Beretta open chamber water heater mod. FONTE LX 14 lt Low NOx LPG - NEW ErP ENERGY LABEL SPECIFICATIONS ACCORDING TO EUROPEAN ErP DIRECTIVE Sanitary energy efficiency Class A Sanitary load profile - M Characteristics Typology - Open chamber Draft - Natural draft Ignition - 2 x 1.5V batteries Flame control - by ionization Flame modulation - continued Hot water production ∆t=30° litres/min 11.6 Nominal heat input (G20 / G30-G31) kW 28.0 / 28.0 Rated thermal power (G20 / G30-G31) kW 24.36 / 24.75 Waterfall Withdrawal range - Idle selector litres/min from 2.5 to 6.5 Withdrawal range - Selector at maximum litres/min from 2.5 to 14 Water temperature elevation - Selector at minimum °C 50 Water temperature elevation - Selector at maximum 25 °C Minimum / normal / maximum pressure bar 0.2 / 2 / 10 Ø water connections - 1/2” DHW temperature selection range °C 35-60 Gas Nominal gas supply pressure (G20) mbar 20 Ø gas connection - 1/2” Dimensions and weight Dimensions (HxWxD) mm 675x350x230; 12Kg SOURCE LX new Low NOx open chamber water heater Within the new generation of low NOx emission products, Beretta presents Fonte Lx, the new instantaneous open chamber water heater, entirely Beretta signature both for know-how and for industrialization. The new Fonte Lx range, completely renewed in terms of aesthetics and planning, consists of two models, 11 and 14 liters respectively, available in both methane and LPG versions, with dedicated codes, able to offer maximum sanitary comfort in compliance with recent European regulations for the reduction of NOx emissions. The compactness and modernity of the design allow Fonte Lx to be easily placed in any living context, characteristics which, together with the simplicity of maintenance and use for the end user, distinguish Fonte Lx as a very appreciable product in the panorama of residential comfort. Modern and intuitive control panel Fonte Lx stands out for its ease of use for the end user, a feature that reconfirms one of the drivers of Beretta's technological research since its origins, aimed at creating products with maximum usability. The design of the new panel, modern and linear, in line with the new generation Beretta products, is characterized by an intuitive, backlit display, which immediately displays the water temperature in °C and the diagnostics of any anomalies, together with two icons indicating the presence of a flame and the battery charge level. Three command keys allow the end user to manage all the functions of the water heater. On the panel there is also a led that flashes when the battery level is low, thus signaling the need for their replacement. Characteristics Instantaneous open chamber water heater with dedicated methane and LPG versions Battery ignition (2 x 1.5V batteries supplied as standard) High sanitary load profile (XL on the 14 lt model) Abundant production of domestic hot water at Δt 25°C of 11 and 14 litres/min Innovative project design New self-adapting system with thermostatic device Increased modulation of power and domestic hot water flow, compared to the previous range Electronic reset from the user interface of the water and smoke thermostats, in the event of anomalies (RESET key) New Design Innovative interface with backlit display, 3 control keys and battery replacement LED Modern aesthetics and compact dimensions for an easy setting in any living context Ease of use Simple and intuitive command keys Immediate visualization of the temperature on the display Battery charge level shown on display with LED to signal replacement High comfort Wide picking range and comfort High stability of the temperature of the hot water supplied Delivery of domestic hot water even with minimum withdrawals or low pressure Less consumption Thanks to the advanced electronic modulating flame regulation system Easy to install and maintain Quick and easy installation with no need to remove the casing Innovative electronic gas valve without membrane for zero-time maintenance Latest generation low NOx burner The new FONTE Lx line is able to satisfy the most demanding requirements in terms of low emissions in force since September 2018, as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/kWh . Thanks to the innovative FONTE Lx burner of the hyperstoichiometric type, cooled by water, a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion is obtained, such as to satisfy the new limits of international legislation with full marks. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Energy class B L sampling profile Power supply 2x 1.5 V LR 20 Mechanical ignition Nominal heat input (min-max) 10.5 - 27 [kW] Nominal thermal power (min-max) 9 - 23 [kW] Water pressure (min-max) 0.2 - 10 [bar] Minimum operating temperature 5°C Air flow required for combustion 45.4 m3/h Minimum draft 12 Pa Characteristics Over-temperature thermostat Flame detection electrode Exhaust gas overheating detector Copper exchanger for greater durability Simple temperature setting, two knobs, one for regulating the water flow, the other for the gas level Led light that signals the need to change the batteries Excellent compatibility of water and gas connections for all installation conditions Dimensions Dimensions (HxLxW): 580x370x225mm

