IMMERGAS VICTRIX MAIOR 28 TT CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Product code: 3.024879 Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Heating / domestic hot water nominal heat input kW 24.9 / 29.1 Heating/DHW maximum nominal useful power kW 24.0/28.0 Supply voltage/frequency: 230/50 Volt/Hz Electrical insulation degree X5D Boiler dimensions (HxLxP) mm 748 x 440 x 276 Empty boiler weight 33.4 kg Gas version available: METHANE Warm-up exercise: Maximum pressure and temperatures bar 3 Head available with flow rate 1000 l/h 37.2 kPa Nominal system expansion tank capacity 10 l Healthcare exercise: DHW circuit max pressure bar 10 Min. domestic hot water withdrawal 1.5 litres/min DHW adjustable temperature 30 - 60 °C VICTRIX MAIOR 28 TT Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Renewable energies: it can be combined with solar systems and hybrid systems with heat pump. Maximum flexibility: approved to operate indoors, built-in and outdoors, even in the open. IPX5D electrical protection. Standard antifreeze down to -5 °C. Maximum compactness: only 25 cm deep. IMMERGAS IS READY TO DO ITS PART FOR THE ENVIRONMENT! It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/EC) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for instruments that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX EXA 28 KW CONDENSING ERP COMPLETE WITH FUME EXHAUST KIT Technical features Immergas Victrix Exa 28 kW boiler Capacity: 28Kw Useful heating power kW: 28, DHW useful power kW: 32.0 Type: Instant Modulation range: 25 - 100 % Hot water production (∆t 30 °C) l/min: 15.3 Electrical protection degree IPX: 5D Dimensions (HxWxD) mm: 763 x 440 x 300 ; 42kg VICTRIX EXA With VICTRIX EXA comes a generation of condensing boilers that offers all the advantages of condensation in maximum simplicity and economy. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. The condensing module is in stainless steel and the circulator is low consumption. The modulation range of the appliance goes from 23 to 100% of the thermal power. The user interface is simple to use, it is equipped with adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. VICTRIX EXA can also be managed from smartphones, tablets and laptops (the DOMINUS App will be available from January 2016). The casing covering the water connections is standard, to better set up the boiler inside domestic spaces. Approved to operate indoors or outdoors in a partially protected place thanks to the IPX5D degree of electrical protection, the boiler is equipped with standard frost protection down to -5 °C. VICTRIX EXA can also be used in GAUDIUM SOLAR BASE ErP systems. With reduced emissions of carbon monoxide (CO) and nitrogen oxides (NOX), VICTRIX EXA falls into class 5, the most ecological envisaged by European standards (UNI 297 and 483). The VICTRIX EXA range offers all the advantages of condensation in maximum simplicity and economy. The most compatible technology with the new European Directives and with the aim of reducing energy consumption, is presented in the most economical and effective way for many new installations and replacements of existing appliances. The VICTRIX EXA are two instantaneous boilers of 24 and 28 kW, capable of making a consistent contribution to raising the energy efficiency class in space heating and in the production of domestic hot water. Wall installation is easy both indoors and outdoors and the VICTRIX EXA range also offers the possibility of operating with propane air by choosing the dedicated conversion kit. The condensing module is in stainless steel and the circulator is low consumption, all made more comfortable and easy to install thanks to the compact dimensions. The user interface is simple to use, it features adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. The lower casing to cover the connection pipes is standard, while the connection group is optional for all models SIMPLICITY OF CONTROLS The boiler also features an advanced and easy-to-use user interface with LCD display, selection buttons and adjustment knobs. The latter allow you to make temperature adjustments quickly and easily. ECOLOGICAL BOILER VICTRIX EXA has low emissions of carbon monoxide (CO) and nitrogen oxides (NOx) such as to be included in class 5, the most ecological in the classification established by the European standards UNI EN 297 and UNI EN 483. They can therefore discharge through the wall in the cases provided for by Legislative Decree 102 of 4 July 2014. CLASS A CIRCULATOR The low-consumption circulator allows considerable savings in electricity compared to a traditional circulator and adjusts its consumption according to the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W)   IMMERGAS IS READY TO DO ITS PART FOR THE ENVIRONMENT! It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/EC) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for instruments that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase and provides only for the supply of spare parts.