Midea Air Conditioner Ceiling/Floor R32 48000 btu MUE-48FNXD0 A++ - NEW Model: Indoor unit code: MUE-55FNXD0 Outdoor unit code: MOU-55FN8-QD0 Power; 55000 btu/h Performance: Cooling capacity kW min-nom-max 5.28-15.90-17.00 Heating capacity kW min-nom-max 4.40-18.20-19.64 Cooling Absorbed Electric Power W (Min-Nom-Max) 1227-6063-6296 Electric power absorbed heating W (Min-Nom-Max) 1022-6036-6546 Sound power 69 dBa Characteristics: Power supply (V/Hz/Φ) : Three-phase 380-415V 50Hz Refrigerant Piping Liquid / Gas Line: mm(inch) 9.50 / 15.88 Dimensions and weight: Indoor Unit (LxWxH): 1650-675-235 mm ; 47.6 Kgs External Unit (LxWxH): 1095-495-1480 mm; 119 kgs Infrared control included Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Floor/Ceiling R-32 Easy Cleaning Panel To simplify cleaning operations, all the different parts of the units are easily accessible and/or removable. Turbo function A specific function allows the unit to reach the desired/set temperature in the shortest possible time. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the unit's return duct Wide Range of Air Diffusion The distribution of the air flow is multidirectional, in order to distribute the cold and the heat in the most uniform way, thus guaranteeing maximum comfort. Wired Command Arrangement The control of the units can be carried out, as well as by remote control, also by means of the special wall command (purchasable as an optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model Model: Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 240-380-440 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 810-200-300 ; 8.3kg Outdoor Unit Catalog number: M2OG-14HFN8-Q Gases : R-32 Minimum-max number of connectable indoor units: 2 Energy efficiency - Cooling down Nominal Capacity kW: 5.20 Absorbed power (Max): W 1750 SEER Seasonal energy efficiency: 6.3 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 289 - Heating Nominal Capacity kW: 5.50 Absorbed power (Max): W 1450 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1680 Performance Outdoor Unit Air Flow: m3/h 2200 External Unit Sound Pressure Max (dB(A)): 56 Sound power (Max) dB(A): 64 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Characteristics Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 Dimensions Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg Outdoor Unit (LxDxH) (mm): 800x330x555 ; 30 Kgs MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA MISSION PRO The geometries used for the splits of the MISSION PRO range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Superior Performance Inverter 4 The exclusive QuattroTM Inverter technology allows excellent performance in all conditions of use, making the Midea Inverter compressor one of the best AC compressors in the world. In all conditions, Midea Inverter compressors work powerfully, efficiently, quickly and constantly Maximum efficiency - The step-less linear modulation of the compressor makes it possible to adapt the rotation speed, and therefore the capacity supplied, to the environmental conditions in an extremely precise manner. The compressor perfectly adapts its rotation speed to the needs of the system without waste and with maximum efficiency. Linear regulation - The internal fan speed is user selectable in a linear fashion between 1% and 100% instead of being available in 4 or 5 levels. In this way it is possible to make the product deliver the most congenial air flow to your needs, for maximum comfort. Less Noise - The speed of the external fan adapts to the external temperature conditions and to the working modes of the product, to ensure less noise and maximum efficiency Better Comfort - The temperature that can be set on the products is managed at intervals of 0.5°C. In this way it is possible to find the most correct temperature setting for your well-being. Do Not Disturb function By pressing a button on the remote control it is possible to silence all acoustic alarms, turn off the display of the indoor unit and reduce the speed of the indoor fan to a rotation speed lower than the minimum, normally selectable iECO function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode GEAR function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation Follow me function Select this function and the special sensor located in the infrared control will detect the ambient temperature around you, and then adjust the operation of the air conditioner according to your needs Other features of the series Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: Indoor unit code: MA2-24NXD0-I Outdoor unit code: MA-24N8D0-O Energy efficiency: SEER: 6.1 SCOP(medium-warm