NB: PRODUCT ARRIVES IN MID-FEBRUARY ARISTON EGIS PREMIUM EVO EXT 25 EU CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW ErP Technical features Product code: 3300763 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 23.5/2.5 Max/min heating thermal power (80°C-60°C) kW 22.9/5.3 Efficiency at nominal heat input (60/80°C) % 97.5 Efficiency at nominal heat input (30/50°C) % 103.9 Efficiency at 30% at 30°C % 108.2 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 25/45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 10.5 Quantity of hot water ∆T=25°C litres/min 13.1 Quantity of hot water ∆T=35°C litres/min 9.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 87 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/505/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Standard: Sensys system manager with integrated time programming General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Egis Premium Evo EXT EGIS Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). Simplicity and with reduced consumption thanks to the 1:4 modulation ratio and the high-efficiency circulator with continuous modulation. Operation only with methane gas Characteristics: Wall mounted condensing boiler for outdoors with auto function Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Modulation ratio 1:4 Electro-galvanized casing for outdoors Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Anti-freeze, anti-limescale and anti-blocking circulator protection Aluminum isothermal primary exchanger Cold water inlet and heating return filters 60mm split exhaust Operation only with methane gas Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA3 AVANT+ 240 Fi METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT -ErP IN CASE OF UNAVAILABILITY OF THE ITEM, THE NEW LOW NOX AVANT BLUE MODEL WILL BE SHIPPED ______________________________________________________ Technical features ErP energy efficiency class (heating and DHW): A - B Load profile: XL Heating/DHW nominal heat input kW 24.8 Heating/DHW nominal heat output kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 96.8% Efficiency at 100% Pn (50-30°C): 101.6% Minimum operating temperature °C -5 Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-65 Sanitary water production ∆T 25°C l/min 13.7 Minimum domestic water flow rate I/min 2 Degree of protection: IPX5D Electric power W 122 Dimensions (hxwxd): 763x450x345 mm ; 43.5 kgs Power supply: METHANE ____________________________________________________________________ Luna3 Avant+ Wall mounted condensing boiler ideal for replacement in high temperature systems Baxi introduces the new Luna3 Avant+ 240 Fi condensing boiler which re-proposes the best characteristics of the Luna3 range of conventional boilers (sanitary performance, reliability and installation versatility) combined with the advantages and performance of a condensing boiler. Luna3 Avant+, in fact, is equipped with an aluminum alloy condensing post-exchanger (recovery) which recovers the latent heat of condensation, which in traditional boilers is instead dispersed with the exhaust gases. The exchanger-recovery, positioned inside the boiler at the top right, is directly connected to the fan which pushes the fumes inside, where they condense in contact with the system return water, before being expelled. Characteristics: High efficiency circulation pump Arrangement for combination with the Baxi integrated solar system Same settings as a traditional boiler (the analyzer is not necessary to adjust the gas valve) Operation on methane (possibility of operation on LPG with conversion kit) Control panel with multifunction LCD display STANDARD climate control (with optional external probe) Aluminum alloy condensing post-exchanger _________________________________________________________________ Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

NB: BOILER CANNOT BE INSTALLED IN PIEDMONT AND LOMBARDY DUE TO CURRENT REGULATIONS. Hermann Saunier Duval Gas Condensing Boiler Model THEMIS CONDENS 24 kW Methane Complete with Fume Exhaust Kit + FREE DIRT SEPARATOR Technical features ErP efficiency class in heating/DHW: B/A Sanitary load profile: XL Type: Heating and domestic hot water Heating Nominal power P min/max heating 80/60°C: 12.2/24.1 kW Partial load efficiency 30% 40/30 °C %: 99.7 Sanitary Min/Max Rated Power (60°C): 12.5/24.0 kW Specific flow rate (∆T=25 K): l/min 13.8 Electrical characteristics Max power consumption: W 60 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 720 x 405 x 330 mm METHANE version THEMIS CONDENS Themis Condens is the ideal condensing solution for replacing traditional wall-mounted boilers that work with high temperature radiators in apartments. The boiler has all the characteristics of simplicity in both installation and management. Themis Condens was developed to give the right comfort, both for the production of domestic hot water and to provide the ideal climate in the rooms. Specially designed for replacement in high temperature systems Small size Simplicity of management Reduced electricity consumption thanks to the instantaneous high efficiency pump Themis Condens combines the simplicity of the traditional boiler with the efficiency of condensing boilers. Themis Condens runs on methane and can be converted to run on propane. Themis Condens is available in the power of: 24kW for heating and 24kW for domestic hot water production. 