energy saving This product features advanced technologies called Strengthened Combustion and Forced Combustion. These two patents make it possible to make the best use of thermal energy with high operating efficiency. Ease of use Thanks to the digital control panel with large display, the user can communicate easily and comfortably with the boiler. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature Set the temperature with one touch To set the required temperature, simply touch the digital display. The water temperature can be set between 35°C and 65°C, allowing different needs to be satisfied with maximum ease of use. Multiple security protection This product is equipped with various safety protections, including: • Protection of the self-monitoring system • Auto power off protection, • Overheating protection • Protection from accidental interruption of electricity • Fan failure protection • Protection from electrical overload • Protection against leakage current • Protection from excessive wind pressure • Protection from excessive temperatures • Timed protection “AI” Intelligent Artificial Memory Function When restarted, the gas water heater can operate with the last previously set temperature. No need to set the temperature again - a great practical application of the ergonomics idea. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS VARIOUS DENTS AND REPAIRS WITH PLASTIC PARTS GLUE (SEE PHOTO) Product code: 3629052 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Capacity l 80 Power kW 1.2 Average absorbed electrical power kW 0.19 Electric power absorbed max kW 1,42 Voltage V 220-240 i-Memory heating time (ΔT=43°C) h,min 5.25 Boost heating time (ΔT=43°C) h,min 2.34 Green heating time (ΔT=43°C) h,min 9.21 Maximum working pressure 8.0 bar Min/max air temperature °C 12/40 Sound power 49 dB Weight kg 37.5 IP protection X4 Lydos Hybrid 50% Energy Saving Every Day. Lydos Hybrid is the first water heater with hybrid technology in class A which allows you to save 50% of energy compared to one in class B, thanks to the combined use of energy from the heat pump and electricity. Hybrid Intelligence. The innovative i-Memory software learns your habits to efficiently manage hybrid technology, choosing the most convenient option between using energy from the heat pump and electricity. After an initial learning phase, the i-Memory is able to program the water temperature every hour, so as to meet the user's needs while saving time and energy. Superior Performance. Thanks to Hybrid Intelligence and i-Memory, hot water is always available when needed. The BOOST function speeds up the production of hot water and the Shower Ready icon notifies you when the first shower is ready. Simple installation . Designed to be as easy to install as any electric water heater No additional work is required thanks to compatibility with the supports and water connections of standard Ariston electric water heaters The hydraulic connections are completely hidden inside the product itself Italian style and intuitive design thanks to the advanced hi-tech interface.  Functions: i-MEMORY: Chooses the best compromise between comfort and efficiency based on user habits. The temperature and the amount of hot water are set on the basis of the energy consumption in the last four weeks. Managing the operation of the heating element and the heat pump is therefore an improvement process. Green Achieves maximum efficiency using 100% of the heat pump. The maximum temperature that can be reached is 53°C and cannot be increased. The electric resistance is activated only with Anti-legionella, or in the event of a malfunction of the heat pump. boost Temporarily increases the electric power of the product, in case of need for hot water within a short time. The resistance and the heat pump work together up to 53°C, after which the temperature is regulated only by the resistance. When the desired temperature is reached, the Boost function deactivates. Program Desired time and temperature program to optimize consumption thanks to hybrid technology. Allows the user to choose two different temperatures at two different times. Operation is in heat pump or, if necessary, in resistance. Lydos Hybrid At a Glance: First electric water heater with class A hybrid technology 50% savings compared to a class B water heater i-Memory, Program, Green and Boost function Active anode + magnesium Enamelled resistance in Incoloy nickel alloy for anti-noise and anti-corrosion Replacement of old water heaters Ease of installation Hidden hydraulic connections Condensate collection tray available as an accessory

Read more less

