Caratteristiche Tecniche Modello : CONLIFT1 Potenza assorbita : P1 = 70 W Corrente I : 0,65 A Lunghezza cavo : 1,7 m Temperatura di immagazzinamento : Serbatoio vuoto: da -10 °C a +50 °C Se immagazzinata in luogo asciutto : Serbatoio con condensa: sopra 0 °C (possibilità di gelo non ammissibile) Temperatura ambiente : da +5 °C a +35 °C. Temperatura media liquido : +50 °C Temperatura massima liquido : +90 °C per 5 minuti Massima prevalenza : 5,5 m Portata massima : 600 l/h Classe di isolamento: F Classe di protezione : IP24 Peso : 2,0 Kg Volume utile: 0,9 l Adatta per caldaie a condensazione fino 200 kw , climatizzatori , refrigeratori CONLIFT1 La nuova CONLIFT di Grundfos è una gamma professionale di pompe per la rimozione della condensa compatte e silenziose. Questi prodotti vengono utilizzati quando non è possibile il drenaggio naturale della condensa o quando la condensa viene originata al di sotto del livello locale del rigurgito. La gamma CONFLIT è stata progettata in modo tale da comprendere caratteristiche brevettate esclusive che rendono il prodotto estremamente robusto, in particolare quando deve trattare con condense aggressive, provenienti ad esempio dalle caldaie a gas a condensazione. Sono compresi tutti gli elementi necessari per l'installazione e, una volta installate, le unità funzionano automaticamente. Le funzioni integrate garantiscono l'avvio dell'unità solo quando richiesto. L'installazione risulta semplificata dall'inserimento di un tubo di drenaggio di 6 m oltre agli adattatori di connessione necessari che rendono l'installazione più semplice. L'intelligente sistema di equilibratori e l'unità motore/pompa garantiscono la regolazione dell'unità per soddisfare esigenze di installazione specifiche. La gamma comprende 3 varianti e tutte le versioni sono dotate di motore che non necessita manutenzione comprendente una protezione termica di sovracorrente. CONLIFT1, la versione base, comprende un allarme cablato che può essere utilizzato per attivare un dispositivo di allarme esterno o per disinnestare la fonte della condensa in caso di elevato livello dell'acqua all'interno dell'unità. Applicazioni L'applicazione classica è per la condensa di caldaie a gas a condensazione, comignoli, condizionatori, deumidificatori e frigoriferi. Caratteristiche e vantaggi Funzionamento molto silenzioso e affidabile Manutenzione per il motore comprendente la protezione termica Numero di avvii ridotto Fino a quattro raccordi in entrata Tutti materiali di installazione sono compresi Adatto per un livello di pH > 2,5 da neutralizzazione Paraspruzzi IP24 Pulsante di prova manuale per il controllo del funzionamento Sistema con interruttore a galleggiante altamente affidabile Sistema di immissione intelligente con arresto della sedimentazione e dell'evaporazione Protezione speciale del sigillo dell'asse Valvola di non ritorno installata con chiusura a baionetta per sgancio rapido Opzioni di upgrade/riconfigurazione Unità con tester pH per monitorare la capacità di neutralizzazione Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 12 mesi dalla data dell'acquisto

Read more less

GRUNDFOS SHREDDER LIFTING STATION model: SOLOLIFT2 WC-3 Model: SOLOLIFT2 WC-3 Possible connections 1 toilet and up to three other connections, such as: washbasin, shower, urinal, bidet Power Consumption Max. 620W Power supply 1 x 220-240V - 10%/+6%, 50Hz Net weight 7.3kg Liquid temperature Max. 50°C Rated current 3.0A Flow rate Max. 149 l/min. Pump head Max. 8.5 m Power cable 1.2 m, 0.75 mm2 Start/stop levels - Boot: 72 mm above the bottom - Stop: 52 mm above the bottom S3 operation - 50% - 1 min. (30 sec on; 30 sec off) Inlet pipes Diameter of 32/36/40/50 mm Exhaust pipe Diameter of 22/25/28/32/36/40 mm SOLOLIFT 2   SOLOLIFT2 is an exclusive range of compact lifting stations which allows the drainage of any domestic sanitary device where required, independent of the gravity drainage system system. The units collect and pump the waste water via a thin pipe (> 23mm) to the next downpipe - height up to 6m or 100m away. With SOLOLIFT2 an extra toilet or full bathroom in the attic or basement will no longer be just a wish. The range includes 5 variants of compact lifting stations for the disposal of domestic wastewater. 3 units called WC-1, WC-3 and CWC-3 have been designed to take waste water from a toilet and other sanitary fixtures. Two units called C-2 and D-2 were designed to remove (hot) waste water from a toilet, shower, washbasin, sink, washing machine and dishwasher. SOLOFIT2 has been designed according to the needs of professionals according to characteristics of high reliability and easy and clean maintenance. The units are plugged in, ready for use and their operation is fully automatic from the moment water enters the tank . The Grundfos SOLOLIFT2 range of lifting stations offer the most reliable wastewater management for any combination of toilet, bidet, sink, shower and washing machine regardless of the placement of the sanitary fixture within a building. Get flexibility, adaptability