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE IMMERGAS AREA ASSISTANCE IN ADVANCE IMMERGAS VICTRIX 24 TT CONDENSING ERP COMPLETE WITH FUME EXHAUST KIT Technical features Immergas Victrix 24 TT condensing boiler Capacity: 24Kw Useful heating power kW: 20.5 DHW useful power kW: 23.6 Type: Instant Modulation range: 15 - 100% Hot water production (∆t 30 °C) l/min: 11.3 Electrical protection degree IPX: 5D Dimensions (HxWxD) mm: 748 x 440 x 280 VICTRIX TT The VICTRIX TT ErP range, intended for new installations and above all for the replacement of existing appliances, has been designed to comply with the new European Directives on the use of energy, increasingly oriented towards condensing technology to more easily reach the efficiency classes high in space heating and in the production of domestic hot water in homes. VICTRIX TT ErP, produced in the new highly automated lines of the company's historic headquarters in Brescello, incorporates the innovative condensing module which guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater corrosion resistance thanks to the special alloy with which it is made. Reduced consumption thanks to the class A circulator and boiler power modulation up to 15%: ideal condition for mid-seasons or reduced loads. In addition to a very low environmental impact, the boiler features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display for viewing operating temperatures, operating status and error codes. HIGH HYDRAULIC PERFORMANCE The condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion. The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15). CLASS A CIRCULATOR The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, it can be set in Auto or Fixed operating modes. WIDE MODULATION RANGE The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the appliance (from 15% to 100% of the thermal power) determines high seasonal yields. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EVOLVED DESIGN The VICTRIX TT ErP range is designed to make the work of professionals easier. Immergas has invested significant resources for the industrialization of the parts of the appliance, making it particularly robust and has paid the utmost attention to details and finishes. VICTRIX TT ErP presents new technical features such as: • safety valve drain conveyed to the condensate drain • removable cover for direct access to the electrical connection compartment • cover casing for the water connections to better position the boiler in domestic spaces DIRECT ACCESSIBILITY TO THE ELECTRICAL CONNECTIONS COMPARTMENT In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main devices that can be combined (for example CARV2, external probe, CRONO 7). ELECTRONIC AIR/GAS CONTROL The electronic gas valve allows air/gas control by means of a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows VICTRIX TT ErP to be powered with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Methane, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. Technical features Model : ALTEAS ONE+ NET 35 Code: 3301773 Nominal heat input in heating max/min PCI : 31.0 / 3.5 kW Nominal heat input in DHW max/min PCI : 34.5 / 3.5 kW Power supply: methane/LPG Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A+ Sanitary Energy Efficiency Class: A Withdrawal profile: XXL Combustion efficiency (flue gas) % 97.9 Efficiency at nominal heat input (60/80°C) PCI % 98.1 Efficiency at nominal heat input (30/50°C) PCI % 107.8 Efficiency at 30% at 30°C PCI % 109.4 Minimum efficiency (60/80°C) PCI % 94.2 health circuit DHW temperature min/max °C 36/60 Specific flow rate in DHW (10 min. with ΔT=30°C) l/min 16.5 Instantaneous quantity of hot water ΔT=25°C l/min 19.8 Instantaneous quantity of hot water ΔT=35°C l/min 14.1 Domestic water pressure max/min bar 7/0.2 Minimum withdrawal of hot water l/min 2 Dimensions and weight LEGEND A System delivery Ø 3/4” gas B DHW outlet Ø 1/2” gas C Gas inlet Ø 3/4” gas D DHW inlet Ø 1/2” gas E System return Ø 3/4” gas Weight : 36kg Description Latest generation condensing boiler with integrated Wi-Fi and voice control. Compatible with hydrogen blends up to 20%. VOICE CONTROL: With Alteas ONE+ NET your voice is enough to manage the comfort of your home, thanks to the integration of the Ariston NET App with Google home and Amazon Alexa. H2 READY: Compatible with 20% hydrogen blends. An important first step in our ongoing commitment to using hydrogen for heating. CLASS A+: Thanks to the SENSYS HD series thermostat it is possible to reach class A+ and save on bills. Maximum