ATTENTION OFFER VALID UNTIL STOCKS LAST
Technical features
Indoor unit catalog code : AS35S2SN2FA
Indoor unit commercial code: 2501302S2
Outdoor unit catalog number : 1U35S2SQ1FA
Outdoor unit Commercial Code: 2502302S2
Power : 12000 Btu
Integrated Wi-Fi
Energy efficiency
SEER : 7.8
SCOP: 4.6
Energy Efficiency Class in Cooling : A++
Heating Energy Efficiency Class: A++
Annual Energy Consumption in Cooling : 158 kWh/a
Annual Energy Consumption in Heating: 854 kWh/a
Performance
Cooling Capacity: 3.5 kW
Heating Capacity: 4.5 kW
Cooling absorption: 0.9 kW
Heating absorption: 1.1 kW
Treated Air Internal Unit: 650 m 3 /h
Sound Power Level Indoor Unit : 56 dB(A)
Sound Power Level Outdoor Unit : 61~62 dB(A)
Sound Pressure Level Indoor Unit : 22~38 dB(A)
Sound Pressure Level Outdoor Unit : 48~49 dB(A)
Electrical data
Power supply (V,Hz, Ø) : 220~240/50/1
Refrigerant gas : R32
Operating range
- Cooling: -10° ~ 43°C
- Heating: -15° ~ 24° C
Installation data
Pipe diameter Liquid : 6.35 mm (1/4")
Gas pipe diameter: 9.52 mm (3/8")
Maximum piping length: 15 m
Maximum height difference Indoor Unit / Outdoor Unit: 10 m
Dimensions and weight
Internal Unit Dimensions (LxPxH): 855x200x280 mm
Indoor Unit Weight: 10 Kg
External Unit Dimensions (LxPxH): 864x290x597 mm
Weight of Outdoor Unit: 29 Kg
Haier NEBULE GREEN White
Wi-Fi Control
The Wi-Fi module was designed to be a USB plug-in, easy to install. Thanks to Wi-Fi you have the possibility to control the air conditioner remotely. It only takes 3 steps to connect the air conditioner to the Wi-Fi module.
Efficiency
Energy efficiency allows higher performance with lower consumption. Lower?energy?consumption?> greater?saving. Greater attention to the environment.
3M filter
3M filter captures micro particles of dust and allergens (< 0.3µm) to provide clean and sanitized air
Characteristics
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
ATTENTION ! The support feet are to be purchased separately.
OFFER Floor-standing Aermec fan coil for heating only FCX82AS 13.5 kW without control panel.
*Compatible with VMF System
Technical features
Model : FCX82AS
Installation : on the floor
Compatible with the Vmf system
Performance
Thermal power at 70°C: 13.35 kW
Water flow rate : 1171 l/h
Load losses : 16 kPa
Thermal power at 50°C: 6.86 kW
Water flow rate : 860 l/h
Load losses : 12 kPa
Thermal power at 45°C: 6.64 kW
Water flow rate : 1152 l/h
Load losses : 16 kPa
Air flow rate : 700 ~ 920 m 3 /h
Sound power level : 51 ~ 62 dB(A)
Sound pressure level : 43 ~ 54 dB(A)
Electrical data
Power supply (V,Hz, Ø): 230V~50Hz
Power Consumption: 52~106W
Absorbed current : 0.49 kW
Installation data
Standard Coil Fitting Diameter : (3/4")
Additional coil fittings diameter : (1/2")
Dimensions and weight
Dimensions without feet (HxWxD): 688x1320x220 mm
Weight : 34.0 Kg
General characteristics:
Aermec FCX-A Efficient, silent and reliable fan coils
Aermec fan coils: a combination where the company and the brand identify the products and vice versa. In this air conditioning sector Aermec is synonymous with a leader: a primary company in Italy and at the top in Europe. A position that comes from many years of experience and which has been consolidated year after year.
Wide range
The range consists of 16 sizes for various versions, which allow for extreme installation versatility. The complete line of accessories satisfies any customization need.
All the units have been designed taking advantage of Aermec's many years of experience, acquired through daily contact with operators in the sector. Aermec fan coils are in fact designed to make their insertion into the impact and their installation as easy as possible. Furthermore, their reliability is constant, guaranteed by Aermec's many years of experience.
Efficient heating
Unlike other types of radiators, the low operating inertia means that the fan coils react immediately to variations in air temperature. This produces constant room temperature as conditions vary and significant energy savings, because it avoids releasing heat into the room when it is not needed. At the same time, a stepless control of the feed water temperature prevents annoying cold drafts in the winter
Maximum silence
FCX respects the finest hearing because it works with silence at the top of its category: no clicking or clicking of mechanical organs.
Attention to health and air quality
The only one of its kind, the Aermec convector, in version A, is now available with the Plasmacluster device, an exclusive system that eliminates bacteria, viruses, moulds, mites, pollen and dust. The Plasmacluster purifier restores the correct balance between positive and negative ions in closed environments, refreshes the air and guarantees an ideal condition for a healthy life. Asthma, dermatitis and other respiratory problems are often caused by pollution, dust mites, pollen and pet dander. Plasmacluter guarantees perfect sanitation of the air in closed environments, thus constituting a valid aid against the spread of allergens. FCX maintenance is reduced to periodic cleaning of the air filter, which can be done by easily removing the filter and washing it in running water.
Speed and savings
The FCX fan coil quickly brings the perfect temperature and healthier, cleaner air at the right humidity level, both in summer and winter. Constant control of the temperature in the room is ensured by the ambient probe positioned on the cover cabinet. This allows you to adjust the temperature room by room, realizing high energy savings.
