Scopri i nostri gruppi di pressione per un sistema idrico efficiente e affidabile. Regola e mantieni costante la pressione dell'acqua in modo automatico, assicurando un flusso costante in tutta la tua casa o edificio. Scegli la qualità dei nostri gruppi di pressione per un comfort idrico senza compromessi.
Caratteristiche Tecniche
Modello : CONLIFT1
Potenza assorbita : P1 = 70 W
Corrente I : 0,65 A
Lunghezza cavo : 1,7 m
Temperatura di immagazzinamento : Serbatoio vuoto: da -10 °C a +50 °C
Se immagazzinata in luogo asciutto : Serbatoio con condensa: sopra 0 °C (possibilità di gelo non ammissibile)
Temperatura ambiente : da +5 °C a +35 °C.
Temperatura media liquido : +50 °C
Temperatura massima liquido : +90 °C per 5 minuti
Massima prevalenza : 5,5 m
Portata massima : 600 l/h
Classe di isolamento: F
Classe di protezione : IP24
Peso : 2,0 Kg
Volume utile: 0,9 l
Adatta per caldaie a condensazione fino 200 kw , climatizzatori , refrigeratori
CONLIFT1
La nuova CONLIFT di Grundfos è una gamma professionale di pompe per la rimozione della condensa compatte e silenziose. Questi prodotti vengono utilizzati quando non è possibile il drenaggio naturale della condensa o quando la condensa viene originata al di sotto del livello locale del rigurgito.
La gamma CONFLIT è stata progettata in modo tale da comprendere caratteristiche brevettate esclusive che rendono il prodotto estremamente robusto, in particolare quando deve trattare con condense aggressive, provenienti ad esempio dalle caldaie a gas a condensazione.
Sono compresi tutti gli elementi necessari per l'installazione e, una volta installate, le unità funzionano automaticamente. Le funzioni integrate garantiscono l'avvio dell'unità solo quando richiesto.
L'installazione risulta semplificata dall'inserimento di un tubo di drenaggio di 6 m oltre agli adattatori di connessione necessari che rendono l'installazione più semplice. L'intelligente sistema di equilibratori e l'unità motore/pompa garantiscono la regolazione dell'unità per soddisfare esigenze di installazione specifiche.
La gamma comprende 3 varianti e tutte le versioni sono dotate di motore che non necessita manutenzione comprendente una protezione termica di sovracorrente.
CONLIFT1, la versione base, comprende un allarme cablato che può essere utilizzato per attivare un dispositivo di allarme esterno o per disinnestare la fonte della condensa in caso di elevato livello dell'acqua all'interno dell'unità.
Applicazioni
L'applicazione classica è per la condensa di caldaie a gas a condensazione, comignoli, condizionatori, deumidificatori e frigoriferi.
Caratteristiche e vantaggi
Funzionamento molto silenzioso e affidabile
Manutenzione per il motore comprendente la protezione termica
Numero di avvii ridotto
Fino a quattro raccordi in entrata
Tutti materiali di installazione sono compresi
Adatto per un livello di pH > 2,5 da neutralizzazione
Paraspruzzi IP24
Pulsante di prova manuale per il controllo del funzionamento
Sistema con interruttore a galleggiante altamente affidabile
Sistema di immissione intelligente con arresto della sedimentazione e dell'evaporazione
Protezione speciale del sigillo dell'asse
Valvola di non ritorno installata con chiusura a baionetta per sgancio rapido
Opzioni di upgrade/riconfigurazione
Unità con tester pH per monitorare la capacità di neutralizzazione
Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 12 mesi dalla data dell'acquisto
GRUNDFOS SHREDDER LIFTING STATION model: SOLOLIFT2 WC-3
Model: SOLOLIFT2 WC-3
Possible connections 1 toilet and up to three other connections, such as: washbasin, shower, urinal, bidet
Power Consumption Max. 620W
Power supply 1 x 220-240V - 10%/+6%, 50Hz
Net weight 7.3kg
Liquid temperature Max. 50°C
Rated current 3.0A
Flow rate Max. 149 l/min.
Pump head Max. 8.5 m
Power cable 1.2 m, 0.75 mm2
Start/stop levels
- Boot: 72 mm above the bottom
- Stop: 52 mm above the bottom
S3 operation - 50% - 1 min. (30 sec on; 30 sec off)
Inlet pipes Diameter of 32/36/40/50 mm
Exhaust pipe Diameter of 22/25/28/32/36/40 mm
SOLOLIFT 2
SOLOLIFT2 is an exclusive range of compact lifting stations which allows the drainage of any domestic sanitary device where required, independent of the gravity drainage system system. The units collect and pump the waste water via a thin pipe (> 23mm) to the next downpipe - height up to 6m or 100m away. With SOLOLIFT2 an extra toilet or full bathroom in the attic or basement will no longer be just a wish.
