Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 10 -18 Characteristics of heating/DHW operation: Code: REU-VRM2024WD-NG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 3.46/39 Water flow Δt 25°C Min/Max (l/min) 20l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 48 / 2 / 74 IPX5D protection Class NOx5 METHANE version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control External installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 10 -18 Characteristics of heating/DHW operation: Part number: REU-VRM2024WD-LPG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 3.46/39 Water flow Δt 25°C Min/Max (l/min) 20l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 48 / 2 / 74 IPX5D protection Class NOx5 LPG version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control Outdoor installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XXL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 14 -17 Characteristics of heating/DHW operation: Code: REU-KM2635WD-NG Condensing - Forced Flow - Type A3 Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 1000 Can be combined in cascade, max 25 luminaires Standard antifreeze down to -20°C Installation: Outdoor - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 654x470x257 - 29 Kg Natural gas heat input Min/Max (kW) 2.5/43 Water flow Δt 25°C Min/Max (l/min) 26 l/min Max operating temperature (°C) 85 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 2/10 Electricity consumption normal / stand-by / antifreeze (W) 44 / 2.4 / 170 IPX5D protection Class NOx5 METHANE version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). RESULT: no need to mix for maximum COMFORT and absolute PROTECTION from the risk of burns. Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Condensing range: Superior performance in small denominations Condensation technology is today among the most modern and ecological in existence. The heat developed by the exhaust fumes that traditional appliances disperse into the environment is exploited by this technology to pre-heat the incoming water. The water, passing through the fumes, recovers part of the heat to reach the burner already preheated, thus significantly reducing its intervention. The advantage is double and clear: ECONOMICAL: reduction of fuel consumption (up to one kW less for each m3 of gas) ENVIRONMENTAL: NOx and CO emission up to 70% less General characteristics INFINITY K26e Infinity 26 External condensing is an instantaneous domestic hot water producer for external installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard electronic control with temperature management and self-diagnosis function. Max operating temperature equal to 85° C DHW circuit connection: Cold water: R 3/4" male shut-off valve; Hot water: R 3/4" male shut-off valve; Gas connection and electricity supply: Gas: R 3/4" male shut-off valve; Power supply: AC 220V 50Hz. Exhaust duct: Without exhaust system The condensing models can be installed in cascade with the preassembled Rinnai Modus modules equipped with water and gas side predispositions, inail kit inserted. ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RINNAI INFINITY 16I GAS WATER HEATER INSIDE METHANE COMPLETE WITH FUME KIT Instantaneous gas water heater with electronic ignition and ionization flame sensor Colour: Euro White Installation: internal Forced draft sealed chamber Dimensions (hxwxd): 67.5x37x13 cm; 15 Kgs Thermal inputs (min/max): 4.7 / 34 kW Hydraulic flow rate (min/max): 2.4 / 16 l/min Standard antifreeze: down to -15°C methane version INFINITY Infinity is the line of Rinnai gas water heaters which represent the new frontier in the production of hot water, both for their SIMPLICITY of INSTALLATION and for the COMFORT (each Infinity device is equipped as standard with a remote control on which to set the desired water temperature guaranteeing all the pleasure of unlimited hot water at a constant temperature) and SAVING (Each appliance is equipped with "continuously modulating" gas valves which regulate combustion in an extremely efficient way, reducing waste) which are able to guarantee. Available in various flow capacities, from 11 to 32 l/min, they are able to meet any hot water need, even the most demanding. Infinity appliances run on gas and are available in natural gas, LPG and propane air versions (for the Sardinia region). Infinity water heaters have electronic ignition (without pilot flame) and forced flow (both in the indoor and outdoor versions) and are activated only when there is a real request for hot water (when the tap is opened) without the need for expensive storage tanks. DOMESTIC RANGE: Superior performance in small denominations The domestic Infinity range , intended for residential use or small commercial