Safety
Full compliance with accident prevention regulations: the CE mark, the absence of sharp edges, no moving parts that can be reached by accident, the electrical connections in double insulation, the impossibility for the external parts to reach dangerous temperatures, make the operation of the fan coils Aermec absolutely safe in any type of environment, both residential and industrial.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
COMPLETE WITH CM-F ON/OFF CABINET SWITCH
FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 100 + free CM-F switch
Max-min cooling capacity: 6100-4400 W
Max-min heat output: 14900-9600W
Dehumidification: 2100g/h
Max-min air flow: 1200-670 m3/h
No. of fans: 2
Max-min sound power: 61-49 db(A)
Max-min sound pressure: 52-40 db(A)
3R main battery connections: 3/4"
1R extra battery connections: 1/2 "
Water content batt.3R: 2.42 l
Water content batt.1R: 0.64 l
Power supply: 230-1-50 [VF-Hz]
Dimensions (HxWxD): 554+100 x 1440 x 220 mm; 34kg
Notes :
Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow as in maximum speed.
Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed.
TOP FAN PLUS
Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season.
Series with centrifugal fan, available in 9 sizes and three versions:
VM-B with casing for vertical and horizontal installation and suction from below
VM-F with casing for vertical and horizontal installation and front suction
VN without casing for vertical and horizontal installation
Characteristics:
Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel
Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops
Air filter easy to remove and clean, regenerable by washing or blowing
Fan unit with three-speed motor and aluminum impellers
Wide range of controls both to be installed on the machine and remote on the wall
SWITCH:
It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed.
Available in two different versions:
- for installation on CM-F cabinet
- for CMR-F remote installation
Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat.
NEW (OPTIONAL)
REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions:
Switching on\Switching off
Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-)
Fan speed (Max/Med/Min/Auto)
Set point temperature
Timer setting
°C or °F temperature scale setting
VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company.
WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
OFFERTA VALIDA FINO AD ESAURIMENTO SCORTE
Caratteristiche tecniche
Codice catalogo unità interna : MCD-48FNXD0
EAN : 8033638103319
Codice griglia : T-MBQ-02M4
EAN : 8052705160352
Codice catalogo unità esterna : MOU-48FN8-RD0
EAN : 8033638103401
Potenza : 48000 Btu/h
Telecomando incluso
Performance
Capacità raffreddamento : 14,07 kW
Capacità riscaldamento : 16,12 kW
Assorbimento raffreddamento : 0,513 kW
Assorbimento riscaldamento: 0,5050 kW
Aria trattata unità interna : 1380~1568~1715 m3/h
Livello potenza sonora unità interna : 65 dB(A)
Livello potenza sonora unità esterna : 72 dB(A)
Livello pressione sonora unità interna : 49~50~52 dB(A)
Livello pressione sonora unità esterna : 66 dB(A)
Dati elettrici
Alimentazione (V,Hz,Ø) : 380~415/50/3
Gas refrigerante : R-32
Intervallo di funzionamento - Raffreddamento: -15° ~ 50° C- Riscaldamento: -15° ~ 24° C
Dati installativi
Diametro tubazioni liquido : 6,35 mm (1/4")
Diametro tubazioni gas : 15,88 mm (5/8")
Lunghezza massima tubazioni : 65 m
Dislivello massimo tra unità interna ed unità esterna : 30 m
Dimensioni e peso
Dimensioni unità interna (LxPxA) : 840x840x287 mm
Peso unità interna : 29,0 Kg
Dimensioni griglia (LxPxA) : 950x950x55 mm
Peso griglia : 5,0 Kg
Dimensioni unità esterna (LxPxA) : 952x415x1333 mm
Peso unità esterna : 106,7 Kg
Climatizzatore Midea commerciale R-32 Cassetta 4 vie slim
Il gruppo Midea è stato tra le prime azienda ad introdurre nei suoi prodotti l’utilizzo di refrigeranti a basso indice GWP (Global Warming Potential) per contrastare gli effetti del surriscaldamento atmosferico e del temuto «Effetto Serra» Questo cambiamento avviene anni prima che le normative impongano l’abolizione dei refrigeranti tradizionali, a testimonianza dell’attenzione che Midea pone nella sostenibilità ambientale.
Basso indice GWP Grazie al ridotto valore dell’indice GWP (675), il refrigerante R32 è caratterizzato da emissioni di CO2 equivalente notevolmente inferiori a quelle degli altri refrigeranti HFC.
Risparmio energetico Test comparativi evidenziano come, a parità di condizioni, il nuovo refrigerante R32 garantisca un efficienza specifica del 2% superiore rispetto al R410A
Semplicità d'installazione La gamma delle nuove unità interne Midea può essere collegata, oltre che alle unità esterne R32, anche alle unità etsrene R410A della serie precedente, a tutto vantaggio della semplicità di gestione
Cassetta 4 vie
Pompa Sollevamento CondensaLe unità interne Cassette 4 vie Midea sono dotate di una pompa di sollevamento del liquido di condensa che permette di scaricare ad un’altezza di 600 mm di elevazione rispetto alla vaschetta.Diffusione dell’Aria a 360°Le unità interne cassette 4 vie sono dotate di pretranciati per la canalizzazione delle bocche di mandata e di una presa per immissione aria di rinnovo, direttamente collegata al condotto di aspirazione della macchina.
Comando Remoto On/Off e Segnale AllarmeOn/Off remoto: con una morsettiera dedicata, può essere facilmente collegato un interruttore per il controllo dell’unità da un dispositivo esterno. Allarme: la scheda può emettere un segnale di allarme al quale può essere abbinato a un dispositivo di segnalazione esterno.
Combinazione "Twin"Le unità interne a cassetta 4 vie 90 x 90 cm possono essere installate in modalità “Twin”: un’unica unità esterna commerciale può connettersi con due unità interne allargando lo scenario delle installazioni possibili. Disponibile nelle combinazioni: 18k+18k, 24k+24k, 30k+30k
Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
ATTENTION ! OFFER VALID UNTIL STOCKS LAST
FIRST START UP INCLUDED!