and improved performance with SOLOLIFT2. Due to its independence from the main sewer, SOLOLIFT2 only needs a simple 20mm delivery pipe, making it ideal for modern life. With its unique features, such as the integrated float switch unit with two start level options*, it is possible to control the volume adjustment according to the connected sanitary device, without the need for additional accessories. Simply choose a low start level for slimline contemporary shower trays, or increase pump volume for scrubbing or tub draining applications. The WC-3 model has 3 additional delivery connections, suitable for pumping domestic wastewater from a shower, bidet, washbasin and toilet with horizontal outlet. Powerful professional shredder Simple installation and replacement of the product Clean and trouble-free maintenance Reliability 1 - Pressure tight, welded tank design. 2 - Robust grinder, able to handle even the occasional discharge of hygiene products.* 3 - Powerful motor with special winding. Easy maintenance 4 - Dry engine design for easy and clean maintenance. Motor, pump and control unit are integrated in one body for easier maintenance and replacement. SOLOLIFT2 will remain in place for the entire service. 5 - The self-adjusting automatic joint simplifies assembly in case of maintenance. 6 - All screws are captive type. 7 - Manual anti-clogging function. 8 - Drainage function separated by drainage socket and hose. 9 - The pressure switch control is external to the tank, therefore there are no moving parts inside the waste water. Substitutability 10 - More compact design. It can easily replace any macerator product on the market. Selectable outlet direction for easy replacement. 11 - Connectors adjustable in height, adaptable. Low maintenance 12 - Innovative bottom design with strong bevel and self-cleaning function to prevent sedimentation. Easy installation 13 - The lifting fastening with clips makes the SOLOLIFT2 easy to install. 14 - Alarm device easily retrofitted - just insert a small alarm with buzzer. 15 - One engine for all models. * Disposal of sanitary products is NOT recommended Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Very compact variant for pumping waste water from 2 different sanitary devices: 1x washbasin, 1x shower cubicle or bidet Drain connection: ∅ 22/32 Filling connection: 2x ∅ 36/40/50 on the left and right sides of the tank Data sheet Hot water resistant up to 90°C for 30 minutes (C-3) Pressure proof tanks capable of withstanding up to 2.5m of water column 360° rotating discharge connection, for vertical and horizontal assembly Flexible drain connection with 6 different pipe diameters to connect Flexible loading attachment with 4 different connection diameters Start level adjustable according to application (C-3) Including non-return valve ready to install Compact detachable and dry pump-motor unit Dry and clean access to the level switch Tank drainage function Manual release system with screwdriver, without having to open the unit In case of maintenance, the unit does not need to be removed Optional alarm device Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Grundfos submersible single impeller single phase electric pump for sewage in stainless steel ap 35b.50.06.a1 96004562 General characteristics Brand: Grundfos Model: ap 35b.50.06.a1 Code: 96004562 Data sheet Max flow rate: 5l/s Max head: 11 m Impeller type: VORTEX Max. Particle: 35mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 1 kW Engine type: 1-phase PSC Rated power - P2 :0.66 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Rated Current: 4.6A Cos phi - power factor: 0.98 Rated Transmission Speed: 2810rpm Capacitor capacity - run: 16 µF/400 V Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: CONTACT Thermal protection: internal Electric cable length: 5 m Cable plug type: SCHUKO Checks Level switch: Float Other Net weight: 9.9kg Gross weight: 11.6kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Grundfos submersible single impeller single phase electric pump for sewage in stainless steel ap35b.50.08.a1 96004574 General characteristics Brand: Grundfos Model: ap35b.50.08.a1 Code: 96004574 Data sheet Maximum flow rate: 5.83 l/s Max head: 13 m Impeller type: VORTEX Max. Particle: 35mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 1.25 kW Engine type: 1-phase PSC Rated power - P2 :0.71 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Rated Current: 5.44A Cos phi - power factor: 0.98 Rated Drive Speed: 2795rpm Capacitor capacity - run: 16 µF/400 V Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: CONTACT Thermal protection: internal Electric cable length: 5 m Cable plug type: SCHUKO Checks Level switch: Float Other Net weight: 11kg Gross weight: 12kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Grundfos electric pump for clear water drainage completely in stainless steel UNILIFT KP 250 A1 012H1600 General characteristics Brand: Grundfos Supplied model: UNILIFT KP 250 A1 Supplied model number: 012H1600 Data sheet Maximum flow rate: 3.11 l/s Max head: 7.5 m Max. Particle: 10mm Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Stainless steel: EN 1.4301, AISI 304 Installation Ambient temperature limit. 