season) : 4.0-4.8 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating) medium/hot season: A+/A++ Annual cooling/heating energy consumption kWh/A: 402/1896 Performance: Min-nom-max cooling capacity: 2.65-7.03-8.25 kW Min-nom-max absorbed power in cooling: 946-2434-3507 W Heating capacity min-nom-max: 2.92-7.33-8.53 kW Min-nom-max absorbed power in heating: 1004-2464-3072 W Air flow (Min-med-Max) m3/min: 11.7-14.3-17.5 Internal unit sound pressure ( (Silent-Min-Med-Max) (db(A)): 22-33-40-47 Internal unit sound power max db(A); 56 Max outdoor unit sound pressure (db(A)): 60 Max outdoor unit sound power (db(A)): 68 Operating limit temperature: -15°C Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 9.52/15.88 (3/8"-5/8") Type of refrigerant: R32 Dimensions and weight: Indoor Unit (LxDxH): 1038x235x325 mm ; 12.8kg Outdoor Unit (LxWxH): 845x363x702 mm; 51.2kg MIDEA PRIME The geometries used for the splits of the PRIME range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Internal fan rotation speed linear regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values ​​1-100%: Follow me function Prime series remote controls are equipped with a temperature sensor which the unit considers as "ambient" temperature. In fact, by setting the Follow me function, the appliance is able to "follow the real temperature perceived by the user, guaranteeing maximum comfort. Condensation control The units can work in cooling mode even with a low external temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Refrigerant leak alarm If the temperatures in the refrigerant circuit are irregular due to leaks, a specific fault code (EC) allows you to identify this condition. emergency function In the event of failure of one of the product's sensors, operation can continue in Emergency mode until the faulty part is replaced. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. Super cool function The Super Cool function is a real hallmark of PRIME air conditioners: activated by simply pressing a button, this particular mode maximizes the rotation speed of the internal fan, thus increasing the flow of cold air and allowing the appliance to reduce the temperature to 17°C as quickly as possible Gear function The Prime units are equipped with the GEAR function which offers the user the possibility of independently managing the power supplied by the unit, choosing one of the 3 different levels: 50%, 75% and 100%. In this way you can disregard the classic settings by concentrating solely on the "gear" in which you want the unit to operate: first, second or third. ECO function The Midea Prime series units are equipped with a special iECO mode which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners "Do Not Disturb" mode By pressing a button on the remote control, Prime can enter DO NOT DISTURB mode, thus silencing all acoustic warnings, turning off the indoor unit display and optimizing the silence of the indoor fan. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

MIDEA TRIAL SPLIT INVERTER AIR CONDITIONER AIR CONDITIONER MISSION PRO 9+9+12 series with M3OF-21HFN8-Q R-32 Wi-Fi OPTIONAL 9000+9000+12000 1) Model: Model: 2 x Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.64 Heating capacity (kW): 2.93 Air Flow (min-med-max) m3/min 4.0-6.2-7.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg 2) Model: Model: Mission Pro MSMBBU-12HRFN8 Power: 12000 btu/h Performance: Cooling Capacity (kW): 3.52 Heating Capacity (kW): 3.81 Air Flow (min-med-max) m3/min 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-32-40 Sound power (Hi) dB(A) 56 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 810×200×300 ; 8.5kg OUTDOOR UNIT: Catalog number: M3OF-21HFN8-Q Gases : R-32 Minimum-max number of connectable indoor units: 3 Energy efficiency - Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 - Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Characteristics Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 Dimensions Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs MIDEA Mission Pro Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and step-less linear modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The MISSION-PRO units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection. Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Suitable for installations in coastal areas or in particularly humid areas. Under the same environmental conditions, the new coating of the Midea condensers guarantees them a longevity up to over 7 times higher than traditional models. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use. Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely.

