Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input in heating max/min: Kw 23.5/5.5 Max/min nominal heat input in domestic hot water: Kw 23.5/5.5 Useful thermal power in heating: max/min: Kw 22.9/5.3 Efficiency at nominal heat input (60/80°C): 97.5% Efficiency at nominal heat input (30/50°C): 103.9% Efficiency at 30% at 30°C: 108.2% Max/min heating temperature (high temperatures): 82/35°C Max/min heating temperature (low temp.): 45/25°C Max/min DHW temperature: 60/36 °C Sanitary water production (DT=25°C): lt./min. 13.1 Specific flow rate (first 10' with DT=30°C): lt./min. 10.5 Total absorbed electric power W 87 Degrees of protection of the electrical system IP X5D Dimensions (HxWxD) mm 745 x 400 x 319 Power supply: CNG or LPG General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. HS Premium Performance ★★★★ NOx class 5 LCD display. Continuous modulation high efficiency circulator. Modulation ratio 1:4. Arrangement for integration with system configuration through the new Buss Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation (with Sensys). Arrangement for solar system management. Aluminum alloy primary exchanger Sanitary plate heat exchanger. Self-diagnosis system by codes. Increased expansion tank lt.8. Cold water inlet and heating return filters. Protection against freezing, limescale and circulator blocking. Operation only with methane gas Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED ASSISTANCE SERVICE IN ADVANCE Technical features Heating efficiency class A Sanitary efficiency class A XL load profile Nominal thermal power in DHW kW 25.2 DHW nominal heat input kW 3.1 / 24.5 Performance stars (Dir. 92/42CEE) ★★★★ NOx class 6 Nominal flow rate in heating (ΔT=30K) l/h 1033 Expansion vessel capacity l 8 Maximum operating overpressure bar 3 Domestic hot water production (ΔT = 30K) l/min 12.2 kW Domestic hot water comfort stars (prEN 13203) ★★ Power supply V/Hz 230/50 Dimensions H x W x L: 300x400x713; 36.0 kgs Power supply: METHANE Condensed 2300 W Condens 2300 W is designed to find space anywhere: its small size makes it easy to install in any domestic environment and makes it an ideal solution for modernization projects. First-class reliability Robustness and reliability of the compact wall-mounted condensing boiler are guaranteed thanks to the primary exchanger in Al-Si WB6 aluminum alloy Maximum seasonal yield The maximum seasonal efficiency obtainable from a condensing boiler (94%). Possibility of having a Class A+ boiler with the combination of a modulating thermoregulator with climatic function Extremely compact The extremely compact dimensions of this boiler make it the ideal replacement when you decide to change the old one Modulation ratio 1:10 The modulation ratio reaches up to 1:10, and is constant over time thanks to the modulation system without mechanical parts. This is to obtain greater gas savings and high comfort even with low domestic hot water requests EasyControl thermostat (optional) Wherever you are, you will feel at home, thanks to the wifi thermostat that can be managed with the app The revolutionary EasyControl thermostat from Bosch allows you to control it via app , wherever you are. All you need is an internet connection on your smartphone to control the temperature in all the rooms of your home directly from work. Our app guarantees continuous control over your system, giving you the possibility of deciding on a weekly schedule for both heating and domestic hot water. Remote management also helps you in some particular situations in your life: the children leave school early and are about to go home, but normally at that time there is no one at home and you have set a temperature of 19° degrees? No problem! While the children come home you can raise the temperature slightly directly from work thanks to the EasyControl thermostat app, so they will find the right warmth when they arrive. Furthermore, with the app you can also control your energy savings, monitoring your annual, monthly and weekly consumption. Finally, in the event of malfunctions in your heating system, you can request immediate assistance with a simple "touch" , directly from the app installed on your smartphone. The app is available for Android and iOS devices. Advantages Robust and reliable boiler thanks to the aluminum alloy primary exchanger Maximum seasonal efficiency of the boiler Modulation ratio up to 1:10 Extremely compact size boiler Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! THE BOILER IS BORN WITH METHANE. THEREFORE, THE TRANSFORMATION KIT WILL BE SUPPLIED AS STANDARD. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Technical features Model : HS Premium Product code : 3301325 Power supply: Methane/LPG Energy efficiency Heating energy efficiency class: A Energy efficiency class for sanitary facilities: A Profile : XL Performance Nominal heat output in heating mode: 5.5 ~ 23.5 Kw Nominal heat output in sanitary mode: 5.5 ~ 23.5 Kw Useful thermal power in heating: 5.3 ~ 22.9 Kw Efficiency at nominal heat output (60/80°C): 97.5% Efficiency at nominal heat output (30/50°C): 103.9% Efficiency at 30% at 30°C: 108.2% High temperature heating temperature: 35° ~ 82°C Low temperature heating temperature: 25° ~ 45°C Sanitary temperature: 36° ~ 60°C Sanitary water production (DT=25°C): 13.1 lt/min Specific flow rate (first 10' with DT=30°C): 10.5 lt/min Total absorbed electrical power: 87 W Electrical system protection levels: IP X5D Dimensions and weight Dimensions (HxWxD): 745x400x319 mm Weight: 32.0 Kg Ariston HS Premium compact condensing boiler Along