businesses, is divided into appliances for outdoor installation (11, 13, 16, 20 liters per minute) and indoor (11.16 liters per minute). Through the standard remote control on all devices (on the dashboard, which can be remotely controlled, for Infinity 11 and 16 inside cs), not only is the pleasure of having hot water exactly at the desired temperature guaranteed, without the need for mixing or waiting times, but you will also have the total security of never getting burned (especially useful for weak users such as children, the elderly and the infirm) The compact dimensions and modern aesthetics make both indoor and outdoor installation absolutely pleasant. INFINITY 16 I The infinity 16 Internal sealed chamber is an instantaneous domestic hot water producer for internal installation with electronic temperature management and water flow control. Anti-corrosion enamelled stainless steel casing and remote electronic control, positioned on the front panel, with temperature management and self-diagnosis function. Max operating temperature equal to 75° C DHW circuit connection: Cold water: R 1/2" male shut-off valve; Hot water: R 1/2" male shut-off valve; Gas connection and electricity supply: Gas: R 1/2" male shut-off valve; Power supply: AC 220V 50Hz. NB: FOR INDOOR INSTALLATION IT MUST BE INSTALLED IN A VENTILATED PLACE Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Rinnai Infinity Sensei N26E REU-N2635WC-E-LPG LPG outdoor condensing water heater - NEW External installation Dimensions (H x W x D) (mm) 670x470x276 Energy Class A XL profile Max Hydraulic Flow Δt 25°C (l/min) 26 l/min Thermoregulation Digital Thermostat Can be cascaded Yes sensei Rinnai presents Infinity Sensei, the masters of condensation, the brand new range of instant gas condensing water heaters of 26 and 32 litres/minute, for indoors or outdoors. Ultra performing on their own, perfect in cascade installations, where they express all their potential by satisfying even the most important hot water production needs in commercial premises, accommodation facilities, production plants and much more. Condensation is ECO-SUSTAINABLE TECHNOLOGY In condensing technology, the water vapor contained in the combustion products is also used to generate heat. For this reason, the Infinity Sensei series condensing water heaters reduce consumption by up to 30% and polluting emissions (NOx and CO₂) by up to 70%. DID YOU KNOW THAT? In professional applications, only the condensing sanitary production is compliant with the law. The Ministerial Decree "Minimum requirements" of 6/26/2015 regulates both heating and the production of domestic hot water, also called, like heating, to respect a minimum efficiency on the PCI equal to 90 + 2 log Pn . This value can only be reached with condensation . From the entry into force of the decree, in order to have parameters of polluting emissions and energy efficiency compliant with the legislation, all economic entities that use hot water professionally must use gas-fired producers only of the condensing type in all cases ( replacement, renovation and new construction). The Infinity Sensei condensing water heaters they are perfectly compatible with renewable sources they can manage up to 4 additional remote commands for temperature control from different points of use have an increasingly user-friendly electronic board, which allows you to set and monitor the operating parameters directly from the standard remote control. The Technician can activate the Service Soon parameter, a warning signal for scheduled maintenance, functional to guarantee the periodicity of the assistance interventions, which preserve the longevity of the systems. Optimal combustion, even in the mountains The Infinity SENSEI condensing appliances, like all the new Rinnai water heaters, are equipped with the high altitude function that the technician can set in addition to the 900m altitude where the air is rarefied. Installation in cascade and in Modus Infinity Sensei for indoor or outdoor use can be connected to each other in certified turnkey systems that allow all the security of perfect sizing with respect to system requirements. Several devices can be managed in an optimal way, as if they were a single fully modulating machine. The Modus can connect up to 10 producers in series and can be further combined with each other. Sensei: even better. Cascade management becomes smarter, with a single connector that connects up to 24 luminaires and a new IP addressing system for Master-Slave management, functional for a uniform distribution of the workload among all the luminaires that make up the module . Sensei from outside Infinity Sensei series N26e l/min condensing is an instantaneous domestic hot water producer for outdoor installation . Rinnai