Read more less

Technical features Model: Indoor unit code: MUEE-53 Outdoor unit code: MOUE-53K Technology: 3D DC INVERTER Power: 18000 btu/h Energy efficiency: Cooling efficiency SEER: 6.5 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual Energy Consumption cooling/heating kWh/a: 205/1715 Performance: Power Output in cooling: 5.2 kW Power Output in heating: 5.8 kW Power absorbed in cooling: 1630 W Power absorbed in heating: 1460 W Air Flow (Max / Med / Min) (m3/min): 11.7-13.3-16.7 Indoor unit Sound Pressure (Max / Med / Min) (db(A)): 46/41/37 Internal unit sound power max db(A); 56 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35(1/4") / 12.7(1/2") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 1068x675x235 mm; 26 kgs Outdoor Unit (LxDxH): 800x333x556 mm ; 35 kgs General characteristics Single Ceiling/Floor Indoor Units Easy to clean panel To simplify cleaning operations, all the plastic panels of the indoor units are easily accessible and/or removable Turbo mode If the user wants to reach the desired/set temperature as quickly as possible, he can count on the Turbo function, which maximizes the product's operating capacity. “Fresh Air” intake The "Aria Fresca" intake is standard, it is easy to connect it to the external air passage hole. Wide range of air diffusion The units are equipped with a technology capable of distributing the air flow in a very uniform way, thus ensuring maximum comfort Arrangement for wall control Some Midea ranges are designed to be controlled not only via remote control but also via wall controls and/or weekly timers (optional accessories). Series features: Gas Leak Alarm : In the event that careless installation of the system should cause micro-leaks of refrigerant gas, the system displays a specific alarm signal. Self-diagnosis A performance monitoring system allows Midea air conditioners to diagnose any malfunctions and failures. Technical rooms air conditioning A special technology allows all Midea Splits to be able to operate in "cooling" mode even with external temperatures down to -15°. Ideal for air conditioning Server Rooms and/or technical rooms. Outdoor Unit Heating Tape A PTC heating tape mounted on the base plate of the outdoor unit prevents rain, water or snow from accumulating, ensuring safer operation. Follow me Midea remote controls are equipped with a temperature sensor, which the unit considers as "ambient temperature". The air conditioner therefore works by "following" the real temperature perceived by the user. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Units Model Indoor Unit Catalog Code : 3x MSEPBU-09HRFN8 EAN: 8052705161830 Power : 9000 Btu Cooling Capacity: 2.60 kW Heating Capacity: : 2.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi Outdoor Unit Outdoor Unit Catalog Code: M3OF-27HFN8-Q EAN : 8052705160116 Connectable Indoor Units : 3 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 453 kWh/a Annual energy consumption in Heating : 1993 kWh/a Performance: Cooling Capacity: 7.91 kW Heating Capacity: 8.21 kW Std Cooling Absorption : 2450 W Heating Std Absorption: 2200 W Sound power level : 67 dB(A) Sound pressure level : 54 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Maximum piping length: 30 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 845x363x702 mm Weight of Outdoor Unit: 51.1 Kg Midea All Easy Pro Installing the indoor units is quick and easy, thanks to the graduated installation plate with integrated spirit level and support bracket. The functional components can be disassembled in less than 1 minute. All Easy Pro is equipped with the Eco Eye function which allows you to check the presence of people in the rooms, activating an energy-saving work cycle when they are not occupied, to contain energy consumption. When using the product in dehumidification mode, it is possible to set a desired relative humidity value for the environment, so as not to dry the air excessively Simplified installation and maintenance A series of functions that allow you to install the product in less time. All functional parts of the unit can be removed with a few simple operations to facilitate cleaning and maintenance of the product Intelligent eye By pressing a button on the remote control, a sensor checks for the presence of people in the room and, if no movement is detected in the room, a low energy consumption work cycle is activated Smart drying In dehumidification mode, it is possible to set the desired level of relative humidity in the room, in order to avoid excessive drying of the air Quick