Rinnai Universal Sanitary Recirculation Kit with Timer cod. RCD-XHF Dimensions (H x W x D) (mm) 330x275x152 Frontal Display Thermoregulation Pre-assembled kit that allows you to create domestic hot water recirculation systems for domestic users. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Acid Condensate Neutralizer Filter RBM mod. NT1 3286.05.00 Characteristics Cartridge holder body: Transparent PA polyamide Hose end caps / fittings: Polyamide PA Wall fixing collar: Polymer Neutralizing door net: AISI 304 stainless steel Neutralizing charge: CaCO3 (calcium carbonate) Hydraulic seals: EPDM PEROX RBM extension The installation of condensing boilers is spreading rapidly, also thanks to new regulatory obligations. However, these heat generators produce acid condensate which must be neutralized before being discharged so as not to cause damage to the home system pipes and the environment. With the installation of NT1 downstream of the boiler, the condensate passes inside the neutralizing cartridge, which changes the pH, bringing it back within the established limits, thus allowing it to drain freely, without damaging pipes, sinks or gutters. From acid pH to alkaline pH thanks to the heart in calcium carbonate granules. • Fights acid condensation corrosion • Resistant to chemical agents dissolved in the water vapor which condenses in the boiler • Quick and easy maintenance pH always under control NT1 allows you to keep the pH of the water at the drain always within the optimal limits, even in the event of a long permanence of the condensate liquid in the filter (for example in the case of switching off the system due to inactivity, during the night, etc.) . Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Dimensions 59x24x104h cm

Read more less

Water heater kit consisting of: 2 pcs 20/40 1/2 water 1 pc 20/40 1/2 gas Suitable for: • For water heaters, gas and hydraulic connections. Installation Tips: The hose must be installed without exposure to torsion. No torsional stress should occur during assembly or operation. Otherwise, the service life of the hose will be reduced. Both ends of the tube and the movement must be on the same plate. Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

To keep your firewood always in order, choose the woodshed. With 2 removable supports and 4 hooks for accessories, this iron log holder offers you a practical space in which to place branches and logs. The raised design allows you to keep moisture away from the wood , to always have it dry and ready for use. The indoor and outdoor log holder is also equipped with 4 fireplace accessories, so you will always have everything you need at hand. Characteristics - Perfect for keeping firewood and fireplace accessories in order - 2 removable holders and 4 hooks - Ideal for keeping wood away from humidity and drying it - Includes a shovel, broom, poker and tongs - Black metal with matte finish, durable and sturdy - For indoor and outdoor use - Classic style suitable for different environments Technical data - Color: Black - Material: Metal - Overall Dimensions: 84W x 33D x 76Hcm - Bottom shelf dimensions: 84L x 33Dcm - Top shelf dimensions: 32L x 29Dcm - Palette dimensions: 11L x 52Hcm - Toilet brush dimensions: 10L x 52Hcm - Poker dimensions: 5L x 52Hcm - Pliers dimensions: 11L x 52Hcm - Weight capacity: 100kg (lower shelf), 15kg (upper shelf)

Read more less

This radiator cover is designed to hide your radiator and add a touch of elegance to your home. Made of high quality MDF wood and with first-class workmanship. Suitable for any style of furniture. The cover has a grid design ideal for radiating heat efficiently. Easy to assemble with instructions included. Characteristics Made of MDF wood with refined finishes Simple yet contemporary design Ideal for hiding the radiator The front is lacquered with white paint Quick and easy assembly with accessories and instructions included Technical data Color: White Material: MDF wood Size: 78 × 82 × 19cm Internal size: 71.7x17x80.3cm

Read more less

100 cm EXTENSION FOR ITALKERO Ø 54 cm

Read more less

Don't worry about the mess in your fireplace corner, with the log holder everything will be within reach. This small log holder shelf has compact dimensions but allows you to store a large amount of logs. It is easy to assemble and is perfect to use as an indoor and outdoor log holder. It includes 4 fireplace tools, such as a shovel, brush, tongs and poker that, thanks to the hooks incorporated into the log holder, you can hang in an orderly manner. Characteristics - Powder coated steel frame for use as an indoor and outdoor log holder - Raised base to keep moisture away - Hooks for hanging tools - Accessories included: dustpan, broom, poker, tongs - Easy to assemble Technical data - Color: Black - Material: Steel - Overall dimensions: 46L x 30D x 70Hcm - Shelf Dimensions: 37.5L x 30Dcm - Palette dimensions: 11L x 56Dcm - Broom Dimensions: 10L x 54Dcm - Poker dimensions: 6L x 56Dcm - Pliers Size: 6L x 55Dcm - Weight capacity: 100kg

