THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES WHILE THE CODE WITHOUT "PO" IS A THREADED FITTING IN MALLEABLE CAST IRON WITH BLACK CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS " COMMERCIAL TYPE"

Read more less

THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES

Read more less

Technical features Dimensions External Diameter: 18 mm Thickness : 1mm External diameter of the tube: 30 mm Roll length : 50m Burst Pressure: 24.93 MPa Working Pressure : 6.23 MPa Water Content: 0.201 l/m SMISOL® Tekgas Practical and Safe SMISOL® Tekgas is the copper pipe produced according to the EN 1057 standard, coated during production with a special low-density closed-cell structure polyethylene sheath, manufactured in the sizes required by UNI 7129. Thanks to the particularity of the coating, co-extruded continuously on the copper pipe, and in the presence of spacers wound in a helical direction with respect to the axis of the pipe, it is particularly suitable for the transport of liquid and gaseous fuels. Spacers ensure that the sheath has an internal diameter that is 10 mm larger than the external diameter of the pipe. This geometric peculiarity allows the pipe to be used for crossing walls and floors without adding an additional metal sheath in full compliance with UNI 7129-1 which states in point 4.4.1.5: "When crossing perimeter and external walls, bricks blocks, perforated bricks and prefabricated panels, the gas supply pipe must not have joints, with the exception of the inlet and outlet joints and must be protected with a gas-tight through sheath. The sheath can be indifferently metal or polymeric material, the sheath must have an internal diameter greater than 10 mm compared to the external diameter of the pipe. This pipe can be laid concealed even in critical situations where the walls contain cavities (for example perforated bricks) this is always possible thanks to the polymeric sheath that continuously wraps the copper pipe, during installation it is sufficient to drown SMISOL® Tekgas in 15 mm of cement mortar to comply with the provisions of UNI 7129-1 point 4.5.5.5 and point 4.5.5.6. The helical shape of the spacers ensures that the interspace between the pipe and the sheath remains constant even in the 90° bends, avoiding crushing, in this way in the event of a leak, the danger of the formation of gas pockets is avoided. The in-line coating process ensures high malleability, superior to similar products on the market. In order to preserve this exclusive feature, the rolls of SMISOL®Tekgas have a very large winding diameter which, with the characteristics already described, make them a practical and particularly professional product at the same time. Furthermore, to protect the final consumer, in compliance with EU Regulation 305/2011 for construction products (CPR) , the copper pipes manufactured by SCT according to EN1057 are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ quality mark Internal Protection During production, it is subjected to a patented treatment of passivation and stabilization of the internal wall . SMISOL®Tekgas copper pipe has a carbon residue C < 0.06 mg/dm2, much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤ 0.20 mg/dm2 External Protection The low-density closed-cell polyethylene coating protects the pipe from attacks exerted from the outside by building materials (e.g. quick-setting cement) and from damage caused by knocks during transport to the construction site. It complies with the reg. CEE/UE 2037/2000 and has a fire behavior of class BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84) Folding With reference to the bending methods using a special tube bender, it should be noted that the matrices and counter matrices to be used can differ significantly according to the brand and model used. For any information and clarification, you can contact us on the toll-free number or e-mail address listed on the cover Coating Features Covered in closed cell low density polyethylene. Helically wound spacers. Air gap: 5 mm min. Excellent resistance to external chemical agents. Ink marking every metre. Class 1 non-flammable Behavior in fire: BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84) Fields of Use Distribution of liquid and gaseous fuels with particular reference to masonry structures where the use of non-metallic sheath pipes is