Technical features Model : Euro 40 /50 M single-phase Code : 102970080 Number of impellers : 4 Power : 0.75 kW (1 HP) Capacitor capacity : 25mF Operating range : Flow rate up to 80 l/min (4.8 m3/h) with heads up to 42.5 metres. Maximum working pressure : 8 bar (800 kPa) General characteristics Multistage centrifugal EURO electric pump, pump body in cast iron. Horizontal axis multistage centrifugal pump, characterized by extremely silent operation, suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Advantages Pump body in 200 UNI ISO 185 cast iron engine mount in die-cast aluminium seal holder cover in AISI 304 steel Mechanical seal in carbon/ceramic Motor shaft in AISI 304 steel Impellers, diffuser bodies and diffusers in technopolymer Stainless steel shim rings Features of the series Motor protection degree : IP 44 Degree of protection of the terminal block: IP 55 Insulation class : F Operating range : From 10 to 120 l/min with head up to 72 metres Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water Liquid temperature range : From 0°C to +35°C for domestic use (EN 60335-2-41). From o°C to +40°C for other uses Maximum working pressure : 8 bar (800 kPa) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JET 151 T three-phase Code: 60145787 Power supply: 1 x 230-400V~50Hz Power: 1.1kW (1.5HP) Capacitor capacity: 31.5mF Operating range: from 0.4 to 10.5 m³/h with head up to 62 metres Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 8 bar (800 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal block). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JET 251 T three-phase Code: 60145849 Power supply: 3 x 230-400V~50Hz Power: 1.85kW (2.5HP) Capacitor capacity: 31.5mF Operating range: from 0.4 to 10.5 m³/h with head up to 62 metres Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 8 bar (800 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal board). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: EUROPRO 100M single-phase Power supply: 1 x 230V~50Hz Power: 0.75kW (1HP ) Capacitor capacity: 25mF Maximum noise level: 66 db(A) Operating range: up to 400 l/min with head up to 15 m. Liquid temperature range: up to 60°C. PH Range: 6.5-8.4. Self-priming: up to 2 m (without foot valve) . Pumped liquid: clean or slightly dirty water with suspended solids or water treated with a chlorine process To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. Features General EUROPRO Pumps for swimming pools, ponds and salt water High efficiency self-priming centrifugal electric pumps with large capacity built-in pre-filter. Engine completely isolated from water. Extremely silent and highly reliable, developed for the circulation and filtration of water in domestic and residential swimming pools. Also suitable in particular applications where the handling of aggressive liquids is required, in fish farms, agriculture and industry. Series features: Operating range: up to 42 m3/h with head up to 22 m. Pumped liquid: clean or slightly dirty water with suspended solids, long fibres; particularly aggressive water with high percentages of chlorine/bromine and PHMB (Poly Hexamethylene Biguanide) or water treated with chlorine-electrolysis process. PH Range: 6.5-8.4 Liquid temperature range: up to 60°C Maximum ambient temperature: 50°C Maximum working pressure: 2.5 bar Nominal operating pressure: 0.8 - 1.2 Bar (ideal 1 Bar) Installation: fixed or portable in horizontal position. Special executions on request: other frequencies and/or voltages Fittings on request: 2"/50 - 63 kit (two fittings + O-ring - see "Accessories") Reference standard: IEC - 60364 Degree of protection of the motor and of the terminal box: IP55 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220/240 V - 50 Hz three-phase 230/400 V - 50 Hz Construction features of the pump: Pump body in glass fiber reinforced technopolymer. Pre-filter cover in transparent and anti-oxidation polycarbonate to ensure constant visibility over time. Nylon filter. Impeller in glass fiber reinforced technopolymer, developed to ensure total coverage and insulation of the motor shaft from the pumped liquid. Reinforced technopolymer diffuser. Mechanical seal in carbon / alumina / NBR / AISI 316. Pump body O-ring in NBR, screws and reinforcement ring nuts in AISI 316 steel. Butterfly filler and drain plugs that do not require the use of tools for removal and repositioning. Engine construction features: Continuous service asynchronous motor (S1) with 2 poles with a wide range of powers from 0.5 HP to 3 HP both single-phase and three-phase (see technical specifications). Motor casing in die-cast aluminum with cataphoresis surface treatment to prevent oxidation even in aggressive environments. Support base supplied as standard with rubber feet to reduce vibrations. Single-phase version with built-in thermo-amperometric protection and permanently inserted capacitor (PSC) and assembled inside the terminal box for all versions. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JETCOM 82 M single-phase Power supply: 1 x 220-240V~50Hz Power: 0.6kW (0.8HP) Capacitor capacity: 12.5mF Operating range: flow rate up to 60 l/min (3.6 m3/h) with head up to 47 metres. Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure: 6 bar (600 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JETCOM extension Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Suitable for use with water with small sandy impurities. Particularly used for water supply in domestic systems. Suitable for small-scale agriculture and gardening, limited industrial services and where the self-priming function is required. Series features: Operating range: up to 0.6 to 5.4 m3 /h with head up to 54 metres. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Liquid temperature range: from 0 °C to +35°C for domestic use (EN 60335-2-41). Maximum ambient temperature: +40°C Maximum working pressure: 6 bar (600 kPa) Maximum suction depth: 8 meters. Installation: fixed or portable in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220/240V / 50Hz three-phase 230/400V / 50H Construction features of the pump Pump body in technopolymer and motor support in die-cast aluminium. Technopolymer impeller, diffuser, venturi tube and sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Engine construction features Asynchronous type, closed, cooled by external ventilation. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Built-in thermo-amperometric protection and capacitor permanently inserted in the single-phase version. For the protection of the three-phase motor it is recommended to use a motor protection switch in accordance with current standards. Construction according to CEI 2-3 / CEI 61-69 (EN 60335-2-41) standards. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : DTRON 2 35/120 Power supply : 220~240/50/1 Power : 0.6 kW (0.8 HP) Maximum ambient and liquid temperature: 50°C Factory cut-in : 2.4 bar (±0.2) Flanging or delivery thread : Threaded 1" 1/4 Dimensions : 611x185mm New DTron 2 series The evolution of the submerged autoclave 43 years of experience. An unstoppable drive towards innovation. Constant communication with all markets. This is the ecosystem in which DAB products are born and evolve. The new DTron series is proof of this: an important step forward in redefining the characteristics of submersible pumps , made with the security of the market leader DTron 2 and DTron 3 are born from the desire to create a range of "easy" but extremely efficient pumps . Technologically advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories. DTron 2 Together with a series of fully integrated and modular accessories, they represent an offer of solutions for every use in different types of installations. The customized value For Dab it is essential to design solutions according to the real needs of all the players in the sector The new DTron submersible pumps guarantee advantages for installers, distributors and end users by saving them space, time and costs A large, constant and rapid evolution possible only thanks to the attention and listening of our top market experts: you. A Global Listen We move water all over the world, with over 2 million pumps installed every year we are also able to handle special needs. In Australia where nature still has a dominant role in the territory, the functioning of our products is put to the test by insects and small reptiles that infiltrate the pumps to make their den Thanks to this experience DAB has designed the new models of the DTron range making them unassailable by any external agent, solving the case that emerged in Australia and in fact making our solutions even safer in all geographical areas of the world Experiences and Innovation 43 years of experience, an unstoppable drive towards innovation and constant communication with all markets. This is the ecosystem in which DAB products are born and evolve The new DTron series is proof of this: an important step forward in redefining the characteristics of pumps submerged, made with the safety of the market leader DTron 2 was created to create a range of "easy" but extremely efficient pumps. Very advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories Integrated vase A quick and easy installation. A more essential and less bulky system. Greater reliability in time. The expansion vessel improves the pressure tightness of the system, avoiding unnecessary restarts, reducing water hammer and lengthening the life of the pump. With this integrated component, installation times are reduced NFC technology A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. NFC (Near Field Communication) allows the use of pumps with float and level sensor* without the need for any additional wiring. The accessories attach without having to disassemble the pump body. All this guarantees speed and reliability. PLC technology Only for DTron 3 A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. PLC (Power Line Communication) allows the use of the Com Box electronic control device without the need for any physical connection but through the electric power supply line. DConnect With DConnect Box 2 you access the DAB cloud service. The new App allows you to manage and monitor the system pressure, the alarms and the residual availability of water in the tank directly from your smartphone or tablet wherever you are! DTron 3 thus becomes the first submersible pump equipped with a display DOC68 Maximum installation flexibility. The ultimate in waterproofing. The maximum of unassailability. With this accessory and the IP68 certification, DTron pumps can also be installed out of the water, thus transforming submersible pumps into real traditional autoclaves Vent valve Benefits during installation and throughout use. The vent valve allows for immediate priming upon first installation and always guarantees the correct functioning of the pump. Facilitated maintenance Modular and functional construction. Thanks to the modular components of the pump it is possible to make maintenance easier. Elements that can be disassembled, repaired and replaced separately which simplify the management of any problems, reducing