Technical features
Thermal power (air +7°C (bs) / +6°C (bu) and delivery temperature of +35°C - EN 14511): 4.65 kW
COP: 5.00
Cooling capacity (air +35°C (bs) and delivery temperature +7°C - EN 14511): 4.60 kW
EER: 2.98
SEER: 4.71
R32 refrigerant charge: 2.00 kg
Number/type of compressors: 1/rotary DC inverter
Number of fans: 1
Nominal water flow (winter operation): 0.80 m³/h
Circulation pump useful head: 55 kPa
Inlet/outlet hydraulic connections: 1” male / 1” male
Power supply voltage: 230V 1P+N+T
Power supply frequency: 50Hz
Overall dimensions H x W x D: 945mm x 1210mm x 402mm
Weight: 92kg
Sound power: 61dB(A)
Sound pressure at 1 meter in free field on a reflective surface: 48.8 dB(A)
BAXI AURIGA Inverter Monobloc Air-Water Heat Pumps
Baxi introduces Auriga , the range of inverter packaged air-to-water heat pumps with single-phase and three-phase power supply. The range is characterized by the ease and simplicity of installation . Furthermore, the increased head of the on-board circulator allows the unit to be installed in large-scale systems, to cover greater distances from the heating plant or to install the unit directly to serve the fan coils. The range is wide and consists of 8 models from 4 to 16 kW, single-phase and three-phase versions
Wide range of powers from 4 to 16 kW to satisfy all system requirements: heating, cooling and DHW production
Easy to install in various living contexts, the increased head pump allows you to cope with greater pressure drops such as large systems or directly serving the fan coils
STANDARD complete hydraulic equipment circulation pump, flow switch, expansion tank, safety valve, pressure gauge and “Y” filter
Remote control panel control of system functions, programming and parameter verification. Furthermore, the connection via Modbus allows integration with BMS systems
ErP Energy Labeling the labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A+++ to D (in heating) and from A+ to F (in sanitary). The 5M/7M/9M models achieve an efficiency of A+++ in low temperature heating
Components
> Twin rotary DC inverter compressor : complete with internal thermal protection and crankcase heater, it is mounted on vibration dampers and wrapped around an insulating cap to reduce the transmission of noise and vibrations due to operation
> Water-refrigerant exchanger : with brazed plates in AISI 316 steel with external anti-condensation insulation in expanded polypropylene and antifreeze resistance to prevent the formation of ice in the exchanger
> Air-refrigerant exchanger : finned aluminum coil with hydrophilic treatment to facilitate the outflow of the condensate, mechanically expanded copper pipes with internal shaping to increase the heat exchange Furthermore, the optimized circuitry reduces the formation of ice in the coil during heat pump operation
> Fan : axial fan directly coupled to the high efficiency brushless DC variable speed motor. The fan is installed on aerodynamic nozzles and safety grilles
> Refrigerant circuit : made of pickled copper, it includes the electronic expansion valve, drier filters, high and low pressure switches, pressure transducer, cycle inversion valves, liquid receiver and separator, refrigerant injection valve on the suction side
> Hydraulic circuit : in addition to the brazed plate heat exchanger, the unit includes the high head circulator, the expansion vessel, the safety valve, the flow switch, the pressure gauge and the air vent valve and the metal mesh Y-filter (assembly by the installer)
> Electrical panel : includes fuse protection of the main internal components; the terminal block is divided into a power section for supplying the unit and a control terminal block for connecting auxiliary inputs and outputs and connection to the control panel
Main Features BAXI AURIGA
Maximum energy efficiency
Monobloc system for the production of heating, cooling and DHW
Wide operating range, with external air down to -25°C in heating, up to 46°C in cooling
DHW system management: production up to 60°C, storage tank temperature management, DHW recirculation pump and solar thermal integration
Suitable for integration with radiant terminals, fan coils and mixed systems
Integrated management with various plant systems: boiler integration, solar integration, management of diverter valves and secondary circuit pump
Single-phase and three-phase power supply
Compressor with DC inverter technology with high modulation range
Modbus network connection
Low GWP R32 refrigerant
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
OFFER VALID UNTIL STOCKS LAST
Technical features
Model : AUDAX 18
Code 3.025563
Energy efficiency
COP 4.40
EER 4.35
Energy efficiency class: A+ / A+
Performance
Useful heating power: 17.14 kW
Useful cooling power: 19.83 kW
Electrical data
Power supply (V,Hz, Ø) : 380~415/50/3
Refrigerant gas : R410A
Dimensions and weight
Dimensions (HxWxD): 1579x1109x584
Weight : 199.0 Kg
Immergas AUDAX inverter air-water heat pump
The large range of Immergas heat pumps is designed to create integrated or hybrid systems that use renewable energies to offer great comfort, reduce consumption and harmful emissions, comply with the new standards. With the addition of photovoltaic panels, especially useful for heat pump only systems, even greater advantages are obtained. For this reason, all Immergas products are equipped with a photovoltaic contact and make the most of the sun's energy in heating and cooling (with split and monobloc versions) and in water heaters that only produce domestic hot water. AUDAX is the name of the air/water monobloc versions indicated for all system solutions: 4 are the single-phase versions, for homes, of 6, 8, 12 and 16, and 3 are the three-phase versions, for commercial environments and offices, of 16, 18 and 21 kW.
Low consumption: thanks to inverter technology , electricity consumption decreases and performance remains high in favor of greater domestic comfort.
Storage tank: in combination with a separate storage unit it can produce domestic hot water.
Silent operation: low sound impact thanks to special technical solutions.
Standard control panel: allows management of the heat pump from any room in the home.
High seasonal yields: ideal for air conditioning environments both in winter heating (maximum temperature 60 °C) and in summer cooling (in combination with fan coils or radiant panels combined with dehumidifier).
Formula Comfort HYBRID: makes use of the most complete maintenance program which allows the conventional guarantee to be extended to 5 years which, in collaboration with the Immergas Authorized Assistance Centre, can be activated during the initial check.
Eco-friendly technology: uses the outside air as a source of renewable energy.
Renewable energies: combinable with hybrid and integrated systems for systems of great domestic comfort , it satisfies the new regulatory requirements.
Versatile: it can work individually, in combination with integrated systems with boiler or in series for solutions in centralized systems.
Positioning: Approved for outdoor, open-air operation. IPX4 electrical protection.