necessary In compliance with and within the limits established by the regulations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Dimensions Outer Diameter : 6,35mm (1/4") - 9,52mm (3/8") - 12,70mm (1/2) Thickness : 1.0mm Roll length : 50m De : Outside diameter Sp : Thickness Minimum Coating Thickness Minimum Coating Thickness 1/4 : 6 mm Minimum Coating Thickness 3/8 : 8 mm Minimum Coating Thickness 1/2 : 10 mm Burst Pressure Burst Pressure 1/4 : 70.68 MPa Burst Pressure 3/8 : 47.14 MPa Burst Pressure 1/2 : 35.34 MPa Operating pressure Working Pressure 1/4 : 17.67 MPa Working Pressure 3/8 : 11.79 MPa Working Pressure 1/2 : 8.83 MPa Water content Water Content 1/4 : 0.015 l/m Water Content 3/8 : 0.044 l/m Water Content 1/2 : 0.090 l/m SMISOL®Clim Platinum The climate specialist It is the copper pipe produced according to the EN 12735-1 standard, and is pre-insulated in closed cell expanded polyethylene of regular dimensions and uniformly distributed (UNI EN 14114). It is distributed in rolls. The diameter of the copper pipe, as required by the EN 12735-1 standard, is expressed in inches. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective film in polyethylene aimed at preventing the formation of condensation on the external wall of the product. SMISOL®Clim Platinum is also characterized by particularly low eccentricity values, a very important feature for flaring operations. Inner surface The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the system. The particular internal cleanliness of SMISOL®Clim Platinum is safeguarded by closing the ends of each roll with caps, directly during production Coating Features Thermal conductivity: l≤ 0.040 W/m°C Average value of the resistance factor to the diffusion of water vapor "μ" > 15,000 Average density of the coating: 30 kg/m3 Free from ammonia residues Excellent resistance to external chemical agents Non flammable class 1 (DM 26/06/84) Behavior in fire: BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84) Free from CFC and HCFC (Reg. EEC/EU 2037/2000) Pigmentation of the outer film “Silver grey” Greater resistance to UV rays Halogen-free flame retardant Fields of Use Conditioning Transport of refrigerant gases. (R32, R410A, R407,...) In compliance with and within the limits established by the regulations. External Protection Covering in closed cell expanded polyethylene with an average value of the resistance factor to the diffusion of water vapor "μ" greater than 15,000 . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFC and HCFC, gases harmful to health and the environment and has a fire behavior class BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84). The outer polyethylene film contains a darker pigment than the traditional white in order to counteract the crystallization process of PE. Furthermore, the normal anti-UV additives have an antagonistic effect towards the flame retardant necessary for the product. In order to avoid this inconvenience, the sheath of SMISOL®Clim Platinum contains an ecological halogen-free flame retardant which does not counteract the anti-UV action. Tests carried out according to the ASTM G-155 standard (accelerated aging) demonstrate that SMISOL®Clim Platinum is suitable in areas with strong annual solar radiation . At the end of the exposure test, the sample did not show any signs of degradation Accelerated Aging Test The test provides for a duration of 4,000 hours of exposure in a weatherometer with a CI65 Xenon lamp which is equivalent in Kly to about 3 years of continuous exposure in Northern Italy or 2 years in Southern Italy Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

.

Read more less

FOR SANITARY, HEATING AND INDUSTRIAL SYSTEMS

Read more less

MADE OF FORGED AND SPECIAL TEMPERED STEEL. PARTICULARLY SUITABLE FOR BATTERY AND WIRE PRESSERS, NOT FOR MANUAL PRESSERS.

Read more less

COMPLETE WITH MATRICES (20 - 25 - 32) AND CASE. IDEAL FOR WELDING PP, PB, PE, PVDF PIPES AND FITTINGS.

Read more less

CONNECTION SET FOR WALL-HUNG TOILETS, LENGTH 18.5 CM, WITH ROUND SEAL. FOR HALL-HUNG TOILETS

Read more less

PRESS FITTING FOR MULTILAYER, TH SYSTEM.

Read more less

PRESS FITTING FOR MULTILAYER, TH SYSTEM.

Read more less

RESISTANT TO LOW AND HIGH TEMPERATURES. ACOUSTICLY OPTIMIZED. RESISTANT TO ULTRAVIOLET RAYS. RESISTANT TO AGGRESSIVE SUBSTANCES. PRE-ASSEMBLED EPDM SEALS.

Read more less