27kW for heating and 27kW for domestic hot water production Characteristics: Can be installed indoors. Continuous domestic hot water (DHW) production up to 16 l/min Small dimensions: 72cm high, 40 wide and 33 deep (24 kW) The boiler features a new high-efficiency pump with high performance and a 7-litre expansion vessel. ErP efficiency class B in heating, A in DHW with XL profile. Reliability and Hermann Saunier Duval standard quality Specific for high temperature systems Large passages in the primary exchanger Reduced electricity consumption thanks to the high efficiency pump Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview SAVIO evoDENS HE 30S* CONDENSING BOILER COMPLETE WITH KIT FOR LPG LPG FUMES EXHAUST - NEW ErP Technical specifications Model:ÿevoDENS HE Product codeÿLPG: 103041010000 Product codeÿLPG: 103141009000 Technical features: Heating/sanitary nominal heat inputkWÿ25.0 / 30.0 Yield name 60ø/80øC * %ÿ97.0 Yield min. 60ø/80øC * %ÿ93.6 NOx class no. 6 Minimum / maximum heating temperature****øC 25 / 80 Minimum / maximum heating pressurebar 3.0 / 0.3 Capacity of the expansion vessel (total / useful) l 7.0 / 3.5 Maximum flow rate (T=25 K) / (T=35 K) l/minÿ16.7 / 11.9 Specific sanitary flow rate (T=30 K) ***** l/minÿ13.9 Voltage / Power at nominal heat input V~/ W 230/100 Power at rest (stand-by) W 5 Degrees of protection nø IPX5D Dimensions HxWxDÿmm 700x400x290; 32.7Kg Boiler water content l 2 Main features EvoDENS HE The new range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger Evodens HEÿis the new SAVIO range ofÿwall-mounted condensing boilersÿ: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in versions for heating and domestic hot water production and for heating onlyÿEvodens HEÿpresents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290 mm).ÿ Evodens HEÿhas the strong point in the innovative heat exchanger designed to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire SAVIO condensing range, ÿEvodens HEÿallows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. MAIN FEATURES: High yields (in compliance with yield directive 92/42ÿCEE and Legislative Decree 311/06) Sanitary comfort( EN 13203) Primary condensing exchanger in stainless steelÿwith aluminum linings to offer maximumÿresistance to corrosion Total premix burner, built in stainless steel (Class NOx 5) Modulation 1:10 Methane also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tanks High efficiency PWM pump with low power consumption variable speed Maximum power adjustable according to the system Degrees of protection IPX5D Can be installed in a partially protected place Integration with Savio solar systems, using a solar kit Innovative digital control panel Digital pressure reading Arrangement for remote control of external probe Possibility of managing a zone valve by means of a remote control in the case of multi-zone systems. High circulation single coil primary exchangerÿSavi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with less loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in the case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. CONTROL PANEL Summer/winter/off selector Heating temperature regulator Sanitary temperature regulator Digital pressure reading Domestic hot water and heating temperature visualization from the display Display of fault diagnostics, fault history block status Refill ViewÿRecommended Refill Guide Display of months remaining until annual maintenance is due External temperature displayÿ(with external probe connected) andÿindication of external probeÿconnected and K value set Flame modulation display Visualization of SavioÿSOLCONTROL solar control unit connected to EVODENSÿHE, active solar pump and solar integration DHW comfort functionÿselectable by means of a dedicated keyÿand programmable Ingressdirectl the INFO menu dedicated to the user. Thermoregulation By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. EVODENS HE will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency also rises, giving greater value to your home. Ecodesign directive: from 2015 on new condensing boilers In fact, after very long negotiations, the ÿEcodesign regulationÿ was approved, which introduces a new energy labeling on minimum efficiency standards for boilers.ÿIn particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for appliances for the production of domestic hot water. ÿHence the obligation to installÿonly condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimneyÿas occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve a yield of 106% with 92% of the traditional boiler and 84/85% of an oldÿÿtraditional generator.