installation and easy maintenance With Alle Easy Pro everything is easy, just 1 screw and 1 minute. Save 80% maintenance time compared to standard indoor units Fast installation With All Easy Pro, 6' 47 is enough Traditional system 11' 33" Fan disassembly With All Easy Pro 1' 12" is enough Traditional system 17' 37" PCB replacement 1' 3" is enough for assembly 1' 12" is enough for disassembly Positioning and fixing of the plate without measuring tools Quick installation with super thin plate with integrated scale and spirit level 1. Mark guide point A following the instructions on the plate 2. Move the plate down until it meets the reference hole 3. Align the plate with the built-in level and mark the hole on the other side Wiring in just 3 seconds The pipe fixing clip folds to keep the product raised during the connection of the pipes, offering ample space to facilitate all the operations of tightening the fittings Freedom of installation Maximum height difference of the pipes: 25 m Maximum piping length: 50 m A minimum distance from the ceiling of only 5 cm is required Cleaning and hygiene Cleaning the internal fan is easy, thanks to the innovative design that allows disassembly in 1 minute with just 1 screw. So you can save time and money to dedicate yourself to what you love A flexible solution Thanks to the extreme flexibility of All Easy Pro, you can install it at a minimum distance of only 5 cm from the ceiling, allowing for optimal cooling of the room Simplified filter cleaning All Easy Pro is hygienic and practical: 6 magnetic connectors hold the upper filter in position to allow it to be removed and cleaned whenever desired Intelligent Eye Eco Master Intelligent Eye function automatically activates energy saving mode when it detects an empty room, thus reducing energy costs by up to 25% Smart Kit App with voice control With All Easy Pro technology, you can control the air conditioner with your voice or with the Midea Air app Control your climate with your voice The air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units in the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Midea Inverter Air Conditioner 4-Way Cassette Super Slim 90x90 30000 btu MCD1-30HRFNX A++ Wi-Fi Optional Grid Included Indoor unit MCD1-30HRFNX-QRD0W MOD30U-30HFN8-QRD0W outdoor unit Power supply V/H/Hz 220-240 / 1 / 50 Cooling/Heating Capacity kW 2.75 (0.19 ~ 3.00) / 2.45 (0.43 ~ 2.55) Dimensions ui WxHxD 830 x 830 x 245 Energy efficiency class Cooling A++ Heating A+ Energy efficiency SEER (cooling mode) 6.6 SCOP (heating mode) 4.2 Sound pressure level dB(A) 49.5 / 47 / 44 / 38.5 panel Panel Model T-MBQ4-04A1 Panel dimensions (WxHxD), mm 950 x 55 x 950 OUTDOOR UNIT Model Name MOD30U-30HFN8-QRD0W Compressors Type Inverter R32 gas Power supply V/Hz/Ph 220/50/1 Sound power level, dB(A) 70 Piping diameter Liquid 9.52 Gas 15.90 mm Dimensions (WxHxD), mm 946 x 410 x 810 SUPER SLIM 4-WAY CASSETTE Automatic restart In the event that the air conditioner stops operating unexpectedly due to a power failure, it will restart automatically as soon as the power is restored and resume operating in the mode set before it was turned off. Heating 8°C In 8°C heating mode, this constant temperature is maintained, thus protecting the house from overcooling in winter or freezing pipes and houseplants. The regime is particularly suitable in case of long absence of the occupants of the house. Fresh air inlet Outside air can be brought in through an additional ventilation duct. This ensures clean and fresh air in the air-conditioned room. 360° airflow The mode provides an extremely light and soft airflow, which circulates throughout the room and ensures an even temperature distribution. Human activity sensor (optional) The human activity sensor monitors the presence of people in the room and takes into account the power supplied by the system to ensure perfect comfort. Emergency operation In the best air conditioners, when the sensor temperature fails, the system stops working. With Midea, the indoor unit reports an error code, but the system continues to operate in emergency mode. Built-in condensate pump The built-in condensate pump allows the condensate to rise up to a maximum of 750mm. Alarm system door When a fault is detected in the climate control system, an external alarm system is activated which signals an error and automatically stops its operation. Slot memory The position of the horizontal valve of the climate control system is memorized when switching off and automatically restored when switching on again. Detection of