General characteristics Brand: Dab Model: Europro 75M Code: 60189899 Typology: Single-phase Data sheet Operating range: up to 42 m3/h with head up to 22 m. Pumped liquid: clean or slightly dirty water with solid bodies in suspension, long fibers; particularly aggressive water with high percentages of chlorine/bromine and PHMB (Poly Hexamethylene Biguanide) or water treated with chlorine electrolysis process. PH Range: 6.5-8.4 Liquid temperature range: up to 60°C Maximum ambient temperature: 50°C Maximum working pressure: 2.5 bar Nominal operating pressure: 0.8 - 1.2 Bar (ideal 1 Bar) Installation: fixed or portable in horizontal position. Special executions on request: other frequencies and/or voltages Fittings on request: 2"/50 - 63 kit (two fittings + O-ring - see "Accessories") Reference standard: IEC - 60364 Degree of protection of the motor and of the terminal box: IP55 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220/240 V - 50 Hz Description APPLICATIONS High efficiency self-priming centrifugal electric pumps with large capacity built-in pre-filter. Engine completely isolated from water. Extremely silent and highly reliable, developed for the circulation and filtration of water in domestic and residential swimming pools. suitable also in particular applications where the handling of aggressive liquids is required, in fish farms, agriculture and industry. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body in glass fiber reinforced technopolymer. Transparent and anti-oxidation polycarbonate pre-filter cover to ensure visibility constant over time. Nylon filter. Impeller in glass fiber reinforced technopolymer, developed to ensure total coverage and insulation of the crankshaft by the pumped liquid. Reinforced technopolymer diffuser. Mechanical seal in carbon / alumina / NBR / AISI 316. Body O-ring pump in NBR, screws and reinforcing ring nuts in AISI 316 steel. Butterfly filler and drain plugs that do not require the use of tools for removal and repositioning. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Continuous service asynchronous motor (S1) with 2 poles with a wide range of powers from 0.5 HP to 3 HP both single-phase and three-phase (see specifications techniques). Motor casing in die-cast aluminum with cataphoresis surface treatment to prevent oxidation even in aggressive environments. Support base supplied as standard with rubber feet to reduce vibrations. Single-phase version with built-in thermo-amperometric protection e permanently inserted capacitor (PSC) and assembled inside the terminal box for all versions. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Dab EvoPlus B 60/220.40 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed ​​and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values ​​are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Dab Code: 60194400 Model: NOVA 300 MA Data sheet Operating range: from 1 to 16 m3/h with heads up to 10.2 metres. Liquid temperature range: from 0°C to +35°C for domestic use Pumped liquid: cloudy water without fibers Particle size passing through the suction grille: NOVA 180 - NOVA 200 5mm. NOVA 300 - NOVA 600 10 mm. depth min. draft: NOVA 180 A 77mm NOVA 180 NA - NOVA 200 8mm NOVA 300 85mm NOVA 600 A 175mm NOVA 600 NA 38mm Maximum immersion: 7 meters. Maximum dry run time: 1 minute. Degree of protection: IP68. Insulation class: F Description The submersible pump of the NOVA series is suitable for domestic use of stationary applications with automatic operation, for draining basements and garages subject to flooding. Thanks to its compact and handy shape, it also finds particular application as a portable pump for emergencies such as: drawing water from tanks or rivers, emptying pools and fountains or excavations and underpasses. Also suitable for gardening and hobby work in general. The level switch allows a fixed installation guaranteeing its automatic functioning. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body, impeller, cap and suction grille in water-resistant technopolymer. Motor, rotor shaft and screws in stainless steel. Triple seal with interposed rings with pre-oil chamber. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Continuous service asynchronous submersible type. Stator inserted in a stainless steel hermetic casing and covered by a cap that encloses wiring, microswitch and capacitor. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Built-in thermo-amperometric protection and capacitor permanently inserted in the single-phase version. For the protection of the three-phase motor it is recommended to use a motor protection switch in accordance with the standards. