icon Copper Pipe Smisol Clim Platinum Schubes For Air Conditioning 50 Meters Thickness 1.0 Mm With Diameter 1/4 - 3/8 - 1/2 3/8" | CaldaieMurali

Copper Pipe Smisol Clim Platinum Schubes For Air Conditioning 50 Meters Thickness 1.0 Mm With Diameter 1/4 - 3/8 - 1/2 3/8"

Description

Technical features

  • Dimensions Outer Diameter : 6,35mm (1/4") - 9,52mm (3/8") - 12,70mm (1/2)
  • Thickness : 1.0mm
  • Roll length : 50m
De : Outside diameter
Sp : Thickness
Minimum Coating Thickness
  • Minimum Coating Thickness 1/4 : 6 mm
  • Minimum Coating Thickness 3/8 : 8 mm
  • Minimum Coating Thickness 1/2 : 10 mm
Burst Pressure
  • Burst Pressure 1/4 : 70.68 MPa
  • Burst Pressure 3/8 : 47.14 MPa
  • Burst Pressure 1/2 : 35.34 MPa
Operating pressure
  • Working Pressure 1/4 : 17.67 MPa
  • Working Pressure 3/8 : 11.79 MPa
  • Working Pressure 1/2 : 8.83 MPa

Water content

  • Water Content 1/4 : 0.015 l/m
  • Water Content 3/8 : 0.044 l/m
  • Water Content 1/2 : 0.090 l/m

SMISOL®Clim Platinum The climate specialist

It is the copper pipe produced according to the EN 12735-1 standard, and is pre-insulated in closed cell expanded polyethylene of regular dimensions and uniformly distributed (UNI EN 14114). It is distributed in rolls. The diameter of the copper pipe, as required by the EN 12735-1 standard, is expressed in inches. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective film in polyethylene aimed at preventing the formation of condensation on the external wall of the product. SMISOL®Clim Platinum is also characterized by particularly low eccentricity values, a very important feature for flaring operations.


Inner surface

The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the system.

The particular internal cleanliness of SMISOL®Clim Platinum is safeguarded by closing the ends of each roll with caps, directly during production


Coating Features

  • Thermal conductivity: l≤ 0.040 W/m°C
  • Average value of the resistance factor to the diffusion of water vapor "μ" > 15,000
  • Average density of the coating: 30 kg/m3
  • Free from ammonia residues
  • Excellent resistance to external chemical agents
  • Non flammable class 1 (DM 26/06/84)
  • Behavior in fire: BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84)
  • Free from CFC and HCFC (Reg. EEC/EU 2037/2000)
  • Pigmentation of the outer film “Silver grey”
  • Greater resistance to UV rays
  • Halogen-free flame retardant

Smisol


Fields of Use

  • Conditioning
  • Transport of refrigerant gases. (R32, R410A, R407,...)

In compliance with and within the limits established by the regulations.


External Protection

Covering in closed cell expanded polyethylene with an average value of the resistance factor to the diffusion of water vapor "μ" greater than 15,000 . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFC and HCFC, gases harmful to health and the environment and has a fire behavior class BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84). The outer polyethylene film contains a darker pigment than the traditional white in order to counteract the crystallization process of PE. Furthermore, the normal anti-UV additives have an antagonistic effect towards the flame retardant necessary for the product. In order to avoid this inconvenience, the sheath of SMISOL®Clim Platinum contains an ecological halogen-free flame retardant which does not counteract the anti-UV action. Tests carried out according to the ASTM G-155 standard (accelerated aging) demonstrate that SMISOL®Clim Platinum is suitable in areas with strong annual solar radiation . At the end of the exposure test, the sample did not show any signs of degradation


Accelerated Aging Test

The test provides for a duration of 4,000 hours of exposure in a weatherometer with a CI65 Xenon lamp which is equivalent in Kly to about 3 years of continuous exposure in Northern Italy or 2 years in Southern Italy


Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Copper Pipe Smisol Clim Platinum Schubes For Air Conditioning 50 Meters Thickness 1.0 Mm With Diameter 1/4 - 3/8 - 1/2 3/8"

