Wilo submersible electric pump for gray domestic wastewater Initial WASTE 14-9 4168022 General characteristics Brand: Wilo Model: Initial WASTE 14-9 Code: 4168022 Data sheet Hydraulic data Maximum working pressure PN: 3 bar Delivery port: Rp 1½ Free spherical passage of the hydraulic system: 20 mm Impeller Structure Type:e Impeller Max. immersion depth: 5 m Hopt optimal head: 635.9 kPa Optimal delivery Qopt :10.27 m³/h Fluid temperature min. Tmin: 5 °C max temperature temperature Tmax: 35 °C ambient temperature min. Tmin: 1 °C ambient temperature max. Tmax: 35°C Engine data Mains power supply: 1~230V, 50Hz Voltage tolerance: ±10% P2 motor rated power: 0.65 kW Power consumption P1 max: 900 W IN Rated Current: 4.5A Inrush current I: 0A Rated speed n: 2800 1/min Connection Type: Direct Online (DOL) Number of poles: 2 frequency max. of starts t: 60 1/h Insulation class: F Motor protection degree: IP68 Operating mode (immersed): S1 Mode of operation (non-submerged): – Cable Connection cable length: 10 m Cable type: H07RN-F Cable section: 3G1 mm² Mains plug: Schuko Connection cable type: Non-detachable Equipment/function Float Switch: No Crusher: no Type of explosion protection: - Motor protector: PTO Engine leak check: no Sealing chamber leak check: no Leak chamber tightness check: no Materials Pump body: PP Impeller: PA-GF30 Shaft: Stainless steel Shaft seal: BQ1PFF Pump side gasket material: BQ1PFF Engine side gasket material: BQ1PFF Seal material: NBR Motor material: Stainless steel Assembly fee Hose connection on the suction side: - Pipe connection on the pressure side: Rp 1½ Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wilo inverter water booster set for residential and commercial applications Isar BOOST5-E-5 4243584 General characteristics Brand: Wilo Model: Isar BOOST5-E-5 Code: 4243584 Data sheet Hydraulic data max temperature temperature Tmax: 40 °C Fluid temperature min. Tmin: 0 °C ambient temperature min. Tmin: 0 °C ambient temperature max. Tmax: 40°C Engine data P2 motor rated power: 1.1 kW IN Rated Current: 10A Rated speed n: 3600 1/min Insulation class: F Motor protection degree: IPX4 Materials Pump body: PA66-GF50 Impeller: PPE/PS-GF20 Shaft: Stainless steel Shaft seal: BXPFF Assembly fee Hose connection on the suction side: G 1 Pipe connection on the pressure side: G 1 Description Application field for inverter water supply system: Residential applications Commercial applications Water pressurization Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara horizontal silent multistage centrifugal electric pump with single-phase cast iron body COMPACT AM/12 1480050000 General characteristics Brand: Ebara Model: COMPACT AM/12 Code: 1480050000 Data sheet Maximum flow rate, m3/h: 4.8 Maximum pumping height: 74 m Maximum working pressure: 7.4 bar Maximum liquid temperature: 40°C Suction diameter: G1 Outlet diameter: G1 Electrical connection: 230V, single phase Motor power: 0.9kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: Cast iron Motor type: 2 poles Description APPLICATIONS • Domestic pressurization • Pressure increases in general • Small garden irrigation • Vehicle washing • Movement of clean water TECHNICAL FEATURES • Particularly silent • Light and easy to handle PUMP TECHNICAL DATA • Maximum working pressure: 10 bar • Maximum liquid temperature: 40°C • G1 suction connection for COMPACT A, G1¼ for COMPACT B • G1 delivery connection ENGINE TECHNICAL DATA • IE2 and IE3 high efficiency motors starting from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ± 10% 50Hz • Permanently inserted capacitor and protection built-in thermo-amperometric sensor with automatic reset for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body and support in cast iron • External jacket in AISI 304 • Impeller and diffuser in PPE+PS reinforced with glass fibers • Stages in PPE+PS reinforced with glass fibres/PTFE • Shaft in AISI 416 • Mechanical seal in Ceramic/Carbon/NBR Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wilo single-phase multistage centrifugal electric pump self-priming version HIMULTI 3-45 P/1/5/230 4194284 General characteristics Brand: Wilo Model: HIMULTI 3-45 P/1/5/230 Code: 4194284 Data sheet Description Field of applications: Residential and commercial applications Water pressurization Irrigation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Water booster set with pressure switches Wilo single-phase P2 0.75 kW COE-2MHIL305-EM/BC 2982787 General characteristics Brand: Wilo Model: COE-2MHIL305-EM/BC Code: 2982787 Data sheet Hydraulic data Supply pressure: 6 bar operating pressure max. p: 10 bars Pressure-side pipe connection DNd: G 2 Pipe connection on the suction side DNs: G 2 Number of pumps: 2 Number of standby pumps: 0 Number of service pumps: 2 Fluid temperature min. Tmin: 5 °C max temperature temperature Tmax: 55 °C ambient