Simple user interface The control panel, supplied as standard, in addition to displaying the operating diagnostics, also acts as a weekly thermostat for heating/cooling management with room temperature/humidity sensor function in stand-alone applications. Easy to connect, two BUS-type cables are sufficient which allow the exchange of information and two cables for the power supply to be connected to the AUDAX and, therefore, it does not require power batteries. The control panel allows you to:
Program comfort/economy room temperature
Set time slots and climatic curve in both heating and cooling
View heat pump error codes
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
Climatizzatore Condizionatore LG Soffitto Inverter 36000 Btu UV36R/UUD1 Monofase R-32 Wi-Fi Optional
Caratteristiche Tecniche
Codice catalogo unità interna : UV36R N20
Codice catalogo unità esterna : UUD1.U30
Potenza: 36000 btu
Efficienza Energetica
SEER : 6,3
SCOP : 4,1
Classe di Efficienza Energetica in Raffreddamento : A++
Classe di Efficienza Energetica in Riscaldamento : A+
Consumo Energetico annuo in Raffreddamento : 545 kWh/a
Consumo Energetico annuo in Riscaldamento : 1833 kWh/a
Performance
Capacità Raffreddamento : 9,5 kW
Capacità Riscaldamento : 10,8 kW
Assorbimento Raffreddamento : 2.30 kW
Assorbimento Riscaldamento : 2,75 kW
Livello Potenza sonora Unità Esterna : 66 dB(A)
Livello Pressione sonora Unità Interna : 46 / 43 / 40 dB(A)
Livello Pressione sonora Unità Esterna : 50 dB(A)
Dati Elettrici
Alimentazione (V,Hz, Ø) : 220~240/50/1
Gas refrigerante : R32
Intervallo di funzionamento
- Raffreddamento: -20° ~ 52° C
- Riscaldamento: -25° ~ 18° C
Dati Installativi
Diametro tubazioni Liquido : 9,52 mm (3/8")
Diametro tubazioni Gas : 15,88 mm (5/8")
Lunghezza massima Tubazioni : 85 m
Dimensioni e Peso
Dimensioni Unità Interna (LxAxP) : 1.600 x 690 x 235mm
Dimensioni Unità Esterna (LxAxP) : 950x1380x330 mm
Peso Unità Esterna : 85 Kg
Soffitto LG
Design innovativo
Con la sua innovativa forma a V e le alette nere, la nuova unità interna a soffitto si distingue per un’eleganza adatta a tutti gli spazi. L’estetica di prodotto così curata è stata premiata con l’If Design Award.
Filtro One Touch a due sezioni La composizione del filtro in due parti permette di inserirlo ed estrarlo in modo semplificato. Grazie a questo, pulizia e manutenzione risultano estremamente semplificate
Controllo a doppio termistore
In caso di utilizzo del comando a filo, la temperatura ambiente presente nei locali, può essere rilevata in 3 differenti modalità:
- dal sensore posto nel comando a filo. - dal sensore presente sull’unità -da entrambi i sensori, utilizzando come valore di riferimento il minore tra i due rilevati. Il controllo combinato a doppio termistore è in grado di ottimizzare la temperatura dell’aria interna, per un ambiente più confortevole
Installazione semplificata Installazione facile e veloce migliorata grazie alla riduzione del numero di viti usate, posizionate in modo tale da rendere accessibile il pannello frontale.
Controllo Temperatura a Dopo Termistore
In caso di utilizzo del comando a filo, la temperatura ambiente presente nei locali può essere rilevata in 3 differenti modalità:- dal sensore posto nel comando a filo- dal sensore presente sull’unità- da entrambi i sensori, utilizzando come valore di riferimento il minore tra i due rilevatiIl controllo combinato a doppio termistore è in grado di ottimizzare la temperatura dell’aria interna, per un ambiente piùconfortevole.
Unità Esterna
• Struttura autoportante in pannelli di lamiera d’acciaio zincato verniciati di colore grigio caldo con trattamento superficiale e processo di Cataforesi un trattamento superficiale in grado di conferire una notevole resistenza alla corrosione al fine di protegge l’unità esterna dagli agenti atmosferici
• Pannello anteriore destro asportabile per operazioni di connessione con il circuito frigorifero con maniglia integrata per facilitare il trasporto e il posizionamento dell’unità
• Coperchio superiore asportabile per accedere ai componenti di comando con maniglia integrata sul lato destro per facilitare il trasporto e il posizionamento dell’unità
• Griglia di protezione sull’espulsione dell’aria
Scambiatore di Calore
Scambiatore di calore esterno Wide Louver Fin che conferisce un miglioramento dell’ efficienza di scambio in più rispetto ad un tradizionale scambiatore , in tubo di rame corrugato con alettature a pacco in alluminio, rivestito da un trattamento anticorrosione a bagno galvanico Black Fin per conferire una migliore resistenza alle piogge acide e alla salsedine nelle zone di mare. .Prese d’aria protette da rete a maglia quadra dello stesso colore dell’ unità esterna. Protezione della sonda di rilevazione aria in alloggiamento dedicato
Compressore
Sistema di erogazione della capacità composto da N°1 Compressore ermetico di tipologia Twin Rotary Dc inverter ad avviamento diretto,. controllo lineare della capacità con un campo di azione compreso tra il minimo del 10% fino ad un massimo del 130%
Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
The product is available on order
Technical features
Indoor unit catalog code : PEAD-M125JA
Outdoor unit catalog code : PUZ-ZM125VKA
Power: 42000 btu
Optional Wi-Fi card : MAC-567IF-E
Optional commands
Optional remote control : PAR-FL32MA-E
Optional Infrared Receiver: PAR-FA32MA-W
Optional Simplified Wired Control : PAC-YT52CRA-K
Optional Deluxe Wire Control : PAR-40MAA
White Prism Remote Control : PAR-CT01MAA-SB
Black Prism Remote Control : PAR-CT01MAA-PB
Energy efficiency
SEER : 235.8%
SCOP: 153.2%
Energy Efficiency Class in Cooling : -
Heating Energy Efficiency Class : -
Annual Energy Consumption in Cooling : 754 kWh/a
Annual Energy Consumption in Heating: 3335 Kwh/a
Performance
Cooling Capacity: 12.5 kW
Heating Capacity: 14.0 kW
Cooling absorption: 3.333 kW
Heating absorption: 3.349 kW
Treated Air Indoor Unit : 29,5~42 m 3 /min
Sound Power Level Indoor Unit : 66 dB(A)
External Unit Sound Power Level: 70 dB(A)
Sound Pressure Level Indoor Unit : 33~40 dB(A)
Sound Pressure Level Outdoor Unit : 50 dB(A)
Electrical data
Power supply (V,Hz, Ø) : 220~240/50/1
Refrigerant gas : R32
Operating range
- Cooling: -15° ~ 46° C
- Heating: -20° ~ 21° C
Installation data
Pipe diameter Liquid : 6.35 mm (1/4")
Gas pipe diameter: 15.88 mm (5/8")
Maximum pipe length: 100 m
Maximum height difference Indoor Unit / Outdoor Unit: 30 m
Dimensions and weight
Internal Unit Dimensions (HxWxD): 250x1400x732 mm
Indoor Unit Weight: 43 Kg
External Unit Dimensions (HxWxD): 1338x1050x330 mm
Weight of Outdoor Unit: 116 Kg
Mitsubishi Electric Ducted Medium Head PEAD-M JA
Cost-effectiveness and installation flexibility
The indoor units of this series of air conditioners, with low profile and concealed in the ceiling, are the perfect answer for the air conditioning requirements in the presence of very small ceiling installation space and external static pressure values subject to wide variations. Energy efficiency has been optimised, electricity consumption is reduced and the operating costs of the appliance are therefore lower.