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : FEKAFOS 550 DOUBLE Operating range : from 1 to 32 m3 /h with head up to 23 metres Liquid temperature range : + 45° C Pumped liquid: ground water, rain water, clear waste water, black waste water and river or lake water. Installation : Fixed to the floor if inside a building. Inground if outside a building Not drive-over, but walkable only up to 100 kg. Temperature range of the pumped liquid: +45° C Size : 790 x 1220 x 965 Weight : 74Kg FEKAFOS 550 DOUBLE AUTOMATIC LIFTING STATIONS FOR 2 PUMPS APPLICATIONS Pumping stations suitable for the collection and return to the sewer system of domestic waste water (waste, gray and rain), of basements or garages for one or more housing units, when the sewer system cannot be reached by gravity CONSTRUCTION FEATURES CAPACITY: 550 l MATERIALS: LLDPE CONNECTIONS: Inlets DN 50/110 Ventilation DN 50 - Outlet G2” COMPONENTS INCLUDED: 2 DSD2” lifting devices and anti-rotation bracket for FEKA VS and VX 6 Cable glands for double pump and floats 2 FEKA VS and VX floating cable clamp kit 3 Floats and alarm float holder COMPONENTS EXCLUDED: Pump: to be selected according to the possible configurations Panel: to be selected according to the possible configurations Panel: to be selected according to the possible configurations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

TECHNICAL DATA Operating range: from 0.5 to 36 m3 /h Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +40°C Maximum ambient temperature: +40°C Maximum working pressure: PN16 Special executions on request: contact the sales network Degree of protection: IP44 APPLICATIONS Booster sets particularly suitable for domestic use, small systems for civil or industrial use, irrigation systems, washing systems. They stand out for their absolute reliability, simplicity of operation and minimal maintenance. CONSTRUCTION CHARACTERISTICS - COMPONENTS HYDRAULIC PART KVC multistage centrifugal electric pumps. Galvanized sheet metal base complete with 4 anti-vibration rubber feet. Suction and delivery manifolds in AISI 304 steel. Ball valves with union on the suction and delivery of each pump. Suction check valves of each pump. 2 AISI 304 stainless steel caps for closing the manifolds. Radial pressure gauge with shut-off valve. 1 membrane tank 8 liters (optimizes the number of pump starts). ELECTRICAL PART 1 Active Driver Plus module on the delivery of each pump (see hints on Active Driver Plus at the beginning of the paragraph). 1 protection switchboard. MULTI INVERTER SYSTEM WITH ACTIVE DRIVER PLUS The inverter continuously regulates the rotation speed of an electric pump, so as to maintain a constant pressure as the flow rate varies. The other electric pumps, always at variable speed, are inserted in cascade after the first one has reached maximum speed and, by modulating, they compensate for the pressure fluctuations in the system. At each operating cycle, it is possible to set the restart switching to a different pump, so as to guarantee uniform use of all the electric pumps. It is also possible to set work times for each pump, with operation switching after the set time. The “SP” pressure can be adjusted by the user using two keys “+” and “-” placed on the AD (as a rule all the pumps are set to the same pressure value). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL DATA Operating range: from 0.5 to 36 m3 /h Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +40°C Maximum ambient temperature: +40°C Maximum working pressure: PN16 Special executions on request: contact the sales network Degree of protection: IP44 APPLICATIONS Booster sets particularly suitable for domestic use, small systems for civil or industrial use, irrigation systems, washing systems. They stand out for their absolute reliability, simplicity of operation and minimal maintenance. CONSTRUCTION CHARACTERISTICS - COMPONENTS HYDRAULIC PART KVC multistage centrifugal electric pumps. Galvanized sheet metal base complete with 4 anti-vibration rubber feet. Suction and delivery manifolds in AISI 304 steel. Ball valves with union on the suction and delivery of each pump. Suction check valves of each pump. 2 AISI 304 stainless steel caps for closing the manifolds. Radial pressure gauge with shut-off valve. 1 membrane tank 8 liters (optimizes the number of pump starts). ELECTRICAL PART 1 Active Driver Plus module on the delivery of each pump (see hints on Active Driver Plus at the beginning of the paragraph). 