Read more less

Technical features Model : CR10 Product code : 7738111014 Dimensions (HxWxD): 82x82x23 mm Weight : 0,185 Kg Bosch CR10 modulating thermostat Adapt real consumption to the needs of the building Thermostats that can also be used remotely Simple wall installation of the thermostats and built-in temperature probe Remote control These thermostats can be used as remote control of the boiler or of the CW400 regulation or for the HPC400 regulation of the heat pump, finally as control of a zone in combination with the MZ100 module Real consumption Thanks to these thermostats, you can automatically adapt consumption to the real needs of the building, thanks to continuous modulation Can be installed on the wall The thermostats can be easily installed on the wall, with the function of thermostat, and are equipped with an internal ambient temperature probe Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Name : CONLIFT1 LS Product code : 98452219 EAN code : 5711495291235 Maximum flow rate : 0.167 l/s Maximum warhead: 5.5 m Approvals on nameplate : VDE, GOST Pump suction : 18-30 Pump delivery : 8-10 Pumped liquid : Any Newtonian fluid Maximum liquid temperature: 50° °C Density : 998.2 kg/m³ Minimum pH value : 2.7 Electrical data Absorbed power - P1 : 75 W Network frequency : 50Hz Rated voltage : 1 x 230V Rated current : 0.65A Protection class (IEC 34-5) : IP20 Insulation class (IEC 85) : F Cable length : 1.7m Cable plug type : NO PLUG Network cable : H05W-F36 Total volume of tank(s) : 2.65 l Net weight : 4,1 Kg Suitable for condensing boilers up to 200 kw, air conditioners, chillers CONLIFT1 LS Conlift1 is suitable for pumping condensate collected below sewer level or which cannot flow to the sewage system or building drain by means of a natural downward slope Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Technical features Model : DIRTMAG SLIM® Dirt separator with magnet For sub-boiler installation Technopolymer body Drain tap with hose holder Fitting for Wall Attachment: 3/4 M Fitting for Copper Pipe : Ø 18 and Ø 22 mm Maximum Working Pressure: 3 bar Temperature range : 0÷90°C DIRTMAGSLIM® 5451 The CALEFFI Dirtmagslim dirt separator is designed for installation under wall-mounted boilers on horizontal pipes and has very compact dimensions, so it can also be used where there is little space for installation. The installation is easy, the article has very small dimensions. The operating principle and the particular attention to design and construction make it the most efficient on the market. Its high performance is guaranteed by the powerful magnets which retain the impurities more effectively than other dirt separators and in a position away from that of the water flow, this also offers the advantage of not having pressure drops and performance alterations over time ; Dirtmagslim is created in such a way that it will never be clogged with residues and in any case the sludge discharge is easy since it does not need to be disassembled and can also be done with the system in use. Built with top quality materials, it is already equipped with the operating key for carrying out the cleaning operations which are carried out simply by unscrewing the lower part of the body and extracting the internal element to be cleaned. The connections are ¾” M x Ø 18, the fittings are in chromed brass, the drain cock is in brass and has a hose connection, the body and the deflector are made with the specific highly resistant PA66G30 technopolymer, the internal element is built in HDPE and the hydraulic seals are in EPDM. It resists to an operating temperature up to 90°C. and the maximum working pressure is 3 BAR Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferrari Misting Kit for Condensing Boilers Technical features: Supply voltage: 230 Vac 50 Hz +- 10% Engaged electric power: 50 W Maximum flow rate: 5L/h Maximum pressure: 16bar Operating temperature: 0 - 50° C - for lower temperatures yes recommends the installation of the appropriate insulated box (opt.) Maximum horizontal delivery (free outlet): 30 m Sound pressure (free exhaust): 35 dB(A) at a distance of 1.5 m Degree of protection: IP53 The Neby kit is specially made for dispersing the condensate generated by condensing boilers into the air through nebulisation . Its operation is completely automatic and it adapts optimally to the operation of the boiler thanks to a microprocessor. It can be installed outdoors, being resistant to rain (IP53 degree of protection); in case of very low temperatures it is advisable to protect the equipment with an insulated box (optional). The kit consists of: - 1 Neby condensate nebuliser - 1 Condenstop2 condensate neutraliser (code 061007) - 1 Condenstop2 refill cartridge (code 061008) - 1 meter of condensate drain pipe (code 120522) - 1 anchoring band (code 061078) - 1 nozzle holder L 200 mm (code 061081) - 5 meters of nebulizer hose (code 061082) - 2 straight hose holders (code 107207) - 2 curved hose holders (code 117087) - 2 shock absorbing bands of 15 cm each (cod.170519/15)

Read more less