0 .. 50 °C Connection type. Rp Size attack. 1 1/4 inch max. depth installation. 2 m Liquid Liquid temperature range. 0 .. 50 °C Density. 998.2 kg/m³ Electrical data Absorbed power - P1. 480W Network frequency. 50Hz Nominal tension. 1 x 220-230V Rated current. 2.3A Capacitor capacity - run. 8 µF/400 V Protection class (IEC 34-5). IP68 Insulation class (IEC 85). f Integrated motor protection. CONTACT Thermal protection. internal Electric cable length. 5 m Cable plug type. SCHUKO Checks Level switch: Float Other Net weight. 6.42kg Gross weight. 7.11kg Packing volume. 0.013 m³ Description Useful to: Wastewater - Commercial buildings Domestic wastewater Industrial waste water Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and gray wastewater such as sewage and domestic sewage with particles up to 10 mm. The pump can be used as a portable unit or fixed installation inside and outside buildings. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Model : SCALA2 Maximum ambient temperature 55°C Nominal flow rate : 3 m 3 /h Adjustable constant pressure: min 1.5 bar / max 5.5 * bar Maximum inlet pressure: 6 bar - (*) 1.5 bar required to reach 5.5 bar Supply voltage: 1 x 220-240V, 50/60Hz Noise level: <47dB (A) (indoor installation) Maximum liquid temperature 45°C Maximum system pressure 10 bar IP class X4D (outdoor installation) Max. 3 floors Taps Max. 8 Dimensions Height: 302mm Length: 403mm Width: 193mm Weight 10kg Scale2 Optimal water pressure - Small size and easy to install SCALA2 is a fully integrated booster pump that generates optimum water pressure in all taps simultaneously, even when several taps are opened at the same time and even when the shower is in use. It is equipped with pump, motor, tank, sensor, frequency converter and non-return valve; all in one compact unit. With intelligent pump control, SCALA2 automatically adapts performance based on suction pressure and water usage in the home. Thanks to the water-cooled motor, SCALA2 enjoys a very low noise level, similar to that of a modern dishwasher What is intelligent pump control? SCALA2 is equipped with a pre-installed sensor which constantly measures the delivery pressure. In the event that the pressure is lower than that requested, SCALA2 will intervene immediately to increase it. This is intelligent pump control; the result is optimal water pressure Advantages Optimum water pressure: The intelligent pump control adapts the pump operation automatically Low Noise: Noise is similar to a modern dishwasher (47 dB(A) during normal use) Simplified selection: One model for all domestic pressure boosting needs Easy installation: Small size, fully integrated solution, plug & pump Easy to set up: Intuitive dashboard Reliable operation: Dry-running and anti-cyclic protection Long life: High quality and low maintenance Applications SCALA2 is the right choice for residential buildings up to 3 floors and 8 taps. Pressure increase from the mains : Increases the pressure of the water supplied by the mains Tank Pressure Boost : Increases water pressure from rooftop tanks, intermediate tanks and ground tanks, including rainwater tanks. Pressure increase from wells : The maximum suction depth is 8 metres Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Single-stage self-priming Grundfos electric pump for clear water jp4-47 99458767 General characteristics Brand: Grundfos Supplied model: jp4-47 Supplied model number: 99458767 Data sheet Nominal flow rate: 4 m³/h Max warhead: 47m / 47m Primary mechanical seal: BBVP Approvals on nameplate: CE,EAC Curve tolerance: ISO9906:2012 3B Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller: Composite Material code: S Installation Ambient temperature limit: 0 .. 40 °C Max operating pressure: 6 bar Max suction pressure: 1 bar Pump suction: G1 Pump delivery : G1 Liquid Pumped liquid Water Liquid temperature range 0 .. 40 °C Liquid temperature during operation 20 °C Density 998.2 kg/m³ Electrical data Absorbed power - P1: 850 W rated power - P2: 0.56 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Rated Current: 3.8A Starting Current: 11.3A Rated Transmission Speed: 2800rpm Capacitor capacity - run: 12 µF/450 V Protection class (IEC 34-5): IP44 Insulation class (IEC 85:) F Cable plug type: SCHUKO Cable: Y Checks Presscontrol: Without presscontrol Switch: On/Off switch not included Description The electric pump has been designed for the supply of clear water and other moderately aggressive liquids; it is the ideal choice for use in private homes, country houses and gardens. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Single-stage self-priming Grundfos electric pump for clear water jp5-48 99458769 General characteristics Brand: Grundfos Supplied model: jp5-48 Supplied model number: 99458769 Data sheet Nominal flow rate: 5 m³/h Max warhead: 48.3m / 48.3m Primary mechanical seal: BBVP Approvals on nameplate: CE,EAC Curve tolerance: ISO9906:2012 3B Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller: Composite Material code: S Installation Ambient temperature limit: 0 .. 