temperature min. Tmin: 0 °C ambient temperature max. Tmax: 40°C Engine data Mains power supply: 1~230V, 50Hz Voltage tolerance: ±10% P2 motor rated power: 0.75 kW IN Rated Current: 5.1A Nominal speed n: 2900 1/min Insulation class: F Degree of protection: X4 Engine efficiency ?m 50% ?M 50%: 57.7% Engine efficiency ?m 75% ?M 75%: 62.8% Engine efficiency ?m 100% ?M 100%: 62.3% Materials Pump body: Cast iron Impeller: PPE/PS-GF30 Shaft: Stainless steel Mechanical seal: Q1BE3GG Gasket material: EPDM Manifold material: 1.0026, zinc plated Description Water supply system with 2 fixed performance high head centrifugal pumps, mounted in parallel and arranged horizontally, in the version with ventilated motor of the MHIL series, with normal suction. Ready for connection with stainless steel collectors, mounted on plinth, equipped with a BC command device. For fully automatic water supply and pressure boosting in residential buildings and small businesses. For pumping drinking water and clean industrial water, as well as other aqueous solutions which do not chemically or mechanically attack the materials used and which do not contain abrasive or fibrous substances. Product specificity/advantages • High operational safety thanks to the system with two horizontal MHIL multistage pumps with stainless steel hydraulic system • High-efficiency EC motor with IE3 class for three-phase motors from 0.75 kW and above • Drinking water approval (DHW) for pumps with wetted parts made of stainless steel • Easy to use thanks to the Basic Control command station with all the necessary functions Equipment/function For each system, two pumps of the MHIL 3 to MHIL 5 series with standardized motor IE3 for 3~ motors and IE1 for 1~ motors Wetted parts are corrosion resistant Base in galvanized steel Galvanized steel manifolds Shut-off valve on the suction and discharge side of each pump Check valve on the discharge side of each pump Pressure switch, discharge side Pressure gauge, discharge side Optional protection against water shortage, suction side Automatic pump control specific for the management of fixed performance pumps with the control unit BasicControl , housed in a plastic case. The electromechanical technology used guarantees the functions required for operation. Start/stop of pumps by pressure switch; protection against lack of water, motor protection switch, cyclical pump switching, delay in switching off the pumps. An LED indicator provides information on any alarms and on the operation of the pumps and has an operating mode selector. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL DATA Operating range: from 1 to 14.5 m3 /h Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +35°C (domestic use) +40°C (other uses) Maximum ambient temperature: +40°C Maximum working pressure: PN10 Special executions on request: contact the sales network Degree of protection: IP44 Standard IE2 motors from 0.75 kW up to 5.5 kW - IE3 ≥ 7.5 kW APPLICATIONS Water lifting units particularly suitable for domestic use, small systems for civil, agricultural or industrial use. The electric pumps used, EUROINOX multistage centrifugal pumps, have the characteristic of functioning even with the presence of air, gas or small quantities of sand in the water. They are indispensable when drawing from an artesian well and when there are suction difficulties. They stand out for their absolute reliability, simplicity of operation and no need for maintenance. The units are supplied as standard with tanks and with an air feeder connection. CONSTRUCTION FEATURES HYDRAULIC PART 2 EUROINOX multistage centrifugal electric pumps. Tropicalised galvanized sheet metal base complete with 4 rubber anti-vibration feet. Threaded suction and delivery manifolds in AISI 304 stainless steel. 2 membrane tanks. Ball valves with union on the suction and delivery sides of each single pump. Check valve in the inlet of each pump. 1 1/4” connections for air feeder on suction of each pump. 2 female caps in stainless steel for closing the manifolds. 1 pressure transmitter on the delivery manifold (pressure detection). ELECTRICAL PART Supplied in a self-extinguishing thermoplastic material box, with an IP55 degree of protection, the panel protects the electric pumps from anomalous conditions such as: overloads and overtemperature with automatic reset, short circuits with fuses (Plus model only), pump overcurrents (amperometric protection) abnormal voltages, dry running, rapid starts, pressure sensor failure or inconsistent external protection commands. PANEL FRONT COMPONENTS: Main switch with padlockable door lock. Operation selection buttons AUT - OFF - MAN. Alarm RESET buttons. Panel front display. Run, block, alarm warning lights. COMPONENTS INSIDE THE PANEL: Electronic command and control card with protection fuses and contactors. Power supply connection