refrigerant leaks The indoor unit of the air conditioner detects an "EC" error code, it will display and stop working automatically when a freon leak is detected. This will protect the air conditioning compressor from damage caused by high temperatures when the refrigerant leaks. Wired control (optional) The wired controller can be fixed to the wall for a permanently mounted control solution. Centralized management (optional) The central controller is a multifunctional device that can control up to 64 indoor units with a maximum connection length of up to 1200 meters. No breeze The innovative Breezeless effect ensures uniform distribution of the air, thus avoiding direct exposure to people in the room. This eliminates the sensation of air flow from the climate control system. Wifi ready The air conditioners of this series have the possibility of installing a Wi-Fi module that allows you to control the air conditioner from anywhere and at any time using a mobile application installed on your smartphone or tablet. LED displays The indoor unit is equipped with a large LED display which provides information on the operation of the air conditioning system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: Indoor unit code: MTBE-70 Outdoor unit code: MOUE-70K Technology: 3D DC INVERTER Power: 24000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 7.03 kW Power Output in heating: 7.03 kW Power absorbed in cooling: 2285 W Power absorbed in heating: 1900 W Air Flow (Max / Med / Min) (m3/min): 16.2-20.0-22.7 Indoor unit Sound Pressure (Max / Med / Min) (db(A)): 46/42/38 Internal unit sound power max db(A); 62 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 9.5(3/8") / 15.9(5/8") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 920x635x270 mm ; 28 kgs Outdoor Unit (LxDxH): 845x363x702 mm ; 48 kgs To view more product information CLICK HERE General characteristics Single Ducted Indoor Units Flexible air return Rear air inlet is standard, while bottom air inlet is optional. The dimension of the bottom plate and the back flange are the same, so it is easy for the installer to change the air inlet from the back to the bottom Integrated drain pump The drain pump, capable of lifting the condensed water up to 750mm, is standard for both the 4-Way Cassette and the Ducted units. Twin combination Some types of indoor units can be installed in "Twin" mode: a single outdoor unit can connect to two indoor units, expanding the scenario of possible installations. Available in combinations: 18k+18k, 24k+24k, 30k+30k. to air-condition Server Rooms and/or technical rooms. Fresh air intake The "Air Fresh" intake is standard, it is easy to connect it to the external air passage hole.maintenance and assistance Series features: Gas Leak Alarm : In the event that careless installation of the system should cause micro-leaks of refrigerant gas, the system displays a specific alarm signal. Self-diagnosis A performance monitoring system allows Midea air conditioners to diagnose any malfunctions and failures. Technical rooms air conditioning A special technology allows all Midea Splits to be able to operate in "cooling" mode even with external temperatures down to -15°. Ideal for air conditioning Server Rooms and/or technical rooms. Outdoor Unit Heating Tape A PTC heating tape mounted on the base plate of the outdoor unit prevents rain, water or snow from accumulating, ensuring safer operation. Follow me Midea remote controls are equipped with a temperature sensor, which the unit considers as "ambient temperature". The air conditioner therefore works by "following" the real temperature perceived by the user. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN THE ABSENCE OF THE PRODUCT THE NEXT BREEZELESS+ MODEL WILL BE SHIPPED Technical features Indoor Units 1) Model: Model: 2 x MSMTAU-12HRFN8 Power: 12000 btu/h Performance: Cooling Capacity (kW): 3.52 Heating Capacity (kW): 3.81 Air Flow (min-med-max) m3/min 6.3-8.0-10.0 Sound pressure (Silent-Min-Med-Max) dB(A) 19.5-26-32-40.5 Sound power (Hi) dB(A) 54 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm):886x188x315 ; 10.3kg Outdoor Unit Model: Catalog number: M2O-18FN8-Q Gases: R-32 Max indoor units that can be combined: 2 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 5.20 Absorbed power (Max): W 1750 SEER Seasonal energy efficiency: 6.3 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 289 Heating Nominal Capacity kW: 5.50 Absorbed power (Max): W 1450 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1680 Performance: Outdoor Unit Air Flow: m3/h 