durability thanks to the Ariston exclusive XtraTech™ heat exchanger Ignition System+ for electronic combustion control Tempered and scratch resistant glass panel Sensys HD thermostat included as standard Integrated Wi-Fi, always connected to the Ariston NET App for remote control Voice control thanks to integration with Google home and Amazon Alexa Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: THIS ARTICLE WILL COME AFTER JANUARY 6 Ariston condensing boiler Genus One+ Net 35 kW Low NOx Methane or LPG with free Sensys HD smoke kit STANDARD Wi-Fi Alexa and Google Home - NEW Energy class A++* Energy class in sanitary A Pickup profile XXL COMBUSTION Nominal heat input in heating max/min PCI kW 31.0 / 3.5 Nominal heat input in DHW max/min PCI kW 34.5 / 3.5 Max/min heating thermal power (80°C-60°C) PCI kW 30.3 / 3.3 Efficiency at 30% at 30°C PCI % 109.4 HEATING CIRCUIT Maximum heating pressure 3 bar Expansion vessel capacity l 8 Heating temperature min/max °C 20 / 82 SANITARY CIRCUIT Min/max DHW temperature °C 36 / 60 Instantaneous amount of hot water ?T=25°C l/min 19.8 ELECTRICAL DATA Supply voltage/frequency V/Hz 230/50 Degree of protection of the electrical system IP X5D Dimensions HxDxL mm 745x385x400; 35kg *Achievable with standard thermoregulation accessory and web reference for external temperature Genus One+ Net Ariston excellence guaranteed for 10 years thanks to the smart protection assistance programme. Latest generation condensing boiler integrated wifi and voice control , hydrogen compatible up to 20%. Voice control With genus ONE+ NET your voice is enough to manage the comfort of your home, thanks to the integration of the ariston net google home amazon alexa app Ariston NET With ariston NET you have comfort at your fingertips. Remote control, consumption reports and online technical support, all in one free smartphone app Top of the range condensing boiler, with integrated connectivity and compatible with 20% hydrogen blends Patented XtraTech™ high head stainless steel heat exchanger Modulation ratio 1:10 Low NOx levels (24 mg/kWh) Silent operation (only 46 db(A)Mod. 24kW) Compatibility with natural gas, LPG and propane air without the use of kits Ignition Control System+, stable and safe performance Hydro Sensor System, constant monitoring of system pressure Flow Control System+, optimal balance of flow and comfort Integrated Wi-Fi and ARISTON NET connectivity as standard Tempered and scratch resistant glass panel Large LCD display with touch interface Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! Built-in unit is purchased separately. Technical features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Sanitary energy efficiency class: A Performance Stars : ★★★★ Heating power : 5.2 kW ~ 25.1 kW DHW power : 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min DHW temperature adjustment : 35°C ~ 60°C Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection : IPX5D Power supply: LPG Optional accessories Built-in box 0010030848 Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Wall-mounted built-in condensing boiler Vaillant ecoINWALL plus VMW So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW wall-mounted built-in boiler for domestic heating and the production of domestic hot water. With the combination of the convenient built-in feature, it allows for wall-mounted installation that is completely hidden in the wall in just 25 centimetres With this solution, Vaillant responds to the needs of residential construction: limited spaces inside homes and aesthetic constraints that prevent the installation of visible boilers on balconies and terraces. Being dedicated to the outside of the building, the boiler is equipped as standard with protection against frost down to -15°C. From the display of the specific remote control, the user is able to carry out the operations of control, regulation and signaling of any anomalies, remaining comfortably inside the house. Thanks to the pre-heating system and the NTC probes which monitor and prevent sudden changes in temperature, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the smart answer for modern installations, but a concentration of performance, savings and technology that does not require any space inside the home. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High DHW comfort thanks to settable pre-heating Exchanger in stainless steel Modulation 1:5 8 liter expansion tank Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with standard remote control inside the house Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 34 Heating nominal heat input kW 28.9 Sanitary nominal thermal power kW 33 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.6% Efficiency at 100% Pn (50-30°C): 105.4% Expansion/pre-charge vessel capacity l/bar 7.5/0.8 Sanitary water temperature adjustment °C 35-60 Boiler capacity 40 l Boiler expansion vessel capacity/pre-charge l/bar 2/3.5 Sanitary water production ∆T 25°C l/min 18.9 Sanitary water production at discharge ∆T 30°C l/30' 500 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (hxlxp): 950x600x466 mm ; 67.5 kgs Power supply: CNG or LPG * Operation with LPG through adjustment by the Authorized Service Centre Cloud Platinum+ Wall mounted gas condensing boilers for heating and DHW production with storage Total modulation pump The Luna Platinum+ range is renewed with the introduction of a high efficiency electronic pump with permanent magnet motor. The new fully modulated pump allows, compared to using a pump Traditional modulating: Lower electricity consumption Better performance Greater durability Plant deaeration New electronic "system deaeration" function to facilitate the removal of air during initial ignition. Efficiency and savings The objective of a heat generator is to supply the energy necessary to the rooms to maintain conditions of maximum comfort inside them: this means supplying the rooms, through the system, with the same amount of heat that the building loses . In new buildings, the regulations increasingly require greater insulation and consequently less dispersion. Usually there is a tendency to oversize heat generators to favor the production of sanitary water: this leads to an excess of power in heating which, together with the poor modulation capacity of traditional boilers, causes discontinuous functioning and therefore waste of fuel. Discontinuous processes generate energy losses (heat dispersion caused by the pre-washing of the combustion chamber, component wear caused by continuous on-off, decrease in generator efficiency). The modulation system of the Platinum+ range is able to adapt the thermal power produced to the effective power dissipated by the building, avoiding excessive overheating/cooling of the rooms. Wide modulation range Reduction of on-off cycles The graph shown above highlights the reduction in on/off cycles which distinguishes the new Platinum+ boilers with modulation up to 1:10 compared to a condensing boiler with lower modulation. The reduction of the on/offs determines an improvement in the efficiency of the boiler and consequently a considerable saving for the end user. Standard condensing boilers, on the other hand, with a limited modulation range work at a minimum power level above 6 kW; this allows it to avoid the on/off cycles for only 3% of the period of operation in heating, compromising the performance of the boiler and the life of the components. GAC: Gas Adaptive Control The electronics and the gas valve with stepper motor that the new Platinum+ boilers are equipped with guarantee automatic combustion control which is based on: on the flame signal GAC via the flame signal The system continuously measures the flame signal during boiler operation and adjusts the gas flow rate in order to keep the combustion quality constant and all this without requiring any additional component inside the combustion chamber. Installers and end users enjoy the following benefits of the GAC: The automatic combustion control favors a reduction in installation times as no manual adjustment of the gas valve or nozzle change is required: in fact, it is sufficient to manually modify some parameters of the electronic board for operation with LPG The boiler self-adapts to the quality of the gas and the length of the flue gas outlets: this means that there are no manual adjustments to make High modulation field 1:10: high efficiency and savings, since such a wide modulation field determines a greater adaptability of the boiler to the thermal dispersions of the building to obtain a higher efficiency and greater durability of the components. The reduction of the on/off cycles, in addition to the greater efficiency, guarantees less noise produced by the boiler Unlike traditional condensing boilers, the boiler always works adjusted to maximum efficiency values ​​favoring a reduction in gas consumption and consequently a lower environmental impact thanks to the control of CO/CO emissions Power sets The term Power set identifies the heating power regulation process according to the project data. The thermal capacity of the boiler, through the Power set device, is adjusted according to the energy requirement: just act on the control panel to adjust some parameters Complete soundproofing C structure Silence is the relative or absolute absence of sound or noise. The noise level of the Luna Platinum+ boiler is comparable to a normal conversation Digital pressure gauge The electronic pressure transducer in the hydraulic unit allows you to check the pressure directly on the display. Double alarm level in the event of low pressure: a "warning" level in the event of low pressure in the boiler; a "block" level in the event of a lack of pressure Intubation solution For the rehabilitation of flues Baxi has developed a system that allows easy ducting into existing flues thanks to a Ø50 mm exhaust pipe (for 24kW models). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli condensing boiler Bluehelix HiTech RRT 28 K 50 with 50 liter storage tank low NOx flue gas kit for methane or LPG - New Heat input Min / Max Heating 3.5 / 24.5 Min / Max Sanitary heat output 28.5 Heating power Min / Max Heating 3.4 / 24.0 Thermal power 28 max Useful thermal efficiency 80°C-60°C Pmax % / Pmin % 98.1 / 98.0 NOx class 6 Boiler capacity 50 litres Heating efficiency class A Sanitary Efficiency Class A XL load profile Dimensions HxWxD mm 807x600x434 Bluehelix HiTech RRT K 50 > STRONG POINTS: - Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt - : in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) - Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (mod. 34) - MC2 : Multi Combustion Control, new combustion system with patented gasadaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) - MGR: Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits - Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace. - Production of domestic hot water with 50 liter stainless steel storage tank - Arrangement for recirculation attachments (present in the accessory: attachment connection kit) - Hydraulic connections covered by the boiler casing - Standard by-pass - "Range Rated" certified generator: the maximum heat input in heating mode can be adapted to the heat requirements of the system while maintaining the efficiency values ​​declared in the approval > BENEFITS OF BLUEHELIX HITECH RRT K 50: - Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes - FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard - Designed to simplify and facilitate normal maintenance and cleaning operations - Anti-legionella function with programmable timing from 1 to 7 days - Timed anti-blocking for circulator and three-way valve - Sliding temperature operation via optional external probe - Place of installation: also for outdoors in a partially protected place up to -5°C as standard - Free methane/LPG/propaneted air transformation during the initial product check and activation of the conventional guarantee, to be requested from the Authorized Assistance Center

Read more less

Ariston condensing boiler Genus One+ Net 30 kW Low NOx Methane or LPG with free Sensys HD smoke kit STANDARD Wi-Fi Alexa and Google Home - NEW Energy class A++* Energy class in sanitary A XL withdrawal profile COMBUSTION Nominal heat input in heating max/min PCI kW 28.0 / 3.0 Nominal heat input in DHW max/min PCI kW 30.0 / 3.0 Heating thermal power max/min (80°C-60°C) PCI kW 27.5 / 2.8 Efficiency at 30% at 30°C PCI % 109.3 HEATING CIRCUIT Maximum heating pressure 3 bar Expansion vessel capacity l 8 Heating temperature min/max °C 20 / 82 SANITARY CIRCUIT Min/max DHW temperature °C 36 / 60 Instantaneous amount of hot water ?T=25°C l/min 17.2 ELECTRICAL DATA Supply voltage/frequency V/Hz 230/50 Degree of protection of the electrical system IP X5D Dimensions HxDxL mm 745x385x400; 34kg *Achievable with standard thermoregulation accessory and web reference for external temperature Genus One+ Net Ariston excellence guaranteed for 10 years thanks to the smart protection assistance programme. Latest generation condensing boiler integrated wifi and voice control , hydrogen compatible up to 20%. Voice control With genus ONE+ NET your voice is enough to manage the comfort of your home, thanks to the integration of the ariston net google home amazon alexa app Ariston NET With ariston NET you have comfort at your fingertips. Remote control, consumption reports and online technical support, all in one free smartphone app Top of the range condensing boiler, with integrated connectivity and compatible with 20% hydrogen blends Patented XtraTech™ high head stainless steel heat exchanger Modulation ratio 1:10 Low NOx levels (24 mg/kWh) Silent operation (only 46 db(A)Mod. 24kW) Compatibility with natural gas, LPG and propane air without the use of kits Ignition Control System+, stable and safe performance Hydro Sensor System, constant monitoring of system pressure Flow Control System+, optimal balance of flow and comfort Integrated Wi-Fi and ARISTON NET connectivity as standard Tempered and scratch resistant glass panel Large LCD display with touch interface Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Hermann Saunier Duval Themafast Condens 30 CS/1 Methane boiler complete with fume exhaust kit - New Model: Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 3.6 - 25.5 Fireplace flow rate Qmin/max - 