The range includes 5 variants of compact lifting stations for the disposal of domestic wastewater.
3 units called WC-1, WC-3 and CWC-3 have been designed to take waste water from a toilet and other sanitary fixtures.
Two units called C-2 and D-2 were designed to remove (hot) waste water from a toilet, shower, washbasin, sink, washing machine and dishwasher.
SOLOFIT2 has been designed according to the needs of professionals according to characteristics of high reliability and easy and clean maintenance. The units are plugged in, ready for use and their operation is fully automatic from the moment water enters the tank .
The Grundfos SOLOLIFT2 range of lifting stations offer the most reliable wastewater management for any combination of toilet, bidet, sink, shower and washing machine regardless of the placement of the sanitary fixture within a building. Get flexibility, adaptability and improved performance with SOLOLIFT2. Due to its independence from the main sewer, SOLOLIFT2 only needs a simple 20mm delivery pipe, making it ideal for modern life. With its unique features, such as the integrated float switch unit with two start level options*, it is possible to control the volume adjustment according to the connected sanitary device, without the need for additional accessories. Simply choose a low start level for slimline contemporary shower trays, or increase pump volume for scrubbing or tub draining applications.
The WC-3 model has 3 additional delivery connections, suitable for pumping domestic wastewater from a shower, bidet, washbasin and toilet with horizontal outlet.
Powerful professional shredder
Simple installation and replacement of the product
Clean and trouble-free maintenance
Reliability
1 - Pressure tight, welded tank design.
2 - Robust grinder, able to handle even the occasional discharge of hygiene products.*
3 - Powerful motor with special winding.
Easy maintenance
4 - Dry engine design for easy and clean maintenance. Motor, pump and control unit are integrated in one body for easier maintenance and replacement. SOLOLIFT2 will remain in place for the entire service.
5 - The self-adjusting automatic joint simplifies assembly in case of maintenance.
6 - All screws are captive type.
7 - Manual anti-clogging function.
8 - Drainage function separated by drainage socket and hose.
9 - The pressure switch control is external to the tank, therefore there are no moving parts inside the waste water.
Substitutability
10 - More compact design. It can easily replace any macerator product on the market. Selectable outlet direction for easy replacement.
11 - Connectors adjustable in height, adaptable.
Low maintenance
12 - Innovative bottom design with strong bevel and self-cleaning function to prevent sedimentation.
Easy installation
13 - The lifting fastening with clips makes the SOLOLIFT2 easy to install.
14 - Alarm device easily retrofitted - just insert a small alarm with buzzer.
15 - One engine for all models.
* Disposal of sanitary products is NOT recommended
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
Technical features
Very compact variant for pumping waste water from 2 different sanitary devices: 1x washbasin, 1x shower cubicle or bidet
Drain connection: ∅ 22/32
Filling connection: 2x ∅ 36/40/50 on the left and right sides of the tank
Data sheet
Hot water resistant up to 90°C for 30 minutes (C-3)
Pressure proof tanks capable of withstanding up to 2.5m of water column
360° rotating discharge connection, for vertical and horizontal assembly
Flexible drain connection with 6 different pipe diameters to connect
Flexible loading attachment with 4 different connection diameters
Start level adjustable according to application (C-3)
Including non-return valve ready to install
Compact detachable and dry pump-motor unit
Dry and clean access to the level switch
Tank drainage function
Manual release system with screwdriver, without having to open the unit
In case of maintenance, the unit does not need to be removed
Optional alarm device
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
Grundfos submersible single impeller single phase electric pump for sewage in stainless steel ap 35b.50.06.a1 96004562
General characteristics
Brand: Grundfos
Model: ap 35b.50.06.a1
Code: 96004562
Data sheet
Max flow rate: 5l/s
Max head: 11 m
Impeller type: VORTEX
Max. Particle: 35mm
Material
Pump body: Stainless steel EN 1.4301 AISI 304
Impeller Steel: stainless steel EN 1.4301 AISI 304
Installation
Ambient temperature limit: 0 .. 40 °C
Connection type: Rp
Size attack: 2 inch