Read more less

Technical features Model : AtmoMAG mini 114/1 Z Methane Product code : 10022574 DHW energy efficiency class: A Ignition type: Piezoelectric Minimum power : 7.6 kW Maximum power : 18.1 kW Withdrawal rate: 11 l/min Flue connection diameter: 110 mm Gas - hydraulic pipes diameter: 1/2" - G1/2" Dimensions (HxWxD) 580x310x255 mm Vaillant AtmoMAG mini water heater Piezoelectric ignition water heaters. The ease of use, the compact dimensions, the simplicity of installation and the personalized management of the hot water make the atmoMAG XZ water heater the right choice for those looking for an excellent quality/price ratio without forgetting safety. AtmoMAG The cheapest and most flexible solution for quick and simplified replacements Comfort High hot water production Many models to satisfy every installation and ignition requirement savings Great reduction of gas consumption thanks to the flame self-modulation system Safety Reliability of every single component tested by Vaillant LabTest Heat exchanger with anti-thermal expansion system Simplicity Multiple selectable power levels It is controlled with only two knobs Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: ITEM OUT OF PRODUCTION, IN ITS ABSENCE IT WILL BE REPLACED WITH THE NEXT MODEL THERM 4204 Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU LPG code: T4200 11-2 31 Water heating energy efficiency class A Declared load profile M Open chamber with natural draft Nominal heat output (Pn) [kW] 19.2 Nominal heat input (Qn) [kW] 21.8 Max water flow with ΔT 25 °C [l/min] 11 Max water flow with ΔT 25 °C [l/min] 5.5 sound pressure max. [dB(A)] 69 Weight (without packaging) [kg] 11.7 Dimensions (H x W x D) [mm] 580 x 310 x 228 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4200 THERM 4200, the instantaneous gas water heater with compact dimensions, which reduces consumption and helps to protect the environment. Advantages ▶ Guarantees maximum safety thanks to a triple system which includes the smoke outlet sensor, the temperature limiter and the flame ionization control (which interrupts the gas flow in the event of ignition failure or accidental shutdown). ▶ Easily adjusted using the intuitive control panel ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶Electronic ignition by batteries ▶Continuous flame modulation ▶Works even in case of very low water pressures ▶Extremely compact size The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB; IN CASE OF LACK OF PRODUCT THE THERM 5600 MODEL WILL BE SHIPPED SO Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU Catalog code: 7736504152 LPG code: T4600 SO 18-31 Water heating energy efficiency class A Declared load profile: XL External installation Room Open to Natural Draft Nominal heat output (Pn) [kW] 31.6 Nominal heat input (Qn) [kW] 34 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 4.8-31.6 Flow rate of water supplied with ΔT 25 °C [l/min] 18 Flow rate of water supplied with ΔT 35 °C [l/min] 13 Efficiency at 100% of rated power [%] 92 sound pressure max. [dB(A)] 77 Power supply [V(AC)] 230 Maximum absorbed power [W] 228 Degree of electrical protection [IP] IPX5D Weight (without packaging) [kg] 12 Dimensions (H x W x D) [mm] 568 x 365 x 175 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4600 SO THERM 4600 SO is the outdoor water heater with extremely compact dimensions. It satisfies any space and installation requirement, does not require fume extraction/exhaust systems, is resistant to cold and bad weather thanks to the antifreeze device (up to -25 °C). Furthermore, it is installed outside but can be easily managed from inside the home, in an easy and intuitive way, thanks to the large remote control display (standard). Advantages ▶ It is installed outdoors and does not require fume extraction and exhaust systems ▶ Resists the cold and bad weather thanks to the standard antifreeze device ▶ It is supplied with the remote control with display for managing the operating temperature, easy and intuitive ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶ Instant gas water heater with sealed chamber and forced draught for outdoor use, available in the 12, 15 and 18 l/min versions; methane and LPG ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta open chamber water heater mod. FONTE LX 14 lt Low NOx Methane cod. 20149825 - NEW ErP ENERGY LABEL SPECIFICATIONS ACCORDING TO EUROPEAN ErP DIRECTIVE Sanitary energy efficiency Class A Sanitary load profile - M Characteristics Typology - Open chamber Draft - Natural draft Ignition - 2 x 1.5V batteries Flame control - by ionization Flame modulation - continued Hot water production ∆t=30° litres/min 11.6 Nominal heat input (G20 / G30-G31) kW 28.0 / 28.0 Rated thermal power (G20 / G30-G31) kW 24.36 / 24.75 Waterfall Withdrawal range - Idle selector litres/min from 2.5 to 6.5 Withdrawal range - Selector at maximum litres/min from 2.5 to 14 Water temperature elevation - Selector at minimum °C 50 Water temperature elevation - Selector at maximum 25 °C Minimum / normal / maximum pressure bar 0.2 / 2 / 10 