Gas water heater RINNAI INFINITY 17i complete with smoke kit cod. REU-A1720FFU - NEW Code REU-A1720FFU Internal installation Device type C Energy class A Load profile L Available versions Natural gas, LPG, propane air Thermal capacity (kW) min 4.1 / Max 32.40 Hydraulic flow rate (l/min) min 2 l/min MAX 17 l/min (20 l/min ∆T=15°C) Max temperature that can be set (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Standard antifreeze, down to -15°C Dimensions WxDxH 373x173x541 mm INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 8 -18 Characteristics of heating/DHW operation: Code: REU-VCM2837WD-NG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 1000 Can be combined in cascade, max 25 luminaires Standard antifreeze down to -20°C Installation: Outdoor - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 - 20 Kg Natural gas heat input Min/Max (kW) 2.8/52 Water flow Δt 25°C Min/Max (l/min) 28 l/min Max operating temperature (°C) 85 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 2.5/10 Electricity consumption normal / stand-by / antifreeze (W) 65 / 2 / 104 IPX5D protection Class NOx5 METHANE version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control Outdoor installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Code : REU-A1720FFU Type of Installation : Internal Device typology : C Energy class: A Load profile : L Performance Thermal Capacity (kW) min 4.1 / Max 27.2 Hydraulic flow rate (l/min) min 2 l/min MAX 14 l/min (20 l/min ∆T=15°C) Max temperature that can be set (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Fittings and flue Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Water Inlet: ½” Water Outlet: ½” Gas ½” Standard antifreeze, down to -15°C CNG power supply Dimensions Dimensions ( LxWxH ) : 373 x 173 x 541 mm Weight : 14.5Kg INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Like all Rinnai water heaters, the new Infinity control the temperature to the degree and optimize comfort in the name of energy savings Temperature refinement to degree at point of use When the water heater is far from the utilities and the pipes generate heat dispersion, it is possible to correct the temperature at the tap from +1°C to +3°C Are you a home user? Register your new water heater on rinnai.it in the appropriate section to extend the warranty of your water heater to 4 years free of charge* The warranty extension (valid only on spare parts) can be requested on domestic water heaters. Consult the technical manuals to find out the details of the initiative. AT OUR HOME WE ARE FREE TO BE OURSELVES Rinnai responds to the different needs of hot water. A product available in different sizes 14 or 17 litres/minute. A studio flat, an apartment, one or more people living together. Always, an appliance that takes up very little space and offers endless hot water, giving way to what matters most Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Water heater Outdoor gas water heater RINNAI ONE 11e REU-A1111W-E - NEW External installation Dimensions (H x W x D) (mm) 600x3373x173 Energy class A+ S profile Max hydraulic flow rate Δt 25°C (l/min) 11 l/min Thermoregulation Digital Thermostat Can be cascaded No RINNAI ONE The 11 litres/min ONE water heater is the domestic instantaneous water heater to be installed outside the home. It produces hot water only when needed (only when a tap is opened), does not waste energy (because it does not have to maintain any stock of hot water), avoids the risk of Legionella bacteria forming, thanks to the absence of stagnation. One is the water heater for domestic use that combines the smallest dimensions with the most performing technology for the instantaneous production of domestic hot water. It is ideal for the production of hot water in apartments and, thanks to its thickness of only 17cm, it can also be installed in the tightest spaces Carbon monoxide poisoning: risk 0 One is a sealed chamber water heater . This means that it has no interchange with the environment in which it is installed. It draws air from outside and expels the burnt fumes through a fan always in an external environment, thus avoiding the risk of monoxide poisoning. Low pressure in the system? One can also be installed in systems with low hydraulic supply pressures, thanks to the ignition already starting from 0.1 bar. N.1 in efficiency and eco-sustainability: energy efficiency class A+, it guarantees quick installation also thanks to its compact size. It has a progressive LC code which signals any limescale deposits and allows for preventive action. Remote control to manage the hot water temperature from anywhere in the house. It is possible to connect up to 3 accessory controls, to manage the temperature from any point of use, such as in the kitchen or bathroom and immediately have hot water at the desired degree. It offers the possibility of perfecting the temperature at the tap: from +1°C to +3°C, if there are distances between the water heater and the utilities which cause heat loss. If you are a private individual, Rinnai offers you a 4-year warranty extension by registering your new water heater. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Water heater Gas water heater RINNAI INFINITY 17i complete with smoke kit cod. REU-A1720FFU LPG - NEW Code REU-A1720FFU Internal installation Device type C Energy class A Load profile L Available versions Natural gas, LPG, propane air Thermal Capacity (kW) min 4.1 / Max 32.40 Hydraulic flow rate (l/min) min 2 l/min MAX 17 l/min (20 l/min ∆T=15°C) Max settable temperature (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Standard antifreeze, down to -15°C Dimensions WxDxH 373x173x541 mm LPG INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 8 -18 Characteristics of heating/DHW operation: Part number: REU-VCM2837WD-LPG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 1000 Can be combined in cascade, max 25 luminaires Standard antifreeze down to -20°C Installation: Outdoor - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 - 20 Kg Natural gas heat input Min/Max (kW) 2.8/52 Water flow Δt 25°C Min/Max (l/min) 28 l/min Max operating temperature (°C) 85 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 2.5/10 Electricity consumption normal / stand-by / antifreeze (W) 65 / 2 / 104 IPX5D protection Class NOx5 LPG version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control External installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Scaldabagno da esterno a condensazione Rinnai Infinity Enjin 20e REU-E2024W-E Metano  Caratteristiche tecniche: Codice scaldabagno da esterno domestico a condensazione REU-E2024W-E Profilo / Classe energetica XL/A Consumo annuo di energia elettrica (kWh/annum) e combustibile (GJ/annum) 13 - 22 Installazione all'esterno Predisposizione per integrazione solare / accumulo Condensazione ULTRA LOW NOx Dimensioni (A x L x P) (mm) 531x351x191; 17 Kg Tipologia apparecchio TIPO A FLUSSO FORZATO Portata termica MAX metano (kW) 33,9 Portata idraulica con ∆t 25 °C (l/min) 24 Portata idraulica MAX (l/min) 20 Comando remoto di serie Antigelo di serie (°C) -20 Grado di protezione IPX5D Temperatura d’esercizio MAX (°C) 65 Pressione minima attivazione (bar) 0 Predisposizione per abbinamento con ricircolo RCD-XHF Gas Metano Infinity Serie Enjin - Scaldacqua domestici a condensazione L’ecosofia della condensazione nell’acqua calda sanitaria Engineering Excellence 10 anni dopo aver rivoluzionato il mercato italiano della produzione di acqua calda con gli scaldacqua Infinity, Rinnai alza l’asticella e lancia il primo produttore sanitario a condensazione domestico. Altamente efficiente, il nuovo scaldabagno residenziale a condensazione istantaneo Infinity serie Enjin garantisce costi di gestione ridotti, minore utilizzo di combustibile e performance ulteriormente migliorate. Racchiuso in un design che sa essere al contempo rassicurante e contemporaneo, il nuovo Enjin è anche estremamente resistente e facile da installare e quindi la scelta migliore per le esigenze di acqua calda sanitaria di casa. I COMPONENTI di qualità che costruiscono il benessere Tanta acqua calda a condensazione, nessuno spreco. H2 ready Gli scaldabagni Infinity sono pronti per la nuova era energetica. Possono essere alimentati con gas metano miscelato fino al 30% di idrogeno, unafeature importante verso la sostenibilità. A prova di bufera Tutti i modelli da esterno sono omologati IPx5D e provvisti di kit antigelo di serie fino a -20°C. Queste caratteristiche li rendono installabili all’esterno senza bisogno di protezioni aggiuntive e con estrema facilità, senza allacciamenti a canne fumarie. Getti d’acqua fredda sotto la doccia? Grazie al regolatore di portata tutti gli Infinity garantiscono un flusso continuo di acqua calda a temperatura costante senza sbalzi né interruzioni. Questa funzionalità esclusiva risolve qualsiasi problema di fluttuazione della temperatura, aumenta il comfort e la sicurezza di utilizzo anche da parte delle utenze più deboli e nei sistemi che utilizzano l'acqua calda per processi di produzione. Siamo maniaci della perfezione al grado Quando lo scaldacqua deve essere installato distante dalle utenze e le tubazioni generano dispersioni termiche, è possibile installare il kit per ricircolo sanitario accessorio e il Tecnico può modificare la temperatura al rubinetto da +1°C a +3°C colmando il gap con estrema facilità. I vantaggi della condensazione.Un