patented R-Evolution heat exchanger, new metal fiber burner, zero governor valve, full condensation. Anti-corrosion and anti-freeze enamelled galvanized steel casing included as standard up to -20°C. Like all condensing models, N26e is compatible with Rinnai Modus systems for easy installation of multiple appliances in medium and large professional systems. For domestic use, with the first ignition free of charge by an authorized technician, Rinnai offers a free 4-year warranty extension. Energy efficiency class A. Unlimited hot water without sudden changes in temperature Flow regulator: constant temperature as the flow varies Temperature control to the degree For domestic use, free initial testing with free warranty extension, by an authorized Rinnai Technician Electronic ignition without pilot flame Outdoor installation: no fumes exhaust required Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION: The product is completely intact, but does not have the original packaging as it is damaged. Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 8 - 18 Indoor noise levels (dB) 67 Characteristics of heating/DHW operation: Code: REU-VCM2837FFUD-LPG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 ; 20 Kgs Methane heat input Min/Max (kW) 2.8/53 Water flow t 25C Max (l/min) 28 Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2.5/10 Electric consumption normal / stand-by / antigel (W) 97 / 2 / 120 LPG version INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Like all Rinnai water heaters, the new Infinity control the temperature to the degree and optimize comfort in the name of energy savings Temperature refinement to degree at point of use When the water heater is far from the utilities and the pipes generate heat dispersion, it is possible to correct the temperature at the tap from +1°C to +3°C Are you a home user? Register your new water heater on rinnai.it in the appropriate section to extend the warranty of your water heater to 4 years free of charge* The warranty extension (valid only on spare parts) can be requested on domestic water heaters. Consult the technical manuals to find out the details of the initiative. AT OUR HOME WE ARE FREE TO BE OURSELVES Rinnai responds to the different needs of hot water. A product available in different sizes 14 or 17 litres/minute. A studio flat, an apartment, one or more people living together. Always, an appliance that takes up very little space and offers endless hot water, giving way to what matters most Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XXL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 20 - 22 Characteristics of heating/DHW operation: Code: REU-KBM3237WD-NG Condensing - Forced Flow - Type A3 Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 1000 Can be combined in cascade, max 25 luminaires Standard antifreeze down to -20°C Installation: Outdoor - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 654x470x257 - 28 Kg Natural gas heat input Min/Max (kW) 2.5/53 Water flow Δt 25°C Min/Max (l/min) 32 l/min Max operating temperature (°C) 85 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 2/10 Electricity consumption normal / stand-by / antifreeze (W) 63 / 2 / 168 IPX5D protection Class NOx5 METHANE version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). RESULT: no need to mix for maximum COMFORT and absolute PROTECTION from the risk of burns. Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Condensing range: Superior performance in small denominations Condensation technology is today among the most modern and ecological in existence. The heat developed by the exhaust fumes that traditional appliances disperse into the environment is exploited by this technology to pre-heat the incoming water. The water, passing through the fumes, recovers part of the heat to reach the burner already preheated, thus significantly reducing its intervention. The advantage is double and clear: ECONOMICAL: reduction of fuel consumption (up to one kW less for each m3 of gas) ENVIRONMENTAL: NOx and CO emission up to 70% less General characteristics INFINITY KB32e Infinity KB32e is the new 32lt outdoor gas condensing water heater with reverse flame ceramic burner, for complete condensation with VERY LOW POLLUTING EMISSIONS . With continuous modulation, it is equipped with standard antifreeze down to -20°C, standard remote control, three optional remote controls all with “child lock” safety function. The KB32e can manage an external circulator in domestic systems with a DHW recirculation ring, according to two operating modes: " Economy" and "Comfort " to offer maximum savings and health well-being. The KB32e is compatible with Rinnai Modus systems for easy installation and has a connector (Rinnai S-BMS) for remote control of the system. Available in methane, LPG. Characteristics: Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies For home use, free initial testing by an authorized Rinnai service center Management of an external pump dedicated to recirculation Inverted flame ceramic burner ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER RINNAI CONTINUUM 11i INTERNAL METHANE. 