2200 External Unit Sound Pressure Max (dB(A)): 56 Sound power (Max) dB(A): 64 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 800x333x555 ; 36 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Ultimate Comfort Ultimate Comfort by Midea represents the extreme evolution of domestic air conditioning systems: thanks to the exclusive Silky Cool technology, in fact, the air flow emitted by the air conditioner is channeled through hundreds of tiny holes, which transform the "classic" jet of air, often the cause of stiff necks and colds, in a delicate and pleasant flow. The result for the user? All the comfort of a Midea air conditioning system without the inconvenience caused by a continuous jet of air on our body. In fact, sheltered from direct air flows, the Ultimate Comfort air conditioning will be particularly comfortable even in those situations in which one stays for a prolonged period of time in the immediate vicinity of the split, during sleep (thanks also to a "record" ” of only 18 dB ), or again for those particularly delicate subjects such as children and the elderly. All without affecting the diffusion of cold and/or heat: on the contrary, Ultimate Comfort guarantees air propagated at angles much higher than those allowed by traditional air conditioners. Vertically, the new Midea air conditioner reaches an angle of 110° (against the 80° of the more common products) which rises to 120° (against 90°) horizontally: the air thus arrives more uniformly even in the most remote points of the room , bringing benefits to every corner of the house. Air flow management An air flow that can be adjusted in maximum freedom, thanks to the possibility of controlling the direction of the air flow via the remote control, both on the vertical and on the horizontal axis. All for maximum comfort at 360°. Inverter Quattro technology The new Ultimate Comfort air conditioner, thanks to the exclusive Inverter Quattro technology , allows an intelligent and modulated use of energy resources, with minimum electricity consumption guaranteed by class A++/A++, while ensuring excellent performance and "top of the range" functions: from possibility of cooling the house despite external temperatures of 60°C, up to the instant cooling function, which thanks to the use of a high-frequency compressor satisfies any immediate cooling needs of the rooms of the house Air quality Midea air conditioners are designed to guarantee you an enveloping freshness and air quality that is always at the top. Equipped with self-cleaning technology, which allows for simplified maintenance, the Ultimate Comfort air conditioner also stands out for its Air Magic filtration system , which in addition to eliminating microbes and other harmful substances, offers all the advantages of ionisation, which intercepts and eliminates bacteria present suspended in the air, in order to make it not only fresh and/or warm, but also healthy, thus helping to contain any allergies to dust, pollen and other inhalable substances. All obviously controllable remotely via the Midea Air App installed on your smartphone, which allows you to take advantage of additional functions such as the weekly programming of the desired temperatures, as well as to monitor the daily, weekly and monthly consumption of Ultimate Comfort. Equipped with an intelligent sensor, Ultimate Comfort also guarantees control of the humidity level of the environment: in fact, the desired degree of humidity can be set, in a range between 30% and 90%. Integrated Wi-Fi control Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Series features: Self-diagnosis In the event of a breakdown, a fault code system allows users to report defects in a simple and clear way in order to quickly activate the assistance service Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and step-less linear modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The Ultimate Comfort units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Integrated Midea Smart Kit The indoor units of the Ultimate Comfort series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The Ultimate Comfort units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

