Wilo multistage centrifugal electric pump single-phase normally suction version HIMULTI 3-43/1/5/230 4189522 General characteristics Brand: Wilo Model: HIMULTI 3-43/1/5/230 Code: 4189522 Data sheet Description Field of applications: Residential and commercial applications Water pressurization Irrigation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Grundfos submersible single impeller single phase electric pump for sewage in stainless steel ap 50b.50.11.a1 96004598 General characteristics Brand: Grundfos Model: ap 50b.50.11.a1 Code: 96004598 Data sheet Max flow rate: 7.78 l/s Max head: 14 m Impeller type: VORTEX Max. Particle: 50mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 1.75 kW 1-phase motor type: PSC Rated power - P2 : 1.21 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Rated Current: 8A Cos phi - power factor: 0.95 Rated Drive Speed: 2760rpm Capacitance capacity - running: 20 µF/400 V Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: CONTACT Thermal protection: internal Electric cable length: 5 m Cable plug type: SCHUKO Checks Level switch: Float Other Net weight: 11kg Gross weight: 12.5kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Model : PRN 0.50M Single-phase motor 230V ±10% 50Hz Power: 0.37kW (0.5HP) Capacitor capacity: 10mF Operating range: flow rate up to 35 l/min (2.1 m3/h) with heads up to 37 metres. Maximum working pressure: 6 bar (600 kPa) Maximum liquid temperature: 80°C IE2 and IE3 energy efficient motors starting from 0.75kW Noise level: <70 db(A) Insulation class F Degree of protection IP44 Pump body and support in cast iron Impeller in brass EBARA Over 20 years of experience in the construction of electric pumps for the industrial and domestic market with a multinational company with over one hundred years of experience behind it. It is a philosophy that unites three inseparable concepts: quality , avant-garde and life . Each EBARA product is designed and built to achieve the highest levels of functionality, guaranteed by a rigorous and complete quality control program which involves the entire manufacturing cycle. EBARA centrifugal electric pumps, covered by several international patents, represent the future in fluid pumping. The stainless steel electric pumps are made through a completely robotic process which allows the optimization of the use of materials, rapid changes of the production line, high levels of standardization, quality control in line. Thanks to the construction technique acquired from the Japanese parent company, the EBARA stainless steel electric pumps are distinguished by their unmistakable hydraulic design. Two production plants , in Veneto (Brendola) and in Trentino (Cles). The Cles production line, fully automated and robotic, is designed to maximize the use of raw materials, allowing the creation of products at the highest levels of standardization and efficiency and minimizing energy requirements. The manufacturing processes are carefully structured to optimize the quality and reliability of the products. The experience accumulated over many years of activity, the ISO 9001 certification and the flexible manufacturing process, supported by advanced information systems (CAD, CAM, SAP), are synonymous with Quality: of the product, of the service, of the brand PRA-PRN Peripheral electric pumps in cast iron Applications: Domestic uses Boiler supply Autoclave groups Technical features: Silent Practice Easily transportable Also available in the nickel-plated version (model PRN 0.50) Pump technical data: Maximum working pressure: - 6 bars for PRA 0.50 - 7.5 bar for PRA 0.80 - 12 bars for the rest of the range Maximum liquid temperature: 80°C G1 delivery connection G1 suction connection Engine technical data: IE2 and IE3 energy efficient motors starting from 0.75kW 2 pole asynchronous motor Insulation class F Degree of protection IP44 Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ±10% 50Hz Permanently inserted capacitor and built-in automatic reset thermo-amperometric protection for the single-phase motor Protection by the user for the three-phase version Materials: Pump body and support in cast iron Shaft in AVZ for the PRA 0.50 model, in AISI 303 (part in contact with the liquid) for the rest of the range Impeller in brass Mechanical seal in Carbon/Ceramic/NBR Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: FEKA VS 1200 MA single-phase Power supply: 1 x 230V~50Hz Power: 1.2kW (1.6HP) Capacitor capacity: 30mF Operating range: flow rate up to 400 l/min (24 m3/h) with heads up to 14 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Electric Panel Dab Control Box 4" 2 cod 108003290 Data sheet Brand: Dab Code: 108003290 Model: Control Box 4" 2 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wilo submersible electric pump for mobile submerged installation Drain TM 32/8-10M 4048411 General characteristics Brand: Wilo Model: Drain TM 32/8-10M Code: 4048411 Data sheet Hydraulic data Maximum working pressure PN: 2 bar Impeller structure type: Open multi-channel impeller Free spherical passage of the hydraulic system: 10 mm Max. immersion depth: 3 m Fluid temperature min. Tmin: 3 °C max temperature temperature Tmax: 35 °C ambient temperature min. Tmin: 3 °C ambient temperature max. Tmax: 35°C Engine data Mains power supply: 1~230V, 50Hz Voltage tolerance: ±10% Power factor cos f: 0.98 P2 motor rated power: 0.37 kW Power consumption P1 max: 450 W IN Rated Current: 2.2A Inrush current I: 4.8A Connection Type: Direct Online (DOL) Nominal speed n: 2900 1/min frequency max. of starts: t 50 1/h Insulation class: F