Buy wall mounted condensing boilers for maximum energy savings. Reliable performance, optimum efficiency and compact design. Choose from our selection of condensing boilers to heat your home efficiently and sustainably. Find out more today!
ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO:
DANNEGGIAMENTI SULLA PARTE SUPERIORE
BOZZATURA LATERALE DESTRO
PICCOLO DANNEGGIAMENTO AL LATERALE SINISTRO
IMBALLO USURATO
(PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE).
CALDAIA A GAS UNICAL KON M C24 A CONDENSAZIONE LOW NOX COMPLETA DI KIT FUMI METANO
Modello: KONm 24C
Efficienza Energetica:
Classe di efficienza stagionale per riscaldamento A
Profilo di carico dichiarato: XL
Classe di efficienza stagionale sanitaria: A
Dati tecnici:
Potenza utile nominale kw 23,6
Efficienza energetica stagionale del riscald. d’ambiente ηs 92%
Potenza termica utile in regime di alta temp. (Tr 60 °C / tm 80 °C): 12,7kW
Rendimento alla potenza termica nominale in regime di alta temperatura (Tr 60 °C / Tm 80 °C) η4: 87%
Potenza utile al 30% delle potenza termica nominale in regime di bassa temperatura (Tr 30 °C): 4,2kW
Rendimento al 30% delle potenza termica nominale in regime di bassa temperatura (Tr 30 °C) η1: 96,7%
Consumo elettricità annuale QHE GJ: 40
Efficienza energetica di riscald. dell’acqua ηWH: 86%
Consumo quotidiano di combustibile Qfuel : 22.0 kWh
Livello di potenza sonora all’interno Lwa db(A) 51
Consumo elettricità annuale AEC: 400kWh
Portata specifica acqua sanitaria (Dt 30 °C): 11,2 l/min
Produzione A.C.S. in cont. Dt 25 K (miscelata): 13,2 l/min
Capacità vaso espansione: 8 lt
Pressione del circuito di riscaldamento (min-max): 0,5-3,0 bar
Pressione del circuito sanitario (min-max): 0,5-6,0 bar
Grado di protezione IP X5D
Classe di NOx: 6
Dimensioni (HxLxP): 700x420x345 mm; 36,5kg
KONm l’ultima generazione di caldaie domestiche a condensazione di Unical, disponibile in versione:
combinata istantanea solo riscaldamento abbinabile a bollitore DSP 110 inox.
KONm presenta tutte le “Quality Stars” per soddisfare ogni tipo di esigenza:
Eccezionale rapporto di modulazione fino a 1:8 Rendimento >107% (ex dir. CE 92/42)
Scambiatore primario in Al/Si/Mg ultrapiatto
Elettronica con funzione HWS “Hot Water Speed” (vers. C)
Low NOx (classe 5 secondo EN 297 e EN 483) grazie al bruciatore premix modulante
Produzione di acqua calda fi no a 13,3 l/min Δt 25 con speciale scambiatore a 12 piastre (mod. 24 C) e 16 piastre (mod. 28/35 C) in acciaio inox Manutenzione “Pit stop”
Pannello comandi semplice ed intuitivo
Predisposta per le future applicazioni nei sistemi ed idonea a soddisfare i requisiti previsti nelle nuove norme di installazione
Circolatore modulante ad alta efficienza
Gestire 2 zone con 2 termostati KON m è versatile. Ideale per tutti gli impianti, grazie all’elettronica che permette di gestire 2 zone di riscaldamento a temperatura diversa (alta per radiatori e fan-coils, bassa per impianti a pannelli radianti) controllandole con termostati sia modulanti che on-off dedicati
Post-circolazione anti surriscaldamento di 15 secondi, mantiene l’equilibrio termico tra la mandata ed il ritorno, anche dopo intensi prelievi di A.C.S., mentre in riscaldamento, con una durata di 5 minuti, permette di smaltire tutta l’inerzia termica residua.
Funzionamento in temperatura scorrevole per la massima economia di gestione
Protezione antigelo interviene a 5°C e si attiva sia in sanitario che riscaldamento, portando la temperatura in caldaia a 15°C. Si evita il rischio che KON m possa gelare se perdurano basse temperature nel locale ove è installata. Qualora si verifi chi la mancanza di gas si avrà la segnalazione di blocco sul display.
Antibloccaggio pompa viene evitato il bloccaggio della pompa in seguito a lunghe soste grazie ad un impulso automatico di 5 secondi che l’elettronica lancia al motore ogni 24 ore di sosta.
Funzione spazzacamino regolazione facile come non mai della combustione. Una pressione del tasto di sblocco per più di 5 secondi per ottenere il funzionamento alla minima o alla massima potenza per 15 minuti, per un’analisi accurata della combustione
I dettagli di konm...
