Ebara horizontal silent multistage centrifugal electric pump with single-phase cast iron body COMPACT AM/12 1480050000 General characteristics Brand: Ebara Model: COMPACT AM/12 Code: 1480050000 Data sheet Maximum flow rate, m3/h: 4.8 Maximum pumping height: 74 m Maximum working pressure: 7.4 bar Maximum liquid temperature: 40°C Suction diameter: G1 Outlet diameter: G1 Electrical connection: 230V, single phase Motor power: 0.9kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: Cast iron Motor type: 2 poles Description APPLICATIONS • Domestic pressurization • Pressure increases in general • Small garden irrigation • Vehicle washing • Movement of clean water TECHNICAL FEATURES • Particularly silent • Light and easy to handle PUMP TECHNICAL DATA • Maximum working pressure: 10 bar • Maximum liquid temperature: 40°C • G1 suction connection for COMPACT A, G1¼ for COMPACT B • G1 delivery connection ENGINE TECHNICAL DATA • IE2 and IE3 high efficiency motors starting from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ± 10% 50Hz • Permanently inserted capacitor and protection built-in thermo-amperometric sensor with automatic reset for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body and support in cast iron • External jacket in AISI 304 • Impeller and diffuser in PPE+PS reinforced with glass fibers • Stages in PPE+PS reinforced with glass fibres/PTFE • Shaft in AISI 416 • Mechanical seal in Ceramic/Carbon/NBR Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Self-priming cast iron electric pump Ebara Mod. Aga M 2.0 Single-phase motor Single-phase motor 230V ±10% 50Hz Flow rate up to 100 l/min (6 m³/h) Head up to 59 m Maximum operating pressure: - 6 bar for AGA 0.60-0.75-1.00 - 10 bars for the rest of the range Maximum liquid temperature: 45°C Maximum suction depth: 8 m High energy efficiency IE2 and IE3 motors starting from 0.75kW Insulation class F Degree of protection IP44 Cast iron pump body Impeller in PPE+PS reinforced with glass fibres for AGA 0.60-0.75- 1.00, in brass for the rest of the range AGA The AGA - AGC electric pumps are self-priming cast iron electric pumps equipped with a Venturi group (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to their low weight. The pump body is in cast iron for all models. Among their peculiarities is that of having the shaft in AISI 303 steel (for the part in contact with the liquid). The available impellers are in PPE + PS reinforced with glass fibres for AGA 0.60 – 0.75 – 1.00 and in brass for the rest of the range. The mechanical seal is in Ceramic/Carbon/NBR. The 2-pole asynchronous self-ventilated motors are high energy efficiency IE3 starting from 0.75 kW. PUMP TECHNICAL DATA Head from 16.5 to 68 m Flow rate from 0.3 to 9.6 m3/h Maximum operating pressure: - 6 bar for AGA 0.60 - 0.75 - 1.00 - 10 bars for the rest of the range Maximum liquid temperature 45°C Maximum suction depth 8 m Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara Cast Iron Self Priming Electric Pump Mod. Aga M 1.5 Single Phase Motor Single-phase motor 230V ±10% 50Hz Flow rate up to 100 l/min (6 m³/h) Head up to 59 m Maximum working pressure: - 6 bar for AGA 0.60-0.75-1.00 - 10 bar for the rest of the range Maximum liquid temperature: 45°C Maximum suction depth: 8 m IE2 and IE3 energy efficient motors starting from 0.75kW Insulation class F Degree of protection IP44 Pump body in cast iron Impeller in PPE+PS reinforced with glass fibers for AGA 0.60-0.75-1.00, in brass for the rest of the range AG extension The AGA - AGC electric pumps are self-priming cast iron electric pumps equipped with a Venturi group (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to their low weight. The pump body is in cast iron for all models. Among their peculiarities is that of having the shaft in AISI 303 steel (for the part in contact with the liquid). The impellers available are in PPE + PS reinforced with glass fibers for AGA 0.60 – 0.75 – 1.00 and in brass for the rest of the range. The mechanical seal is in Ceramic/Carbon/NBR. The self-ventilated 2-pole asynchronous motors have high energy efficiency IE3 starting from 0.75 kW. PUMP TECHNICAL DATA Head from 16.5 to 68 m Flow rate from 0.3 to 9.6 m3/h Maximum working pressure: - 6 bar for AGA 0.60 - 0.75 - 1.00 - 10 bar for the rest of the range Maximum liquid temperature 45°C Maximum suction depth 8 m Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : PRN 0.50M Single-phase motor 230V ±10% 50Hz Power: 0.37kW (0.5HP) Capacitor capacity: 10mF Operating range: flow rate up to 35 l/min (2.1 m3/h) with heads up to 37 metres. Maximum working pressure: 6 bar (600 kPa) Maximum liquid temperature: 80°C IE2 and IE3 energy efficient motors starting from 0.75kW Noise level: <70 db(A) Insulation class F Degree of protection IP44 Pump body and support in cast iron Impeller in brass EBARA Over 20 years of experience in the construction of electric pumps for the industrial and domestic market with a multinational company with over one hundred years of experience behind it. It is a philosophy that unites three inseparable concepts: quality , avant-garde and life . Each EBARA product is designed and built to achieve the highest levels of functionality, guaranteed by a rigorous and complete quality control program which involves the entire manufacturing cycle. EBARA centrifugal electric pumps, covered by several international patents, represent the future in fluid pumping. The stainless