regalo speciale per te e per il Pianeta. Le Persone e il Pianeta hanno bisogno di un cambiamento, che deve essere etico e perseguibile. Per questo il nostro impegno è, prima di tutto, nel miglioramento continuo degli apparecchi che produciamo, affinché funzionino bene, siano durevoli e utilizzino al meglio la fonte energetica disponibile. Negli scaldacqua a flusso continuo convenzionali il vapore acqueo risultante dal processo di combustione del gas fuoriesce sottoforma di prodotto di scarico gassoso. Negli scaldacqua a condensazione a flusso continuo il calore latente di combustione viene recuperato, reimmesso in circolo e utilizzato nuovamente per preriscaldare l’acqua fredda in ingresso. Infinity Enjin recupera oltre il 90% dell'energia prodotta. Questo significa alta efficienza. Un regalo per te e per il PianetaAcquistando un prodotto a condensazione Rinnai contribuirai direttamente alla protezione delle api. Ti basterà inserire i dati dello scaldabagno Infinity Enjin installato nel form online necessario ai fini della registrazione della garanzia convenzionale per ottenere in omaggio un coupon ed entrare a far parte dell’Oasi Rinnai. Beneficerai subito gratuitamente dell’adozione di un alveare, con il certificato di adozione e la APP per seguire la vita delle tue api. Nell’Oasi Rinnai i numeri ti mostreranno quanto conta il tuo gesto. Visita il sito per conoscere i dettagli dell’iniziativa Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Outdoor Gas Water Heater RINNAI INFINITY 14e LPG - NEW External installation Dimensions (H x W x D) (mm) 541x373x173 Energy Class A XL profile Max hydraulic flow rate Δt 25°C (l/min) 14 l/min Thermoregulation Digital Thermostat Can be cascaded No INFINITY Infinity 14 litres/min is an instantaneous producer of domestic hot water for outdoor installation with electronic temperature management via remote control, which can be installed at any point of use and water flow control. Corrosion resistant enamelled galvanized steel casing, antifreeze included as standard up to -20°C. The outdoor water heater does not need a fume exhaust, because it expels them directly from the inimitable front slot. For domestic use, Rinnai offers a free 4-year warranty extension by registering the product on this site. Energy class A. Unlimited hot water without sudden changes in temperature Temperature control to the degree Flow regulator: constant temperature as the flow varies External installation: does not require a fume exhaust Electronic ignition without pilot flame Free warranty extension on rinnai.it Progressive LC code that detects any limescale deposits Remote control to manage the hot water temperature from any point of use. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Outdoor Gas Water Heater RINNAI INFINITY 14e METHANE - NEW External installation Dimensions (H x W x D) (mm) 541x373x173 Energy Class A XL profile Max hydraulic flow rate Δt 25°C (l/min) 14 l/min Thermoregulation Digital Thermostat Can be cascaded No INFINITY Infinity 14 litres/min is an instantaneous producer of domestic hot water for outdoor installation with electronic temperature management via remote control, which can be installed at any point of use and water flow control. Corrosion resistant enamelled galvanized steel casing, antifreeze included as standard up to -20°C. The outdoor water heater does not need a fume exhaust, because it expels them directly from the inimitable front slot. For domestic use, Rinnai offers a free 4-year warranty extension by registering the product on this site. Energy class A. Unlimited hot water without sudden changes in temperature Temperature control to the degree Flow regulator: constant temperature as the flow varies External installation: does not require a fume exhaust Electronic ignition without pilot flame Free warranty extension on rinnai.it Progressive LC code that detects any limescale deposits Remote control to manage the hot water temperature from any point of use. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Outdoor gas water heater RINNAI INFINITY 17e METHANE cod. REU-A1720W-E - NEW External installation Dimensions (H x W x D) (mm) 541x373x173 Energy Class A XL profile Max hydraulic flow rate Δt 25°C (l/min) 17 l/min Thermoregulation Digital Thermostat Can be cascaded No INFINITY Infinity is an instantaneous producer of domestic hot water for outdoor installation with electronic temperature management via remote control, which can be installed at any point of use and water flow control. Corrosion resistant enamelled galvanized steel casing, antifreeze included as standard up to -20°C. The outdoor water heater does not need a fume exhaust, because it expels them directly from the inimitable front slot. For domestic use, Rinnai offers a free 4-year warranty extension by registering the product on this site. Energy class A. Unlimited hot water without sudden changes in temperature Temperature control to the degree Flow regulator: constant temperature as the flow varies External installation: does not require a fume exhaust Electronic ignition without pilot flame Free warranty extension on rinnai.it Progressive LC code that detects any limescale deposits Remote control to manage the hot water temperature from any point of use. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Rinnai Infinity Sensei N26E REU-N2635WC-E-NG Natural gas outdoor condensing water heater - NEW External installation Dimensions (H x W x D) (mm) 670x470x276 Energy Class A XL profile Max Hydraulic Flow Δt 25°C (l/min) 26 l/min Thermoregulation Digital Thermostat Can be cascaded Yes sensei Rinnai presents Infinity Sensei, the masters of condensation, the brand new range of instant gas condensing water heaters of 26 and 32 litres/minute, for indoors or outdoors. Ultra performing on their own, perfect in cascade installations, where they express all their potential by satisfying even the most important hot water production needs in commercial premises, accommodation facilities, production plants and much more. Condensation is ECO-SUSTAINABLE TECHNOLOGY In condensing technology, the water vapor contained in the combustion products is also used to generate heat. For this reason, the Infinity Sensei series condensing water heaters reduce consumption by up to 30% and polluting emissions (NOx and CO₂) by up to 70%. DID YOU KNOW THAT? In professional applications, only the condensing sanitary production is compliant with the law. The Ministerial Decree "Minimum requirements" of 6/26/2015 regulates both heating and the production of domestic hot water, also called, like heating, to respect a minimum efficiency on the PCI equal to 90 + 2 log Pn . This value can only be reached with condensation . From the entry into force of the decree, in order to have parameters of polluting emissions and energy efficiency compliant with the legislation, all economic entities that use hot water professionally must use gas-fired producers only of the condensing type in all cases ( replacement, renovation and new construction). The Infinity Sensei condensing water heaters they are perfectly compatible with renewable sources they can manage up to 4 additional remote commands for temperature control from different points of use have an increasingly user-friendly electronic board, which allows you to set and monitor the operating parameters directly from the standard remote control. The Technician can activate the Service Soon parameter, a warning signal for scheduled maintenance, functional to guarantee the periodicity of the assistance interventions, which preserve the longevity of the systems. Optimal combustion, even in the mountains The Infinity SENSEI condensing appliances, like all the new Rinnai water heaters, are equipped with the high altitude function that the technician can set in addition to the 900m altitude where the air is rarefied. Installation in cascade and in Modus Infinity Sensei for indoor or outdoor use can be connected to each other in certified turnkey systems that allow all the security of perfect sizing with respect to system requirements. Several devices can be managed in an optimal way, as if they were a single fully modulating machine. The Modus can connect up to 10 producers in series and can be further combined with each other. Sensei: even better. Cascade management becomes smarter, with a single connector that connects up to 24 luminaires and a new IP addressing system for Master-Slave management, functional for a uniform distribution of the workload among all the luminaires that make up the module . Sensei from outside Infinity Sensei N26e condensing litres/min series is an instantaneous domestic hot water producer for outdoor installation . Rinnai patented R-Evolution heat exchanger, new metal fiber burner, zero governor valve, full condensation. Anti-corrosion and anti-freeze enamelled galvanized steel casing included as standard up to -20°C. Like all condensing models, N26e is compatible with Rinnai Modus systems for easy installation of multiple appliances in medium and large professional systems. For domestic use, with the first ignition free of charge by an authorized technician, Rinnai offers a free 4-year warranty extension. Energy efficiency class A. Unlimited hot water without sudden changes in temperature Flow regulator: constant temperature as the flow varies Temperature control to the degree For domestic use, free