Forte delle sinergie costruttive aziendali, KONm riassume alcuni aspetti delle serie di alta gamma come lo scambiatore primario in Al/Si/Mg a basso contenuto d’acqua di “Scuola Unical”, l’originale meccanismo di ispezione rapida delle parti vitali del sistema di combustione assieme all’ampiamente collaudato ma aggiornato complesso di elettronica e sistema di premiscelazione a controllo elettropneumatico già in uso su altre gamme. Una sobria risposta ad alto contenuto tecnologico “ErP Ready”, ideale per il consumatore che si approccia alle tecnologie ad alto recupero energetico e per l’installatore che richiede semplici ma non banali soluzioni nell’impiantistica di sostituzione o nelle nuove costruzioni a basso impatto ambientale. KONm è fi rmata Unical.
Scambiatore esclusivo in Al/Si/Mg È realizzato in una speciale lega di Alluminio/Silicio/ Magnesio che ne assicura effi cienza e resistenza tanto che è garantito da Unical ben 5 anni. Grazie alla confi gurazione di scambio termico interno si raggiungono rendimenti superiori al 107% in regime di condensazione, che signifi cano per l’utente grande risparmio economico e ridottissimo impatto ambientale. Le versioni 28-35 sono adeguatamente maggiorate
Circolatore modulante con disareatore Rappresenta lo stato dell’arte nello standard dell’alta effi cienza. In linea con la direttiva ErP del 2015, con meno di 1 W di consumo in stand-by e soli 45 W in funzionamento massimo, grazie all’ampia capacità di modulazione, in base alla richiesta del termostato ambiente e alle temperature rilevate dai sensori posti in mandata/ ritorno, dosa automaticamente la potenza della caldaia alle esigenze dell’impianto. Particolarmente silenzioso e compatto, si integra con la valvola di sicurezza, il by-pass ed il rubinetto di scarico.
Ventilatore e Valvola gas elettropneumatica Il complesso di premiscelazione composto da elettrovalvola gas pneumatica e ventilatore modulanti si distingue per il limitato ingombro. Vantaggi:
compattezza e silenziosità
ampio range di modulazione 1:8
assoluta sicurezza d’esercizio per l’assenza di turbolenze
basse sollecitazioni termiche e meccaniche, quindi lunga durata, grazie all’inalterabilità.
La valvola è progettata per compensare le fl uttuazioni di pressione del gas presenti nelle reti nonché stabilizzare la pressione di alimentazione indipendentemente dalla pressione di aspirazione generata dal ventilatore del premix. La versione 28/35 è dotata di presa d’aria silenziata per migliorare la prestazione acustica ed anche di collettore aspirazione aria maggiorato. Facilmente regolabile, assicura una accurata miscela di combustione aria/gas per garantire elevati tenori di CO2 e favorire la condensazione con bassisssimi livelli di CO ed NOx . In sintesi il monoblocco si presta a facile manutenzione ed accessibilità.
Pulizia scambiatore 1 minuto e 46 secondi!
KONm è frutto dell’esperienza del Service e dei suggerimenti del mercato, da cui lo staff di progettisti Unical ha sintetizzato un complesso tecnologico facilmente assemblabile e rapidamente smontabile.
Comandi intuitivi
Il pannello elettronico di bordo risulterà immediatamente familiare. Non meno importante: tutte le operazioni di cablaggio e di intervento sono facilitate dal sistema di basculamento verticale. Il display LCD, a retroilluminazione temporizzata, multifunzione, permette:
Lettura delle temperature in riscaldamento e sanitario
Visualizzazione del blocco per mancanza di fi amma
Stato di funzionamento/stand-by
Diagnostica con segnalazione di 11 anomalie
Manopola: stand-by, selettore modalità e regolazione riscaldamento 30 - 85°C
Manopola regolazione sanitario 38 - 60°C
Garanzia ProdottoTutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
ATTENTION ! The boiler will be supplied with methane, for LPG operation you must contact your local Authorized Assistance Centre.
Technical features
Model : Divacondens D Plus
Nominal thermal power: 24 kW
Power supply: methane
Specifications Energy efficiency according to the European ErP directive
Heating Energy Efficiency Class: B
Seasonal Space Heating Energy Efficiency : 89%
Performance
Heating Thermal Capacity : 7,5 ~ 25,0 kW
Heating Thermal Power: 7.2 ~ 24.2 kW
Ultimate Thermal Efficiency 30% Pmin : 100.1%
Domestic Hot Water Production 25°C Δt 30°C : 13,9 ~ 11,6 l/min
NOx emissions 6
Dimensions and weight
Dimensions (LxHxP): 400x700x330 mm
Weight : 35Kg
Ferroli Divacondens D Plus Boiler The Simplest Solution For A Condensing Boiler
DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions.
