Riello Mini 13 LN Low NOx sealed chamber water heater complete with methane fume exhaust kit Sanitary energy efficiency: Class A Load profile: L profile Forced draft sealed chamber PNominal heat input 25 kW Useful efficiency at max-min power: 91.8-84.0% Min/normal/max pressure bar 0.15/2/10 Domestic hot water production: 13 l/min Min. withdrawal: 2.5 l/min Power supply V/Hz 230/50 Electrical protection degree IP X4D Dimensions Dimensions (HxWxD): 642×340×237 mm Weight: 18Kg RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: AcquaFun2 LN 11 Product code : 20149831 Gas : LPG Energy efficiency Sanitary energy efficiency class: A Sanitary load profile : M Sanitary energy efficiency (ηwh) : 77.2% Daily gas consumption : 8.084 kW/h Annual gas consumption : 6 GJ Emissions of nitrogen oxides: 46 mg/kWh Characteristics Typology : Open chamber Draft Natural draft Ignition : 2 x 1.5V batteries Flame control : By ionization Flame modulation : Continue Hot water production Δt=30° : 9.3 litres/min Nominal heat input : 21.0 ~ 22.0 kW Rated heat output: 18.33~19.43kW Performance Water Withdrawal range with selector at minimum : from 2.5 to 5.5 litres/min Withdrawal range with selector at maximum : from 2.5 to 11 litres/min Water temperature rise with selector at minimum : 50°C Water temperature rise with selector at maximum : 25°C Minimum ~ normal ~ maximum pressure : 0.2 ~ 2.0 ~ 10.0 bar Water connections: 12.70 mm 1/2” Ø DHW temperature selection range: 35° ~ 60° C Performance Gases Nominal supply pressure G20,G30,G31 : 20/28 ~ 30/37 mbar Gas connections: 12.70 mm 1/2” Ø Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Electrical protection degree : IPX4D Dimensions and weight Dimensions (HxWxD): 675x350x230 mm Net weight : 12.0 Kg Riello ACQUAFUN 2 LN water heater The new Low NOx open chamber water heater Riello presents Acquafun 2 LN, the new instantaneous open chamber water heater, fully signed by Riello both in terms of design and manufacturing. Product that is part of the new offer of low NOx emission products able to offer maximum sanitary comfort in compliance with the recent European regulations for the reduction of NOx emissions. The new range is available in two sizes, 11 and 14 litres, available in both CNG and LPG versions, with dedicated codes. Acquafun 2 LN, completely renewed in the aesthetic and planning design, is ideal for installation in any living context, characteristics which, together with the simplicity of maintenance and performance for the end user, distinguish Acquafun 2 as an ideal solution for the production of domestic hot water for residential use. Latest generation burner with reduced Nox emissions The innovative water-cooled hyperstoichiometric type burner allows a significant reduction in the polluting values ​​of carbon monoxide and nitrogen produced by combustion, in compliance with the demanding requirements of EU Regulation 814/2013 which requires emissions equal to or lower than 56 mg/kWh The high heat output , together with the wide flame modulation, up to 45% of the nominal output, complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort . Simple and intuitive command interface Simple and intuitive backlit display with visualization of water temperature in °C, flame presence and battery charge level Three command buttons allow you to manage all the water heater functions Ease of use for the user due to the keys with symbols dedicated to the single user functions Immediate availability of hot water The innovative electronic gas valve combined with the pressure regulator allows the immediate delivery of the power in delivery, thanks to a controlled management of the flowmeter and the NTC temperature probe. The new electronics allow simplified maintenance and high-level performance. 1. NTC temperature probe 2. Limit thermostat with reset from display 3. Exchanger 4. Cooled burner 5. Electronic gas valve with pressure regulator 6. Flow restrictor 7. Flowmeter 8. Temperature regulator EAF Cold water inlet UAC Hot water outlet The new Acquafun2 LN range is characterized by the rapid achievement of the desired hot water temperature, offering optimal comfort. Product guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO ACQUAFUN2 14 METHANE WATER HEATER: Open Chamber water heater specifically dedicated to the production of hot water only. Technical specifications Product code: 20019746 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: profileL Characteristics of heating/DHW operation: Useful power - firebox: 23.7 - 27.2 kW Efficiency at max power: 87.1% Open room, natural draught Min/normal/max pressure bar 0.2/2/10 Camppreliev selector max 40C: 6.7£13.6 l/min Domestic hot water production: 14 l/min Dimensions (hxlxp) mm 650 x 363 x 245 ; 12.6 kgs Power supply: METHANE Features list WATERFUN2 Methane gas LPG Open Room Automatic battery start Acquafun Open Chamber water heater for quick and easy installation without electrical connections thanks to battery power supply. It is available in two models: 11 and 14 litres. Characteristics: Automatic ignition by battery (1.5 Volt). Get rid of tension problems. The continuous flame modulation allows the selected temperature to be kept constant as the pressure and water flow vary, optimizing the combination with mechanical and thermostatic mixers. Economizer device to reduce gas consumption. Supplied battery (1.5 Volt €«¦ size C €«¦ half torch). No mains connection required. The economizer chokes the maximum power by 50% to adapt it to the various installations. Thanks to its particularly compact dimensions, it can be installed in homes with particularly limited spaces. ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of "Energy related Products" and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through a eco-design ("eco-design"). The field of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products for the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitory period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The energy labeling of products for heating domestic hot water production The regulations issued require that all products intended for heating and the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new mod to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as products with 4 - Heat Pump Water Heaters, as well as those on air conditioners, the efficiency data reported for the average climatic range. In addition to the product energy labels, European regulations have also provided for the creation of a system label in the case of creating a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); this faculty was also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Riello Mini 13 LN Low NOx sealed chamber water heater complete with LPG fume exhaust kit Sanitary energy efficiency: Class A Load profile: L profile Forced draft sealed chamber PNominal heat input 25 kW Useful efficiency at max-min power: 91.8-84.0% Min/normal/max pressure bar 0.15/2/10 Domestic hot water production: 13 l/min Min. withdrawal: 2.5 l/min Power supply V/Hz 230/50 Electrical protection degree IP X4D Dimensions Dimensions (HxWxD): 642×340×237 mm Weight: 18Kg RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Mini 17 LN Low NOx sealed chamber water heater complete with methane fume exhaust kit Typology: Forced Draft Sealed Chamber; Model: Mini 17 LN; Sanitary energy efficiency class: A; Sanitary load profile: L; Power supply:METHANE (G20/21); Daily gas consumption: 15,175 kW/h; Sanitary Energy Efficiency: 80.2%; Annual gas consumption: 11 GJ; Emissions of nitrogen oxides (Nox): 33 mg/kWh; Hot water production Δt=30°: 13.3 litres/min; Nominal heat input: 30.0 kW; Nominal thermal power: 27.90 kW; Min/max withdrawal range: 2.5/13 litres/min; Min/max pressure: 0.2/10.0 bar; DHW temperature selection range: 36-65°C ; Supply voltage: 230/50V/Hz; Electrical protection degree: IPX4D; Dimensions: (H×W×D) 640×400×240 mm;Weight: 21 kg; Water/gas connections: 1/2” – 3/4″ Ø; RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO ACQUAFUN 14 LPG WATER HEATER: Open Chamber water heater specifically dedicated to the production of hot water only. Technical specifications Product code: 20019747 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: profileL Characteristics of heating/DHW operation: Useful power - firebox: 23.7 - 27.2 kW Efficiency at max power: 87.1% Open room, natural draught Min/normal/max pressure bar 0.2/2/10 Camppreliev selector max 40C: 6.7£13.6 l/min Domestic hot water production: 14 l/min Dimensions (hxlxp) mm 650 x 363 x 245 ; 12.6 kgs Power supply: LPG Features list WATERFUN Methane gas LPG Open Room Automatic battery start Acquafun Open Chamber water heater for quick and easy installation without electrical connections thanks to battery power supply. It is available in two models: 11 and 14 litres. Characteristics: Automatic ignition by battery (1.5 Volt). Get rid of tension problems. The continuous flame modulation allows the selected temperature to be kept constant as the pressure and water flow vary, optimizing the combination with mechanical and thermostatic mixers. Economizer device to reduce gas consumption. Supplied battery (1.5 Volt €«¦ size C €«¦ half torch). No mains connection required. The economizer chokes the maximum power by 50% to adapt it to the various installations. Thanks to its particularly compact dimensions, it can be installed in homes with particularly limited spaces. ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of "Energy related Products" and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through a eco-design ("eco-design"). The field of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products for the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitory period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The energy labeling of products for heating domestic hot water production The regulations issued require that all products intended for heating and the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new mod to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as products with 4 - Heat Pump Water Heaters, as well as those on air conditioners, the efficiency data reported for the average climatic range. In addition to the product energy labels, European regulations have also provided for the creation of a system label in the case of creating a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); this faculty was also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Model: AcquaFun2 LN 11 Product code : 20149827 Methane gas Energy efficiency Sanitary energy efficiency class: A Sanitary load profile : M Sanitary energy efficiency (ηwh) : 77.2% Daily gas consumption : 8.084 kW/h Annual gas consumption : 6 GJ Emissions of nitrogen oxides: 46 mg/kWh Characteristics Typology : Open chamber Draft Natural draft Ignition : 2 x 1.5V batteries Flame control : By ionization Flame modulation : Continue Hot water production Δt=30° : 9.3 litres/min Nominal heat input : 21.0 ~ 22.0 kW Rated heat output: 18.33~19.43kW Performance Water Withdrawal range with selector at minimum : from 2.5 to 5.5 litres/min Withdrawal range with selector at maximum : from 2.5 to 11 litres/min Water temperature rise with selector at minimum : 50°C Water temperature rise with selector at maximum : 25°C Minimum ~ normal ~ maximum pressure : 0.2 ~ 2.0 ~ 10.0 bar Water connections: 12.70 mm 1/2” Ø DHW temperature selection range: 35° ~ 60° C Performance Gases Nominal supply pressure G20,G30,G31 : 20/28 ~ 30/37 mbar Gas connections: 12.70 mm 1/2” Ø Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Electrical protection degree : IPX4D Dimensions and weight Dimensions (HxWxD): 675x350x230 mm Net weight : 12.0 Kg Riello ACQUAFUN 2 LN water heater The new Low NOx open chamber water heater Riello presents Acquafun 2 LN, the new instantaneous open chamber water heater, fully signed by Riello both in terms of design and manufacturing. Product that is part of the new offer of low NOx emission products able to offer maximum sanitary comfort in compliance with the recent European regulations for the reduction of NOx emissions. The new range is available in two sizes, 11 and 14 litres, available in both CNG and LPG versions, with dedicated codes. Acquafun 2 LN, completely renewed in the aesthetic and planning design, is ideal for installation in any living context, characteristics which, together with the simplicity of maintenance and performance for the end user, distinguish Acquafun 2 as an ideal solution for the production of domestic hot water for residential use. Latest generation burner with reduced Nox emissions The innovative water-cooled hyperstoichiometric type burner allows a significant reduction in the polluting values ​​of carbon monoxide and nitrogen produced by combustion, in compliance with the demanding requirements of EU Regulation 814/2013 which requires emissions equal to or lower than 56 mg/kWh The high heat output , together with the wide flame modulation, up to 45% of the nominal output, complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort . Simple and intuitive command interface Simple and intuitive backlit display with visualization of water temperature in °C, flame presence and battery charge level Three command buttons allow you to manage all the water heater functions Ease of use for the user due to the keys with symbols dedicated to the single user functions Immediate availability of hot water The innovative electronic gas valve combined with the pressure regulator allows the immediate delivery of the power in delivery, thanks to a controlled management of the flowmeter and the NTC temperature probe. The new electronics allow simplified maintenance and high-level performance. 1. NTC temperature probe 2. Limit thermostat with reset from display 3. Exchanger 4. Cooled burner 5. Electronic gas valve with pressure regulator 6. Flow restrictor 7. Flowmeter 8. Temperature regulator EAF Cold water inlet UAC Hot water outlet The new Acquafun2 LN range is characterized by the rapid achievement of the desired hot water temperature, offering optimal comfort. Product guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Mini 17 LN Low NOx sealed chamber water heater complete with LPG fume exhaust kit Typology: Forced Draft Sealed Chamber; Model: Mini 17 LN; Sanitary energy efficiency class: A; Sanitary load profile: L; Power supply: LPG Daily gas consumption: 15,175 kW/h; Sanitary Energy Efficiency: 80.2%; Annual gas consumption: 11 GJ; Emissions of nitrogen oxides (Nox): 33 mg/kWh; Hot water production Δt=30°: 13.3 litres/min; Nominal heat input: 30.0 kW; Nominal thermal power: 27.90 kW; Min/max withdrawal range: 2.5/13 litres/min; Min/max pressure: 0.2/10.0 bar; DHW temperature selection range: 36-65°C ; Supply voltage: 230/50V/Hz; Electrical protection degree: IPX4D; Dimensions: (H×W×D) 640×400×240 mm;Weight: 21 kg; Water/gas connections: 1/2” – 3/4″ Ø; RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less