Ø water connections - 1/2” DHW temperature selection range °C 35-60 Gas Nominal gas supply pressure (G20) mbar 20 Ø gas connection - 1/2” Dimensions and weight Dimensions (HxWxD) mm 675x400x230; 12Kg SOURCE LX new Low NOx open chamber water heater Within the new generation of low NOx emission products, Beretta presents Fonte Lx, the new instantaneous open chamber water heater, entirely Beretta signature both for know-how and for industrialization. The new Fonte Lx range, completely renewed in terms of aesthetics and planning, consists of two models, 11 and 14 liters respectively, available in both methane and LPG versions, with dedicated codes, able to offer maximum sanitary comfort in compliance with recent European regulations for the reduction of NOx emissions. The compactness and modernity of the design allow Fonte Lx to be easily placed in any living context, characteristics which, together with the simplicity of maintenance and use for the end user, distinguish Fonte Lx as a very appreciable product in the panorama of residential comfort. Modern and intuitive control panel Fonte Lx stands out for its ease of use for the end user, a feature that reconfirms one of the drivers of Beretta's technological research since its origins, aimed at creating products with maximum usability. The design of the new panel, modern and linear, in line with the new generation Beretta products, is characterized by an intuitive, backlit display, which immediately displays the water temperature in °C and the diagnostics of any anomalies, together with two icons indicating the presence of a flame and the battery charge level. Three command keys allow the end user to manage all the functions of the water heater. On the panel there is also a led that flashes when the battery level is low, thus signaling the need for their replacement. Characteristics Instantaneous open chamber water heater with dedicated methane and LPG versions Battery ignition (2 x 1.5V batteries supplied as standard) High sanitary load profile (XL on the 14 lt model) Abundant production of domestic hot water at Δt 25°C of 11 and 14 litres/min Innovative project design New self-adapting system with thermostatic device Increased modulation of power and domestic hot water flow, compared to the previous range Electronic reset from the user interface of the water and smoke thermostats, in the event of anomalies (RESET key) New Design Innovative interface with backlit display, 3 control keys and battery replacement LED Modern aesthetics and compact dimensions for an easy setting in any living environment Ease of use Simple and intuitive command keys Immediate visualization of the temperature on the display Battery charge level shown on display with LED to signal replacement High comfort Wide picking range and comfort High stability of the temperature of the hot water supplied Delivery of domestic hot water even with minimum withdrawals or low pressure Less consumption Thanks to the advanced electronic modulating flame regulation system Easy to install and maintain Quick and easy installation with no need to remove the casing Innovative electronic gas valve without membrane for zero-time maintenance Latest generation low NOx burner The new FONTE Lx line is able to satisfy the most demanding requirements in terms of low emissions in force since September 2018, as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/kWh . Thanks to the innovative FONTE Lx burner of the hyperstoichiometric type, cooled by water, a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion is obtained, such as to satisfy the new limits of international legislation with full marks. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Product name GAS WATER HEATER VAILLANT ATMOMAG 14-0/1 XI LPG. Open Room WITH NATURAL DRAFT Technical features ErP energy class: Class A Nominal heat output: 24.4 kW DHW direct withdrawal range T = 25C: 2.5 - 14 l/min Chamber Open to natural draught Ignition: electronic Compact dimensions (HxDxL): 680/270/350 mm Power supply: LPG General characteristics ATMOMAG Instantaneous water heaters with electronic battery ignition. AtmoMAG XI are natural draft water heaters with electronic ignition powered by batteries. Saving safety without the aid of electricity. The Direct Start system allows for faster ignitions. The ionization flame detection ensures operational safety. The adoption of the OPTI MOD system for flame regulation allows the water temperature to be adapted to the changing seasons with a quick gesture. In the mini version, characteristics and functionality remain unchanged and the small dimensions become the reason of choice in some living situations. atmoMAG XI (hot water production) the atmospheric version with DHW flow rate of: 14 litres/minute Methane LPG atmoMAG XI mini (hot water production) the atmospheric version with DHW flow rate of: 11 litres/minute Methane LPG Characteristics : Compact size Manual range selector Automatic flame modulation LCD display Domestic hot water Power selectable on 10 levels Ionization flame control New hydraulic unit Exchanger with Supral protection ErP and ELD: what it means and how