The Range
Divacondens D Plus is offered in a single model for heating and instantaneous production of domestic hot water
Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages. > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Place of installation: also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. The performances Energy classification DHW load profile (maximum flow rate at the corresponding efficiency declared in DHW) Efficiency in the production of domestic hot water FOR COMBINED BOILERS The "climate-energy 20/20/20" package sets ambitious targets for the reduction of greenhouse gas emissions, of energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context, the European regulation ErP (Energy Related Products) introduces an energy classification also for water generators hot water for space heating and domestic hot water purposes. This classification translates into an energy label which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the product more efficient. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which, in the case of the single boiler product, ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the DHW flow rate of the appliance measured in a series of typical samplings, guaranteeing at least the declared DHW efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode.
SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
FERROLI DIVACONDENS D F24 METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT-NEW ERP
Technical features
Energy label specifications according to the European ErP directive
Class B heating energy efficiency
Sanitary energy efficiency profile XL Class A
Characteristics of heating/DHW operation:
Heating max heat input kW 25.8
Nominal thermal power Pn kW 24
Efficiency Pmax (80/60°C) % 96.5
Yield 30% % 103.5
Directive efficiency class 92/42 EEC ****
Max heating / sanitary operating pressure. bars 3 / 9
Max heating temperature 90 °C
Heating water content liters 1.5
Heating expansion tank capacity 8 litres
Exp. vessel preload pressure heating bar 1
Sanitary water content 0.3 litres
Sanitary flow rate ∆t 25°C l/min 14.0
Sanitary flow rate ∆t 30°C l/min 11.6
IP X5D degree of protection
Electric power absorbed W 95
Extremely compact dimensions (LxHxP): mm 400x700x330; 35kg
Sound power level LWA dB 57
NOx class 3
Power supply: METHANE
DIVA CONDENS D
DIVACONDENS D is the condensing heat generator for traditional heating systems.
The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes.
The quality of the DIVACONDENS line is unquestionable, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage with the "5 years worry-free" formula which also ensures periodic maintenance and legal checks.
Range
Divacondens D is available in two models for heating and instantaneous production of domestic hot water forced draft boiler and sealed chamber
mod. F 24 - MAXIMUM THERMAL CAPACITY 25.0 kW
mod. F 28 - MAXIMUM THERMAL CAPACITY 28.0 kW
Strengths:
Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels
Compact geometry primary heat exchanger entirely in copper
Instant production of domestic hot water with dedicated plate exchanger
Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit
Forced draught sealed chamber boiler, with AISI 304 stainless steel atmospheric burner
Standard hydraulic by-pass
High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity
Can be combined with the modulating remote timer control
Simple and complete control panel, display user interface, with setting keys
Advantages of Divacondens D:
Robust post-condenser powered by the closed circuit of the primary circuit, i.e. without the inlet of external mains water. The heat exchange with the fumes takes place inside large diameter water passages.
Generator with simple and rational operation
Condensate collection device to protect the air pressure switch, for regular combustion even in the presence of very cold external temperatures
ECO function in DHW for greater savings in the period of low use of hot water
Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems
Place of installation: also for outdoors in a partially protected place down to -5°C as standard
Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT)
Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available.
Functions:
ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage.
POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode.
SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user.
EASY CONTROL The DIVACONDENS D electronic board adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite
CONTROL UNIT The DIVACONDENS D control unit consists of an easy to use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time.
COMBINABLE WITH THE ROMEO CHRONO CONTROL: The Romeo chrono control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. Romeo is available with wired or wireless connection. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings.
Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED ASSISTANCE SERVICE IN ADVANCE
Junkers Bosch CONDENS 2200 W GC2200W 24/23 C 24 kW condensing boiler complete with methane or LPG fume exhaust kit class A - NEW ERP
Technical features
Declared load profile XL
Energy efficiency class A
Water heating energy efficiency class A
Rated thermal power Prated kW 24
Annual energy consumption QHE GJ 49
Seasonal space heating energy efficiency ηS % 94
Water heating energy efficiency ηwh % 85
Dimensions
Height (cm) :71
Width (cm) :40
Depth (cm) :30
Weight (kg): 35.00
Condensed 2200 W
Condens 2200 W is the new compact and versatile wall-mounted condensing boiler for heating and domestic hot water production
Maximum reliability
The new Condens 2200 W boiler stands out not only for its small size, but also for its high sturdiness, guaranteed by the Al-Si WB6 aluminum alloy primary exchanger
Great efficiency in a small space
The compactness and versatility of the new Condens 2200 W boiler make it the ideal solution in case of replacement, because it is able to adapt to any domestic environment
High performance in class A+
The new Condens 2200 W guarantees a seasonal efficiency of 94%, the maximum obtainable from a condensing boiler. If combined with a modulating thermoregulator with climatic function, it is also able to reach Class A+
Small size and new rounded design
High energy savings thanks to the seasonal efficiency of 94%
Ideal for replacement work
Modulation range up to 1:5
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
RIELLO RESIDENCE CONDENS 25 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP
Class A heating energy efficiency
Sanitary energy efficiency profile XL Class A
Heating/DHW operating characteristics
Nominal heat output (heating): 19.5 kW
Nominal heat input kW: 25 kW
Energy efficiency (92/42/EEC) ****
Profit return 30% (47th return): 108%
Sealed chamber, forced draught
Quantity of hot water with Δt 25°C: 15.1 l/min
Minimum domestic water flow rate: 2 l/min
Dimensions (hxwxd) mm 740x420x275; 35 kgs
Electrical protection degree: IP X5D
NOx class: 5
Power supply: METHANE
RESIDENCE CONDENS
RIELLO PRESENTS RESIDENCE THE NEW RANGE OF CONDENSING BOILERS
NEW EXCHANGER Wrapped stainless steel primary exchanger. Efficiency and reliability in the heart of the Residence.
DOMESTIC COMFORT FUNCTION Domestic water pre-heating with Touch&Go function for activation upon request directly from the drawing tap.
ACTIVE COMBUSTION CONTROL Advanced electronic combustion control system which constantly monitors combustion to obtain constantly optimized consumption and emissions.
DIGITAL USER INTERFACE Simple and intuitive backlit LCD display. Ease of setting thanks to the silk-screened keys dedicated to the individual user functions.
MODULATING CIRCULATOR High efficiency circulator with flow rate modulation and regulation logic that can be set between different modes according to the type of system.
HIGH EFFICIENCY The high efficiency of the primary exchanger, the modulating circulator and the continuous control of the combustion parameters guarantee very low consumption even after years of operation.
QUICK INSTALLATION Speed and ease of installation thanks to the compact dimensions, accessibility of the components and external electrical connections.
UNIQUE VERSION METHANE - LPG Dedicated codes are no longer necessary in the case of LPG because Residence is able to automatically adapt its operation to the type of fuel with rapid setting from the display.
FLEXIBLE INSTALLATION The characteristics of Residence and its compact dimensions make it the ideal solution for both indoor and recessed installation (model 25 KIS only) or outdoors in a partially protected place.
RESIDENCE, HEART OF STEEL
The new RESIDENCE exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. NEW PRIMARY EXCHANGER IN STAINLESS STEEL The single coil geometry (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber.
SELF-ADAPTING ELECTRONIC COMBUSTION CONTROL The new Residence is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionization electrode. Thanks to the ACC, Residence is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Residence also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the mixture. The ACC system also simplifies installation. During ignition, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. MANY NEEDS, ONE SOLUTION
RESIDENCE IS ALWAYS THE IDEAL CHOICE THANKS TO THE TECHNICAL SOLUTIONS AND THE COMPACT DIMENSIONS, IT CAN BE USED IN ANY INSTALLATION SITUATION
INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment.
OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the accessory antifreeze heater kit
RECESSED Inside a built-in box thanks to its compact dimensions (model 25 KIS only).
NEW DIGITAL CONTROL Setting your own comfort for domestic hot water, air and heating is immediate thanks to the buttons with symbols dedicated to the individual functions
Domestic hot water temperature setting
Operating status 0FF - SUMMER - WINTER
Unlock and restore alarms
Information and parameters menu
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
ARISTON CONDENSING BOILER CLAS ONE L 30 kW METHANE COMPLETE WITH FUME EXHAUST KIT Wi-Fi OPTIONAL
Technical features
Product code: 3301024
Energy label specifications according to the European ErP directive
Class A heating energy efficiency
Sanitary energy efficiency profile XL Class A
Characteristics of heating/DHW operation:
Nominal heat input max/min heating kW 28 / 4.3
Nominal DHW max/min heat input kW 30 / 4.3
Useful heat output max/min heating kW 27.4 / 3.9
Efficiency at nominal heat input (60/80°C) 97.9%
Efficiency at nominal heat input (30/50°C) 107.3%
Efficiency at 30% (30°C) 109.6%
Heating max/min temperature (high temperature) °C 83/35
Heating max/min temperature (low temperature) °C 46/20
Max/min domestic hot water temperature °C 61 / 36 quantity of hot water (deltaT 25°C) 16.4 l/min
Quantity of hot water (deltaT 35°C) 11.7 l/min
Specific flow rate (first 10' with deltaT 30°C) 14.5 l/min
Minimum operating temperature (-5°C with antifreeze kit)** °C > 0°
Total absorbed electrical power 78 W
Degree of protection of the electrical system IP X5D
Dimensions 24 kW mm (HxWxD) 745 x 400 x 315
Power supply: METHANE
Functionality:
Wi-Fi optional
XtraTech™ stainless steel primary exchanger
AUTO, Comfort functions
Indoor installation and partially protected places
ONE Series, the new generation of condensing boilers
New XTRATECH™ exchanger: Maximum quality.
XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time.
Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first.
Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component.
Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers.
The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time
Always connected with Ariston NET
Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone.
Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs!
Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET.
Absolute efficiency: Thermoregulation in class A+
The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+ !
Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch.
Total Comfort: Innovative functions to meet your needs
ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy.
Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption.
Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products.
Care function: Automatic reminder of routine maintenance.
NEW CLASS ONE L
Clas ONE 30 L is the ideal condensing boiler for replacement, especially on large old systems.
Advantages compared to the Clas ONE 30: 10-litre oversized expansion tank, 7-metre oversized high-efficiency circulator, 20-plate DHW exchanger, bypass with rigid spring.
New XtraTech™ exchanger in exclusive* Ariston stainless steel, with high head
Exchanger passage sections +142% compared to the previous version
LCD display
Class A+ in heating reachable with thermoregulation
Modulation ratio 1:7
Prepared for Ariston NET connectivity
BusBridgeNet® communication protocol
AUTO function, Comfort
Optimized internal silencer
Sanitary heat exchanger increased 20 plates
Expansion vessel increased real 10 l
By-pass with rigid spring
High efficiency circulator increased 7 m
Installation in partially protected places
Smoke outlet 80, 60, 50 mm
Ecodesign directive: from 2015 only new condensing boilers
After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings .
What is Energy Labeling?
Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to:
An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated.
As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot.
How to read energy labels
There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications).
In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.).
It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
Hermann Saunier Duval Condensing Boiler THEMIS CONDENS 24 kW low NOx Methane Complete with Smoke Exhaust Kit cod. 0010028067 - NEWS
ErP - Energy class
Heating efficiency class B
Sanitary efficiency class A
Sanitary load profile XL
CE identification number PIN CE 0476CQ0908
Heating
Fireplace flow rate Qmin/max - 80/60°C kW 13.0/24.0
Rated power Pmin/max - 80/60°C kW 12.5/23.04
Rated power Pmin/max - 50/30°C kW -
Efficiency Pmax - 80/60°C - 50/30°C % 96.0 / -
Efficiency P30% - 40/30°C % 99.7
Cloak losses - Bruc. On - 80/60°C Pmax/Pmin % 0.1/2.3
Chimney losses - Bruc. On - 80/60°C Pmax/Pmin % 2.2/1.9
Chimney losses - Bruc. Off - heating/DHW % 0.3/0.7
Min/max delivery temperature °C 30/85
Boiler operating pressure min/max bar 0.3/3
Heating expansion vessel - Capacity/preload l/bar 7/0.75
Sanitary
Domestic hot water production type Instantaneous
ACS quality classification (EN 13203-1) 2 stars
Capacity at the hearth min/max - 60°C kW 13.0/24.0
Rated power min/max - 60°C kW 12.3/23.2
Continuous flow rate (∆T= 25K) l/m 13.8
Specific flow rate (∆T = 30K) (EN13203) l/m 11.4
Peak flow rate in 10 minutes (∆T = 30K) l/10 min 114
DHW temperature min/max °C 35/65
DHW storage heat loss kWh/24h -
Min/max supply pressure bar -/8
generals
Gas category II2H
Supply pressure mbar 20
Heating gas flow Pmin/Pmax m3/h 2.66
DHW gas flow rate Pmax m3/h 2.66
Voltage/frequency/intensity V/Hz/A 230/50/0.66
Absorption - Peak/Pmax/Pmin/Stand-by W - / - / 60 / -
Heating flue temp. (50-30°C) Pmin °C 51
Sanitary fume temp. (DHW T=50°C) Pmax °C 68
Flue gas heating Pmin/Pmax g/s -
CO2 Pmax % 7
Weighted NOx (0% O2) mg/kWh 56.0
Residual head at the fan Pa -
IPX 4D electrical protection
Weight kg 38
Dimensions
70 cm high, 40 wide and 29.5 deep (24 kW)
THEMIS CONDENS Low NOx - NEW
Wall-mounted condensing boiler for heating and domestic hot water, for high temperature systems.