Product form

Technical features Dimensions Outer Diameter : 6,35mm (1/4") - 9,52mm (3/8") - 12,70mm (1/2) Thickness : 1.0mm Roll length :... Read more

€240,00 Incl. VAT

    Description

    Technical features

    • Dimensions Outer Diameter : 6,35mm (1/4") - 9,52mm (3/8") - 12,70mm (1/2)
    • Thickness : 1.0mm
    • Roll length : 50m
    De : Outside diameter
    Sp : Thickness
    Minimum Coating Thickness
    • Minimum Coating Thickness 1/4 : 6 mm
    • Minimum Coating Thickness 3/8 : 8 mm
    • Minimum Coating Thickness 1/2 : 10 mm
    Burst Pressure
    • Burst Pressure 1/4 : 70.68 MPa
    • Burst Pressure 3/8 : 47.14 MPa
    • Burst Pressure 1/2 : 35.34 MPa
    Operating pressure
    • Working Pressure 1/4 : 17.67 MPa
    • Working Pressure 3/8 : 11.79 MPa
    • Working Pressure 1/2 : 8.83 MPa

    Water content

    • Water Content 1/4 : 0.015 l/m
    • Water Content 3/8 : 0.044 l/m
    • Water Content 1/2 : 0.090 l/m

    SMISOL®Clim Platinum The climate specialist

    It is the copper pipe produced according to the EN 12735-1 standard, and is pre-insulated in closed cell expanded polyethylene of regular dimensions and uniformly distributed (UNI EN 14114). It is distributed in rolls. The diameter of the copper pipe, as required by the EN 12735-1 standard, is expressed in inches. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective film in polyethylene aimed at preventing the formation of condensation on the external wall of the product. SMISOL®Clim Platinum is also characterized by particularly low eccentricity values, a very important feature for flaring operations.


    Inner surface

    The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the system.

    The particular internal cleanliness of SMISOL®Clim Platinum is safeguarded by closing the ends of each roll with caps, directly during production


    Coating Features

    • Thermal conductivity: l≤ 0.040 W/m°C
    • Average value of the resistance factor to the diffusion of water vapor "μ" > 15,000
    • Average density of the coating: 30 kg/m3
    • Free from ammonia residues
    • Excellent resistance to external chemical agents
    • Non flammable class 1 (DM 26/06/84)
    • Behavior in fire: BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84)
    • Free from CFC and HCFC (Reg. EEC/EU 2037/2000)
    • Pigmentation of the outer film “Silver grey”
    • Greater resistance to UV rays
    • Halogen-free flame retardant

    Smisol


    Fields of Use

    • Conditioning
    • Transport of refrigerant gases. (R32, R410A, R407,...)

    In compliance with and within the limits established by the regulations.


    External Protection

    Covering in closed cell expanded polyethylene with an average value of the resistance factor to the diffusion of water vapor "μ" greater than 15,000 . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which imposes the use of expanded insulating sheaths without the use of CFC and HCFC, gases harmful to health and the environment and has a fire behavior class BLs1d0 (EN 13501-1) and class 1 (DM 26/06/84). The outer polyethylene film contains a darker pigment than the traditional white in order to counteract the crystallization process of PE. Furthermore, the normal anti-UV additives have an antagonistic effect towards the flame retardant necessary for the product. In order to avoid this inconvenience, the sheath of SMISOL®Clim Platinum contains an ecological halogen-free flame retardant which does not counteract the anti-UV action. Tests carried out according to the ASTM G-155 standard (accelerated aging) demonstrate that SMISOL®Clim Platinum is suitable in areas with strong annual solar radiation . At the end of the exposure test, the sample did not show any signs of degradation


    Accelerated Aging Test

    The test provides for a duration of 4,000 hours of exposure in a weatherometer with a CI65 Xenon lamp which is equivalent in Kly to about 3 years of continuous exposure in Northern Italy or 2 years in Southern Italy


    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 1.0 kg
    • marca: SCTubes
    • modello: Smisol Clim Platinum 1,0
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account