Chronothermostat Room thermostat Beretta Hi Comfort 100 cod. 20193352

Read more less

INTAKE TERMINAL Ø 32 FOR ITALKERO

Read more less

ARISTON THERMOSTAT wi-fi with touch interface CUBE S NET cod. 3319126 Connect GENUS ONE, CLAS ONE and Cares Premium Cares S to the Ariston NET App Voice control thanks to the compatibility of the Ariston NET App with Amazon Alexa and Apple HomeKit Modulating technology Internet weather Plug&Play installation High Tech Italian style High resolution display with touch keys Cube S Net It is the new thermostat that includes Ariston NET connectivity. Large display and touch interface, easy to install and powered directly from the bus. It automatically downloads the outside temperature from the internet to further increase comfort at home, both in summer and winter. Wifi thermostat Integrated Ariston NET connectivity Hi-Tech Italian Design TFT display with touch keys Modulating technology Plug&Play installation External temperature via internet Remote control All the products in the catalog that have standard integrated connectivity offer the remote control service free of charge. In this way it will be possible to manage programming, monitor consumption and receive assistance* directly from your smartphone! Teleassistance By signing a maintenance contract, the Assistance Center can monitor the operation of the system 24 hours a day. In the event of a breakdown, it is able to intervene remotely or plan an inspection at the customer's premises. An excellent service for the maximum serenity of the customer. Compatibility: The room sensor is standard on Genus ONE NET boilers and can instead be integrated with all boilers in the BusBridgenet catalogue: GENUS ONE SYSTEM, CLAS ONE, CLAS ONE 30 L, CLAS ONE SYSTEM.

Read more less

Technical features The Omni Container kit has been designed to keep the installation space to a minimum for built-in boilers in external and internal walls. The lower part of the frame is equipped with the holes necessary for the water, gas, electricity, condensate drain connections and for the connection of the Remote Friend Command. In the upper part there are the holes for the exit to the flue ("type B" and "type C" installations) and to the intake duct (only for "type C" installation) with the use of the type of flue marked Immergas. Warning : The installation of the Omni Container kit inside the wall must ensure stable and effective support for the boiler. This kit ensures adequate support only if inserted correctly (according to the rules of good practice) by following the instructions below. The Omni Container kit is not a load-bearing structure and cannot replace the removed wall, so it is necessary to check its positioning inside the wall. For safety reasons, it is necessary to properly seal the housing compartment of the niche in the masonry wall, in compliance with current regulations. NB: leave the front drain holes located under the hatch (4) free. Otherwise, if water were to enter, it would not be able to get out. - Insert the frame in its seat, remembering to open the four support flaps (2) before inserting it. - Once the frame has been installed, the boiler can be inserted by hooking it to the support hooks located on the bottom of the frame itself. Dimensions (HxWxD): 1190x566x254 Product guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Compact Magnetic Dirt Remover Under Boiler RBM MAG-NET series 3892 3/4" CONSTRUCTION FEATURES Cartridge holder body: Polyamide PA66 + 30% FV Filter cartridge: AISI 304 Hydraulic seals: EPDM PEROX Magnets: B (Tmax) / B (Tamb)* < 1% (where Tmax = 130°C, Tamb = 21°C) Tested according to IEC 60404-5 & ASTM A977 standards neodymium REN35 B= 11000/12000 Gauss Attacks: System return: M 3/4'' Flat seat Boiler inlet: 3/4” swivel nut Flat seat UNI EN ISO 228 TECHNICAL FEATURES Compatible fluid: Water, water + glycol max pressure exercise: 3 Bars Working temperature: 0÷80°C Standard filter filtration degree: 800 µm RBM mag-net Supercompact Interception system included High efficiency Eliminate impurities Fights corrosion Extends the life of the boiler It guarantees the efficiency of the system DESCRIPTION OF THE OPERATING PRINCIPLE Through its effective and constant action, the magnetic filter collects all the impurities present in the system, preventing them from circulating inside it, thus avoiding wear and damage to the rest of the system components, in particular circulators and heat exchangers. heat. Mag-net exerts a continuous protective action on the boiler USE It is recommended to install Mag-net on the return circuit, at the boiler inlet, to protect it from all the impurities present in the system, especially during the start-up phase. Thanks to its compact size, it can be used under the boiler, in systems for domestic use, where installation spaces are very limited and therefore a traditional dirt separator would not fit. FILTRATION DEGREE Mag-net removes magnetic and non-magnetic particles that can cause damage to the installation during the first day of operation. The continuous passage of the fluid through the filter during normal operation of the system in which it is installed gradually leads to the complete removal of dirt. FILTRATION PRINCIPLE: Through a fixed path, the fluid is forced to pass through the mesh of the filter cartridge (800 µm) and enter the filtration chamber. In this filtration chamber through the simultaneous action of: - filter cartridge (direct mechanical filtration) - magnet - design choices regarding the filtration chamber section the water full of debris undergoes a filtration treatment. First of all, the sudden change in section (the filtration chamber has a larger diameter than the duct), slows down the motion of the fluid and consequently the entrainment speed of the particles suspended in it. Larger particles are stopped directly by the mechanical filter. The magnet, placed inside a cylinder positioned in the center of the filtration chamber, attracts all impurities with magnetic characteristics. Incoming stream Filter cartridge Magnet Filtration chamber Outgoing stream In this way all the magnetic (ferrous residues) and non-magnetic (algae, mud, sand, etc.) contaminants present in the system are retained in the filtration chamber. The standard stainless steel cartridge has been designed not to exert excessive resistance to the passage of the fluid (low pressure drops) and acts by direct mechanical filtration without affecting the operation of the heating/cooling system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Control Panel TOUCH LCD interface for INNOVA AirLeaf fan coil PI logic. Smartouch interface. 4 Modulating speed Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