The new Themis Condens Low NOx is the condensing solution developed by Hermann Saunier Duval to replace traditional wall-mounted boilers combined with radiators that require high inlet temperature values. The main novelty is the low NOx emission burner (class 6) which makes it possible to comply with the ErP regulations in force since November 2018 in the EU. The boiler, which features a renewed casing, is designed to allow easy installation and maximum ease of management, boasting a new extremely intuitive user interface. Themis Condens Low NOx combines the simplicity of the traditional boiler with the efficiency of condensing boilers, guaranteeing the right comfort both in heating and in the production of domestic hot water. It is available in a single model with natural gas supply, power equal to 24 kW in both heating and DHW. Themis Condens Low NOx is a boiler specifically designed for high temperature systems. It was developed to give the right comfort, both for the production of sanitary water and to provide the ideal climate in the rooms. Themis Condens low NOx combines the simplicity of the traditional boiler with the efficiency of condensing boilers. The range consists of a single model with combined production of domestic hot water and heating, it is available in natural gas only . Condensing boiler with a new forced draft atmospheric burner studied and designed to have low NOx emissions , traditional copper exchanger protected with a special aluminum paint and aluminum post-condenser. The boiler features a new high-efficiency pump with high performance and a 7-litre expansion vessel.
New burner with low NOx emissions (class 6)
Designed for replacement in high temperature systems
New casing with reduced dimensions
High efficiency pump
New simple and intuitive user interface
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance
Ferroli BLUEHELIX PRO RRT 28 C methane or LPG condensing boiler Complete with Lox NOx Fume Exhaust Kit - NEW
Energy label specifications according to the European ErP directive
Class A heating energy efficiency
Sanitary energy efficiency profile XL Class A
Characteristics of heating/DHW operation:
Thermal power 80°C-60°C Max Heating: 24.0 / 4.9 kW
Thermal power 50°C-30°C Max Sanitary: 26.0 / 5.4 kw
Useful thermal efficiency 30%: 109.7
Max working pressure heating bar 3
NOx class 6
Sanitary flow rate ∆t 25°C 15.8
Protection degree (IEC 60529) IP X5D
Supply voltage V/Hz 230V / 50Hz
Dimensions HxWxD mm 700x420x250
BLUEHELIX PRO RRT
The quality of the BLUEHELIX line is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and statutory checks
> STRONG POINTS: - With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix Pro" series - DUAL STAINLESS STEEL exchanger : boiler with primary exchanger for heating and domestic hot water in very thick stainless steel integrated in a single component (DUAL). High efficiency even during DHW operation (94%). - Increased hydraulic passages of the exchanger both on the heating circuit and on the DHW circuit. - : in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) - MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) - MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits - Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace - Hydraulic connections covered by the boiler casing - Large backlit multifunction graphic display for easy and correct setting of the parameters - Standard by-pass > BENEFITS OF bluehelix PRO RRT C: - Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes - FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard - Designed to simplify and facilitate normal maintenance and cleaning operations - Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems - STOP AND GO: it is possible to delay the ignition of the burner by activating it only in the face of real withdrawals of domestic hot water - 3-star certified comfort in sanitary manufacturing according to EN 13203 - Minimum polluting emissions (class 6 according to EN 15502-1) - Sliding temperature operation via optional external probe - Low consumption modulating heating pump (ErP Ready - Class A) - Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) - Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit - Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
LPG operation with the use of a special conversion kit to be requested from the Authorized Assistance Centre, we recommend contacting the local assistance center before purchasing
Technical features
Model : Divacondens D Plus F24
Power supply: LPG
Energy efficiency
Heating energy efficiency class: B
Sanitary energy efficiency class: A
ACS profile : XL
Performance
Heat output : 7.5 ~ 25.0 kW
Thermal power 80°C ~ 60°C : 7.2 ~ 24.2 kW
Thermal power 50°C ~ 30°C : 7.7 ~ 26.2 kW
Useful thermal efficiency 80°C ~ 60°C : 96.0% ~ 96.9%
Useful thermal efficiency 50°C ~ 30°C : 102.4~ 104.0%
NOx emissions : 6
Maximum production of domestic hot water Δt 25°C : 13.9 l/min
Maximum production of domestic hot water Δt 30°C : 11.6 l/min
Heating working pressure: 0.8 ~ 3 bar
Sanitary operating pressure: 9 bar
Dimensions and weight
Dimensions (LxHxP): 400x680x330 mm
Empty weight: 35.0 kg
5 years without worries
Extension of the manufacturer's standard warranty to 5 YEARS on Ferroli brand gas condensing boilers of less than 35 kW in the DIVACONDENS and BLUEHELIX series through the local authorized Ferroli technical assistance centre.