Degree of protection: IP68 Operating mode (immersed): S1 Mode of operation (non-submerged): S3-25% Cable Connection cable length: 10 m Cable type: H07RN-F Cable section: 3G1 mm² Mains plug: Schuko Connection cable type: Non-detachable Equipment/function Float Switch: No Type of explosion protection: - Motor protector: Bimetal Materials Pump body: PP-GF30 Impeller: PPE/PS-GF20 Pump side gasket material: BQ1PFF Engine side gasket material: NBR Seal material: NBR Motor material: Stainless steel Assembly fee Pipe connection on the pressure side : G 1¼ Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Grundfos submersible single-impeller three-phase electric pump for sewage in stainless steel ap 50b.50.15.3 96004609 WITHOUT SHUKO PLUG AND WITHOUT FLOAT General characteristics Brand: Grundfos Model: ap 50b.50.15.3 Code: 96004609 Data sheet Max flow rate: 8.61 l/s Max head: 17 m Impeller type: VORTEX Max. Particle: 50mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 2.15 kW Rated power - P2 : 1.5 kW Network frequency: 50Hz Rated Voltage: 3 x 400V Rated Current: 3.7A Cos phi - power factor: 0.85 Rated Drive Speed: 2785rpm Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: NONE Thermal protection: external Electric cable length: 5 m Cable plug type: NONE Other Net weight: 11.9kg Gross weight: 13.9kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Wilo submersible electric pump for mobile submersible installation for domestic waste water Rexa MINI3 V04.09/M05-523/A-5m 3094005 General characteristics Brand: Wilo Model: Rexa MINI3 V04.09/M05-523/A-5m Code: 3094005 Technical data sheet Description Submersible pump for mobile submersible installation, automatic operation with integrated float switch (depending on model). Field of application: Residential applications Drainage Wastewater lifting Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Wilo multistage monobloc electric pump with 5" stainless steel submersible motor TWI5 305 EM 4144948 General characteristics Brand: Wilo Model: TWI5 305 EM Code: 4144948 Technical data sheet Description Monobloc multistage pump with 5” submersible motor in stainless steel for vertical or horizontal installation. Field of application Residential and commercial applications Water pressurization Irrigation Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model Self-priming centrifugal electric pump Dab Model DP 151 T Energy efficiency Operating range: up to 4.3 m3/h. Pumped liquid: clean, free from solid or abrasive substances, not viscous, non-aggressive, non-crystallised and chemically neutral, close to the water features. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Installation: fixed in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220-240V / 50Hz three-phase 230-400V / 50Hz APPLICATIONS Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector (optional) to be introduced in wells of 4" or diameter greater. Used for the water supply of farmhouses and small agriculture. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump: Body and motor support in cast iron. Technopolymer impeller and diffuser. Stainless steel shim ring. Mechanical seal in carbon/ceramic. Ejector: Cast iron body. Venturi tube in technopolymer A and brass nozzle. The ejector is available in three models (E 20 - E 25 - E 30) depending on the performance required. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Rotor mounted on greased-for-life and oversized ball bearings. Built-in thermo-amperometric protection and capacitor permanently inserted in single-phase motors. For the protection of the three-phase motor it is recommended to use a motor protection switch in compliance with the norms. Construction according to CEI 61-69 (EN 60335-2-41) standards. Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector to be introduced in wells of 4” or greater diameter. Used for the water supply of farmhouses and small agriculture. Operating range: up to 4.3 m3/h. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Self-priming: up to 27 metres. Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JET 151 M single-phase Code: 102160062 Power supply: 1 x 220-240V~50Hz Power: 1.1kW (1.5HP) Capacitor capacity: 31.5mF Operating range: flow rate up to 75 l/min (4.5 m3/h) with heads up to 61 metres. Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 8 bar (800 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal board). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

PEDROLLO multi-impeller centrifugal electric pump mod. 4CPM 80 single-phase 0.75 HP SILENT Technical features: Single-phase 230V - 50 Hz motor with thermal overload protector incorporated in the winding Power 0.60kW (0.85HP) Capacitor capacity 14mF Flow rate: up to 80 l/min (4.8 m³/h) Head: up to 52 m Pump body: cast iron equipped with ISO 228/1 threaded ports. Lid: cast iron Ejector group: Noryl GFN2V Impellers: brass Motor shaft: stainless steel Insulation: class F Protection: IP X4 Liquid type: clean water Uses: domestic, civil Uses: water supply, pressure boosting systems, irrigation Typology: surface Family: multi-impellers Liquid temperature from -10 °C up to +40 °C Ambient temperature up to +40 °C Manometric suction height up to 7 m Max pressure in the pump body 6 bar Continuous duty S1 General characteristics: Recommended for the distribution of clean water combined with small or medium autoclave tanks and for the irrigation of orchards and gardens. The installation must be carried out in closed places or in any case protected from bad weather Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less