max. depth of installation: 2 m
Inst. dry/submerged room: S
Auto Pairing: Y
Liquid
Liquid temperature range: 0 .. 40 °C
Density: 998.2 kg/m³
Electrical data
P1 power input: 1 kW
Engine type: 1-phase PSC
Rated power - P2 :0.66 kW
Network frequency: 50Hz
Rated Voltage: 1 x 230V
Rated Current: 4.6A
Cos phi - power factor: 0.98
Rated Transmission Speed: 2810rpm
Capacitor capacity - run: 16 µF/400 V
Protection class (IEC 34-5): IP68
Insulation class (IEC 85): F
Integrated motor protection: CONTACT
Thermal protection: internal
Electric cable length: 5 m
Cable plug type: SCHUKO
Checks
Level switch: Float
Other
Net weight: 9.9kg
Gross weight: 11.6kg
Description
Useful to:
Wastewater - Commercial buildings
Domestic wastewater
Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
Grundfos submersible single impeller single phase electric pump for sewage in stainless steel ap35b.50.08.a1 96004574
General characteristics
Brand: Grundfos
Model: ap35b.50.08.a1
Code: 96004574
Data sheet
Maximum flow rate: 5.83 l/s
Max head: 13 m
Impeller type: VORTEX
Max. Particle: 35mm
Material
Pump body: Stainless steel EN 1.4301 AISI 304
Impeller Steel: stainless steel EN 1.4301 AISI 304
Installation
Ambient temperature limit: 0 .. 40 °C
Connection type: Rp
Size attack: 2 inch
max. depth of installation: 2 m
Inst. dry/submerged room: S
Auto Pairing: Y
Liquid
Liquid temperature range: 0 .. 40 °C
Density: 998.2 kg/m³
Electrical data
P1 power input: 1.25 kW
Engine type: 1-phase PSC
Rated power - P2 :0.71 kW
Network frequency: 50Hz
Rated Voltage: 1 x 230V
Rated Current: 5.44A
Cos phi - power factor: 0.98
Rated Drive Speed: 2795rpm
Capacitor capacity - run: 16 µF/400 V
Protection class (IEC 34-5): IP68
Insulation class (IEC 85): F
Integrated motor protection: CONTACT
Thermal protection: internal
Electric cable length: 5 m
Cable plug type: SCHUKO
Checks
Level switch: Float
Other
Net weight: 11kg
Gross weight: 12kg
Description
Useful to:
Wastewater - Commercial buildings
Domestic wastewater
Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
Grundfos electric pump for clear water drainage completely in stainless steel UNILIFT KP 250 A1 012H1600
General characteristics
Brand: Grundfos
Supplied model: UNILIFT KP 250 A1
Supplied model number: 012H1600
Data sheet
Maximum flow rate: 3.11 l/s
Max head: 7.5 m
Max. Particle: 10mm
Model: A
Material
Pump body: Stainless steel EN 1.4301 AISI 304
Impeller Stainless steel: EN 1.4301, AISI 304
Installation
Ambient temperature limit. 0 .. 50 °C
Connection type. Rp
Size attack. 1 1/4 inch
max. depth installation. 2 m
Liquid
Liquid temperature range. 0 .. 50 °C
Density. 998.2 kg/m³
Electrical data
Absorbed power - P1. 480W
Network frequency. 50Hz
Nominal tension. 1 x 220-230V
Rated current. 2.3A
Capacitor capacity - run. 8 µF/400 V
Protection class (IEC 34-5). IP68
Insulation class (IEC 85). f
Integrated motor protection. CONTACT
Thermal protection. internal
Electric cable length. 5 m
Cable plug type. SCHUKO
Checks
Level switch: Float
Other
Net weight. 6.42kg
Gross weight. 7.11kg
Packing volume. 0.013 m³
Description
Useful to:
Wastewater - Commercial buildings
Domestic wastewater
Industrial waste water
Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and gray wastewater such as sewage and domestic sewage with particles up to 10 mm. The pump can be used as a portable unit or fixed installation inside and outside buildings.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
Technical features
Model : SCALA2
Maximum ambient temperature 55°C
Nominal flow rate : 3 m 3 /h
Adjustable constant pressure: min 1.5 bar / max 5.5 * bar
Maximum inlet pressure: 6 bar - (*) 1.5 bar required to reach 5.5 bar
Supply voltage: 1 x 220-240V, 50/60Hz
Noise level: <47dB (A) (indoor installation)
Maximum liquid temperature 45°C
Maximum system pressure 10 bar
IP class X4D (outdoor installation)
Max. 3 floors
Taps Max. 8
Dimensions
Height: 302mm
Length: 403mm
Width: 193mm
Weight 10kg
Scale2
Optimal water pressure - Small size and easy to install
SCALA2 is a fully integrated booster pump that generates optimum water pressure in all taps simultaneously, even when several taps are opened at the same time and even when the shower is in use. It is equipped with pump, motor, tank, sensor, frequency converter and non-return valve; all in one compact unit. With intelligent pump control, SCALA2 automatically adapts performance based on suction pressure and water usage in the home. Thanks to the water-cooled motor, SCALA2 enjoys a very low noise level, similar to that of a modern dishwasher
What is intelligent pump control?