2 - FORCED DRAFT Sealed Chamber Water Heaters, COMPLETE WITH FUME EXHAUST KIT - ErP Energy class A Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared loader profile: M Characteristics of heating/DHW operation: Code: REU-1110FFU-NG Gas instantaneous water heater 2 - Forced flow sealed chamber water heaters Ignition: Electronic flame ionization, direct Installation: Indoor / outdoor protected Dimensions: mm 675 hx 370 wx 138 d; 16 Kgs Selectable temperatures on the control panel: C 35,37-48,50,55,60 Thermal inputs (min/max): 6.1 / 21.6 kW Hydraulic flow rate (min/max): 2.4 / 11 l/min Nominal water pressure (Pw): bar 0.7 - 10.0 (recommended 2.0 min) Electric consumption: Watts 50 normal / 8 stand-by Noise level: db(A) 46 Protection factor: IPx4 METHANE version Main features RINNAI GAS WATER HEATER: CONTINUUM Continuum the basic line of Rinnai. The code REU-1110FFU Continuum is the indoor water heater for domestic use which combines the smallest dimensions with high-performance technology for the instantaneous production of domestic hot water. Pleasant in design and designed to guarantee absolute safety, thanks to the 2 - Sealed Chamber Water Heaters, Continuum, ideal for the production of DHW in private homes. Equipped with display (not removable) for temperature management and self-diagnosis. Anti-corrosion enamelled stainless steel casing. Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree Free testing, carried out by an authorized Rinnai technical assistance centre Shape memory alloy: the membrane inside the water group changes shape according to the temperature, determining the water flow in transit and the outlet temperature Characteristics: DESIGN Continuum comes with an essential and elegant design. It is super-slim, and thanks to its only 14cm thickness it can be installed even in the tightest spaces. The elongated front panel, ideal for hiding the hydraulic fittings and allowing for visible installation, is combined with a backlit digital control panel, which guarantees functionality and ease of use SAVING Thanks to the electronic ignition, which eliminates the pilot flame, and to the possibility of setting the desired temperature electronically, it is possible to obtain up to 25% savings on gas consumption. Fan and internal gas valve are in continuous modulation: determining how much fuel (air) and how much fuel (gas) must be used to obtain optimal combustion, which is the necessary condition to avoid waste and reduce polluting emissions. SAFETY Rinnai always pays great attention to safety: Continuum an appliance 2 - Sealed chamber water heaters. This means that it has no interchange with the environment in which it is installed. It draws air from the outside and expels the burnt fumes through a fan always in an outside environment (and thus avoids the risk of carbon monoxide poisoning). The electronic temperature control ensures that the appliance switches off if the outlet water temperature exceeds the one selected on the control panel by even just 3 degrees: this protects weak users from the risk of burns. The pre and post ventilation procedure, which cleans the combustion chamber and cools it at each ignition and shutdown cycle, preserves the life of the appliance and optimizes the combustion values. DESIGN AND FUNCTIONALITY Rinnai Continuum is distinguished by a clean and minimal line. The command on the machine, simple and intuitive, allows you to consult the water heater stat displayed on the practical digital display. The temperature is regulated by means of increase and decrease buttons, thus overcoming the approximation of the knobs, typical of a now obsolete technology. It is possible to select up to 16 different temperatures, starting from 35C, up to 60C. COMPACT AND SILENT Rinnai Continuum can be installed not only in the boiler room, but also in the living spaces of the house, such as bathrooms and kitchens, thanks to its compact size and low noise level (lower than the sound level of a normal conversation). ROBUST AND RELIABLE Rinnai Continuum is built with excellent quality materials and components, which make it a reliable and durable product. The external panels in enamelled-corrosion steel, the copper exchanger (for better heat conduction and greater hygiene), the probes are immersion (to know the temperature of the water supplied with precision to the degree). SHAPE MEMORY ALLOY the technology