they differ ErP: The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Eco design directive addresses two relevant product categories for installers and retailers in the sector: Category 1 includes space heaters; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD: In addition to the ErP directive, the EU has also introduced a mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and domestic hot water production be labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, it is possible to increase the energy classification of the system which will be calculated by the installer and indicated on the package label. Product Guarantee All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER BAXI mod. ACQUAPROJET 14I METHANE, Open Room WITH NATURAL DRAFT. Technical specifications Gas instantaneous water heaters Chamber Open to natural draught Nominal heat input kW 25.8 Nominal thermal power kW 22.7 Minimum thermal power kW 7.7 Minimum heat input kW 8.8 Operating water pressure 0.2-6 bar Water withdrawal range l/min 3-13 Maximum outlet water temperature C 65 Discharge pipe diam. 132mm Dimensions hxwxd mm 585x360x220 ; kg 10.5 METHANE version Features list ACQUAPROJET: the NEW instantaneous gas water heater Baxi offers a new instantaneous gas water heater, with Open Chamber and 2 Chamber models - Sealed Chamber water heaters of 11 and 13 l/min Open Chamber Models 11- 14 l/min Battery electronic ignition Electronic detection of flame presence Gas valve with modulation proportional to the water flow rate to keep the outlet temperature stable Minimum ignition flow 2.9 l/min Battery status LED indicators LPG conversion kit available as an option Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION: OFFER VALID UNTIL STOCKS LAST! Overview ARISTON FAST EVO B 11 EU METHANE GAS WATER HEATER with battery Cod. 3632215 - new ErP model Open Chamber NATURAL DRAFT Technical specifications Product code: 3632215 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: profileM Characteristics of heating/DHW operation: CE certification (pin) 0063CN7240 Category II 2H3+ Type B11BS Electronic ignition Power supply: 2x1.5V LR20 batteries Chamber Open to natural draught Nominal heat output: 19 kW Minimum thermal power: 8 kW Nominal heat input: 21.5 kW Combustion efficiency (fumes): >89% Min/max temperature selectable: 35-65C Flow rate (T 25C): 11 l/min Minimum operating flow: >2 l/min Dimensions (HxLxP): mm 580 x 310 x 210; 9.6kg Power supply: METHANE Main features Fast EvC/B EU Fast Evo: The new range of instantaneous gas-fired water heaters in the Open Chamber version with high efficiency and reliability standards (11,14 and 16 l/min) Simple, reliable and intuitive Fast EVO Ariston brings the evolution of the Open Chamber gas water heater to every home. High standards of efficiency and great reliability for 2 models with different types of ignition: rechargeable battery and knob for Fast EVO B and power supply cable and LCD display for Fast EVO C. Both versions ensure high performance and considerable savings in terms of consumption. the Fast EVO water heater offers numerous advantages, starting from the continuous flame modulation thanks to the NTC probe located at the exchanger outlet, which guarantees maximum temperature stability. In case of fluctuations in the water flow rate (2 l/min minimum variation threshold), the new Fast EVO, thanks to the NTC probe and the electronic card, manages to keep the temperature stable with better performance compared to the models considered top of the market. Fast EVO also equipped with water flow switch, humid chamber copper exchanger and electronic flame detection; the minimum operating pressure of 0.1 bar allows the product to operate in the most extreme conditions, while the minimum ignition flow rate is 2 l/min. Overtemperature protection makes it safer to use. Advantages: The innovative water heater available in the version with electric power cable and LCD display (FAST EVO C) or with rechargeable battery (FAST EVO B) Intuitive control panel with LCD display (model C) Continuous flame modulation thanks to the NTC probe located at the exchanger outlet (maximum temperature stability Minimum operating pressure 0.1 bar Minimum ignition flow rate 2 l/min Presence of the water flow switch "Humid chamber" copper heat exchanger Electronic detection of flame presence External temperature regulation: Allows the user to choose the temperature that best suits his needs Electronic control: Electronic control panel for easier and more immediate use. High efficiency: Product characterized by high energy performance, reduction of consumption and polluting emissions. Can be integrated with Solar : Suitable solar integration through a thermostatic valve which allows the water heater not to start in the event that the temperature of the water preheated by the solar system is higher than the desired temperature, guaranteeing high energy savings Ecodesign Directive In fact, after very long negotiations, the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing boilers on the market starting from 26 September 2015. This means that starting from this date, anyone wishing to install a boiler in their own home will have to install only condensation. Only a particular type of non-condensing boiler will continue to be produced which is technically called "Open Chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings. What is energy labelling Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies on end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. From 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks ),. How to read energy labels There are different labels, based on the type and function of the product (both space and water heating, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in a system. In this case it is necessary to prepare a system label in addition to that relating to the individual product. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR OUTDOOR LNX MODEL WILL BE SHIPPED AT THE END OF STOCKS CHAFFOTEAUX FLUENDO AVENIR OUTDOOR WATER HEATER 24 LT EU METHANE - NEW ErP Technical features Product code: 3632266 Energy label specifications according to the European ErP directive Sanitary Energy Efficiency Class B Withdrawal profile: XXL Description: Model: 24 LT EU Professional Range Ignition: electronic flame ionization Type: Forced flow open chamber for outdoor use Dimensions (hwxd): 582 x 375 x 160mm ; 17.5Kg Operating characteristics: Nominal heat input : 47 kW Nominal heat output: 42.3 kW Methane/LPG supply pressure: 20/37 mbar Consumption - Methane/LPG max flow rate/h: 4.92/3.62 m3/h Selectable min/max temperature: 35-70°C Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 3.8 l/min Flow rate with temperature difference (∆t 25°C): 24 l/min Electrical circuit: Maximum absorbed power: 63 kW Electrical protection type: IPX5D Diet: Gas: LPG or CNG Chaffoteaux confirms its specialized expertise in the design and manufacture of high quality products and systems for environmental comfort and sanitary water, expanding the range of instantaneous gas water heaters with the professional models of Fluendo Avenir Outdoor. Fluendo Avenir Outdoor is now also available in the new 20 and 24 l/min versions which allow cascade installation of up to a maximum of five products with a special control unit. The introduction of these two new professional models, which join the 11 and 16 l/min configurations for domestic use, makes this range extremely flexible with a thermal power that can vary from 4 kW to 211.5 kW.i. External installation. Ideal for installations with smoke evacuation problems. Minimum activation pressure 0.1 bar. Overtemperature control. Standard antifreeze kit: up to -20°C. Possibility of cascade installation (up to max 5 products) with PROFESSIONAL models. Characteristics: Ease of use - The user can adjust the domestic hot water to the desired temperature between 35° and 70°C using a wired remote control for remote temperature viewing and modification. Presence in the packaging of the 30-meter cable for the remote control. Easy installation - With the new Fluendo Avenir Outdoor installation times and related costs are reduced. All this thanks to its compact size, low weight and outdoor installation. The gas water heater <35 kW for single-family use is released from the limitations of Legislative Decree 192/05. Easy maintenance - Maintenance of the water heater is facilitated by the ability to view error codes on the remote control's LCD display. The components are replaceable from the front. Dedicated filters that clean easily. High efficiency - performance above 90% efficiency thanks to pre mix technology (modulation ratio up to 1:6). Speed ​​modulation - optimization of maximum efficiency also thanks to the modulating fan. Automatic flow regulator with stepper motor - In order to obtain maximum hot water delivery stability, the automatic flow regulator reduces the water flow until the desired temperature is obtained Sanitary comfort Modulating: allows great energy savings and offers greater comfort with a stable temperature in the presence of simultaneous requests for hot water. Thermostatic: high precision NTC probes to measure the cold water inlet temperature and hot water outlet temperature. Solar kit: the thermostatic valve allows you to connect the water heater to solar systems. An ecological solution to save energy. Cascade: possibility of managing up to 5 products with a special control unit (PROFESSIONAL RANGE). Flexibility: up to 211.5 kW of thermal power. Comfort of use and installation Minimum depth of only 13 cm (models for domestic use). Compatible with solar systems for greater gas savings. Maximum security thanks to installation outside the home. Quick and easy installation thanks to the fact that it does not require a smoke outlet. Standard antifreeze kit and maximum electrical protection IPX5D. Standard wired remote control to view and change the temperature. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