The ultra-slim indoor unit is characterized by particularly quiet operation. It is equipped with a direct expansion coil. It is suitable for concealed ductable installation. A height of only 250 mm guarantees cost-effectiveness and installation flexibility
Extremely Quiet Operation
In addition to the innovative silent features already present on other Mitsubishi Electric air conditioners, the PEAD series employs a sirocco-type fan with extremely silent operation
Condensate Drain Pump Included
The HDPE series units are not only easy to install but also The provision of a drain pump with a head of 550 mm facilitates the drainage of condensate water even in critical conditions
DC Inverter fan
The HDPE units are equipped with a DC Inverter fan which allows the modulation of the number of revolutions ensuring, in addition to silence, optimal comfort and energy saving
Static Pressure Settable
External static pressure can be adjusted to suit system configuration and installation conditions. Static pressure settings can be increased to suit all duct types, having 5 steps available from 35 Pa up to 150 Pa
Various Installation Possibilities
HDPE series units are not only easy to install but also very versatile. It is possible to vary the position for the air intake, rear or lower , to optimize the space available
MELCloud, the Wi-Fi control
MELCloud is the new Wi-Fi control for your Mitsubishi Electric system. Taking advantage of the support of the cloud, the "Cloud", to transmit and receive information and the optional dedicated MAC-567IF-E Wi-Fi interface, you can easily control your system wherever you are via PC, tablet or smartphone ; all you need is an internet connection. The MELCloud service was created to have maximum compatibility with PCs, tablets and smartphones thanks to dedicated apps or via a web browser.
One word is enough for you!
MELCloud is compatible with Google Home. Saying «Hey Google!», or «Ok Google!» you have full control of the climate system. MELCloud is compatible with Amazon Alexa. A word will be enough to freely manage your air conditioning units
R32 Power Inverter outdoor units
The new R32 Power Inverter Commercial range outdoor units offer numerous advantages.
High seasonal efficiency : The use of R32 refrigerant guarantees an increase in seasonal efficiency in cooling
Increased piping length : Increased installation flexibility for sizes 60-140 thanks to increased piping length
Nominal heating capacity down to -3°C : Nominal capacity is maintained down to -3°C, making it easier to use in cold climates
• Compatibility with fan motor for head
• MelCloud energy monitoring
Power Inverters
Energy efficiency finds its maximum expression in the Power Inverter series. The wide operating range and maximum installation flexibility, thanks to particularly long refrigerant lines and the possibility of reusing existing pipes, complete the offer. The Power Inverter Units are equipped with innovative Power Receiver technology and rotary compressors to obtain maximum efficiency
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
Climatizzatore Condizionatore Inverter LG DELUXE 9000 btu R-32 Nano UV Wi-Fi Integrato Voice Control DC09RK+DC09RT A++/A++
Caratteristiche tecniche:
Codice catalogo unità interna: DC09RT NSJ
Codice catalogo unità esterna: DC09RT UL2
Tipo: A parete
Colore: Bianco
Raffreddamento
Efficienza stagionale SEER: 7,9
Classe di Efficienza Energetica : A++
Consumo energetico annuo: 111 kWh
Riscaldamento
Efficienza stagionale SCOP: 4,6
Classe di Efficienza Energetica A++
Consumo energetico annuo: 852 kWh
Performance:
Capacità deumidificazione l/h: 1,1
Capacità raffreddamento nominale: 2,5 kW
Capacità riscaldamento nominale: 3,2 kW
Potenza assorbita raffreddamento nominale: 572 W
Potenza assorbita riscaldamento nominale: 711 W
Pressione sonora unità interna Max-Med-Min-Sleep: 48-42-27-19 dBA
Potenza sonora unità interna Alta: 60 dBA
Pressione sonora unità esterna Alta: 51 dBA
Potenza sonora unità esterna Alta: 65 dBA
Caratteristiche:
Alimentazione (V/Hz/Φ) : 230/50/1
Gas refrigerante : R-32
Attacchi tubazioni Liquido/Gas: 6.35/9.52 mm
Lunghezza Max. Tubazioni: m 20
Dislivello Max.UIUE: m 10
Campo di funzionamento:
Raffrescamento Ambiente Min.~Max: ? -15 ~ +48
Riscaldamento Ambiente Min.~Max.: °C -15 ~ +24
Dimensioni
Dimensioni unità interna L x A x P (mm) 837 x 308 x 189
Peso unità interna (kg) 9.1
Dimensioni unità esterna L x A x P (mm) 770 x 545 x 288
Peso unità esterna (kg) 34.1
DELUXE
Sistema UVnanoLe unita’ interne sono dotate del nuovo sistema UV NANO La nuova tecnologia UV LED "Uvnano" viene applicata a LG Artcool e mantiene la ventola (all'interno dell'unità) priva di batteri al 99,99% grazie alla luce ultravioletta per garantire che anche l'aria che passa sia pulita.