with heat, a traditional boiler also produces water in the form of steam, usually evacuated through exhaust fumes. Since normal boilers do not treat these fumes before releasing them into the environment, they therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process that, inside the boiler, transforms water from the state of steam back into the liquid state. Constant convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings on the bill, it takes less than three years to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real profit. Imagine what a bill reduced by up to 35% every year, for many years, means for your economies... Zero waste only benefits Today, Ariston combines energy savings with fiscal savings, offering a great opportunity to those who have chosen to replace their old boiler with a condensing one. The Financial Law provides, in fact, specific fiscal incentives for taxpayers. High efficiency circulator with continuous modulation. Modulation ratio 1:4. Ready for integration with system configuration through the new Buss Bridgenet® communication protocol Provision for multi-zone and multi-temperature thermoregulation (with Sensys). Provision of solar system management. Primary exchanger in aluminum alloy Sanitary plate exchanger. Self-diagnosis system using codes. Increased 8 litre expansion vessel. Cold water inlet and heating return filters. Anti-freeze, anti-scale and anti-blocking circulator protection. Product Warranty : All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON GAS BOILER model CARES X 24 CF METHANE Low NOx OPEN CHAMBER - NEW Product code: 3301313 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications Internal, installation in branched collective pipe with natural draft Nominal heat input max/min (heating) PCI kW 25.8-11.0 Nominal heat input max/min (sanitary) PCI kW 27-11 Max/min useful heat output (heating) kW 23.2-9.8 Efficiency at nominal heat input PCI: 90.1% Efficiency at 30% of nominal flow rate PCI: 89.9% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 11.8 litres/min Quantity of hot water (ΔT=25°C): 14.2 l/min Quantity of hot water (ΔT=35°C): 10.1 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Degree of protection of the electrical system IP X4D Dimensions: mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Characteristics Digital multifunction display Continuous modulation high efficiency circulator Predisposition for on-off thermoregulation Predisposition solar systems natural circulation Self-diagnosis system by code Mono-temperature zone management Copper finned primary exchanger Double exchanger technology Integrated minimum pressure switch Cold water inlet and heating return filters Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ariston CARES S 24 EU condensing boiler complete with methane or low NOx LPG fume exhaust kit 3301637 - NEW Heating energy class A Sanitary energy class A XL load profile Nominal heat input max min heating 20.0/4.7 kW Nominal max min DHW heat input 23.5/4.7 kW Heating temperature max min 82 / 35 °C Quantity of hot water deltaT=25°C 13.2 litres/min Power frequency voltage 230/50 V/Hz Electrical protection degree X5D IP NOx class 6 CARES S The condensing boiler suitable for every need, able to combine great performance and high robustness. Thanks to the stainless steel condensing exchanger, CARES S represents the right balance between comfort and performance. Reduction of energy consumption up to 35% Stainless steel condensing exchanger More robust design thanks to the new metal front panel Better accessibility thanks to the front hydrometer MADE IN ITALY produced entirely in Italy SMALL SIZE small footprint for easy installation SYSTEM MANAGEMENT new communication protocol set up to guarantee complete management of the system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance IN THE ABSENCE OF THIS ITEM, THE BLUEHELIX ALPHA 24 MODEL WILL BE SHIPPED Technical features Model : Bluehelix Tech RRT 24C Energy rating Heating energy efficiency class: A DHW energy efficiency class: A ACS profile : XL Performance Heating thermal capacity: 5.0 ~ 20.4 kW Heating thermal power 80°C / 60°C : 4,9 ~ 20,0 kW Heating thermal power 50°C / 30°C : 4,9 ~ 20,0 kW DHW thermal capacity: 5 ~ 25.0 kW Sanitary thermal power: 4.9 ~ 24.5 kW Minimum efficiency 80°C / 60°C : 97.8% Maximum efficiency 80°C / 60°C : 98.0% Minimum efficiency 50°C / 30°C : 107.5% Maximum efficiency 50°C / 30°C : 106.1% G20 gas pressure : 20 bar G31 gas pressure : 37 bar NOx emission class : 6 Heating operating pressure: 0.8 ~ 3 bar Maximum heating temperature: 90°C Heating expansion vessel capacity: 8 litres DHW operating pressure: 0.3 ~ 9 bar Domestic water flow rate ∆t 25°C : 14 l/min Domestic water flow rate ∆t 30°C : 11.7 l/min Degree of protection : IP X5D Power supply (V,Hz, Ø) : 220~240/50/1 Dimensions and weight Dimensions (HxWxD): 700x420x250 mm Empty weight: 28.0 kg 5 years without worries Ferroli BLUEHELIX TECH RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ combustion cell The evolution continues.. The range of generators is equipped with the tested AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TECH RRT is at the top of its category. BLUEHELIX TECH RRT achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ Extended warranty with the "5 YEARS WORRY-FREE" formula The quality of Bluehelix TECH RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and legal checks TOP efficiency even on old systems The exchanger of the THERMOBALANCE™ thermal group by Bluehelix TECH RRT compared with