60°C 3.6 - 31.0 Sanitary Specific flow rate (∆T = 25K) (EN13203) l/min 17.8 Peak flow rate in 10 minutes (∆T = 30K) l/10 min 148 Dimensions (HxWxD) 740x418x344 ThemaFast Condens All the comfort, immediately. Characterized by a renewed design with modern and essential lines, flat casing to facilitate installation in the home and touch-screen user interface, the new ThemaFast Condens range is positioned at the top of its category in terms of sanitary comfort and consumption reduction . The exclusive Aquaspeed FAST® system and the new 3-litre micro-accumulator ensure immediate delivery of domestic hot water - even in the case of minimal withdrawals - and maximum temperature stability. The new FlameFit® combustion technology is able to autonomously adapt to the different types of gas, always managing to generate perfectly efficient combustion in total safety. The range consists of three models of 25, 30 and 35 kW with methane fuel, convertible to propane through simple electronic regulation. Hydraulic connections and dimensions are unchanged compared to the previous version Superior sanitary comfort New 3 liter microaccumulator Immediate delivery of domestic hot water Maximum temperature stability New FlameFit® combustion technology High modulation up to 1:9 Modern design with touch-screen user interface New diagnostics and malfunction detection Aquaspeed FAST® and new microaccumulator: unique comfort Thanks to the exclusive Aquaspeed FAST ® technology , the domestic hot water is stored in a 3-litre micro-accumulator which guarantees the immediate availability of hot water without the temperature fluctuations typical of the first delivery phase. The new micro-accumulator, made of stainless steel and composite material, is insulated with two expanded polystyrene shells to reduce heat losses in stand-by. Externally, a small resistance (max 25 W) keeps the water always at the desired temperature, avoiding costly multiple ignitions of the burner in case of low flow rate withdrawals. When the withdrawal is greater than 1.7 litres/min, the boiler starts up and, through the instantaneous DHW exchanger, goes into continuous production according to the user's requests. At the end of the withdrawal, the micro-accumulator is already at the set temperature, ready for the next request. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all ThemaFast Condens models are equipped allows the boiler to be independently adapted to the different types and qualities of gas, always guaranteeing optimized and fully safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes ThemaFast Condens ready for operation with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new ThemaFast Condens has a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION FOR THE OPERATION OF THE LPG BOILER IT IS NECESSARY TO CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Beretta MYNUTE E 32C Low NOx condensing boiler complete with flue gas kit 20164602 Methane or LPG Wi-Fi Optional - NEW Boiler code 20164602 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A XL load profile NOx emission class 6 Technical features Heating thermal capacity (max-min) kW 29.00-6.00 Nominal DHW heat input (max-min) kW 31.60-6.00 Expansion vessel capacity on membrane l8 DHW production at ΔT= 25°C / 30°C / 35°C l/min 18.1/15.1/12.9 Supply voltage V-Hz 230 - 50 IP X5D degree of protection DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 29 kgs MYNUTE E BERETTA PRESENTS MYNUTE E, THE NEW CONDENSING BOILER WHICH, COMBINING RELIABILITY AND COMFORT WITH INSTALLATION FLEXIBILITY, IS THE IDEAL CHOICE FOR REPLACING The new MYNUTE E range is divided into three models combined in 25 kW and 32 kW power, one of which is a 25 kW DIN version, to also allow the replacement of boilers with hydraulic standards other than Beretta. The linear and modern design, in line with the recent generation Beretta boilers, the compactness of the dimensions and the installation flexibility make MYNUTE E easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or built-in, using dedicated accessories. The good efficiency, which places the range in class A, the ease of use and maintenance, and the excellent comfort, both in heating and DHW, complete the profile of this product, which will be appreciated for its reliability and functionality, in perfect harmony with the MYNUTE Beretta tradition. MYNUTE E, RELIABILITY AND FLEXIBILITY FOR A WORRY-FREE REPLACEMENT FEATURES Aluminum condensing exchanger Modulation range 1:5 Low consumption modulating circulator (EEI ≤ 0.20), 6 m Low NOx emissions: CLASS 6 (UNI EN 15502) Availability of 25kw model also with sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Installation flexibility: indoor, outdoor and recessed installation (in a partially protected place) The 25C