steel electric pumps are made through a completely robotic process which allows the optimization of the use of materials, rapid changes of the production line, high levels of standardization, quality control in line. Thanks to the construction technique acquired from the Japanese parent company, the EBARA stainless steel electric pumps are distinguished by their unmistakable hydraulic design. Two production plants , in Veneto (Brendola) and in Trentino (Cles). The Cles production line, fully automated and robotic, is designed to maximize the use of raw materials, allowing the creation of products at the highest levels of standardization and efficiency and minimizing energy requirements. The manufacturing processes are carefully structured to optimize the quality and reliability of the products. The experience accumulated over many years of activity, the ISO 9001 certification and the flexible manufacturing process, supported by advanced information systems (CAD, CAM, SAP), are synonymous with Quality: of the product, of the service, of the brand PRA-PRN Peripheral electric pumps in cast iron Applications: Domestic uses Boiler supply Autoclave groups Technical features: Silent Practice Easily transportable Also available in the nickel-plated version (model PRN 0.50) Pump technical data: Maximum working pressure: - 6 bars for PRA 0.50 - 7.5 bar for PRA 0.80 - 12 bars for the rest of the range Maximum liquid temperature: 80°C G1 delivery connection G1 suction connection Engine technical data: IE2 and IE3 energy efficient motors starting from 0.75kW 2 pole asynchronous motor Insulation class F Degree of protection IP44 Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ±10% 50Hz Permanently inserted capacitor and built-in automatic reset thermo-amperometric protection for the single-phase motor Protection by the user for the three-phase version Materials: Pump body and support in cast iron Shaft in AVZ for the PRA 0.50 model, in AISI 303 (part in contact with the liquid) for the rest of the range Impeller in brass Mechanical seal in Carbon/Ceramic/NBR Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model : JESXM 8 HP power 0.8 KW: 0.6 Max flow rate at 37mt 5 l/min, 0.3 m3/h Max pressure: 6 Bars Max temperature: 45°C Suction depth: 8m Poles: 2 Insulation class: F Degree of protection: IP54 Voltage 230V Pump body: AISI 304 stainless steel Impeller: PPE+PS with glass fibers Shaft: AISI 303 stainless steel Mechanical seal: Ceramic/carbon/NBR Engine Mount: Aluminum Impeller in glass fiber reinforced PPO EBARA Over 20 years of experience in the construction of electric pumps for the industrial and domestic market with a multinational company with over one hundred years of experience behind it. It is a philosophy that unites three inseparable concepts: quality , avant-garde and life . Each EBARA product is designed and built to achieve the highest levels of functionality, guaranteed by a rigorous and complete quality control program which involves the entire manufacturing cycle. EBARA centrifugal electric pumps, covered by several international patents, represent the future in fluid pumping. The stainless steel electric pumps are made through a completely robotic process which allows the optimization of the use of materials, rapid changes of the production line, high levels of standardization, quality control in line. Thanks to the construction technique acquired from the Japanese parent company, the EBARA stainless steel electric pumps are distinguished by their unmistakable hydraulic design. Two production plants , in Veneto (Brendola) and in Trentino (Cles). The Cles production line, fully automated and robotic, is designed to maximize the use of raw materials, allowing the creation of products at the highest levels of standardization and efficiency and minimizing energy requirements. The manufacturing processes are carefully structured to optimize the quality and reliability of the products. The experience accumulated over many years of activity, the ISO 9001 certification and the flexible manufacturing process, supported by advanced information systems (CAD, CAM, SAP), are synonymous with Quality: of the product, of the service, of the brand. JESX-JEX Self-priming electric pumps in AISI 304 stainless steel Applications: Drinking water supply Domestic pressurization Small garden irrigation Emptying tanks and pools Movement of clean water in general Technical features: Practice Easily transportable Light Pump technical data: Maximum working pressure: 6 bar Maximum liquid temperature: 45°C Maximum suction depth: 8 m Suction port G1 for JESX, G1¼ for JEX G1 delivery connection Engine technical data: IE2 and IE3 energy efficient motors starting from 0.75kW Self-ventilated 2-pole asynchronous motor Insulation class F Degree of protection IP54 (on request IP55) Single-phase voltage 230V ±10% 50Hz, three-phase voltage 230/400V ±10% 50Hz Permanently inserted capacitor and built-in automatic reset thermo-amperometric protection for the single-phase motor Protection by the user for the three-phase version Materials: Pump body and seal holder disc in AISI 304 Shaft in AISI 303 (part in contact with the liquid) Impeller in AISI 304 for JEX, in PPE+PS reinforced with glass fibers for JESX Venturi unit plus glass fiber reinforced PPO diffuser Mechanical seal in Ceramic/Carbon/NBR Aluminum support and motor case Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less