the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in Bluehelix models This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments, for example due to installation on old systems, the exchanger tends to blockage much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits is formed which hinder the heat exchange and reduce the efficiency below the nominal values . Product plus > Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt > It reaches one of the highest seasonal space heating efficiency in its category: ηs 94% and in combination with the modulating remote control and the optional external probe it reaches the top efficiency class > Class 6 NOx : already in line with the provisions of the ErP regulation, NOx emissions < 56mg/kWh. > MC 2 : M ulti C ombustion C ontrol, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network, such as fluctuations or reduced pressures. > MGR : Methane LPG R eady, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits > Exclusive exchanger-burner system with self-cooled door without insulators: it simplifies maintenance and reduces its cost thanks to a smaller number of perishable parts. > Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger > Hydraulic connections covered by the boiler shell > Large backlit multifunction graphic display for easy and correct parameter setting > Standard by-pass > Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes > FPS : Fumes Protection System . The flue clapet valve fitted as standard on the boiler allows easy connection to pressurized collective flue systems > Designed to simplify and facilitate normal maintenance and cleaning operations > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > ECO function in DHW for greater savings in the period of low use of hot water > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Low consumption modulating heating circulator > Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection, only for methane operation > Place of installation : also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Innovative Ferroli THERMOBALANCE TM heating unit in its 5 elements Ferroli has oriented the design of the combustion cell and of the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit in which if only one of the circuits gets blocked, chemical washing is much more laborious. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent “ Gas-adaptive ” system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary Offset fan, to facilitate maintenance of the thermal group without disassembly. Integrated smoke anti-reflux clapper for connection to CCS The engine Combustion cell The tube that makes up the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. TOP quietness The new design for comfort The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. Remote control Environment and climate BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow remote control and control of the appliance. The ROMEO series is made up of several models, with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, guaranteeing the user greater comfort as the external climatic conditions vary. This function is internal to the electronic board of the boiler and therefore does not require the presence of the remote control , making the configuration operations easier in case of replacement. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Boiler control Control panel and functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance" tm thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - Internal accessibility is favored by the 3-piece shell with removable side panels. - The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit - The burner door is totally self-cooled by air and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. - The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections . - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Simplified replacement Smoke outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. FPS .: Fumes Protection System . The flue clapet valve allows easy connection to pressurized collective flue systems . For installers, the solution of the collective pressure pipe is cheaper Comfort & Safety The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life of the appliance Stop And Go function With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX TECH RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Sanitary Eco-Comfort function In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable . Reaching maximum comfort certified 3 stars. The efficiency and load profiles according to the ErP directive are at the top of the category External installation and antifreeze function To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed recessed into the wall using the special kit. For more critical installations, in completely uncovered places not protected from the elements, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance IN THE ABSENCE OF THIS ITEM, THE BLUEHELIX ALPHA 24 MODEL WILL BE SHIPPED Technical features Model : Bluehelix Tech RRT 24C Energy rating Heating energy efficiency class: A DHW energy efficiency class: A ACS profile : XL Performance Heating thermal capacity: 5.0 ~ 20.4 kW Heating thermal power 80°C / 60°C : 4,9 ~ 20,0 kW Heating thermal power 50°C / 30°C : 4,9 ~ 20,0 kW DHW thermal capacity: 5 ~ 25.0 kW Sanitary thermal power: 4.9 ~ 24.5 kW Minimum efficiency 80°C / 60°C : 97.8% Maximum efficiency 80°C / 60°C : 98.0% Minimum efficiency 50°C / 30°C : 107.5% Maximum efficiency 50°C / 30°C : 106.1% G20 gas pressure : 20 bar G31 