and 25C DIN models are C10 approved. Smoke clapet (non-return valve) available as an accessory Click-fit flue connection: fast and safe, without the need for an external collar Antifreeze heater kit, hydraulic connections and external probe available as accessories IPX5D electrical protection degree “DOUBLE T” template supplied Compatible with hybrid connects for managing up to two system zones Compatible with air-propane gas (25C and 25C DIN models) and with LPG, through optional kits. For gas conversion, contact authorized Beretta Technical Assistance Centres Compatible with BeSmart WiFi comfort control as thermostat (OTBus communication), allowing the most advanced functions Possibility of intubating flues with the special flue in PP ø50, ø60 and ø80 Polyphosphate dosing filter and compact magnetic filter available as accessories Hybrid Ready: Mynute E can be integrated into Beretta multi-energy systems through the Rec 10H Hybrid and the Connect Hybrids, available as accessories CONNECTIVITY WITH BeSMART (wi-fi optional) MYNUTE E is equipped with a control panel that stands out for its ease of use. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the MYNUTE E functions. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE E FUNCTIONS MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC ACCESSORIES PREHEAT PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

NB: FOR THE OPERATION OF THE LPG BOILER IT IS NECESSARY TO CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Beretta MYNUTE E 25C Low NOx condensing boiler complete with Methane or LPG fume exhaust kit - NEW Boiler code 20164601 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A NOx emission class 6 XL Load Profile Technical features Heating thermal capacity (max-min) kW 25.00-5.00 Nominal DHW heat input (max-min) kW 25.00-5.00 Expansion vessel capacity on membrane l8 DHW production at ΔT= 25°C / 30°C / 35°C l/min 14.3/11.9/10.2 Supply voltage V-Hz 230 - 50 IP X5D degree of protection DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 29 kgs MYNUTE E BERETTA PRESENTS MYNUTE E, THE NEW CONDENSING BOILER WHICH, COMBINING RELIABILITY AND COMFORT WITH INSTALLATION FLEXIBILITY, IS THE IDEAL CHOICE FOR REPLACING The new MYNUTE E range is divided into three models combined in 25 kW and 32 kW power, one of which is a 25 kW DIN version, to also allow the replacement of boilers with hydraulic standards other than Beretta. The linear and modern design, in line with the recent generation Beretta boilers, the compactness of the dimensions and the installation flexibility make MYNUTE E easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or built-in, using dedicated accessories. The good efficiency, which places the range in class A, the ease of use and maintenance, and the excellent comfort, both in heating and DHW, complete the profile of this product, which will be appreciated for its reliability and functionality, in perfect harmony with the MYNUTE Beretta tradition. MYNUTE E, RELIABILITY AND FLEXIBILITY FOR A WORRY-FREE REPLACEMENT FEATURES Aluminum condensing exchanger Modulation range 1:5 Low consumption modulating circulator (EEI ≤ 0.20), 6 m Low NOx emissions: CLASS 6 (UNI EN 15502) Availability of 25kw model also with sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Installation flexibility: indoor, outdoor and recessed installation (in a partially protected place) The 25C and 25C DIN models are C10 approved. Smoke clapet (non-return valve) available as an accessory Click-fit flue connection: fast and safe, without the need for an external collar Antifreeze heater kit, hydraulic connections and external probe available as accessories IPX5D electrical protection degree “DOUBLE T” template supplied Compatible with hybrid connects for managing up to two system zones Compatible with air-propane gas (25C and 25C DIN models) and with LPG, through optional kits. For gas conversion, contact authorized Beretta Technical Assistance Centres Compatible with BeSmart WiFi comfort control as thermostat (OTBus communication), allowing the most advanced functions Possibility of intubating flues with the special flue in PP ø50, ø60 and ø80 Polyphosphate dosing filter and compact magnetic filter available as accessories Hybrid Ready: Mynute E can be integrated into Beretta multi-energy systems through the Rec 10H Hybrid and the Connect Hybrids, available as accessories CONNECTIVITY WITH BeSMART (wi-fi optional) MYNUTE E is equipped with a control panel that stands out for its ease of use. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the MYNUTE E functions. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE E FUNCTIONS MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC ACCESSORIES PREHEAT PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less