Technical features Model : Turbomag 17-2/0-5 Product code : 311425 Power supply: LPG Performance Nominal thermal power: 29.0 kW Reduced thermal power: 8.6 kW Nominal heat input: 32.9 kW Smoke temperature after draft break with Pn C 204 Smoke temperature after draft break with Pr C 137 Mass flow rate of fumes with Pn g/s 12.9 Mass flow rate of fumes with Pr g/s 8.9 CO 2 content in fumes with Pn : 6.9% Microaccumulator capacity: 3.2 litres Domestic hot water direct withdrawal range Δ T = 35 C l/min 2.2 - 12 Minimum pressure required for ignition: 0.2 bar Maximum temperature that can be set for domestic hot water: 63° C Minimum settable domestic hot water temperature C : 38° C Class of merit according to the European standard EN 13203: *** Maximum operating overpressure: 10.0 bar G20 methane gas consumption: 3.45 m 3 /h G30 liquid gas consumption: 2.59 kg/h Gas pressure upstream of the methane appliance: 20 mbar Gas pressure upstream of the LPG appliance (Butane/Propane): 30/37 mbar Power supply V/Hz 230/50 Total max absorbed electric power: 108 W Hot water fittings R 1/2" Inch Cold water fittings R 1/2" Inch Natural gas fittings R 1/2" Inch Liquid gas connection 12x1 mm Combustion gas/comburent air discharge connection 60/100 mm IP X4D degree of protection CE certification 1312BO3978 Dimensions and weight Dimensions (HxWxD): 742x410x370 mm Empty weight: 27.2 kg Vaillant TurboMAG water heater Quietness, Flexibility and Absolute Quality Vaillant turboMAG gas water heaters are the result of careful studies and careful planning. Each water heater is constantly monitored right from the assembly stage to ensure maximum reliability, great performance and always guarantee maximum comfort and significant energy savings. TurboMAG 17 with micro accumulator Water heater with micro storage and electronic ignition without pilot flame. Equipped with the Comfortronic system, turboMAG guarantees a constant temperature water supply for both large and small tappings. Just two knobs and a digital display make setting the temperature and viewing the operating parameters really easy. The most efficient sanitary comfort choice without installation limits Comfort ● High hot water production (up to 17 l/min) ● Hot water without sudden changes in temperature ● Hot water without waiting times thanks to micro storage savings ● High modulation ● Great reduction of gas consumption thanks to the flame self-modulation system ● Small size Safety ● Reliability of every single component tested by the Vaillant LabTest Simplicity ● New Touch Screen interface ● Quick replacement of previous models ● Wall drain Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION: OFFER VALID UNTIL STOCKS LAST! Overview ARISTON FAST EVO B 11 EU METHANE GAS WATER HEATER with battery Cod. 3632215 - new ErP model Open Chamber NATURAL DRAFT Technical specifications Product code: 3632215 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: profileM Characteristics of heating/DHW operation: CE certification (pin) 0063CN7240 Category II 2H3+ Type B11BS Electronic ignition Power supply: 2x1.5V LR20 batteries Chamber Open to natural draught Nominal heat output: 19 kW Minimum thermal power: 8 kW Nominal heat input: 21.5 kW Combustion efficiency (fumes): >89% Min/max temperature selectable: 35-65C Flow rate (T 25C): 11 l/min Minimum operating flow: >2 l/min Dimensions (HxLxP): mm 580 x 310 x 210; 9.6kg Power supply: METHANE Main features Fast EvC/B EU Fast Evo: The new range of instantaneous gas-fired water heaters in the Open Chamber version with high efficiency and reliability standards (11,14 and 16 l/min) Simple, reliable and intuitive Fast EVO Ariston brings the evolution of the Open Chamber gas water heater to every home. High standards of efficiency and great reliability for 2 models with different types of ignition: rechargeable battery and knob for Fast EVO B and power supply cable and LCD display for Fast EVO C. Both versions ensure high performance and considerable savings in terms of consumption. the Fast EVO water heater offers numerous advantages, starting from the continuous flame modulation thanks to the NTC probe located at the exchanger outlet, which guarantees maximum temperature stability. In case of fluctuations in the water flow rate (2 l/min minimum variation threshold), the new Fast EVO, thanks to the NTC probe and the electronic card, manages to keep the temperature stable with better performance compared to the models considered top of the market. Fast EVO also equipped with water flow switch, humid chamber copper exchanger and electronic flame detection; the minimum operating pressure of 0.1 bar allows the product to operate in the most extreme conditions, while the minimum ignition flow rate is 2 l/min. Overtemperature protection makes it safer to use. Advantages: The innovative water heater available in the version with electric power cable and LCD display (FAST EVO C) or with rechargeable battery (FAST EVO B) Intuitive control panel with LCD display (model C) Continuous flame modulation thanks to the NTC probe located at the exchanger outlet (maximum temperature stability Minimum operating pressure 0.1 bar Minimum ignition flow rate 2 l/min Presence of the water flow switch "Humid chamber" copper heat exchanger Electronic detection of flame presence External temperature regulation: Allows the user to choose the temperature that best suits his needs Electronic control: Electronic control panel for easier and more immediate use. High efficiency: Product characterized by high energy performance, reduction of consumption and polluting emissions. Can be integrated with Solar : Suitable