gas pressure : 37 bar NOx emission class : 6 Heating operating pressure: 0.8 ~ 3 bar Maximum heating temperature: 90°C Heating expansion vessel capacity: 8 litres DHW operating pressure: 0.3 ~ 9 bar Domestic water flow rate ∆t 25°C : 14 l/min Domestic water flow rate ∆t 30°C : 11.7 l/min Degree of protection : IP X5D Power supply (V,Hz, Ø) : 220~240/50/1 Dimensions and weight Dimensions (HxWxD): 700x420x250 mm Empty weight: 28.0 kg 5 years without worries Ferroli BLUEHELIX TECH RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ combustion cell The evolution continues.. The range of generators is equipped with the tested AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TECH RRT is at the top of its category. BLUEHELIX TECH RRT achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ Extended warranty with the "5 YEARS WORRY-FREE" formula The quality of Bluehelix TECH RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and legal checks TOP efficiency even on old systems The exchanger of the THERMOBALANCE™ thermal group by Bluehelix TECH RRT compared with the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in Bluehelix models This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments, for example due to installation on old systems, the exchanger tends to blockage much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits is formed which hinder the heat exchange and reduce the efficiency below the nominal values . Product plus > Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt > It reaches one of the highest seasonal space heating efficiency in its category: ηs 94% and in combination with the modulating remote control and the optional external probe it reaches the top efficiency class > Class 6 NOx : already in line with the provisions of the ErP regulation, NOx emissions < 56mg/kWh. > MC 2 : M ulti C ombustion C ontrol, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network, such as fluctuations or reduced pressures. > MGR : Methane LPG R eady, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits > Exclusive exchanger-burner system with self-cooled door without insulators: it simplifies maintenance and reduces its cost thanks to a smaller number of perishable parts. > Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger > Hydraulic connections covered by the boiler shell > Large backlit multifunction graphic display for easy and correct parameter setting > Standard by-pass > Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes > FPS : Fumes Protection System . The flue clapet valve fitted as standard on the boiler allows easy connection to pressurized collective flue systems > Designed to simplify and facilitate normal maintenance and cleaning operations > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > ECO function in DHW for greater savings in the period of low use of hot water > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Low consumption modulating heating circulator > Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection, only for methane operation > Place of installation : also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Innovative Ferroli THERMOBALANCE TM heating unit in its 5 elements Ferroli has oriented the design of the combustion cell and of the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit in which if only one of the circuits gets blocked, chemical washing is much more laborious. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent “ Gas-adaptive ” system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary Offset fan, to facilitate maintenance of the thermal group without disassembly. Integrated smoke anti-reflux clapper for connection to CCS The engine Combustion cell The tube that makes up the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. TOP quietness The new design for comfort The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. Remote control Environment and climate BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow remote control and control of the appliance. The ROMEO series is made up of several models, with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, guaranteeing the user greater comfort as the external climatic conditions vary. This function is internal to the electronic board of the boiler and therefore does not require the presence of the remote control , making the configuration operations easier in case of replacement. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Boiler control Control panel and functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance" tm thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - Internal accessibility is favored by the 3-piece shell with removable side panels. - The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit - The burner door is totally self-cooled by air and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. - The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections . - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Simplified replacement Smoke outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. FPS .: Fumes Protection System . The flue clapet valve allows easy connection to pressurized collective flue systems . For installers, the solution of the collective pressure pipe is cheaper Comfort & Safety The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life of the appliance Stop And Go function With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX TECH RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Sanitary Eco-Comfort function In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable . Reaching maximum comfort certified 3 stars. The efficiency and load profiles according to the ErP directive are at the top of the category External installation and antifreeze function To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed recessed into the wall using the special kit. For more critical installations, in completely uncovered places not protected from the elements, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product code: 3310508 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi) : 23.5/4.5 kW Max/min DHW nominal heat input (Hi) : 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW Efficiency at nominal heat input: 97.7 / 88% Efficiency at 30% of the nominal heat input: 104.3 / 94% Expansion vessel capacity: 8 l Min/max heating temperature (high temperature range) °C 35/82 Min/max heating temperature (low temperature range) °C 25/45 DHW temperature min/max °C 36/60 Instantaneous quantity of hot water ΔT=25°C l/m 13.9 Instantaneous quantity of hot water ΔT=35°C l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 34 Electrical protection degree IP X5D CX GREEN EU   The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX CX GREEN 24 EU CONDENSING GAS BOILER COMPLETE WITH LPG FUME KIT Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL LPG supply Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi): 23.5/4.5 kW Max/min DHW nominal heat input (Hi): 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW Efficiency at nominal heat input: 97.7 / 88% Efficiency at 30% of the nominal heat input: 104.3 / 94% Expansion vessel capacity: 8 l Min/max heating temperature (high temperature range) °C 35/82 Min/max heating temperature (low temperature range) °C 25/45 DHW temperature min/max °C 36/60 Instantaneous quantity of hot water ΔT=25°C l/m 13.9 Instantaneous quantity of hot water ΔT=35°C l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 34 Electrical protection degree IP X5D CX GREEN EU   The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston condensing boiler Genus One+ Net 24 kW Low NOx Methane or LPG with complimentary Sensys HD flue gas kit STANDARD - NEW Energy class A++* Energy class in sanitary A XL withdrawal profile COMBUSTION Nominal heat input in heating max/min PCI kW 22.0 / 2.6 Nominal heat input in DHW max/min PCI kW 26.0 / 2.6 Heating thermal power max/min (80°C-60°C) PCI kW 21,5 / 2,5 Efficiency at 30% at 30°C PCI % 109.5 HEATING CIRCUIT Maximum heating pressure 3 bar Expansion vessel capacity l 8 Heating temperature min/max °C 20 / 82 SANITARY CIRCUIT Min/max DHW temperature °C 36 / 60 Instantaneous amount of hot water ?T=25°C l/min 15.4 ELECTRICAL DATA Supply voltage/frequency V/Hz 230/50 Degree of protection of the electrical system IP X5D Dimensions HxDxL mm 745x315x400; 32kg *Achievable with standard thermoregulation accessory and web reference for external temperature Genus One+ Net Ariston excellence guaranteed for 10 years thanks to the smart protection assistance programme. Latest generation condensing boiler integrated wifi and voice control , hydrogen compatible up to 20%. Voice control With genus ONE+ NET your voice is enough to manage the comfort of your home, thanks to the integration of the ariston net google home amazon alexa app Ariston NET With ariston NET you have comfort at your fingertips. Remote control, consumption reports and online technical support, all in one free smartphone app Top of the range condensing boiler, with integrated connectivity and compatible with 20% hydrogen blends Patented XtraTech™ high head stainless steel heat exchanger Modulation ratio 1:10 Low NOx levels (24 mg/kWh) Silent operation (only 46 db(A)Mod. 24kW) Compatibility with natural gas, LPG and propane air without the use of kits Ignition Control System+, stable and safe performance Hydro Sensor System, constant monitoring of system pressure Flow Control System+, optimal balance of flow and comfort Integrated Wi-Fi and ARISTON NET connectivity as standard Tempered and scratch resistant glass panel Large LCD display with touch interface Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston condensing boiler CLAS ONE Wi-Fi 24 kW Complimentary flue gas kit Integrated Wi-Fi low NOx ErP nominal heat input max/min heating PCI kW 22.0 / 3.7 nominal heat input max/min DHW PCI kW 26.0 / 3.7 useful heat output max/min heating PCI kW 21.4 / 3.4 efficiency at nominal heat input (60/80° c) PCI % 97.5 efficiency at nominal heat input (30/50° c) PCI % 107.3 yield at 30% (30th c) PCI % 109.8 max/min heating temperature (high temperature) °C 82 / 35 max/min heating temperature (low temperature) °C 45 / 20 max/min domestic hot water temperature °C 60 / 36 quantity of hot water (deltaT 25°C) l/min 14.5 quantity of hot water (deltaT 35°C) l/min 10.4 specific flow rate (first 10' with deltaT 30°C) l/min 12.1 minimum operating temperature (-5°C with antifreeze kit)* °C > 0° supply voltage/frequency V/Hz 230 / 50 total absorbed electrical power W 77.0 electrical system protection degree IP X5D Energy class A Energy class in sanitary A XL withdrawal profile Dimensions HxWxD 745x400x315 Class One Wi-Fi Functionality: / XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head / Class A+ in heating reachable with thermoregulation / Modulation ratio 1:8 / Wifi integrated in the boiler /LCD displays / BusBridgeNet® communication protocol / AUTO function, Comfort / Optimized internal silencer / Installation in partially protected places / Smoke outlet 80, 60, 50 mm CLASS ONE WIFI XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less