Wall-mounted boiler Ferroli DIVACONDENS D PLUS Atmospheric wall-mounted condensing boilers, with instantaneous domestic hot water production
The simplest solution for a condensing boiler
DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. DIVACONDENS D PLUS is offered in a single model for heating and instantaneous production of domestic hot water
Product plus
> Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels
> Compact geometry primary exchanger
> Instant production of domestic hot water with dedicated plate exchanger
> Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit
> Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions
> Standard automatic hydraulic by-pass
> Minimum polluting emissions, class 6 according to EN 15502-1
> High-efficiency, low-consumption circulator with anti-blocking system by activation for a few seconds every 24 hours of inactivity
> Can be combined with the modulating remote timer control
> Simple and complete control panel, display user interface, with setting keys
> Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages
> Generator with simple and rational operation
> ECO function in DHW for greater savings in the period of low use of hot water
> Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems
> Place of installation : also for outdoors in a partially protected place down to -5°C as standard
> Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center
> Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre
Boiler control
The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time.
Main components
Heat recovery Post-condenser with recovery of latent heat from the combustion fumes and condensate discharge
Steel frame Made with high precision automated processes. Incorporates an 8 liter expansion vessel
Central heating primary exchanger protected by a non-toxic aluminum coating
Low NOx burner Water-cooled low temperature micro flame type. Minimum NOx emissions
High efficiency circulator , for heating and exchange with the DHW circuit
Domestic hot water exchanger In stainless steel, with copper brazing
ECS - Evolved Combustion System Innovative combustion control that guarantees optimal functioning under various thermal load conditions and types of chimney
Optimize comfort and savings "ROMEO N" timer control
The ROMEO N timer control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. ROMEO N is available with wired or wireless connection.
With ROMEO N you can:
Adjust the heating and DHW temperatures
Know the operating status of the boiler
View the indoor temperature in your home
Program the weekly ambient comfort
Activating/deactivating the heating function via the telephone (Optional)
Smart CONNECT remote control
Remote control supplied with the class A+ kit code for home comfort management also from a Smartphone
Possibility of managing up to 8 zones using additional room units
Connection to the home Wi-Fi network via the supplied RF/Wi-Fi receiver
CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android)
Maximization of room comfort with modulating regulation of the flow temperature through the Room Climatic Compensation functions differentiated for each zone and External Climatic Compensation via external temperature detectable directly from the internet or from an optional external probe
It improves the average seasonal efficiency in space heating by +4%.
Weekly time programming in 30-minute intervals via APP CONNECT
Operating modes : Off, Holiday, Automatic, Manual
Three modifiable temperature levels : Comfort, Economy, Antifreeze
By reading the external temperature directly from the internet (or from the optional external probe) the system is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, thus guaranteeing the user maximum room comfort at the change in external climatic conditions.
The modulating function of CONNECT allows modulation of the boiler power as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings
Solar circuit integration Sun Easy function
DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and turns on the burner only if necessary.
In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature.
If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves.
To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost.
Safety and comfort Functions
Antifreeze In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage
Post-circulation This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function and is active after the burner goes out in heating mode.
Sliding temperature operation With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user
Easy Control The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO N and CONNECT remote timer controls. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite
Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
Caldaia Baxi a condensazione NUOVA PRIME 26 completa di Kit Scarico Fumi Metano o Gpl A7697098 Wi-Fi OPTIONAL
Modello: Prime 26;
Tipologia: Condensazione;
Installazione: Consigliata per interni;
Classe energetica in riascaldamento ErP: A;
Classe energetica in produzione di ACS ErP: A;
Profilo di carico: XL;
Alimentazione: Metano o Natural Gas (G20/G21); Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario)
Performance :
Portata termica nominale sanitario kW 26,7
Portata termica nominale riscaldamento kW 20,6
Potenza termica nominale sanitario kW 26
Efficienza energetica stagionale del riscaldamento d’ambiente ŋs % 93
Emissioni di ossidi di azoto NOx mg/kWh 38
Temperatura minima di funzionamento °C -5
Capacità vaso espansione riscaldamento l 7
Regolazione temperatura acqua circuito riscaldamento °C 25-80
Portata minima acqua circuito sanitario l/min 2
Pressione minima acqua circuito riscaldamento bar 0,5
Pressione massima acqua circuito sanitario bar 8
Dimensioni:
Dimensioni (h x l x p) mm 700x395x279
Tipo di Gas Metano/GPL/Aria propanata
Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario)
NUOVA PRIME
Ideale per la sostituzione di caldaie convenzionali.
La gamma di caldaie a condensazione Prime si articola in due modelli, 26 e 30 kW per riscaldamento e produzione istantanea acqua calda sanitaria. Prime è stata progettata rispettando i requisiti delle Direttive Ecodesign e Labelling. Il regolamento sull’etichettatura (Regolamento UE 2017/1369) richiede di etichettare i prodotti secondo una scala energetica decrescente che va dalla A++ alla G e che passerà dalla A+++ alla F dal 26/09/2019. La classe energetica, identificata da una lettera, esprime un intervallo di valori di efficienza entro il quale risiede quello espresso dal prodotto in esame. L’etichetta nasce per consentire al consumatore finale, fornendo dati veri e comparabili, di fare scelte consapevoli indirizzandosi su prodotti ad alta efficienza.