terminals (single-phase or three-phase). Connection terminals to dry running or overpressure pressure switches (Optional). NO contacts for alarm signals. Function selection mini dip switch (pressure transmitter or pressure switches, standard or supplementary tanks). The electrical panel is set up for the connection of: Pressure switch kit or float for protection against dry running (*) Pressure switch kit for overpressure (*) (*) to be requested separately as an Optional The units are supplied complete with sturdy packaging box with wooden pallet and installation / maintenance instructions with wiring diagram Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Dab EvoPlus B 120/220 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed ​​and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values ​​are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SFA pump for intensive use Model WATERSAN 20 Code 0050394 WS20 General characteristics Brand: Sfa Code: 0050394 WS20 Model: WATERSAN 20 Main feature: Pump for intensive use allows you to connect the kitchen, a complete bathroom (except toilet) and the laundry room. Connect clear water drain: sink, tub, shower, bidet, washing machine/dishwasher. Data sheet Horizontal head: 100 m Vertical head: 10 m Exhaust pipe diameter: 32 mm Dimensions: 534L x 222D x 375H / 9.00kg Dimensions   Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wilo multistage centrifugal electric pump normally suction version HIMULTI 3-23/1/5/230 4189516 General characteristics Brand: Wilo Model: HIMULTI 3-23/1/5/230 Code: 4189516 Data sheet Description Field of applications: Residential and commercial applications Water pressurization Irrigation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL FEATURES Model: 2K35/40M single-phase Code: 500124020 Power supply: 1 x 230V ~ 50Hz Power: 0.75kW x 2 (1HP x 2) Max pressure obtainable : 4.2 bar Pressure switch setting: 2.2÷3.3 bar 2K Lifting unit with 2 double impeller pumps k Lifting unit with 2 K-type double-impeller centrifugal pumps complete with base, suction and delivery manifold, 2 diaphragm tanks. Particularly suitable for small and medium-sized systems for civil use. The use of K double-impeller centrifugal electric pumps characterizes a high power-pressure ratio, ensuring high efficiency and extremely low noise. They are distinguished by their constructive sturdiness, compactness and absolute reliability. CHARACTERISTICS: ELECTRICAL CABINET Automatic reverser, for exchanging the starting order of the pumps at each start-up. General switch . Possibility of inserting a float or pressure switch for protection against dry running. Low voltage auxiliary circuit complete with transformer and protection fuses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL FEATURES Model: 2 K45/50 T three-phase Code: 60179955 Power supply: 1 x 230V ~ 50Hz Power: 0.75kW x 2 (1HP x 2) Max pressure obtainable : 4.2 bar Pressure switch setting: 2.2÷3.3 bar 2K Lifting unit with 2 double impeller pumps k Lifting unit with 2 K-type double-impeller centrifugal pumps complete with base, suction and delivery manifold, 2 diaphragm tanks. Particularly suitable for small and medium-sized systems for civil use. The use of K double-impeller centrifugal electric pumps characterizes a high power-pressure ratio, ensuring high efficiency and extremely low noise. They are distinguished by their constructive sturdiness, compactness and absolute reliability. CHARACTERISTICS: ELECTRICAL CABINET Automatic reverser, for exchanging the starting order of the pumps at each start-up. General switch . Possibility of inserting a float or pressure switch for protection against dry running. Low voltage auxiliary circuit complete with transformer and protection fuses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : FEKA VS 12000 T-NA Power supply : 3 x 400V ~ 50Hz Power : 1.2 kW (1.6 HP) Operating range: from 0 to 32 m3/h with head up to 14 metres Pumped liquid: sewage and used water in general, however non-aggressive Free Passage: 50 mm Liquid Temperature Range : - from 0°C to +35°C for domestic use, - from 0°C to +50°C for other uses Maximum Ambient Temperature for Operation of the Pump with the Motor Surfaced: +40° C Maximum Immersion Depth : 7 meters Motor Protection Degree: IP 68 Insulation class : F Installation : Fixed or Portable, Vertical FEKA VS Submersible Pumps Applications Submersible centrifugal pump in stainless steel with liquid vortex impeller, in precision cast steel, suitable for lifting sewage water and waste water in general, containing solid bodies with maximum dimensions up to 50 mm Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side Construction Characteristics of the Engine Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 , Max starts/hour: 20. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less