1 protection switchboard. MULTI INVERTER SYSTEM WITH ACTIVE DRIVER PLUS The inverter continuously regulates the rotation speed of an electric pump, so as to maintain a constant pressure as the flow rate varies. The other electric pumps, always at variable speed, are inserted in cascade after the first one has reached maximum speed and, by modulating, they compensate for the pressure fluctuations in the system. At each operating cycle, it is possible to set the restart switch to a different pump, so as to ensure uniform use of all the electric pumps. It is also possible to set work times for each pump, with operation switching after the set time. The “SP” pressure can be adjusted by the user using two keys “+” and “-” placed on the AD (as a rule all the pumps are set to the same pressure value). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: JET 132 M single-phase Code: 102660100 Power supply: 1 x 220-240V~50Hz Power: 1kW (1.36HP) Capacitor capacity: 25mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with heads up to 48 metres. Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 6 bar (600 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal block). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Dab EvoPlus B 120/280.50 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed ​​and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values ​​are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION The product will be available on order and will be shipped in 10 working days! Technical features Product code : Esyvox Diver Power supply : 220~240/50/1 Power : 0.95 (1.3 HP) Flanging or delivery thread: 1/4" Maximum diameter of the pump: 185 mm Maximum flow rate, 7.2 m 3 /h Maximum head : 55 m Maximum Immersion Depth : 12 meters standard version Type of Pumped Liquid : Clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral Free Passage: 2 mm Minimum suction level: 110 mm Minimum Residual Water Level: 35 mm Minimum and maximum temperature of the liquid : From 0°C to +55°C Maximum ambient temperature : <0°C / +50°C Maximum Operating Depth : 15 m Adjustable Constant Pressure : factory set at 3bar, adjustable from 1 to 5.5 bar Impeller(s) Construction Material: Technopolymer with AISI 304 stainless steel ring Maximum number of starts per hour: 60/h Degree of Protection of the Pump : IP 68 Suitable for Continuous Use : Yes Motor insulation thermal classification : F Power cable: 15 meters with plug Type of Installation : Fixed, horizontal or vertical. Submerged or semi-submerged. It is possible to install it on the surface, under the hinged door, in a vertical position with the DOC68 external accessory (supplied separately) DAB Easybox Diver Immerse yourself in the future of water pressure boosting The new arrival in the family Esybox Diver was born from the propensity for technological innovation and attention to market needs of DAB , which combines the sturdiness and reliability of DAB products with the disruptive idea of ​​functional design of Esybox Line . An efficient and safe "all in one" product but absolutely flexible and versatile, capable of responding to the different needs of those who use it A New Somersa Pump : All in One but with Endless Benefits • STANDARD VERSION : Installation in tank • DRY VERSION : Surface installation • VERSION X : Installation in cockpit The Value of Simplicity DAB has always designed solutions paying close attention to the needs of anyone who uses them. The new Esybox Diver combines the advantages of advanced integrated inverter electronics with the flexibility that is obtained from remote management, via a simple and immediate app. With the standard app it is possible to quickly and easily set the pressure request which is modulated by the integrated inverter, according to need. The result is double. In addition to satisfying the needs of customers and end users, there is considerable energy saving: an added value that comes from experience and from listening to the market. D Connect With DConnect Box 2 you access the DAB cloud service. You will thus be able to customize the parameters, check consumption, set the alarms and pressurization directly from your smartphone or tablet, wherever you are! Esybox Diver thus becomes the first submersible pump equipped with a display DAB always has the solution With over 2 million pumps installed every year, we move water all over the world but we are still able to handle even special needs. Like those of those who want to save money but don't want to give up the comfort of an energetic shower. Therefore, we have integrated electronics and connectivity by combining them to provide a product that is reliable, highly energy-saving, versatile and also easy to use. We listen to our customers because they are the greatest experts in our market ALL IN ONE Technology + Connectivity : Crossover of Submersible Pumps More than 40 years of experience. An unstoppable propensity