Sistema di Ionizzazione Plasmaster
Unità interna dotata di Ionizzatore ad emissione di ioni negativi in funzione al grado di PM misurato dal rilevatore. Il led verde identifica la sua accensione ed emissione di ioni.
Filtro anti-allergeni
Riduce gli allergeni per un'aria più sana
Elimina le sostanze che causano allergie, come gli acari della polvere, che sono in sospensione nell'aria.
PrefiltroIntrappola le particelle di polvere di grandi dimensioni.La prima linea di difesa che Intrappola le particelle di polvere di dimensioni maggiori.
Auto Cleaning
Pulizia interna automatica
Asciuga automaticamente l’umidità all’interno del condizionatore per garantire che sia sempre pulito
Wi-Fi INTEGRATO
Unità interna con Wi-Fi integrato per gestire le principali funzioni attraverso la app Smart ThinQ disponibile per Android o iOS.
Voice Control
Unità interna compatibile con gli assistenti vocali Google Home . Funzioni disponibili :
Accensione
Spegnimento
Regolazione temperatura
Impostazione modalità operative
Regolazione ventilazione
Monitoring
Controllo Attivo delle capacità
Controllo dei consumi energetici a 4 step tramite pulsante posto sul comando ad infrarosso.
NORMALE 100% DI CONSUMO : Locale con più persone,con grado di attività elevato.
STEP1 80% DI CONSUMO : Locale con più persone,con grado di attività ridotto.
STEP2 60% DI CONSUMO : Locale con poche persone,con grado di attività ridotto.
STEP2 40% DI CONSUMO : Locale con poche persone,con grado di attività molto ridotto
Consumo energetico facile da monitorare
Vivi un ambiente in cui dormire nel massimo comfort grazie alle funzioni di regolazione automatica del flusso d'aria*. *Quando la funzione comfort sleep è attivata.
Un ambiente in cui dormire nel massimo comfort
Previeni l’inquinamento ambientale grazie all’efficienza energetica migliorata del refrigerante R32.
Refrigerante ecologico
Il display ti tiene informato per poter monitorare e ridurre facilmente il consumo di energia*. *Consumo energetico durante il funzionamento del climatizzatore. 10 anni di garanziaCon una garanzia di 10 anni, il compressore manterrà le sue migliori prestazioni più a lungo.
Caratteristiche Tecniche
Codice catalogo unità interna : AC09BK.NSJ
Codice catalogo unità esterna : AC09BQ.UA3
Potenza : 9000 Btu
Efficienza Energetica
SEER : 7.0
SCOP : 4.0
Classe di Efficienza Energetica in Raffreddamento : A++
Classe di Efficienza Energetica in Riscaldamento : A+
Consumo Energetico annuo in Raffreddamento : 125 kWh/a
Consumo Energetico annuo in Riscaldamento : 875 kWh/a
Performance
Capacità Raffreddamento : 2,5 kW
Capacità Riscaldamento : 3,3 kW
Assorbimento Raffreddamento : 0,66 kW
Assorbimento Riscaldamento : 0,80 kW
Livello Potenza sonora Unità Interna : 59 dB(A)
Livello Potenza sonora Unità Esterna : 65 dB(A)
Livello Pressione sonora Unità Interna : 19~41 dB(A)
Livello Pressione sonora Unità Esterna : 48~50 dB(A)
Dati Elettrici
Alimentazione (V,Hz, Ø) : 220~240/50/1
Gas refrigerante : R32
Intervallo di funzionamento
- Raffreddamento: -10° ~ 48° C
- Riscaldamento: -10° ~ 24° C
Dati Installativi
Diametro tubazioni Liquido : 6,35 mm (1/4")
Diametro tubazioni Gas : 9,52 mm (3/8")
Lunghezza massima Tubazioni : 15 m
Dislivello massimo Unità Interna / Unità Esterna : 7 m
Dimensioni e Peso
Dimensioni Unità Interna (LxAxP) : Dimensioni u.i mm 837 x 308 x 192 mm
Dimensioni Unità Esterna (LxAxP) : 717x483x230 mm
Peso Unità Esterna : 25,1 Kg
Compressore Dual Inverter garantito 10 anni
LG, che ripone grande fiducia nella qualità e affidabilità dei propri prodotti, offre 10 anni di garanzia sul compressore Inverter di tutti i modelli mono e multisplit presenti su questo catalogo. La garanzia sopra citata copre i costi della sola parte compressore Inverter per un periodo complessivo di 10 anni dalla data di acquisto del climatizzatore. Qualsiasi altro costo all’infuori del valore della sola componente sostituita è da ritenersi escluso dalla copertura.
LG ARTCOOL MIRROR Effetto Specchio
Tecnologie all’avanguardia, design rinnovato, funzionalità avanzate e Wifi intergrato, con gas refrigerante R-32.
Nuovo Refrigerante R-32
I nuovi climatizzatori LG utilizzano il gas refrigerante ecologico R32 che, grazie al suo ridotto potenziale di riscaldamento globale aiuta a perseguire la missione Europea per la protezione e la conservazione del nostro ambiente.
Stile ed Eleganza
Il design semplice e lineare dei climatizzatori LG garantisce installazione perfetta, ottima aderenza alla parete e facile pulizia del prodotto
Massima efficienza energetica
L’avanzata ed efficiente tecnologia Inverter di LG e le funzioni di risparmio energetico garantiscono performance di alto livello e minimi consumi.
Massima silenziosità e Silent Mode
L'esclusivo ventilatore Skew Fan, la tecnologia a basse vibrazioni del compressore e il motore di ventilazione BLDC a corrente continua hanno permesso ai climatizzatori LG di raggiungere uno dei più bassi livelli di rumorosità al mondo, garantendo ambienti più tranquilli con soli 19 dB(A).