JUNKERS HYDROCOMPACT OUTDOOR 18 LT mod. WTD 18 AM EO CNG IN THE ABSENCE OF THE PRODUCT, THE NEW METHANE THERM 5600 SO 18 MODEL WILL BE SUPPLIED Technical features DHW energy efficiency class (ErP) Catalog code: WTD 18 AM E Declared load profile: XL Instant gas water heater Forced draft sealed chamber Flame ionisation electronic ignition Nominal heat output: 31.6 kW Nominal heat input: 34 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Flow rate of water supplied with DT 25 °C: 18 l/min Minimum operating flow: 2.2 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25 °C (accessory) Remote control: accessory Display: LCD multifunction Degree of protection: IPX4D Dimensions (LxWxH): mm 175x364x568 Version: CNG General characteristics Hydrocompact Indoor: Compact gas instantaneous water heaters for indoor use Do you have little space available but don't want to give up the usual quality and comfort? HYDROCOMPACTINDOOR was born, the new compact water heater in the Junkers range: all the usual comfort in very little space! The most compact ever HYDROCOMPACT INDOOR is the smallest indoor water heater available on the market. All Junkers quality and high technology are enclosed in just 17 cm depth (12 and 15 l/min models)! Easily placed inside a wall unit of your kitchen (in compliance with current regulations), the new HYDROCOMPACT INDOOR represents the best solution for those with space problems: thanks to its extremely compact dimensions, in fact, it is able to satisfy any need of space and installation. The simplicity of great technology Thanks to the new Junkers patented Optiflow technology, HYDROCOMPACTINDOOR is able to automatically recognize the lengths of the flue gas intake and exhaust system. This intelligent system helps to increase the efficiency of the product, improving its performance and reducing consumption. The large display integrated in the appliance also makes it possible to manage and program its operation with extreme simplicity and to set the water temperature just as easily, according to the different comfort needs. Furthermore, for the more <span">demanding customers, it is possible to view all the information present on the integrated display also on the remote control (accessory). Thanks to the new patented OptiFlow technology, HYDROCOMPACTINDOOR is able to automatically calculate the combustion air flow, based on the power absorbed by the fan and the rotation speed of the fan itself. This guarantees: optimum efficiency of the appliance in all operating conditions the reduction of the minimum power without the risk of condensation forming on the heat exchanger very low levels of CO2 emissions Furthermore, the automatic adaptation of the fan speed to the installation conditions (length of the <span">intake/exhaust ducts and any obstructions) ensures simpler and faster installation. Small consumption, great performance With HYDROCOMPACTINDOOR, optimization of consumption is guaranteed! Thanks to the high efficiency and the wide modulation range (1:7) the water heater is able to adapt the gas consumption necessary to heat the water to the actual DHW withdrawal request, thus guaranteeing all the desired DHW comfort and the maximum savings. Furthermore, HYDROCOMPACTINDOOR can be directly connected to solar thermal systems for the production of domestic hot water: all the energy of the sun for maximum comfort and minimum consumption! Characteristics: Extremely compact dimensions: it is the smallest instantaneous gas water heater available on the market for indoor use <span">Automatic recognition of the lengths of the flue gas intake/exhaust system thanks to the patented OptiFlow technology Efficiency up to 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Easy and intuitive management, thanks to the large LCD display for adjusting the temperature and viewing information relating to the operation of the appliance Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min devices High sanitary comfort and reduction of gas consumption thanks to the electronic temperature control (stability ± 1°C) Reduction of consumption thanks to the wide modulation range (1:7) <span">Ability to remotely manage the water heater thanks to the accessory control <span">Elegant design Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OFFER - Immergas Julius Open Chamber Water Heater 14 liters Methane 3.025675LPG DHW energy class A Maximum nominal heat input kW (kcal/h) 27.3 (23,446) Maximum useful thermal power kW (kcal/h) 24.4 (20,984) Minimum nominal heat input kW (kcal/h) 11.1 (9,588) Minimum useful thermal power kW (kcal/h) 9.8 (8,428) Specific flow rate in continuous service of domestic hot water (∆t 25 °C ) in mixing l/min 14.0 Power supply 2 x LR20 1.5V batteries Dimensions HxWxD 630x350x230 mm JULIUS ECO ULTRA COMPACT DESIGN The small overall dimensions (only 23 cm deep) allow it to be installed even in vlocali with limited spaces or inside the kitchen wall units. EXCELLENT TEMPERATURE CONTROL The modulating gas valve chokes the gas flow to the burner ensuring a consumption proportional to the quantity of domestic hot water requested by the user. ELECTRONIC BATTERY IGNITION It allows the devices to be installed even in environments without an electrical network. FIREPLACE SAFETY DEVICE In the event of insufficient chimney draft, it intervenes by switching off the water heater Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less