literally changes shape, the membrane inside the water unit changes shape according to the temperature, determining the flow of water in transit by controlling the outlet temperature. In this way it is possible to guarantee superior sanitary comfort and stability in the supply of hot water. TECHNIQUE AND RELIABILITY Rinnai Continuum equipped with fan and modulating gas valve to guarantee the correct air/gas inside the combustion chamber and therefore greater efficiency and lower polluting emissions. Rinnai Continuum is extremely versatile and, starting from 0.7 bar, it can also be installed where there are low hydraulic pressures. Thanks to the fan's electronic control, the appliance is able to detect the presence of obstructions and impediments to the correct expulsion of the combustion products and signal it, guaranteeing the safety of the rooms in which it is installed. INSTALLATION Rinnai Continuum is available both for use with natural gas and LPG (liquid gas) and can be installed both indoors and outdoors, albeit partially protected in temperate climates.* Continuum can be easily installed thanks to the special brackets with central fork. A single screw in the wall allows you to hang the fixture easily and proceed at a later time to set up the final fixing brackets, without having to simultaneously support the weight of the fixture itself. The coaxial flue is 60/100 cm and can reach a maximum length of 2.2 linear metres. ErP Ready Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER RINNAI INFINITY 32I INTERNAL METHANE Cod. REU-VRM3237FFU-NG, 2 - Sealed chamber water heaters WITH FORCED DRAFT, COMPLETE WITH FUME EXHAUST KIT - ErP Energy class A. Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 10 - 18 Noise levels indoors (dB) 63 Characteristics of heating/DHW operation: Code: REU-VRM3237FFU-NG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: 600x470x220 (150 mm flue center distance); 25kg Methane heat input Min/Max (kW) 5/62 Water flow rate t 25C Min/Max (l/min) 2,4/32 (37 l/min with T=20C) Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2/10 Electric consumption normal / stand-by / antigel (W) 99 / 2 / 100 METHANE version Main features RINNAI GAS WATER HEATER: INFINITY saves infinite comforts Rinnai Infinity is the line of instantaneous GAS* water heaters, with forced flow or otherwise, for professional domestic use, indoors and outdoors, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Gradual temperature selection via the standard remote control energy saving Simplicity of design and installation Compact size Superior performance and absolute security Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled steel-zinc cape Frost, thanks to the standard antifreeze on all appliances (including indoors) The SERIES remote control allows the user to select the desired water temperature with precision to the degree, directly from the point of use (when the tap is opened). RESULT: no need to mix for maximum COMFORT and absolute PROTECTION from the risk of burns. energy savings: Rinnai Infinity eliminates any useless waste and ensures real savings: The gas operation guarantees considerably lower costs than the electric one. Respecting a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent reduction in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers, other heat generators, modulating, solquandserve and solquantserve, to reach the set temperature Professional Range: Hot water in large quantities is no longer a problem The professional range includes two different flow rates, 26 and 32 l/min, available both in the version for internal and external installation. The extreme versatility of Infinity makes it adaptable to any type of installation; with a few simple evaluations it will be possible to choose whether to mount the single elements, of different capacities, to create cascade systems (up to 5 devices controlled by an electronic card) capable of delivering up to 160 l/min, without the need to have even a 5 - Storage water heaters. Thanks to the detection of the water inlet temperature, Infinity can also be effectively installed in systems with recirculation in combination with solar panels, guaranteeing maximum integration without waste. Infinity is also able to meet those users who need a very high thermal power: in this case, the equipment could be used as a thermal generator on an accumulator, exploiting the large thermal power associated with its small size. INFINITY 32e Infinity 32 external is an instantaneous domestic hot water producer for external installation with electronic temperature management and water flow control. Anti-corrosion enamelled stainless steel casing and electronic controls as standard with temperature management and self-diagnosis function. Max