solar integration through a thermostatic valve which allows the water heater not to start in the event that the temperature of the water preheated by the solar system is higher than the desired temperature, guaranteeing high energy savings Ecodesign Directive In fact, after very long negotiations, the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing boilers on the market starting from 26 September 2015. This means that starting from this date, anyone wishing to install a boiler in their own home will have to install only condensation. Only a particular type of non-condensing boiler will continue to be produced which is technically called "Open Chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings. What is energy labelling Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies on end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. From 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks ),. How to read energy labels There are different labels, based on the type and function of the product (both space and water heating, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in a system. In this case it is necessary to prepare a system label in addition to that relating to the individual product. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 20 EU LPG - new ErP model Technical features Product code: 3632259 Energy label specifications according to the European ErP directive Energy efficiency: Class B Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 36.1 Minimum thermal power kW 7.2 Modulation range 1 : 5.0 Nominal heat input kW 40 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow rate l/min > 3.8 Flow rate (ΔT 25°C) l/min 20 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 63 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 582 x 375 x 160 mm Weight: 17.5kg Power supply: LPG or methane Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR OUTDOOR LNX MODEL WILL BE SHIPPED AT THE END OF STOCKS CHAFFOTEAUX FLUENDO AVENIR OUTDOOR WATER HEATER 24 LT EU METHANE - NEW ErP Technical features Product code: 3632266 Energy label specifications according to the European ErP directive Sanitary Energy Efficiency Class B Withdrawal profile: XXL Description: Model: 24 LT EU Professional Range Ignition: electronic flame ionization Type: Forced flow open chamber for outdoor use Dimensions (hwxd): 582 x 375 x 160mm ; 17.5Kg Operating characteristics: Nominal heat input : 47 kW Nominal heat output: 42.3 kW Methane/LPG supply pressure: 20/37 mbar Consumption - Methane/LPG max flow rate/h: 4.92/3.62 m3/h Selectable min/max temperature: 35-70°C Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 3.8 l/min Flow rate with temperature difference (∆t 25°C): 24 l/min Electrical circuit: Maximum absorbed power: 63 kW Electrical protection type: IPX5D Diet: Gas: LPG or CNG Chaffoteaux confirms its specialized expertise in the design and manufacture of high quality products and systems for environmental comfort and sanitary water, expanding the range of instantaneous gas water heaters with the professional models of Fluendo Avenir Outdoor. Fluendo Avenir Outdoor is now also available in the new 20 and 24 l/min versions which allow cascade installation of up to a maximum of five products with a special control unit. The introduction of these two new professional models, which join the 11 and 16 l/min configurations for domestic use, makes this range extremely flexible with a thermal power that can vary from 4 kW to 211.5 kW.i. External installation. Ideal for installations with smoke evacuation problems. Minimum activation pressure 0.1 bar. Overtemperature control. Standard antifreeze kit: up to -20°C. Possibility of cascade installation (up to max 5 products) with PROFESSIONAL models. Characteristics: Ease of use - The user can adjust the domestic hot water to the desired temperature between 35° and 70°C using a wired remote control for remote temperature viewing and modification. Presence in the packaging of the 30-meter cable for the remote control. Easy installation - With the new Fluendo Avenir Outdoor installation times and related costs are reduced. All this thanks to its compact size, low weight and outdoor installation. The gas water heater <35 kW for single-family use is released from the limitations of Legislative Decree 192/05. Easy maintenance - Maintenance of the water heater is facilitated by the ability to view error codes on the remote control's LCD display. The components are replaceable from the front. Dedicated filters that clean easily. High efficiency - performance above 90% efficiency thanks to pre mix technology (modulation ratio up to 1:6). Speed ​​modulation - optimization of maximum efficiency also thanks to the modulating fan. Automatic flow regulator with stepper motor - In order to obtain maximum hot water delivery stability, the automatic flow regulator reduces the water flow until the desired temperature is obtained Sanitary comfort Modulating: allows great energy savings and offers greater comfort with a stable temperature in the presence of simultaneous requests for hot water. Thermostatic: high precision NTC