SCALA2 is equipped with a pre-installed sensor which constantly measures the delivery pressure. In the event that the pressure is lower than that requested, SCALA2 will intervene immediately to increase it. This is intelligent pump control; the result is optimal water pressure
Advantages
Optimum water pressure: The intelligent pump control adapts the pump operation automatically
Low Noise: Noise is similar to a modern dishwasher (47 dB(A) during normal use)
Simplified selection: One model for all domestic pressure boosting needs
Easy installation: Small size, fully integrated solution, plug & pump
Easy to set up: Intuitive dashboard
Reliable operation: Dry-running and anti-cyclic protection
Long life: High quality and low maintenance
Applications
SCALA2 is the right choice for residential buildings up to 3 floors and 8 taps.
Pressure increase from the mains : Increases the pressure of the water supplied by the mains Tank Pressure Boost : Increases water pressure from rooftop tanks, intermediate tanks and ground tanks, including rainwater tanks. Pressure increase from wells : The maximum suction depth is 8 metres
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
Single-stage self-priming Grundfos electric pump for clear water jp4-47 99458767
General characteristics
Brand: Grundfos
Supplied model: jp4-47
Supplied model number: 99458767
Data sheet
Nominal flow rate: 4 m³/h
Max warhead: 47m / 47m
Primary mechanical seal: BBVP
Approvals on nameplate: CE,EAC
Curve tolerance: ISO9906:2012 3B
Model: A
Material
Pump body: Stainless steel EN 1.4301 AISI 304
Impeller: Composite
Material code: S
Installation
Ambient temperature limit: 0 .. 40 °C
Max operating pressure: 6 bar
Max suction pressure: 1 bar
Pump suction: G1
Pump delivery : G1
Liquid
Pumped liquid Water
Liquid temperature range 0 .. 40 °C
Liquid temperature during operation 20 °C
Density 998.2 kg/m³
Electrical data
Absorbed power - P1: 850 W
rated power - P2: 0.56 kW
Network frequency: 50Hz
Rated Voltage: 1 x 230V
Rated Current: 3.8A
Starting Current: 11.3A
Rated Transmission Speed: 2800rpm
Capacitor capacity - run: 12 µF/450 V
Protection class (IEC 34-5): IP44
Insulation class (IEC 85:) F
Cable plug type: SCHUKO
Cable: Y
Checks
Presscontrol: Without presscontrol
Switch: On/Off switch not included
Description
The electric pump has been designed for the supply of clear water and other moderately aggressive liquids; it is the ideal choice for use in private homes, country houses and gardens.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
Single-stage self-priming Grundfos electric pump for clear water jp5-48 99458769
General characteristics
Brand: Grundfos
Supplied model: jp5-48
Supplied model number: 99458769
Data sheet
Nominal flow rate: 5 m³/h
Max warhead: 48.3m / 48.3m
Primary mechanical seal: BBVP
Approvals on nameplate: CE,EAC
Curve tolerance: ISO9906:2012 3B
Model: A
Material
Pump body: Stainless steel EN 1.4301 AISI 304
Impeller: Composite
Material code: S
Installation
Ambient temperature limit: 0 .. 40 °C
Max operating pressure: 6 bar
Max suction pressure: 1 bar
Pump suction: G1
Pump delivery : G1
Liquid
Pumped liquid Water
Liquid temperature range 0 .. 40 °C
Liquid temperature during operation 20 °C
Density 998.2 kg/m³
Electrical data
Absorbed power - P1: 1490 W
rated power - P2: 1,014 kW
Network frequency: 50Hz
Rated Voltage: 1 x 230V
Rated Current: 6.6A
Starting Current: 27.9A
Rated Transmission Speed: 2800rpm
Capacitor capacity - run: 12 µF/450 V
Protection class (IEC 34-5): IP44
Insulation class (IEC 85:) F
Cable plug type: SCHUKO
Cable: Y
Checks
Presscontrol: Without presscontrol
Switch: On/Off switch not included
Description
The electric pump has been designed for the supply of clear water and other moderately aggressive liquids; it is the ideal choice for use in private homes, country houses and gardens.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
Technical features
Model : UNILIFT CC 7 A1
Mouth size ; G 1 1/4
Power : 0.38 kW / 0.51 HP
Intensity : 1.80A
Cable : 10m
UNILIFT CC
The Unilift CC pump is a single stage submersible drainage pump designed for pumping drainage water and gray waste water. The Unilift CC pump is capable of drawing water up to a level of 3 mm above the floor, by removing the filter. The Unilift CC pump is suitable for permanent and temporary installations. The Unilift CC pump is equipped with a non-return flapper valve on the discharge port to prevent backflow from the piping. An adapter ensures the right connections to 3/4" or 1 1/4" discharge ports.
