Circulator Pump for domestic pressure increase GRUNDFOS mod. UPA 15-120 with pressure switch for automatic start Liquid: Pumped liquid: water Liquid temperature range: 2 .. 95 ° C Liquid temperature during operation: 60°C Density: 983.2kg/m³ Technician: TF class: 95 Approvals on nameplate: CE, WEEE materials: Pump body: cast iron Impeller: PP Composit Installation: Maximum working pressure: 10 bar Pipe connection: 1 Door to door length: 200mm Electrical data: Max. power consumption: 200W Network frequency: 50Hz Rated Voltage: 1 x 230V Current in speed 3: 0.89A Capacitor size - stroke: 6 μF Protection class (IEC 34-5): X2D Insulation class (IEC 85): F Others: Gross weight: 5.3kg Shipping volume: 0.006 m³ UPA The UPA pump is designed for increasing the pressure of domestic water in residential houses. The pump can be used to increase pressure in showers, faucets and other domestic water outlets. The UPA can be used in open systems and can also be connected directly to the main water pipe. A flow switch starts and stops the pump when the water outlet is opened or closed. The pump is supplied with a cable and a Schuko socket, but without unions or counterflanges Domestic applications requiring high pressure in faucets, showers, gas boiler outlets and other household tapping points: Tank amplification on the roof Instant boiler (without tank) Domestic rise with inlet pressure Suitable for hot and cold water applications. Temperatures up to 95°C. Capable of raising water in several outlets at a time (1-4 taps) making it suitable for apartments with a shared water supply and for single family homes: Urban areas with low water pressure at maximum demand Apartments sharing low pressure water supply Rural areas with low water pressure Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Model : SCALA2 Maximum ambient temperature 55°C Nominal flow rate : 3 m 3 /h Adjustable constant pressure: min 1.5 bar / max 5.5 * bar Maximum inlet pressure: 6 bar - (*) 1.5 bar required to reach 5.5 bar Supply voltage: 1 x 220-240V, 50/60Hz Noise level: <47dB (A) (indoor installation) Maximum liquid temperature 45°C Maximum system pressure 10 bar IP class X4D (outdoor installation) Max. 3 floors Taps Max. 8 Dimensions Height: 302mm Length: 403mm Width: 193mm Weight 10kg Scale2 Optimal water pressure - Small size and easy to install SCALA2 is a fully integrated booster pump that generates optimum water pressure in all taps simultaneously, even when several taps are opened at the same time and even when the shower is in use. It is equipped with pump, motor, tank, sensor, frequency converter and non-return valve; all in one compact unit. With intelligent pump control, SCALA2 automatically adapts performance based on suction pressure and water usage in the home. Thanks to the water-cooled motor, SCALA2 enjoys a very low noise level, similar to that of a modern dishwasher What is intelligent pump control? SCALA2 is equipped with a pre-installed sensor which constantly measures the delivery pressure. In the event that the pressure is lower than that requested, SCALA2 will intervene immediately to increase it. This is intelligent pump control; the result is optimal water pressure Advantages Optimum water pressure: The intelligent pump control adapts the pump operation automatically Low Noise: Noise is similar to a modern dishwasher (47 dB(A) during normal use) Simplified selection: One model for all domestic pressure boosting needs Easy installation: Small size, fully integrated solution, plug & pump Easy to set up: Intuitive dashboard Reliable operation: Dry-running and anti-cyclic protection Long life: High quality and low maintenance Applications SCALA2 is the right choice for residential buildings up to 3 floors and 8 taps. Pressure increase from the mains : Increases the pressure of the water supplied by the mains Tank Pressure Boost : Increases water pressure from rooftop tanks, intermediate tanks and ground tanks, including rainwater tanks. Pressure increase from wells : The maximum suction depth is 8 metres Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Self-priming Grundfos electric pump with intelligent control that compensates for pressure losses Scala2 98562862 General characteristics Brand: Grundfos Model: Scala2 Code: 98562862 Data sheet Flow rate: 3 m³/h Head: 27 m Max warhead: 45m / 45m Primary mechanical seal: CARBON/CERAMIC Approvals: CE, VDE, MORO, UKCA, KC, AAA Potable Water Approvals: WRAS,ACS Curve tolerance: ISO9906:2012 3B Model: A Material Pump body: Composite Pump: NORYL FE1630PW PPE+PS-GS30 Impeller: Composite, NORYL FE1630PW PPE+PS-GS30 Material code: A Installation Ambient temperature limit: 0 .. 55 °C Max operating pressure: 10 bar Max suction pressure: 6 bar Input connection type: R Send type: R Input connection size: 1 inch Size of the outlet connection: 1 inch Nominal pressure of the connection: PN 10 Liquid Pumped liquid: Water Liquid temperature range: 0 .. 45 °C Liquid temperature during operation: 20°C Density: 998.2 kg/m³ Electrical data Absorbed power - P1: 550 W Rated power - P2: 0.45 kW Network frequency: 50 / 60Hz Rated Voltage: 1 x 200-240V Rated Current: 2.8A Protection class (IEC 34-5): IPX4D Insulation class (IEC 85): F Cable length: 2m Socket: Type E/F (CEE7/7) Power plug: Schuko Other Net weight: 9.5kg Gross weight: 12.2kg Packing volume: 0.043 m³ Storage temperature range: -40 .. 70 °C Description Useful to: Pressure Boost - Commercial Buildings Collection of groundwater for domestic use Increased water pressure for domestic use Grundfos SCALA2 is a compact, self-priming and fully integrated water system for pressure boosting in domestic applications, such as detached and detached houses and flats. SCALA2 incorporates integrated speed control which allows you to maintain perfect pressure in the taps. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