operating temperature equal to 85 C Antifreeze Standard antifreeze system (also on indoor appliances) up to -20C. Status monitor Control panel The Infinity 32s feature a front panel statpost monitor, which displays operating temperature and fault codes. Up to 4 remote controls can be connected to the appliance (of which add to the dashboard for the internal model) offering the following options: temperature control directly from the room of use self-diagnosis additional functions with "de luxe" controls for kitchen bathrooms Cascade connections In addition to the previous management and control systems for cascade appliances, the new Infinity 32 is equipped with a connector for connection to a Building Management System (REU-OPU) which allows error signals to be remoted. ERP extension Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: M Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 6 - 6 Characteristics of heating/DHW operation: Code: REU-VRM1120WD-NG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 2.75/22 Water flow Δt 25°C Min/Max (l/min) 11l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 29 / 2 / 74 IPX5D protection Class NOx5 METHANE version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control Outdoor installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER RINNAI INFINITY 16I INTERNAL LPG COMPLETE WITH FUME KIT Code: REU-16FUA Instantaneous gas water heater with electronic ignition and ionization flame sensor Colour: Euro White Installation: internal Forced draft sealed chamber Dimensions (hxwxd): 67.5x37x13 cm; 15 Kgs Thermal inputs (min/max): 4.7 / 34 kW Hydraulic flow rate (min/max): 2.4 / 16 l/min Standard antifreeze: down to -15°C LPG version INFINITY Infinity is the line of Rinnai gas water heaters which represent the new frontier in the production of hot water, both for their SIMPLICITY of INSTALLATION and for the COMFORT (each Infinity device is equipped as standard with a remote control on which to set the desired water temperature guaranteeing all the pleasure of unlimited hot water at a constant temperature) and SAVING (Each appliance is equipped with "continuously modulating" gas valves which regulate combustion in an extremely efficient way, reducing waste) which are able to guarantee. Available in various flow capacities, from 11 to 32 l/min, they are able to meet any hot water need, even the most demanding. Infinity appliances run on gas and are available in natural gas, LPG and propane air versions (for the Sardinia region). Infinity water heaters have electronic ignition (without pilot flame) and forced flow (both in the indoor and outdoor versions) and are activated only when there is a real request for hot water (when the tap is opened) without the need for expensive storage tanks. DOMESTIC RANGE: Superior performance in small denominations The domestic Infinity range , intended for residential use or small commercial businesses, is divided into appliances for outdoor installation (11, 13, 16, 20 liters per minute) and indoor (11.16 liters per minute). Through the standard remote control on all devices (on the dashboard, which can be remotely controlled, for Infinity 11 and 16 inside cs), not only is the pleasure of having hot water exactly at the desired temperature guaranteed, without the need for mixing or waiting times, but you will also have the total security of never getting burned (especially useful for weak users such as children, the elderly and the infirm) The compact dimensions and modern aesthetics make both indoor and outdoor installation absolutely pleasant. INFINITY 16 I The infinity 16 Internal sealed chamber is an instantaneous domestic hot water producer for internal installation with electronic temperature management and water flow control. Anti-corrosion enamelled stainless steel casing and remote electronic control, positioned on the front panel, with temperature management and self-diagnosis function. Max operating temperature equal to 75° C DHW circuit connection: Cold water: R 1/2" male shut-off valve; Hot water: R 1/2" male shut-off valve; Gas connection and electricity supply: Gas: R 1/2" male shut-off valve; Power supply: AC 220V 50Hz. NB: FOR INDOOR INSTALLATION IT MUST BE INSTALLED IN A VENTILATED PLACE Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: M Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 6 - 6 Characteristics of heating/DHW operation: Code: REU-VRM1120WD-LPG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 2.75/22 Water flow Δt 25°C Min/Max (l/min) 11l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 29 / 2 / 74 IPX5D protection Class NOx5 LPG version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control External installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less