The filter is made of stainless steel while the main parts of the pump, such as the body and the housing, are made of molded composite materials.
The Multibox B-CC7 is a Unilift CC pump combined with further elements such as a tube with Storz coupling, adapter for threaded Storz coupling and a box with perforated mesh sides to be used as a pre-filter for the pump. It is the perfect solution to use as an emergency kit for single family homes in the event of a flood.
Applications
The Unilift CC pump has been designed for the following pumping:
Water and rainwater in agriculture
River and lake water
Rain and drainage water
Water for filling/emptying tanks, ponds, tanks, etc.
Effluents from downpours, washing machines and wells below the level of the sewer system
Pool water
Ditch drainage water
Groundwater (lowering applications)
Effluents from viaducts, underpasses, etc.
Drainage from splinker systems in garages.
Features and Benefits
Composite materials
Stainless steel filter
Automatic vent valve on the handle
Available with level switch
Suitable for low suction levels
Compact shape for easy moving and cleaning
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase
Grundfos submersible single-impeller three-phase electric pump for sewage in stainless steel ap 50b.50.11.3 96004601 WITHOUT SHUKO PLUG
General characteristics
Brand: Grundfos
Model: ap 50b.50.11.3
Code: 96004601
Data sheet
Max flow rate: 8.06 l/s
Max head: 14 m
Impeller type: VORTEX
Max. Particle: 50mm
Material
Pump body: Stainless steel EN 1.4301 AISI 304
Impeller Steel: stainless steel EN 1.4301 AISI 304
Installation
Ambient temperature limit: 0 .. 40 °C
Connection type: Rp
Size attack: 2 inch
max. depth of installation: 2 m
Inst. dry/submerged room: S
Auto Pairing: Y
Liquid
Liquid temperature range: 0 .. 40 °C
Density: 998.2 kg/m³
Electrical data
P1 power input: 1.75 kW
Rated power - P2 : 1.31 kW
Network frequency: 50Hz
Rated Voltage: 3 x 400V
Rated Current: 2.81A
Cos phi - power factor: 0.90
Rated Drive Speed: 2785rpm
Capacitor capacity - run: 16 µF/400 V
Protection class (IEC 34-5): IP68
Insulation class (IEC 85): F
Integrated motor protection: NONE
Thermal protection: external
Electric cable length: 5 m
Cable plug type: NONE
Other
Net weight: 11.4kg
Gross weight: 13.4kg
Description
Useful to:
Wastewater - Commercial buildings
Domestic wastewater
Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
Single-stage self-priming Grundfos electric pump for clear water jp4-54 99458768
General characteristics
Brand: Grundfos
Supplied model: jp4-54
Supplied model number: 99458768
Data sheet
Nominal flow rate: 4 m³/h
Max warhead: 50m / 50m
Primary mechanical seal: BBVP
Approvals on nameplate: CE,EAC
Curve tolerance: ISO9906:2012 3B
Model: A
Material
Pump body: Stainless steel EN 1.4301 AISI 304
Impeller: Composite
Material code: S
Installation
Ambient temperature limit: 0 .. 40 °C
Max operating pressure: 6 bar
Max suction pressure: 1 bar
Pump suction: G1
Pump delivery : G1
Liquid
Pumped liquid Water
Liquid temperature range 0 .. 40 °C
Liquid temperature during operation 20 °C
Density 998.2 kg/m³
Electrical data
Absorbed power - P1: 1130 W
rated power - P2: 0.746 kW
Network frequency: 50Hz
Rated Voltage: 1 x 230V
Rated Current: 5.1A
Starting Current: 17.8A
Rated Transmission Speed: 2800rpm
Capacitor capacity - run: 12 µF/450 V
Protection class (IEC 34-5): IP44
Insulation class (IEC 85:) F
Cable plug type: SCHUKO
Cable: Y
Checks
Presscontrol: Without presscontrol
Switch: On/Off switch not included
Description
The electric pump has been designed for the supply of clear water and other moderately aggressive liquids; it is the ideal choice for use in private homes, country houses and gardens.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.