La massima silenziosità dei climatizzatori LG garantisce comfort e quiete a tutta la famiglia, ma non solo. Abbiamo pensato anche a chi vi circonda: con la funzione Silent Mode, infatti, è possibile ridurre la frequenza di rotazione di compressore e ventilatore dell'unità esterna, abbassando il livello di potenza sonora di circa 3 dB(A) rispetto alla condizione di normale operatività. Questa funzione permette di diminuire significativamente le emissioni sonore dell'unità esterna, ad esempio durante il funzionamento nelle ore notturne, quando è necessaria una maggiore attenzione alle emissioni acustiche per il rispetto della quiete nel vicinato.
Jet cool
La funzione Jet Cool consente di far ruotare il compressore ad una velocità superiore alla massima normalmente disponibile, per permettere di raffreddare gli ambienti domestici abbattendo la temperatura interna fino a 5°C in soli 5,6 minuti. Jet Cool: un sollievo immediato anche nelle estati più calde.
Ionizzatore Plasmaster : aria sana e pulita
Lo ionizzatore Plasmaster, inserito all'interno del sistema di filtrazione, sviluppa oltre 2 milioni di ioni in grado di purificare l'aria, rendendo inattivi i più comuni batteri aerobi ed eliminando virus, germi e cattivi odori presenti nell'ambiente. Gli ioni Plasmaster sanificano non solo l'aria che passa attraverso il climatizzatore, ma anche le sostanze nocive e gli odori che circondano l'unità.
Compatibilità
LG introduce le nuove unità a parete, utilizzabili in configurazione mono e multisplit. La compatibilità consente di ottenere la massima capacità di raffrescamento e riscaldamento e, soprattutto, di poter integrare nella stessa applicazione sistemi diversi, preservando la continuità estetica delle unità interne.
Installazione semplificata
Installare un climatizzatore non è mai stato così facile! I prodotti LG sono progettati e realizzati per essere installati in modo veloce ed efficiente. E le ridotte dimensioni delle unità interne ed esterne assicurano anche un risparmio in termini di spazio.
Wi-Fi Integrato
Dove vuoi, quando vuoi! Controllare il tuo climatizzatore con le tecnologie Smart di LG, oggi è ancora più facile. Grazie al Wi-Fi integrato e ad una connessione Internet, potrai gestire le funzioni principali del tuo condizionatore attraverso l’applicazione per tutti gli smartphone Android o iOS
Garanzia Prodotto: Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
Technical features
Model: Indoor unit model : AC035MNNDKH/EU Outdoor unit model : AC035MXADKH/EU Ceiling tile code: PC4SUSMAN Wireless command code: MR-EH00 Product pluses: 360° air delivery with individually adjustable guide vanes Fan with inverter motor; provision for external air inlet Built-in condensate drain pump (up to 750 mmH2O) antibacterial filter included Communication with "Nasa" protocol; pre-cuts for secondary ducts Virus Doctor device (optional): effective against viruses, bacteria, dust, moulds, allergens. Power supply: Single-phase 220V - 50Hz Twin Rotary Inverter Outdoor Unit Compressor (except 2.6/3.5kW Single Rotary models) Possibility to connect 2-3-4 indoor units (twin-triple-quadri) WI-FI kit (optional) Energy efficiency: Seasonal efficiency: SEER: 6.8 SCOP: 4.3 Energy Efficiency Class (Cool) : A++ Energy Efficiency Class (Heating) : A+ Annual Energy Consumption In Cooling/Heating: 180/684 kW/a Performance: Cooling Capacity: 3.5 kW Std Capacity In Heating: 4.0 kW Cooling absorption 1.09 kW Heating absorption 1.2 kW Treated Air IU: 9.2 m³/min Sound Power Level IU dB(A): 50 EU Sound Power Level dB(A): 61 Characteristics: Food: 1.220-240.50 Refrigerant gas : R410A Liquid / Gas Pipe Diameter (inch): 6.35 (1/4") 9.52 (3/8") Piping length Max 20m Max height difference IU / UE : 15m Dimensions and weight: Indoor Unit WxHxD (mm): 575x250x575; 11.4kg Panel WxHxD (mm): 670x45x670 ; 2.7 Kg Outdoor Unit WxHxD (mm): 790x548x285 ; 32.8Kg With false ceiling panel and wireless control included
General characteristics Samsung Mini 4 Way Cassette
The Samsung 4-way Cassettes are developed to offer greater energy efficiency and an ultra-lightweight design without installation and maintenance problems
Onboard display
The on-board display identifies the operating status of the indoor unit.
Easy Cleaning
Each fin can be removed for cleaning without completely disassembling the grille.
Circular airflow
Thanks to further deflectors at the ends of each single fin, it is possible to have a 360° air distribution, for perfect coverage of the room
Single flap control
Using the wired control, each of the 4 flaps can be adjusted individually, within an angle between 32°-65°.
Easy Assembly
Using the wired control, each of the 4 flaps can be adjusted individually, within an angle between 32°-65°.
Secondary duct and fresh air inlet
A secondary channel can be connected to the cassette to cool/heat an adjacent room. It is possible to connect a duct to be used for the fresh outside air intake.
Presence sensor
(MCR-SMA optional accessory only for mini 4 ways)
On/off function The sensor detects the presence of people in the room and automatically turns the unit on/off, saving energy
Optimal air distribution The sensor automatically adjusts the inclination of each individual flap, based on the positioning of the people.
Air Speed and Installation Height Adjustment High
The optimal air speed can be adjusted with the remote control up to a maximum height of 3m.
In case of high installation height, it is possible to increase the air flow rate to have optimal coverage up to a maximum height of 4.6 m (only for 4-way cassette 12.8 - 14.0 kW).