towards innovation. Constant communication with all markets. A listening that turns into solutions. This is the ecosystem in which DAB products are born and evolve. Esybox Diver breaks the mold of submersible pumps to become the residential solution with impeccable performance, absolutely efficient, technologically advanced but extremely simple to use. Reliability and comfort are within reach. Thanks to a set of intelligent accessories, Esybox Diver lends itself to any type of application Integrated vase A quick and easy installation. A more essential and less bulky system. Greater reliability over time The expansion tank improves the pressure tightness of the system, avoiding unnecessary restarts, dampening water hammers and lengthening the life of the pump. With this integrated component, installation times are significantly reduced NFC and PLC technologies A simple and constant control of the pump. Maximum ease and autonomy in installing accessories NFC (Near Field Communication) allows the use of pumps with float and level sensor* without the need for any additional wiring. The accessories attach without having to disassemble the pump body. All this guarantees speed and reliability. PLC* (Power Line Communication) allows the use of the DConnect Box 2 electronic control device without the need for any physical connection but through the power supply line Integrated inverter Technology at the service of comfort and energy saving. The integrated inverter allows you to adapt the water pressure according to actual needs, thus optimizing performance and energy consumption Vent valve Benefits during installation and throughout use The vent valve allows for immediate priming upon first installation and always guarantees the correct functioning of the pump Facilitated maintenance Modular and functional construction Thanks to the modular components of the pump it is possible to make maintenance easier. Elements that can be disassembled, repaired and replaced separately which simplify the management of any problems, reducing maintenance costs. DConnect Box 2 Convenience at your fingertips DConnect Box 2 can monitor up to 4 pumps and can be connected to the Internet via modem, via Wi-Fi only. Once connected, just follow the easy instructions in the App wizard to connect it to the DAB Cloud, thus managing your pump with ease Internet Of Pumps Is Already A Reality Always in Touch with Your Systems DConnect is the new DAB cloud service that allows you to control and manage your installations remotely, in real time and wherever you are Thanks to the cloud connectivity of DConnect it is possible to monitor the activity and consumption of Esybox Diver or customize its parameters and alarms, staying updated on its operation and preventing the risk of malfunctions and blockages Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : DIVER 150 T-NA Power supply : 3x400V~ 50Hz Power : 1 kW (1.5 HP) Diameter : 127mm Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: Clean, without solid or abrasive bodies, non-aggressive Maximum presence of sand in the water: 50gr/ m3 Liquid Temperature Range : from 0°C to +35°C Maximum immersion : 20 metres Delivery port diameter: 1" 1/4 Gas Power Tolerance : +6% / -10% Maximum number of starts: 20/h Motor Protection Degree: IP 68 Engine Protection Class : F Installation : In wells, tanks and cisterns, in vertical position Special Executions on Request: Other voltages and/or frequencies. Automatic version with float. Applications DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. Outer jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side Construction Characteristics of the Engine • Submersible two-pole asynchronous type built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L • Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability • On request, the single-phase version is supplied with the CONTROL BOX • Protection by the user for the three-phase version • Automatic version with float available • Version with support base and side suction (DRY) available on request Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: DIVERTRON Code: 60122623 Operating range: from 1 to 5.4 m 3 /h with heads up to 46 metres Pumped liquid: clean, without solid or abrasive bodies, non-aggressive Liquid temperature range: from 0°C to +35°C Maximum immersion: 12 meters Motor protection degree: IP 68 Engine protection class: F Installation: fixed or portable in vertical position Operation: manual or automatic with electronic ON/OFF (continuously with pump totally immersed) Power supply: 1 x 220-240V~50Hz Delivery port diameter: 1” Maximum diameter of the pump: 150mm DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. DAB