initial testing with free warranty extension, by an authorized Rinnai Technician Electronic ignition without pilot flame Outdoor installation: no fumes exhaust required Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION The product is available to order! Rinnai Infinity N32I indoor condensing water heater Complete with flue gas kit REU-N3237FFC-E-NG Methane - NEW Internal installation Dimensions (H x W x D) (mm) 670x470x276 Energy Class A XXL profile Max hydraulic flow rate Δt 25°C (l/min) 32 l/min Frontal Display Thermoregulation Can be cascaded Yes Internal installation / Villa - Apartment with multifunctional shower, hydromassage / Professional installation sensei Rinnai presents Infinity Sensei, the masters of condensation, the brand new range of instant gas condensing water heaters of 26 and 32 litres/minute, for indoors or outdoors. Ultra performing on their own, perfect in cascade installations, where they express all their potential by satisfying even the most important hot water production needs in commercial premises, accommodation facilities, production plants and much more. Condensation is ECO-SUSTAINABLE TECHNOLOGY In condensing technology, the water vapor contained in the combustion products is also used to generate heat. For this reason, the Infinity Sensei series condensing water heaters reduce consumption by up to 30% and polluting emissions (NOx and CO₂) by up to 70%. DID YOU KNOW THAT? In professional applications, only the condensing sanitary production is compliant with the law. The Ministerial Decree "Minimum requirements" of 6/26/2015 regulates both heating and the production of domestic hot water, also called, like heating, to respect a minimum efficiency on the PCI equal to 90 + 2 log Pn . This value can only be reached with condensation . From the entry into force of the decree, in order to have parameters of polluting emissions and energy efficiency compliant with the legislation, all economic entities that use hot water professionally must use gas-fired producers only of the condensing type in all cases ( replacement, renovation and new construction). The Infinity Sensei condensing water heaters they are perfectly compatible with renewable sources they can manage up to 4 additional remote commands for temperature control from different points of use have an increasingly user-friendly electronic board, which allows you to set and monitor the operating parameters directly from the standard remote control. The Technician can activate the Service Soon parameter, a warning signal for scheduled maintenance, functional to guarantee the periodicity of the assistance interventions, which preserve the longevity of the systems. Optimal combustion, even in the mountains The Infinity SENSEI condensing appliances, like all the new Rinnai water heaters, are equipped with the high altitude function that the technician can set in addition to the 900m altitude where the air is rarefied. Installation in cascade and in Modus Infinity Sensei for indoor or outdoor use can be connected to each other in certified turnkey systems that allow all the security of perfect sizing with respect to system requirements. Several devices can be managed in an optimal way, as if they were a single fully modulating machine. The Modus can connect up to 10 producers in series and can be further combined with each other. Sensei: even better. Cascade management becomes smarter, with a single connector that connects up to 24 luminaires and a new IP addressing system for Master-Slave management, functional for a uniform distribution of the workload among all the luminaires that make up the module . Internal Sensei Infinity Sensei series 26 litres/min condensing is an instantaneous domestic hot water producer for indoor installation. Rinnai patented R-Evolution heat exchanger, new metal fiber burner, zero governor valve, full condensation. Anti-corrosion and anti-freeze enamelled galvanized steel casing included as standard up to -20°C. Like all condensing models, N26i is compatible with Rinnai Modus systems for easy installation of multiple appliances in medium and large professional systems. For domestic use, with the first ignition free of charge by an authorized technician, Rinnai offers a free 4-year warranty extension. Energy efficiency class A. Unlimited hot water without sudden changes in temperature Flow regulator: constant temperature as the flow varies Temperature control to degree For domestic use, free initial test with free warranty extension, by an authorized Rinnai Technician Electronic ignition without pilot flame Control panel on the bridge for managing the water temperature. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less