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
Caratteristiche Tecniche
Modello :
Codice Catalogo Unità Interna : 2 x SDH20-035NWI
Potenza : 12000 btu
Dati Elettrici :
Raffreddamento
Potenza Raffrescamento : 3,5 kW
Potenza Massima : 3,81 kW
Riscaldamento
Potenza Riscaldamento : 3,81 kW
Potenza Massima : 4,4 kW
Caratteristiche
Portata D'Aria : 390 / 680 m³/h
Pressione Sonora : 25 / 43 db(A)
Potenza Sonora : 40 / 58 db(A)
Collegamento Tubazioni : 1/4 - 3/8
Dimensioni e Peso :
Dimensioni : 295 x 865 x 210
Peso : 11 Kg
Unità Esterna
Modello : SDH20-070MC3NO
Alimentazione Elettrica V/Ph/Hz : 230/1/50
Gas Refrigerante : R-32
Potenza Sonora : 68 db(A)
Pressione Sonora : 58 db(A)
Lunghezza Massima del Tubo tra Unità Interna ed Esterna : 20 m
Lunghezza Massima Totale del Tubo : 70 m
Dislivello Massimo tra Unità Interna ed Esterna : 20 m
Diamentro Tubi : 1/4 - 3/8
Performance
Raffreddamento
Potenza Raffreddamento kW : 2,29 / 8,5
Potenza Raffreddamento Btu/h : 7800 / 29000
Corrente Massima : 11,3 A
Riscaldamento
Potenza Riscaldamento kW : 3,66 / 8,79
Potenza Riscaldamento Btu/h : 12500 / 30000
Corrente Massima : 11,3 A
Carattertiche Generali
VivAir Top Comfort SDH20
La nuova gamma di condizionatori che migliorano l'efficienza, sostenibilità e design che troverai sul nostro sito climaconvenienza.it
VivAir Top Comfort SDH 20 è la nuova gamma di climatizzatori che utilizzano il gas refrigerante R32 che offre molti vantaggi come una maggiore efficienza energetica, un minore impatto sul clima(Global Warming Potential - GWP= 675) e una minore quantità di carica necessaria rispetto ai climatizzatori che utilizzano il gas R410 A.
Grazie all’utilizzo del nuovo gas R32 i nuovi climatizzatori Hermann Saunier Duval sono già in linea con il raggiungimento degli obiettivi stabiliti dalla nuova normativa in materia di gas fluorurati emanata dalla UE nel 2015, che vieta a partire dal 2025 l’utilizzo di refrigeranti con un GWP superiore a 750 nei climatizzatori monosplit contenenti una carica di refrigerante al di sotto di 3 kg.
VivAir Top Comfort SDH 20 è disponibile in versioni Dual, Trial e Quadri con potenze in raffrescamento da 4,1 kW a 8 kW. Grazie al nuovo gas refrigerante R32, alla tecnologia inverter 3D e alla valvola di espansione elettronica è possibile raggiungere una classe energetica in raffrescamento fino ad A++ (SEER fino a 6,3) e in riscaldamento fino ad A+ (SCOP pari a 4).
VivAir Top Comfort SDH 20 offre diverse funzioni per migliorare il comfort della propria abitazione: funzione I Feel per offrire la temperatura desiderata lì dove si trova il telecomando, funzione Turbo per raggiungere la temperatura desiderata nel più breve tempo possibile, regolazione della direzione del flusso di aria verticalmente e orizzontalmente, funzione Quiet per ridurre al minimo la rumorosità.
VivAir Top Comfort SDH 20 si contraddistingue anche per l’utilizzo di un dispositivo ionizzatore attivo che purifica l'aria della stanza creando ioni negativi che neutralizzano le particelle a carica positiva, mantenendo così l’ambiente fresco privo di odori, batteri e spore di muffa. La funzione X-Fan, inoltre, rimuove l'umidità dallo scambiatore interno, mantenendolo asciutto e prevenendo la formazione di ruggine e batteri.
Tutte le funzioni precedentemente descritte sono disponibili solo per le unità a parete. Le funzioni impostabili nel telecomando in dotazione alle unità a cassetta e console sono equivalenti a quelle della serie VivAir Uni Comfort.
Tutti i telecomandi in dotazione sono facili da usare e caratterizzati da un ampio display per indicare lo stato di funzionamento corrente.
Il nuovo gas R32
VivAir è la nuova gamma di climatizzatori Hermann Saunier Duval che utilizzano il gas refrigerante ecologico R32. Grazie all'utilizzo del nuovo gas è possibile ottenere molti vantaggi quali una maggiore efficienza energetica, un minore impatto sul clima e una minore quantità di carica necessaria rispetto ai climatizzatori che utilizzano il gas R410A. Il gas R32 è un gas sicuro, testato e già largamente utilizzato per applicazioni domestiche in molti paesi esteri da diversi anni.
Che impatto ha sul clima?
Per esprimere l'influenza che un determinato refrigerante avrebbe se rilasciato in atmosfera, si utilizza l'acronimo GWP (Global Warming Potential). Maggiore è il valore del GWP, maggiore è l'effetto negativo di quel refrigerante sul clima e sul riscaldamento globale. Il nuovo refrigerante R32 ha un GWP di circa 675, che corrisponde a circa un terzo di quello del gas R410A (GWP=2088).
Già pronti per le nuove Norme UE
La nuova gamma VivAir è già in linea con il raggiungimento degli obiettivi stabiliti dalla nuova direttiva N. 517/2014 in materia di gas fluorurati emanata dall'Unione Europea, che vieta a partire dal 2025 l’utilizzo di refrigeranti con un GWP superiore a 750 nei climatizzatori monosplit contenenti una carica di refrigerante al di sotto di 3 kg.
Climatizzatore multisplit con gas ecologico R32
Ionizzatore Attivo Il dispositivo ionizzatore attivo presente all'interno dell'unità interna permette di creare ioni negativi che neutralizzano le particelle a carica positiva presenti nella stanza, mantenendo così l’ambiente fresco e salutare, privo di odori, batteri e spore di muffa.
Funzione X-Fan La funzione X-Fan, rimuove l'umidità dallo scambiatore interno, mantenendolo asciutto e prevenendo la formazione di ruggine e batteri, preservando la durabilità del prodotto e contribuendo ad un ambiente più salutare.
Funzione Quiet La funzione Quiet permette di regolare la velocità del ventilatore riducendo al massimo la rumorosità dell'unità interna senza variare il comfort richiesto.
Vantaggi :
Nuovo gas refrigerante R32
Unità interne MultiSplit dedicate: a parete, cassetta e pavimento/soffitto
Classe di efficienza energetica in raffrescamento fino ad A++
Funzione “Auto Clean X Fan" per mantenere asciutto lo scambiatore
Active Ionizer per migliorare la qualità dell’aria nell’ambiente
Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.