DIVERTRON Electronic Multi-impeller Electric Pump DAB's Divertron is a 6 inch electronic submersible clean water pump designed for pressurization and gardening and irrigation tasks in domestic and residential settings. Divertron is ideal for use in rainwater recovery systems and to increase the pressure of the water taken from a cistern or tank to be used, for example, to water the garden or vegetable garden. Divertron integrates a pressure switch , a flow sensor and the control electronics for automatic on and off. The automatic operation allows the pump to start and stop autonomously according to the requests of the system and protects it from dry running . Supplied with integrated start capacitor, non-return valve and 15m power cable with Schuko plug Applications Multi-impeller electric submersible pumps with integrated electronics for automatic switching on and off. Ideal for use in rainwater systems and irrigation networks, for pumping water from tanks, ponds and wells and other applications that require high pressure. Available with 3 or 4 impellers. Integrated pressure switch, electronic board and flow sensor. Dry-running protection. Non-return valve integrated in the delivery. Easy to use, and high reliability. Suitable for pumping clean water. Excellent cooling of the motor which allows the operation of the pump even if only partially submerged. Supplied with stainless steel suction filter or with stainless steel fitting for use with suction kit, particularly suitable for tanks with possible presence of debris or dirt on the bottom. An equipped version with suction kit is also available Construction features of the pump: Anti-corrosion and anti-oxidation material Stainless steel debris filter Engine construction features: Continuous service asynchronous submersible type Thermal protection against overheating. Anti-wear crankshaft Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

D-CONNECT DAB Wi-Fi control cod. 60196424 DConnect is the new DAB cloud service that allows you to control and manage your installations remotely , in real time and wherever you are. You can control pumps for pressurization, for waste water management and circulators for heating and air conditioning. Technical assistance and constant remote monitoring 24/7 Improve your customer service and simplify your work It supports different types of applications Lower building management costs Can also be used in pre-existing systems (if compatible products and a permanent Internet connection are present at the installation site) Control your system from anywhere at any time. From home, from the office, from work, on the road, wherever there is an Internet connection! Thanks to D.Connect you can control and manage the pumps from your smartphone, tablet or PC as if you were on site even if you are hundreds of kilometers away! Connected pumps, like any other network-connected (IoT) object, present risks of cyber attacks. DAB has been developing a cybersecurity culture for years to ensure safe and secure solutions for our customers. DConnect, in its hardware and software components, has been tested following the most restrictive international security protocols. The DConnect service can be used to manage one or more pumps for water pressure boosting, wastewater management and circulation in heating and air conditioning systems. It is a multi-channel service with high added value which, regardless of the nature and size of the system, simplifies configuration by always showing the same interface and the same tools. The modularity offered by DConnect allows you to manage up to 8 different pumps and up to 4 pumps with the DConnect Box 2, in an extremely simple and integrated way. Compatible with: DAB IoP Internet of Pumps! The D.Connect service consists of a modern and advanced Cloud system and a hardware part, the D.Connect Box, essential for connecting the pumps to be controlled to the Internet. With this service, DAB pumps enter the IoT world, or rather IoP! IMMEDIATELY READY TO USE D.Connect does not require any particular infrastructure for installation: an internet connection near the installation and a smartphone are enough. The configuration takes place in a few simple guided steps. THE SERVICE THAT MAKES YOUR LIFE EASIER With D.Connect, monitoring DAB products becomes easier and more intuitive than ever and all the main adjustments can also be made remotely, in just a few steps. For total control and no surprises. TECHNOLOGY WITHIN EVERYONE'S REACH Made with the most recent technologies, DConnect guarantees many advantages compared to other traditional BMS applications. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less