GRUNDFOS GRINDER LIFTING STATION model: SOLOLIFT2 CWC-3 for waste water Suitable for pumping waste water from: 1 x toilet, wall mounted Optional health devices, e.g.: -1 x washbasin -1 x shower cubicle -1 x bidet or urinal Drain connection: -∅22/25/28/32/36/40 Load Fitting: -1 x ∅32/36/40 on the upper side -2 x ∅36/40/50 on the left and right sides of the tank SOLOLIFT 2 THE NEW GENERATION OF SHREDDERS AND HOME LIFTING STATIONS SOLOLIFT2 is an exclusive range of compact lifting stations which allows the drainage of any domestic sanitary device where required, independent of the gravity drainage system system. The units collect and pump the waste water via a thin pipe (> 23mm) to the next downpipe - height up to 6m or 100m away. With SOLOLIFT2 an extra toilet or full bathroom in the attic or basement will no longer be just a wish. The range includes 5 variants of compact lifting stations for the disposal of domestic wastewater. 3 units called WC-1, WC-3 and CWC-3 have been designed to take waste water from a toilet and other sanitary fixtures. Two units called C-2 and D-2 were designed to remove (hot) waste water from a toilet, shower, washbasin, sink, washing machine and dishwasher. SOLOFIT2 has been designed according to the needs of professionals according to characteristics of high reliability and easy and clean maintenance. The units are plugged in, ready for use and their operation is fully automatic from the moment water enters the tank . The Grundfos SOLOLIFT2 range of lifting stations offer the most reliable wastewater management for any combination of toilet, bidet, sink, shower and washing machine regardless of the placement of the sanitary fixture within a building. Get flexibility, adaptability and improved performance with SOLOLIFT2. Due to its independence from the main sewer, SOLOLIFT2 only needs a simple 20mm delivery pipe, making it ideal for modern life. With its unique features, such as the integrated float switch unit with two start level options*, it is possible to control the volume adjustment according to the connected sanitary device, without the need for additional accessories. Simply choose a low start level for slimline contemporary shower trays, or increase pump volume for scrubbing or tub draining applications. SOLOLIFT2 CWC-3 The CWC-3 is a small and compact automatic lifting station, suitable for pumping domestic wastewater from residential areas, where evacuation by gravity is not possible. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Flow rate up to: 5 m 3 /h Head up to: 50 m high Power supply : Single-phase Voltage : 1 x 230V Power : 1.4 kW / 1.81 HP Maximum Working Pressure: 6 Bar Maximum Suction Height: 7 metres Pumped Liquid Temperature : from -10°C to +40°C Protection : IP44 ( Pump ) , IP65 ( PM1 and PM2 control ) Pumped Liquids: Clean, non-aggressive liquids free from solid particles and fibres Pump suction : G1 Pump Delivery : G1 Materials Composition Pump Pump body, intermediate chamber, impeller and shaft: Stainless steel Painting and electrocataphoresis treatment make the engine resistant to corrosion Grundfos The JP pump is a single stage self-priming centrifugal pump with axial inlet port and radial discharge port. The pump features a built-in ejector with guide vanes for optimum self-priming properties. Built for a long, trouble-free working life, the compact and convenient Grundfos JP pump is suitable for a wide range of water supplies and tasks around the home, garden and leisure, as well as agriculture, horticulture and to small service companies. When used in conjunction with a pressure control or reservoir the JP pump is ideal for water supply systems. Features and Benefits Self priming Stable operation even in the presence of air in the liquid Robust design which makes the pump also suitable for fixed installation The pump is directly coupled to a special fan-cooled asynchronous motor adapted to the pump performance Single-stage motors have a built-in thermal switch and require no additional motor protection Three-stage motors require external motor protection. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Technical features Flow rate up to: 3.5 m 3 /h Head up to : 42 m high Power supply : Single-phase Voltage : 1 x 230V Power : 0.85 kW / 1.03HP Maximum Working Pressure: 6 Bar Maximum Suction Height: 7 metres Pumped Liquid Temperature : from -10°C to +40°C Protection : IP44 ( Pump ) , IP65 ( PM1 and PM2 control ) Pumped Liquids: Clean, non-aggressive liquids free from solid particles and fibres Materials Composition Pump Pump body, intermediate chamber, impeller and shaft: Stainless steel Painting and electrocataphoresis treatment make the engine resistant to corrosion Grundfos The JP pump is a single stage self-priming centrifugal pump with axial inlet port and radial discharge port. The pump features a built-in ejector with guide vanes for optimum self-priming properties. Built for a long, trouble-free working life, the compact and convenient Grundfos JP pump is suitable for a wide range of water supplies and tasks around the home, garden and leisure, as well as agriculture, horticulture and to small service companies. When used in conjunction with a pressure control or reservoir the JP pump is ideal for water supply systems. Features and Benefits Self priming Stable operation even in the presence of air in the liquid Robust design which makes the pump also suitable for fixed installation The pump is directly coupled to a special fan-cooled asynchronous motor adapted to the pump performance Single-stage motors have a built-in thermal switch and require no additional motor protection Three-stage motors require external motor protection. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less