40 °C Max operating pressure: 6 bar Max suction pressure: 1 bar Pump suction: G1 Pump delivery : G1 Liquid Pumped liquid Water Liquid temperature range 0 .. 40 °C Liquid temperature during operation 20 °C Density 998.2 kg/m³ Electrical data Absorbed power - P1: 1490 W rated power - P2: 1,014 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Rated Current: 6.6A Starting Current: 27.9A Rated Transmission Speed: 2800rpm Capacitor capacity - run: 12 µF/450 V Protection class (IEC 34-5): IP44 Insulation class (IEC 85:) F Cable plug type: SCHUKO Cable: Y Checks Presscontrol: Without presscontrol Switch: On/Off switch not included Description The electric pump has been designed for the supply of clear water and other moderately aggressive liquids; it is the ideal choice for use in private homes, country houses and gardens. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical Features Model : UNILIFT CC 7 A1 Mouth size ; G 1 1/4 Power : 0.38 kW / 0.51 HP Intensity: 1.80 A Cable: 10m UNILIFT CC The Unilift CC pump is a single stage submersible drainage pump designed for pumping drainage water and grey waste water. The Unilift CC pump can take water up to a level of 3 mm above the floor, removing the filter. The Unilift CC pump is suitable for permanent and temporary installations. The Unilift CC pump is equipped with a flap check valve on the discharge port to prevent backflow from the pipework. An adapter ensures the correct connections to 3/4" or 1 1/4" discharge ports. The filter is made of stainless steel while the main parts of the pump, such as the body and housing, are made of molded composite materials. The Multibox B-CC7 is a Unilift CC pump combined with additional elements such as a hose with Storz coupling, adapter for threaded Storz coupling and a box with perforated mesh sides to be used as a pre-filter for the pump. It is the perfect solution to use as an emergency kit for single-family homes in the event of flooding. Applications The Unilift CC pump is designed for the following pumping applications: Water and rainwater in agriculture Water from rivers and lakes Rainwater and drainage Water for filling/emptying tanks, ponds, cans, etc. Effluents from showers, car washes and wells below the level of the sewer system Pool water Ditch drainage water Groundwater (lowering applications) Effluents from viaducts, underpasses, etc. Drainage water from splinker systems in garages. Features and Benefits Composite materials Stainless steel filter Automatic air vent valve on the handle Available with level switch Suitable for low suction levels Compact shape for easy movement and cleaning Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 12 months from the date of purchase

Read more less

Grundfos submersible single-impeller three-phase electric pump for sewage in stainless steel ap 50b.50.11.3 96004601 WITHOUT SHUKO PLUG General characteristics Brand: Grundfos Model: ap 50b.50.11.3 Code: 96004601 Data sheet Max flow rate: 8.06 l/s Max head: 14 m Impeller type: VORTEX Max. Particle: 50mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 1.75 kW Rated power - P2 : 1.31 kW Network frequency: 50Hz Rated Voltage: 3 x 400V Rated Current: 2.81A Cos phi - power factor: 0.90 Rated Drive Speed: 2785rpm Capacitor capacity - run: 16 µF/400 V Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: NONE Thermal protection: external Electric cable length: 5 m Cable plug type: NONE Other Net weight: 11.4kg Gross weight: 13.4kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Single-stage self-priming Grundfos electric pump for clear water jp4-54 99458768 General characteristics Brand: Grundfos Supplied model: jp4-54 Supplied model number: 99458768 Data sheet Nominal flow rate: 4 m³/h Max warhead: 50m / 50m Primary mechanical seal: BBVP Approvals on nameplate: CE,EAC Curve tolerance: ISO9906:2012 3B Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller: Composite Material code: S Installation Ambient temperature limit: 0 .. 40 °C Max operating pressure: 6 bar Max suction pressure: 1 bar Pump suction: G1 Pump delivery : G1 Liquid Pumped liquid Water Liquid temperature range 0 .. 40 °C Liquid temperature during operation 20 °C Density 998.2 kg/m³ Electrical data Absorbed power - P1: 1130 W rated power - P2: 0.746 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Rated Current: 5.1A Starting Current: 17.8A Rated Transmission Speed: 2800rpm Capacitor capacity - run: 12 µF/450 V Protection class (IEC 34-5): IP44 Insulation class (IEC 85:) F Cable plug type: SCHUKO Cable: Y Checks Presscontrol: Without presscontrol Switch: On/Off switch not included Description The electric pump has been designed for the supply of clear water and other moderately aggressive liquids; it is the ideal choice for use in private homes, country houses and gardens. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less