ÿThe installation obligation concerns manufacturers of boilers which will no longer be able to place on the market non-condensing starting from 26 September 2015. This means that starting from this date, anyone who wants to install a boiler in their own home will have to install only condensing models. Only one particular type of non-condensing boiler will continue to be produced which is technically called open room? to be installedÿ when it is not possible to replace an old boiler with a condensing boilerÿdue to problems related to the collective flueÿof some multi-family buildings. Products for heating water and the environment represent around 30% of the world's energy consumption in Europe.ÿ Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations like Italy were deactivated. As of 26 September 2015, the ErP regulation and ÿenergy labelingÿwill be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks) u. How to read energy labels There are different labels, based on the type and function of the product (only room water heating of both, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Shipping From the day payment is received, the product will be shipped within 3 working days. Free insured shipping for Italy. Shipping will take place via one of the national carriers

Read more less

Condensing boiler Riello Residence Condens 25 KIS Gpl complete with flue kit cod. 20097541 Technical specifications Product code:20097541 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 25 kW Useful thermal power (sanitary): 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 105% Profit return 30% (47th return): 110% Sealed chamber, forced draught Quantity of hot water at ?t 25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 845 x 400 x 358 ; 39 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Overview RINNAI CONDENSING BOILER AMAMI 24 LPG COMPLETE WITH FUME KIT: Combined premixed gas condensing boilers. Technical specifications Model: Love Me 24 Code: A203C Nominal heating heat input: 16.5 kW Sanitary nominal heat input: 24 kW Energy efficiency marking 92/42 EEC:ÿ **** Efficiency at full loadÿ(80ø/60ø):ÿ98.2% Return profit to partial loadÿ30%: 109.7% Sealed chamber, forced drafts Nominal power modulation:ÿ(Tm/Tr=80/60øC) Heating kW4.4 16.2 Nominal power modulation:ÿ(Tm/Tr=36/30øC) Heating kW 4.9 - 17.6 Pollution class marking:ÿNox EN 483 5 G20 gas consumption at 1.013 mbar and 15øC:ÿ(Sanitary) mü/h 1.75 (2.54) Maximum absorbed electrical power: 114ÿWÿ Electric power absorbed at partial load: 86 W Heating/sanitary water content: 3.3/0.5 l Expansion tank content: 8 lt DHW delivery (T=38øC): 8.6 l/min Maximum working temperature: 85øC DHW delivery (T=25øC): 13.1 l/min Dimensions (hxlxp) mm 650 x 500 x 395 ; 37Kg Electrical Protection Degrees:ÿIPX4D Power supply: LPG Features list CONDENSATION the environmentally friendly and energy saving technology.ÿCondensing boilers are clean and efficient: even the water vapor contained in the combustion products is used to generate heat. By making the most of the condensate, the energy to produce the desired heat is less, with the advantage of saving energy. In fact, condensing boilers reduce consumption by a final 30% and polluting emissions (NOx and CO2) by a final 70%, respecting the 'traditional' ones. LOVE ME Love me Oshima a Japanese tropical island: the new collection of condensing boilersÿRinnai is inspired by her. Love me because I'm perfect. It heats your home and, while doing so, it respects the environment with the lowest polluting emissions. And let us save money, ensuring a constant return for my entire life. Love me because I am at the forefront of technology, designed to be truly capable of improving your daily comfort. Love me because I will be able to surprise you, with all the domestic hot water you need. Instant type condensing gas heat generator for heating and domestic hot water production, complete with electronic display with regulation and self-diagnosis function, which can be combined with a digital remote control. LOVE ME: A stainless steel heartÿThe heartÿ of allÿRinnai boilers, the heat exchanger, in stainless steel. This, in combination with the inverted flame ceramic burner, guarantees the highest efficiency of all the boilers on the market (109.9% according to EN 677). All Rinnai Amami shima appliances have advanced electronics and the ability to modulate from very low powers such as to guarantee a constant operating curve, avoiding overheating and cooling of the premises. The production of DHW, in all models, is abundant and immediate, to safeguard comfort and save energy. The structure of Rinnai boilers is sound-absorbing, designed to minimize the sound impact on the house: measured in decibels, the noise produced by the boiler is the same as you can hear in a library. Energy classification: 4 STARS /4 ACS Rating: 3 STARS /3 Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX ZEUS SUPERIOR 26 KW LPG CONDENSING BOILER WITH BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Healthcare services: Useful thermal power for hot water production (kcal/h) 25.8 (22188) kW; DHW temperature °C 20 - 60: Sanitary pressure 2.5 bar: Withdrawal in continuous service (∆t 30°C) litres/min 13.1; Specific flow rate x 10 min. (∆t 30°C) litres/min 16.0; Boiler losses kW 0.174; Nominal expansion vessel capacity liters 2.0 (1.2) Power supply: LPG. Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 23.9 kW; DHW power: 25.8 kW; Hot water production (∆t 30 °C) l/min: 16.0 Nominal Current: 0.64A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 10.0/7.1 L; Head available with flow rate 1000 l/h kPa (m wc) 26 (2.65); Benefits and functions: Display: backlit liquid crystal, provides the main operating information; It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings and whirlpool tubs, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 54-litre boiler made of stainless steel to be unalterable over time with minimal heat loss so as to resist even outdoors. The wide flange optimizes cleaning and maintenance operations, which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. Inside the boiler, in turn, there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 900x600x460cm; Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX TERA 28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Product code: 3.027369 Energy label specifications according to the European ErP directive Heating energy efficiency Class Sanitary Energy Efficiency Class Withdrawal profile: XL Characteristics of heating/DHW operation: Maximum nominal heat input in DHW kW 32.6 Maximum nominal heat input in heating kW 28.6 Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) % 97.9 Specific flow rate in continuous domestic hot water service (∆t 30 °C) l/min 15.3 Nominal heating expansion vessel capacity (total) liters 10 (6.4) Electrical protection degree IP X5D Boiler weight full of water (empty) kg 37.9 (35.5) VICTRIX TERA Everything you need, immediately and in a small space It is the new line that strengthens the Immergas range with boilers dedicated to those looking for quality and simplicity. All the appliances are condensing and above all with total premixing to save gas efficiently. The dimensions are compact and the easy placement allows flexibility to adapt to new installations or to replace existing appliances in the home, outdoors in protected places, recessed with OMNI CONTAINER. There are two instantaneous versions - 24 and 28 kW - and one for heating only of 24 kW which can be combined with boilers of various capacities. The whole range that you find on CaldaieMurali.it is equipped with a condensing module with stainless steel coil and designed to comply with the new European Directives on the use of energy. VICTRIX TERA boilers fall into class 6, the most ecological in the European classification, for low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). All versions can discharge the fumes on the wall in the cases envisaged by DL 102 of 4 July 2014. The controls are simple, the LCD display is clear and the selection buttons for adjustments and settings are activated quickly. Features and strengths: Low consumption: the low consumption circulator allows for considerable savings in electricity. Standard: the cover of the water connections improves the aesthetics in domestic environments. Comfort Ease of use: practical buttons and a backlit display allow you to easily manage and view the boiler setting. DOMINUS App: simple and intuitive, it allows you to check the functioning and temperature of the boiler, turn it on and off from anywhere via smartphone or tablet. Options. Environmental compatibility Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 6 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FERROLI BLUEHELIX PRO S 32C KW GAS CONDENSING BOILER WITH METHANE OR LPG COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Heating ERP class: A Healthcare ERP class: A Load profile: XL Heating capacity (PCI) Min / Max Heating 6.7/29.2/32 kW Heating power 80°C-60°C Min / Max Heating6.6/28.9/32 kW Useful thermal efficiency 80°C-60°C Pmax % / Pmin % 98.8/97.8 Useful thermal efficiency 30% load: 108.8% Domestic hot water production Δt 30°C/Δt 25°C: 15.3/18.3 l/min Heating working pressure Max / Min bar 3 / 0.8 Empty weight kg 31.5 Dimensions (HxWxD): 700x420x320 mm Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre BLUEHELIX PRO S SMALL FOOTPRINT, GREAT PERFORMANCE ... FULL CONDENSATION BLUEHELIX PRO S has been designed to guarantee maximum energy efficiency and performance both in heating and in the supply of domestic hot water thanks to the new bivalent exchanger in Aisi 316 Ti stainless steel. This new exchanger integrates the heating circuit and the production of instantaneous domestic hot water in a single element, thus optimizing the phenomenon of condensation. The galvanized sheet casing, supplied separately from the boiler body, has been designed to facilitate access to the hydraulic connections and to allow the smoke ducts and air intake pipes to exit on each side of the same. Bluehelix Pro S achieves one of the highest energy efficiency of space heating in its category: ηs 94%. Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+. Strengths: It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% A+ SYSTEM: in combination with the Romeo modulating remote timer control and the external probe Primary exchanger in thick Aisi 316 Ti stainless steel with integrated sanitary production (dual stainless steel exchanger) Total premix burner in stainless steel Digital control panel Electronic flame modulation both in heating and DHW Can be combined with the modulating remote timer control Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Advantages: Exchanger with "SELF-CLEANING" function which reduces limescale deposits inside the DHW circuit High yields both in heating and in sanitary production Ease of access to internal components for any maintenance ECO function in DHW for greater savings in the period of low use of hot water 3-star certified comfort in sanitary production according to EN 13203, amended by Reg. 812/2013 Sliding temperature operation via optional external probe Low consumption modulating heating pump (Erp Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. Functions: ECO-COMFORT function In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function BLUEHELIX PRO S has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from 1 August 2015 are equipped with a low-consumption circulator, otherwise defined as "class A". It is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, i.e. by analyzing the impact of the low-consumption circulator integrated in the boiler, it reduces up to 30% of the total electricity consumption of the generator. max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure max speed high efficiency circulator: 19 € Therefore, with the replacement of standard boilers with Bluehelix Pro S, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. .

Read more less

Technical features Product code: 3310401  Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Heating maximum thermal power (DHW): 30.2 (33.7) kW Max/min heating rated heat output (Hi) Q: 31/7.0 kW Efficiency at nominal heat input: 97.6% Efficiency at 30% of nominal heat input: 107.9% EN13203 sanitary comfort performance stars: *** Energy efficiency stars: (dir 92/42/CEE) **** Expansion vessel capacity: 8 l Maximum water capacity of the system: 100/300 litres Port. specific in healthcare (10 min. with ΔT= 30°C): 16 l/min Hot water flow rate at ∆T 25º C: 19.3 l/min Extremely compact dimensions hxwxd: 745 x 400 x 375 mm; 35kg LPG power supply To view more product information CLICK HERE General characteristics PIGMA GREEN Ebus2 EU The ideal condensing range for replacement with the aim of improving efficiency. The energy savings of condensing technology and the best sanitary comfort solutions, all concentrated in just 40 cm of intelligence. A complete range of accessories facilitates installation and use in advanced systems thanks also to the simplicity of integration with solar thermal systems. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate from 14.5 to 19.3 l/min with ΔT = 25ºC. Controlled DHW production managed by two probes and a sanitary flowmeter for better temperature stability based on the type of withdrawal. Programmable comfort function. Heating comfort Efficiency up to 109% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 20% to 100% of maximum power. SRA function, automatic boiler regulation system according to heating requirements. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Differentiated climatic thermoregulation of 2 circuits, according to the ambient and/or external temperature. Arrangement for integration into a heating system via the new Ebus 2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Backlit LCD display with display: history, self-diagnosis, operating temperatures. Comfort of use and installation Compatible with Expert Control: intuitive system manager for the management of 3 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. New intuitive electrical connections. Easier starting: automatic purge function and directly accessible combustion regulation. Can be installed in partially covered places. Energy saving and respect for the environment Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. 40% reduction in CO 2 emissions **. All ready for Energy Labeling What is it about? From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive ( ErP known as « Energy Related Products ») imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product you wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. Is it about me too? YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015 , the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its devices or systems with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices; technical data sheet of the system with the parts relating to the product or system already completed. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device and/or system to the public. Therefore even professionals such as plumbers, installers or planners can fall into this category. Everyone is required to ensure that: all appliances and/or systems have their respective labels and make sure that they are clearly visible; all devices and/or systems are always accompanied by the mandatory technical data sheets; any type of advertising, promotional or technical material showing energy data or price indications contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP) : The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of device, there are different labels. Those with efficiency classes A, A+ and A++ certify the products with the highest performance. Furthermore, two different classifications are envisaged for domestic heating and for the hot water production service, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the final customer can make his choice in the most informed way possible. SYSTEM LABEL In addition to the product label, the system label is also provided if a series of matched appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label in order to inform the end user in the best possible way. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NEW EXCLUSIVE EXCLUSIVE, A NEW STORY BEGINS. Through the innovative ACC electronic injection combustion, HYBRID READY integration and the new project design, EXCLUSIVE offers exclusive advantages in every installation variation. From the new EXCLUSIVE, A NEW STORY BEGINS. construction, redevelopment; from hybrid application in a multi-energy system to simple single installation, EXCLUSIVE represents the current and winning choice for those who are not satisfied and want to look beyond.   Characteristics: Electronic injection combustion via ACC system EXCLUSIVE plus only the BeSMART Wi-Fi Comfort Control (optional) forms a class A+ system 94% (ETAs) of energy efficiency in heating Universal installation : Indoor, outdoor and recessed installation. IPX5D electrical protection degree Tempozero installation: Removing the casing NO longer necessary for electrical connections and calibration Low consumption modulating circulator (EEI≤ 0.20) 6 m head, electronically modifiable up to 7 m Hydraulic connections and external probe available as options Frost protection down to -5 °C as standard HYBRID READY boiler , Can be integrated via BUS in a multi-energy system to make boiler operation more effective in relation to other energy sources (can be combined with a Beretta hybrid system using the REC 10H interface available as an accessory) Talking display: User interface for direct communication using TEXT and ICONS Self-adapting: The boiler automatically adapts to different types of gas and installation - ZERO calibrations CO alarm Boiler CO level constantly monitored and calibrated for maximum safety Small size: Thanks to its compactness, EXCLUSIVE can also be easily installed in a wall unit LPG version selectable from parameter Gas transformation kit not necessary Europe strategy With the opening towards the management of multi-energy plants, the reduction of emissions and the optimization of consumption, Beretta signs with EXCLUSIVE the highest contribution in terms of respect for the environment, in view of the 20-20-20 objectives of the Union countries expected by 2020, reconfirming their commitment to an increasingly eco-sustainable future.        Exclusive: a milestone in the evolution of Beretta Combustion and electronics, i.e. the heart and brain of EXCLUSIVE, entirely designed in the Research and Development Laboratories of the historic Lecco headquarters, mark a turning point in Beretta's mural evolution and are the result of the spirit of innovation that has distinguished the brand since its origins. With EXCLUSIVE, the novelty of the project fits perfectly into the tradition of know-how and takes on a linear design, which reworks some aesthetic lines of the first boiler models in a modern key, in perfect continuity of style. Continuity that is also manifested in the re-proposition of the EXCLUSIVE name, which has always characterized the top of the Beretta range, with exclusive features and advantages. Class A+ system using only the BeSMART WiFi Comfort Control (optional) .   "talking" interface The control panel is one of the distinctive elements of EXCLUSIVE which confirms its innovative profile. In fact, there are many EXCLUSIVE functions, all to be discovered, through a modern 3.5” backlit LCD display, which communicates with the user through texts and icons. By means of the intuitive silk-screened operating keys it is also possible to access the settings and parameterizations of the boiler and the system. GREEN GEM OF EXCLUSIVE: LED light bar that signals the current operating status of the boiler, reflecting on the casing even with the door closed.   Exclusive Features: HOURLY PROGRAMMING : Programmable heating by hour and by single zone INTELLIGENT SYSTEM FILLING Autonomous filling activation and total safety SYSTEM PRESSURE Displayed DATE AND TIME Display as screensaver PREHEATING Domestic hot water preheating activation SCHEDULED MAINTENANCE Intelligent system that warns the user when boiler maintenance is due   Everywhere Exclusive: Thanks to BeSMART, Beretta's WiFi Comfort Control, controlling and managing home comfort is now possible wherever you are, through a simple and intuitive App, via smartphone and tablet. EXCLUSIVE is compatible with all BeSMART functions, even the most advanced. From home heating professionals, easy management of home comfort. Even away from home   Electronic injection combustion The ACC system, designed and developed by Beretta, allows in all circumstances to offer "first class" functionality, efficiency and low emissions. Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the entire modulation range of the delivered power. Thanks to the ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. [A] Cylindrical burner in stainless steel [B] Integrated electronic card [C] Traditional ga valve with modulator [D] Modulating fan with Hall effect     Hybrid Ready EXCLUSIVE is a HYBRID READY solution. The boiler was born as a fundamental element of the offer of HYBRID READY products, which constitute the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE, AS A HYBRID READY SOLUTION, IS THE IDEAL CHOICE FOR THOSE WHO WANT TO LOOK AHEAD AND INVEST IN A PRODUCT WHICH WILL MAINTAIN ITS ITS VALUE UNCHANGED OVER TIME. Thanks to the new communication BUS with which it is equipped, EXCLUSIVE is able to interact perfectly with the Energy Manager REC 10H, a real thinking brain that constantly monitors the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta hybrid, distinguishing itself for its modular approach to the world of multi-energies, is therefore able to offer increasingly tailored comfort and to evolve over time, with the inclusion of new components that increase efficiency   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA DUO-TEC+ 33 GA METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Sanitary nominal heat input: 34 kW Nominal heat input Heating: 28.9 kW Reduced thermal input: 4.8 kW Sanitary thermal power: 33 kW Nominal thermal power Pnominal: 28 kW Useful efficiency at 30% thermal power. name and low temp. regime: 98.1% Useful efficiency (pci) at 30% - return temperature 30°C: 108.9% Minimum operating temperature: -5°C Expansion vessel capacity: 10 l Max heating operating pressure: 3 bar Degree of protection (IEC 60529): IP X5D Rated Electric Power: 106W NOx degree: 6 Dimensions (hxlxp): 763x450x345; 38.5kg Luna Duo-tec E and Duo-tec Compact E: the already well-known Baxi boilers present themselves today with a new aesthetic, increasingly modern and attentive to new design trends, which allows them to be inserted in any living context. The control panel has also been completely renewed and is equipped with a new backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys. The new boilers, even more beautiful and modern thanks to the restyling, however keep intact the characteristics that have always distinguished the Duo-tec range: Reliability: robustness, durability and reliable performance; Efficiency and savings: the reduction of on/off cycles translates into considerable benefits in terms of energy savings and lower emissions; Completeness of the range: heating only models, with instant DHW production, and also the compact version with the possibility of outdoor installation. Wide modulation range 1:7 Greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions Adjustment of the thermal power produced to the dissipated power thus avoiding excessive overheating/cooling of the premises. Digital control panel The Duo-tec E range of boilers is equipped with a new digital control panel with backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way. By pressing the dedicated key, it is possible to view numerous information regarding boiler operation, such as: heating system water pressure (electronic pressure transducer present in the hydraulic unit); heating flow/return temperature; external temperature (with external probe installed); domestic hot water temperature. Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: • there are no manual interventions - reduced measurements, calibrations or nozzle changes; • with this system, the boiler self-adapts to the quality of the gas and the length of the flue gas pipes, keeping efficiency constant; • the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions. Duo-tec E range: compatibility with Baxi Mago The entire Duo-tec E range is compatible with the Baxi Mago, available as an accessory, for remote boiler control. The boilers of the Duo-tec E range, if combined with the Baxi Mago, access the 65% deduction provided for by the 2019 Ecobonus. BAXI MAGO is the new generation chronothermostat designed to simplify the life of installers and users. An innovative and design tool, which combines extreme practicality with a modern, captivating aesthetic with a strong appeal. Furthermore, BAXI MAGO thinks about your savings: in fact it communicates with the boiler, optimizing consumption. And when you're away from home or just don't feel like getting off the sofa? BAXI MAGO can be managed from the app, comfortably with your smartphone. Smartphone management Automatic and fast programming Consumption under control Contact with the CAT Integrated systems: hydraulic, thermoregulation and control Electric three-way diverter valve (also for heating only models) Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense even in DHW operation Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Also for outdoor installation Duo-tec Compact E boilers can be installed outdoors in partially protected places thanks to the new top cover kit and bottom closure kit (available as accessories). In fact, the Duo-tec Compact E range is equipped AS STANDARD with an electronic antifreeze system which guarantees operation down to a temperature of -5 °C: the IPX5D protection also protects the electrical parts from jets of water which may come from all directions. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less