I vantaggi della caldaia a condensazione Prime
Facile utilizzo grazie al pannello di controllo dotato di manopole e display LCD retroilluminato
Facile installazione grazie alle dimensioni ultracompatte (700x395x279 mm - incluse manopole) e al peso contenuto (26 kg)
Facile sostituzione di caldaie convenzionali grazie allo scarico fumi centrale
Campo di modulazione 1:5 maggiore efficienza e silenziosità
Predisposizione per abbinamento con il sistema solare integrato Baxi
Scarico sdoppiato Ø 80 di serie
Allacciamento a tubo di scarico Ø 50 mm rigido e flessibile: soluzione per risanamento canne fumarie
- per il mod. 26 kw lunghezza totale (scarico + aspirazione) 35 metri
Allacciamento a canne fumarie collettive in pressione
Caldaie funzionanti a metano trasformabili a GPL e ad aria propanata mediante apposita regolazione (kit di trasformazione non necessario)
Sistema idraulico
Valvola deviatrice a tre vie elettrica
Bruciatore a premiscelazione in acciaio inox
Scambiatore acqua/fumi in acciaio inox
Scambiatore sanitario in acciao inox
Ventilatore modulante a variazione elettronica di velocità
By-pass automatico
Pompa di circolazione ad alta efficienza
Sistema antibloccaggio pompa e valvola a tre vie che interviene ogni 24 ore
Valvola di sicurezza circuito riscaldamento a 3 bar
Vaso espansione da 7 litri
Sistema di termoregolazione
Predisposizione per il collegamento ad un impianto a zone
Abbinamento a termostato/cronotermostato modulante
Sistema di controllo
Termostato di sicurezza contro le sovratemperature dello scambiatore acqua/fumi
Pressostato idraulico che blocca il gas in caso di mancanza d’acqua
Sonda NTC di sicurezza contro le sovratemperature dei fumi
Controllo temperature mediante sonde NTC
Dispositivo antigelo totale
Termometro elettronico Manometro circuito riscaldamento
Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED LPG OPERATION USING A SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED AREA SERVICE CENTER
Ferroli DIVACONDENS D PLUS F24 LOW NOx condensing boiler complete with flue gas exhaust kit WITH RBM DIRT SEPARATOR INCLUDED
Energy label specifications according to the European ErP directive
Class B heating energy efficiency
Sanitary energy efficiency profile XL Class A
Performance
Heat input Min Max Heating kW kW 7.5 25.0
Thermal power 80°C - 60°C Min Max Heating kW 7.2 24.2
Useful thermal efficiency 30% Pmin % 100.1
Domestic hot water production Δt 25°C Δt 30°C l/min l/min 13.9 11.6
NOx emissions 6
Dimensions WxHxD mm 400x700x330; 35kg
DIVACONDENS D PLUS
DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions.
Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages. > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Place of installation: also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. The performances Energy classification DHW load profile (maximum flow rate at the corresponding efficiency declared in DHW) Efficiency in the production of domestic hot water FOR COMBINED BOILERS The "climate-energy 20/20/20" package includes ambitious targets for reducing greenhouse gas emissions, of energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context, the European regulation ErP (Energy Related Products) introduces an energy classification also for water generators hot water for space heating and domestic hot water purposes. This classification translates into an energy label which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the product more efficient. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which, in the case of the single boiler product, ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the DHW flow rate of the appliance measured in a series of typical samplings, guaranteeing at least the declared DHW efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode.
SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite.
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE AREA HERMANN ASSISTANCE IN ADVANCE
Hermann Saunier Duval Combitek 24-AS/1 low NOx gas boiler complete with methane or LPG fume exhaust kit - News Select the smoke kit in the drop-down menu!
Product specifications Condensing
Type of installation Wall
Type of fuel Methane
Manufacturer's warranty (in years) 2
Energy class in heating A
Domestic hot water energy class A
Rated power (in kW) 24
Instant hot water production
Modulation range 1:5
Integrated thermostat No
Ideal for N° floors 1
Net weight (in kg) 25.6
Flow (in l/min) 14
Packed product: width (in cm) 36
Packed product: depth (in cm) 49
Packed product: height (in cm) 89
Packed product: weight (in kg) 30.2
COMBITEK
The optimal solution for heating and domestic hot water preparation .
Excellent value for money, both for new builds and replacements
It can be retrofitted into existing heating and hot water supply systems
The project has been developed to offer the optimal solution in terms of price , performance and quality .
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