probes to measure the cold water inlet temperature and hot water outlet temperature. Solar kit: the thermostatic valve allows you to connect the water heater to solar systems. An ecological solution to save energy. Cascade: possibility of managing up to 5 products with a special control unit (PROFESSIONAL RANGE). Flexibility: up to 211.5 kW of thermal power. Comfort of use and installation Minimum depth of only 13 cm (models for domestic use). Compatible with solar systems for greater gas savings. Maximum security thanks to installation outside the home. Quick and easy installation thanks to the fact that it does not require a smoke outlet. Standard antifreeze kit and maximum electrical protection IPX5D. Standard wired remote control to view and change the temperature. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

JUNKERS HYDROCOMPACT OUTDOOR 18 LT mod. WTD 18 AM EO CNG IN THE ABSENCE OF THE PRODUCT, THE NEW METHANE THERM 5600 SO 18 MODEL WILL BE SUPPLIED Technical features DHW energy efficiency class (ErP) Catalog code: WTD 18 AM E Declared load profile: XL Instant gas water heater Forced draft sealed chamber Flame ionisation electronic ignition Nominal heat output: 31.6 kW Nominal heat input: 34 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Flow rate of water supplied with DT 25 °C: 18 l/min Minimum operating flow: 2.2 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25 °C (accessory) Remote control: accessory Display: LCD multifunction Degree of protection: IPX4D Dimensions (LxWxH): mm 175x364x568 Version: CNG General characteristics Hydrocompact Indoor: Compact gas instantaneous water heaters for indoor use Do you have little space available but don't want to give up the usual quality and comfort? HYDROCOMPACTINDOOR was born, the new compact water heater in the Junkers range: all the usual comfort in very little space! The most compact ever HYDROCOMPACT INDOOR is the smallest indoor water heater available on the market. All Junkers quality and high technology are enclosed in just 17 cm depth (12 and 15 l/min models)! Easily placed inside a wall unit of your kitchen (in compliance with current regulations), the new HYDROCOMPACT INDOOR represents the best solution for those with space problems: thanks to its extremely compact dimensions, in fact, it is able to satisfy any need of space and installation. The simplicity of great technology Thanks to the new Junkers patented Optiflow technology, HYDROCOMPACTINDOOR is able to automatically recognize the lengths of the flue gas intake and exhaust system. This intelligent system helps to increase the efficiency of the product, improving its performance and reducing consumption. The large display integrated in the appliance also makes it possible to manage and program its operation with extreme simplicity and to set the water temperature just as easily, according to the different comfort needs. Furthermore, for the more <span">demanding customers, it is possible to view all the information present on the integrated display also on the remote control (accessory). Thanks to the new patented OptiFlow technology, HYDROCOMPACTINDOOR is able to automatically calculate the combustion air flow, based on the power absorbed by the fan and the rotation speed of the fan itself. This guarantees: optimum efficiency of the appliance in all operating conditions the reduction of the minimum power without the risk of condensation forming on the heat exchanger very low levels of CO2 emissions Furthermore, the automatic adaptation of the fan speed to the installation conditions (length of the <span">intake/exhaust ducts and any obstructions) ensures simpler and faster installation. Small consumption, great performance With HYDROCOMPACTINDOOR, optimization of consumption is guaranteed! Thanks to the high efficiency and the wide modulation range (1:7) the water heater is able to adapt the gas consumption necessary to heat the water to the actual DHW withdrawal request, thus guaranteeing all the desired DHW comfort and the maximum savings. Furthermore, HYDROCOMPACTINDOOR can be directly connected to solar thermal systems for the production of domestic hot water: all the energy of the sun for maximum comfort and minimum consumption! Characteristics: Extremely compact dimensions: it is the smallest instantaneous gas water heater available on the market for indoor use <span">Automatic recognition of the lengths of the flue gas intake/exhaust system thanks to the patented OptiFlow technology Efficiency up to 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Easy and intuitive management, thanks to the large LCD display for adjusting the temperature and viewing information relating to the operation of the appliance Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min devices High sanitary comfort and reduction of gas consumption thanks to the electronic temperature control (stability ± 1°C) Reduction of consumption thanks to the wide modulation range (1:7) <span">Ability to remotely manage the water heater thanks to the accessory control <span">Elegant design Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less