IN THE ABSENCE OF THE PRODUCT THE NEXT BREEZELESS+ MODEL WILL BE SHIPPED Technical features Indoor Units Model Model: Ultimate Comfort MSMTAU-09HRFN Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 18-24-30-39.5 Sound power (Hi) dB(A) 54 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 886-188-315 ; 10.3kg Outdoor Unit Model: Catalog number: M2O-18FN8-Q Gases: R-32 Max indoor units that can be combined: 2 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 5.20 Absorbed power (Max): W 1750 SEER Seasonal energy efficiency: 6.3 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 289 Heating Nominal Capacity kW: 5.50 Absorbed power (Max): W 1450 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1680 Performance: Outdoor Unit Air Flow: m3/h 2200 External Unit Sound Pressure Max (dB(A)): 56 Sound power (Max) dB(A): 64 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 800x333x555 ; 36 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Ultimate Comfort Ultimate Comfort by Midea represents the extreme evolution of domestic air conditioning systems: thanks to the exclusive Silky Cool technology, in fact, the air flow emitted by the air conditioner is channeled through hundreds of tiny holes, which transform the "classic" jet of air, often the cause of stiff necks and colds, in a delicate and pleasant flow. The result for the user? All the comfort of a Midea air conditioning system without the inconvenience caused by a continuous jet of air on our body. In fact, sheltered from direct air flows, the Ultimate Comfort air conditioning will be particularly comfortable even in those situations in which one stays for a prolonged period of time in the immediate vicinity of the split, during sleep (thanks also to a "record" ” of only 18 dB ), or again for those particularly delicate subjects such as children and the elderly. All without affecting the diffusion of cold and/or heat: on the contrary, Ultimate Comfort guarantees air propagated at angles much higher than those allowed by traditional air conditioners. Vertically, the new Midea air conditioner reaches an angle of 110° (against the 80° of the more common products) which rises to 120° (against 90°) horizontally: the air thus arrives more uniformly even in the most remote points of the room , bringing benefits to every corner of the house. Air flow management An air flow that can be adjusted in maximum freedom, thanks to the possibility of controlling the direction of the air flow via the remote control, both on the vertical and on the horizontal axis. All for maximum comfort at 360°. Inverter Quattro technology The new Ultimate Comfort air conditioner, thanks to the exclusive Inverter Quattro technology , allows an intelligent and modulated use of energy resources, with minimum electricity consumption guaranteed by class A++/A++, while ensuring excellent performance and "top of the range" functions: from possibility of cooling the house despite external temperatures of 60°C, up to the instant cooling function, which thanks to the use of a high-frequency compressor satisfies any immediate cooling needs of the rooms of the house Air quality Midea air conditioners are designed to guarantee you an enveloping freshness and air quality that is always at the top. Equipped with self-cleaning technology, which allows for simplified maintenance, the Ultimate Comfort air conditioner also stands out for its Air Magic filtration system , which in addition to eliminating microbes and other harmful substances, offers all the advantages of ionisation, which intercepts and eliminates bacteria present suspended in the air, in order to make it not only fresh and/or warm, but also healthy, thus helping to contain any allergies to dust, pollen and other inhalable substances. All obviously controllable remotely via the Midea Air App installed on your smartphone, which allows you to take advantage of additional functions such as the weekly programming of the desired temperatures, as well as to monitor the daily, weekly and monthly consumption of Ultimate Comfort. Equipped with an intelligent sensor, Ultimate Comfort also guarantees control of the humidity level of the environment: in fact, the desired degree of humidity can be set, in a range between 30% and 90%. Integrated Wi-Fi control Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Series features: Self-diagnosis In the event of a breakdown, a fault code system allows users to report defects in a simple and clear way in order to quickly activate the assistance service Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and step-less linear modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The Ultimate Comfort units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Integrated Midea Smart Kit The indoor units of the Ultimate Comfort series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The Ultimate Comfort units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