maintenance costs. Com Box Only for DTron 3 More comfortable. Smarter. With Com Box you can intervene on the pump pressure parameters and view any alarms. No direct connection to the pump is required (PLC Optional accessories X-Kit for the X version Combined with the X version, it allows the suction of water at a level such as to avoid the pumping of dust and sludge present on the bottom of wells and tanks DOC68 With the DOC68 it is possible to install DTron also outdoors as an IP68 certified surface pump Floating Allows the water level of the tank to be detected, preventing emptying of the same, and the pump to go into blockage, avoiding dry running due to too low a water level Level sensor Only for DTron 3 Connected to the DConnect Box 2, it checks the water level in the tank and communicates it to the user via the App (only on DTron 3) COM Box Only for DTron 3 It allows you to change the start and stop pressure and to check any pump alarms, in an easy and intuitive way DConnect Box 2 Only for DTron 3 Thanks to DConnect Box 2 you can control the pump, set the start and stop parameters, see alarm details and monitor the pressure directly from your smartphone, obtaining the best performance and lightness of maintenance never seen before Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION The product will be available on order and will be shipped in 10 working days! Technical features Product code : JET 251 M Power supply : 1x 220-240V ~ 50Hz Power : 1.85 kW (2.5 HP) Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral Operating range: from 0.4 to 10.5 m 3 /h with head up to 62 metres. Liquid Temperature Range: from 0°C to +35°C for domestic use, from 0°C to +40°C for other uses Maximum Ambient Temperature: +40° C Maximum working pressure: 8 Bar (800 kPa) Installation : Fixed in horizontal position Special Executions on Request: Other frequencies and/or voltages Motor Protection Degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class : F Applications • Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles • Suitable for use with water with small sandy impurities • Particularly used for water supply in domestic systems. • Suitable for small-scale agriculture and gardening, limited industrial services and where the self-priming function is required Construction features of the pump • Pump body and motor support in cast iron • Technopolymer impeller, diffuser, venturi tube and sand guard • Double impeller for the JET 151 and 251 version • Stainless steel shim rings • Carbon/ceramic mechanical seal Construction Characteristics of the Engine • Asynchronous type, closed, cooled by external ventilation • Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability • Incorporated thermo-amperometric protection and capacitor permanently inserted in the single-phase version • To protect the three-phase motor, it is recommended to use a motor protection switch in accordance with current standards • Construction according to CEI 2-3 / CEI 61-69 (EN 60335-2-41) standards Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: MULTI INOX 5 Code : 60122694 Number of impellers : 5 Operating range: flow rate up to 90 l/min; head up to 59 m Liquid temperature range: from 0°C to +35°C for domestic use, from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum suction depth: 8 meters Maximum ambient temperature: +40°C Degree of protection: IPX4 Insulation class: F Installation: fixed or portable in horizontal position Special versions on request: other voltages and/or frequencies Packing dimensions : 460 x 230 x 270 Weight 12.5kg DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics Self-priming, multi-impeller pump, ideal for water supply in domestic and garden applications. Very performing and highly silent. Available with 3, 4 and 5 impellers in AISI 304 stainless steel. Anti-corrosion and anti-overheating materials. Double insulation system between motor and hydraulic part. Excellent resistance to low temperatures. Equipped with power cable plus plug. Engine construction features: Stainless steel pump jacket. Pressure body, suction body and motor support in technopolymer. Impellers in AISI 304 steel, diffuser bodies and diffusers in technopolymer. Mechanical seal in carbon/ceramic. Rotor shaft in AISI 304 steel. Continuous service single-phase asynchronous motor. Built-in thermo-amperometric protection and permanently inserted capacitor. APPLICATIONS Multistage centrifugal pump with horizontal axis, self-priming with excellent suction capacity even in the presence of air bubbles, characterized by extremely silent operation suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JET 62 M single-phase Code: 102660000 Power supply: 1 x 220-240V~50Hz Power: 0.44kW (0.6HP) Capacitor capacity: 12.5mF Operating range: flow rate up to 60 l/min (3.6 m3/h) with heads up to 42 metres. Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 6 bar (600 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal block). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : BOOSTER SILENT 4 M Operating range: Flow rate up to 80 l/min head up to 46 m Liquid temperature range : from 0°C to +35°C for domestic use, from 0°C to +40°C for other uses. Pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral Maximum suction depth: 8 meters Maximum ambient temperature: +40°C Degree of protection: IPX4 Insulation class: F Installation: fixed or portable in horizontal position. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics The Dab Booster Silent 0.75 HP pump is a silent single-phase electric pump with only 67 dB. The real revolution in the Dab house is the silent booster electric pump. APPLICATIONS Automatic, multi-impeller (3-4-5) and self-priming pressurization system up to 8 meters with integrated electronics, for water supply household, gardening and small irrigation systems. CONSTRUCTION FEATURES Hulls in sound-absorbing composite material and hydraulic components in technopolymer. Mechanical seal in carbon / ceramic. Continuous service single-phase asynchronous motor cooled by the pumped liquid. Built-in thermo-amperometric protection and permanently inserted capacitor. The system is equipped with an integrated electronic board, pressure switch and flow switch for automatic start and stop when the utilities are opened and closed. The electronic device prevents dry running of the pump. Equipped with status and alarm LEDs. Provides automatic or manual restart when error conditions are restored. The system is supplied with a non-return valve on the suction side, a 2-metre power cord with plug and a 2-litre tank. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : BOOSTER SILENT 5 M Operating range: Flow rate up to 80 l/min head up to 46 m Liquid temperature range : from 0°C to +35°C for domestic use, from 0°C to +40°C for other uses. Pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral Maximum suction depth: 8 meters Maximum ambient temperature: +40°C Degree of protection: IPX4 Insulation class: F Installation: fixed or portable in horizontal position. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics The Dab Booster Silent 0.75 HP pump is a silent single-phase electric pump with only 67 dB. The real revolution in the Dab house is the silent booster electric pump. APPLICATIONS Automatic, multi-impeller (3-4-5) and self-priming pressurization system up to 8 meters with integrated electronics, for water supply household, gardening and small irrigation systems. CONSTRUCTION FEATURES Hulls in sound-absorbing composite material and hydraulic components in technopolymer. Mechanical seal in carbon / ceramic. Continuous service single-phase asynchronous motor cooled by the pumped liquid. Built-in thermo-amperometric protection and permanently inserted capacitor. The system is equipped with an integrated electronic board, pressure switch and flow switch for automatic start and stop when the utilities are opened and closed. The electronic device prevents dry running of the pump. Equipped with status and alarm LEDs. Provides automatic or manual restart when error conditions are restored. The system is supplied with a non-return valve on the suction side, a 2-metre power cord with plug and a 2-litre tank. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : E.SYBOX MINI 3 Power supply : x 220 - 240V ~ 50Hz Power : 0.85 kW (1.1 HP) Operating range : Flow rate up to 80 l/min and head up to 55 metres Pumped liquid: Clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral Liquid Temperature Range : From 0°C to +35°C for domestic use From 0°C to +40°C for other uses Maximum suction depth: 8 metres Maximum Ambient Temperature: +50° C Maximum working pressure: 7.5 bar (750 kPa) Motor Protection Degree: IPX4 Insulation class : F Installation : Fixed horizontal or vertical position Special versions on request: Other types of electric plug on request DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. E.sybox mini 3 One of a kind It obviously looks different from any other autoclave system, it's small and all integrated, but as you install and use it you realize that the real difference is in the comfort and performance. E.sybox mini 3 uses the most advanced DAB technologies to allow constant pressure based on demand and consequently an optimization of energy consumption. Suitable for use with potable water, in domestic systems and in gardening applications. The new 3 impeller model ensures a further reduction in noise and consumption. Managing the water pressure in your home has never been so simple and silent APPLICATIONS Apartments up to 3 floors, 2 bathrooms and 50m 2 of garden SUITABLE FOR PUMPING WATER FROM: ALWAYS CONSTANT PRESSURE FOR MAXIMUM COMFORT Thanks to the inverter technology, once the desired pressure has been set, the E.sybox mini 3 always keeps it constant for all the users served QUIET Designed for Relaxation The water-cooled motor, inverter electronics, sound-absorbing hulls and anti-vibration feet make E.sybox mini 3 the second quietest autoclave system on the market, after E.sybox SAVINGS CHAMPION First place Guarantees the comfort of constant pressure (Set Point adjustable from 1 to 5.5 bar) in the system and ¤120/year* savings on bills thanks to inverter technology MINIMUM ENCUMBRANCE Maximum Compactness The new architecture of the components and the ergonomic design make it so compact that it can be installed in any environment, even under the kitchen sink! INTEGRATED All in One With the exception of the suction and delivery pipes, it does not require any additional components for its installation DISPLAY Easy adjustment Adjustable high resolution 70x40 mm LCD to adapt readability to the various installations. The intuitive interface allows you to access all the information and customize the main settings according to the specifics of the application WIRELESS On Board Thanks to the integrated wireless card E.sybox mini 3 can connect to the internet MAXIMUM VERSATILITY 3 Installation Positions Horizontal, vertical or wall-mounted E.sybox mini 3 can be installed virtually anywhere inside or outside the home Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less