First installation hydraulic kit Ariston Chaffoteaux cod. 3318224 The kit contains: Heating delivery/return pipes 3/4” Sanitary flow/return pipes 1/2” Gas fitting ø18 3/4” M gas cock Sanitary inlet tap 1/2” Compatibility: for Ariston GENUS/CLAS/EGIS boilers

Read more less

INSULATED HEATER COVER IN GALVANIZED SHEET METAL MAIN UNIVERSAL WHITE 870X480X350 Characteristics Insulated warmer cover in white painted galvanized sheet Dimensions: 870 x 480 x 350mm Heater cover The warmer cover that protects the external boilers from atmospheric agents, guaranteeing an elegant and durable aesthetic. The main kit is made in 3 versions: in pre-painted sheet metal, with peelable; in galvanized and enamelled sheet after the production process; in special aluminum resistant to corrosion even in the presence of the most aggressive atmospheric agents The KIT MAIN is assembled using corner elements inserted in the boxed profiles and blocked with clips. These boxed profiles allow you to hide the cuts in the sheet metal to guarantee users the best protection against accidents. The anti-cut system created on the panels allows safe assembly and easy installation. The upper panel of the MAIN KIT has a large opening, useful for the smoke outlets of the various heaters; another panel, designed for the insertion of our smoke vents, is placed below the previous one, closing all the spaces for a good seal against wind and rain. An opening of adequate dimensions is made on the lower panel for the passage of combustion air and to facilitate assembly of the various boiler utilities. The door is equipped with a universal lock, complete with steel knob and lock, as well as an elegant smoked porthole which allows an excellent view of the pilot flame and the burner. The KIT MAIN boiler covers are also available in the version for built-in boilers and all are supplied in a small case package for the optimization of transport and space. Supplied accessories: Corner fixing clips kit Angular Reversible panel Options: Convex porthole Grids in ABS Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

.

Read more less

This HOMCOM radiator cover is designed to hide the radiator and give a touch of elegance to your home. Made of high quality MDF wood and first class workmanship. Suitable for any style of furniture. The cover has a grid design that is ideal for radiating heat efficiently. Easy to assemble with instructions included.Features Made of MDF wood with refined finishes Simple but contemporary design Ideal for hiding the radiator The front is lacquered with white paint Quick and easy assembly with accessories and instructions included Technical data Colour: White Material: MDF wood Dimension : 111.5×82×19cm

Read more less

50cm EXTENSION FOR ITALKERO Ø 32

Read more less