MIDEA Ducted Air Conditioner Inverter R32 24000 BTU MTI-24FNXD0 A++ - NEW Model: Indoor unit code: MTI-24FNXD0 Outdoor unit code: MOU-24FN8-QD0 Power; 24000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance (Medium Season): 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 7.03 kW Power Output in heating: 7.6 kW Power absorbed in cooling: 2190 W Power absorbed in heating: 2040 W Indoor unit sound pressure (Min/Med/Max) (db(A)): 37-40-44 Internal unit sound power max db(A); 63 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Pipes Liquid / Gas Line: mm 9.52 / 15.88 Dimensions and weight: Indoor Unit (LxWxH): 1100-774-249 mm ; 31.5Kg Outdoor Unit (LxWxH): 845-363-702 mm; 66.8Kg Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Ducted R-32 Midea Air Recovery Reversible The air intake duct can be moved from the rear of the product (standard configuration) to the lower part of the same, replacing it with a sheet metal panel. In this way it is possible to make the product suitable for any installation condition. Ducted Units A6 The new range of A6 ductable units is characterized by more compact dimensions than the previous versions (height starting from 210 mm) and by a greater pressure available for the fans, to the full advantage of installation simplicity. The products are also equipped with an innovative function for automatically setting the rotation speed of the fan which allows the system to automatically adapt its work according to the ducts connected to the unit. G2 filters supplied To facilitate installation, Midea ducted units are supplied as standard with a G2 flat filter and filter holder frame. Condensate Lifting Pump The Midea 4-way Cassette indoor units are equipped with a pump for lifting the condensate liquid which allows it to be discharged at a height of 600 mm above the tray. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the return duct Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model: Indoor unit code: MSMABU-12HRDN1 Outdoor unit code: MOBA03-12HFN1 White color Technology: INVERTER Energy efficiency: Cooling efficiency SEER: 6.1 Coefficient of performance for medium-warm season SCOP: 4.0-4.6 Energy Efficiency Class (cooling): A++ Medium-hot season Energy Efficiency Class (heating): A+/A++ Annual energy consumption in cooling/heating: 201/846 KWh/A Performance: Cooling capacity: 3.52 kW Power absorbed in cooling: 1256 W Heating capacity: 3.81 kW Power absorbed in heating: 1186 W Indoor unit sound pressure (Min-Med-Max) (db(A)): 28.5-36-41.5 Internal unit sound power max db(A); 53 Max Outdoor Unit Sound Pressure (db(A)): 56 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/9.52(1/4"/3/8") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 805x205x285 mm; 7.5 kgs Outdoor Unit (LxDxH): 770x300x555 mm ; 26 kgs General characteristics MIDEA MA2 Series features: Self-diagnosis: In the event of a breakdown, a fault code system allows users to be notified of defects in a simple and clear manner in order to quickly activate the assistance service. 1 W Stand By : In the event of a prolonged stop, the indoor units completely remove the power supply to the outdoor unit, decreasing the electricity consumption in the Stand-By phase. Remote control The unit is equipped with an infrared remote control Condensation control : The MA2 units can operate in cooling mode even at low outside temperatures to air-condition technical rooms. Hydrophillic Aluminum: The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to corrosion and atmospheric agents. Eco function: This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product when used in cooling mode. Refrigerant leak alarm: If the temperatures of the refrigerant circuit are irregular due to refrigerant leaks, a specific fault code (EC) allows to identify this condition. GEAR function: The MA2 units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Follow Me function : The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function : In the event of failure of one of the product's sensors, operation can continue in emergency mode, until the faulty part is replaced. Deflector orientation memory: At each restart, the vertical air deflector is automatically positioned in the last used angle. "Do Not Disturb" mode By pressing a button on the remote control it is possible to silence all acoustic warnings, turn off the display of the internal unit and reduce the velocity of the internal fan to a rotation speed lower than the minimum, normally selectable. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less