Fondital ITACA KC 28 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - LPG Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 26.4 kW Rated heat output: 27.9 kW Efficiency at maximum power: 96.4% Efficiency at 30% load: 107.0% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 15.5 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion tank capacity: 10 l Consumption in heating at nominal power Natural gas m3 /h 2.79 DHW consumption at nominal power Natural gas m3 /h 3.22 Total absorbed electrical power: 91 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 39kg LPG power supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with room temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion tank Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RINNAI condensing boiler ZEN 29 kW Low NOx Integrated Wi-Fi Integrated Condensate Neutralizer cod. REB-KBI2929FF-LPG LPG Complete with Smoke Kit Code REB-KBI2929FF-NG Heating energy efficiency class A Profile / Domestic hot water energy class XL / A Noise level indoors (dB) 44 Performance Nominal heat input on PCI Heating (kW) 29.0 Qnw Nominal heat input on Sanitary PCI (kW) 29.0 NOx class 6 Maximum electric power absorbed in heating (W) 100 Degree of protection IPX5D Expansion vessel content (l) 7.5 Domestic hot water delivery (∆T=35°C) (l/min) 11.6 Dimensions Dimensions (W x H x D) (mm) - Empty weight (kg) 440x660x285 - 33 ZEN Zen is the new 100% Rinnai domestic condensing boiler , with WiFi chronothermostat as standard. Thanks to the "My Rinnai" APP, using and monitoring the generator is very simple: just one click to set the temperature, check consumption and change the programming for unexpected changes in plans, such as a last-minute evening with friends. Performing on any type of system, range rated and full condensing, Zen is the perfect Rinnai solution for domestic comfort. Small in size and big in performance, Zen is easy to install and guarantees a low environmental impact. The heart of the boiler has extraordinary performances The metal fiber burner is ultra low NOx, with values ​​that satisfy the most restrictive European regulations: Zen reaches the best class of merit (Class 6) for its low environmental impact and is positioned as the most eco-sustainable product in its category. The 100% Rinnai heat exchanger is made of stainless steel, completely recyclable, designed to ensure complete condensation and last over time. Innovative earthquake safety sensor In the event of medium or high intensity seismic events (increasingly frequent also in our country) the boiler automatically isolates itself from the gas system, limiting the risk of leaks, explosions or fires, which can make the affected environment even more dangerous. earthquake. Can also be installed outdoors Zen is IPX5D certified and features the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection. Integrated condensate neutraliser The Zen series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutraliser, in fact, allows the acidity of the condensate to be eliminated (water with an acid pH produced by the normal operation of the boiler, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory which performs this function. otherwise essential. Integrated climatic probe The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adjusting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Wi-Fi as standard Zen offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE JUNKERS BOSCH CERAPUR BUILT-IN CONDENSING BOILER ZWB 28-1 EI 24 kW INCLUDING FUME KIT - NEW ErP ErP energy class (Heating and DHW) For heating and domestic hot water production DHW nominal heat input kW 28 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat input (sanitary): 7.4 kW Sanitary flow rate ΔT = 30 K: 13.4 l/min NOx class: 5 Voltage v(AC): 230 HZ frequency: 50 Absorbed electric power: 230 W IP Protection Degree: X5D Dimensions: 243 x 533 x 775; 47 kgs Standard: Controllable from home - Management of the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. CerapurRecessed CERAPUR INCASSO is designed for concealed installations and encloses maximum comfort in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. In fact, CERAPUR INCASSO integrates perfectly into the façade thanks also to the possibility of painting the "shell" with the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in the niche in the wall Controllable from inside the house - Management of the boiler directly from inside the house, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the aluminum alloy construction of the primary exchanger Electrical insulation - The boiler has an IPX5D degree of electrical insulation Characteristics: Wall-mounted condensing boilers for outdoor use with DHW production that can be combined with solar thermal systems for DHW using the Solar Kit. C13, C33, C63, C83, B33 type certifications obtained. Suitable for use with Ø 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a special niche, dedicated to the built-in Guscio (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the DHW and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW and heating). Patented high efficiency silicon-aluminum alloy primary heat exchanger. Oversized sanitary plate heat exchanger for condensing also in DHW. Heating side expansion vessel of 6 litres. Circulator in Energy Class A. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 24/28 AS/1-1 Article code : 0010026088 Power supply: LPG Performance Heating power : 6.9 ~ 23.9 kW Nominal heat input in DHW : 6.9 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 108.2% Domestic hot water production (ΔT = 30K): 13.4 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE BAXI AREA ASSISTANCE IN ADVANCE Baxi Luna Duo-tec E 28 Low NOx condensing boiler complete with standard Baxi maGO LPG flue exhaust kit Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input 28.9 kW Nominal heating flow rate 24.7 kW Sanitary nominal thermal power 28 kW Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -5°C Expansion vessel capacity 8 Degree of protection IPX5D Dimensions (hxwxd) mm 763 x 450 x 345 Power supply: LPG Luna Duo-tec General characteristics New modern and elegant design for the whole range Wide modulation range up to 1:7 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - for mod. 24 kW total length 40 meters (intake + exhaust) hydraulic system Electric three-way diverter valve (also heating only models) Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense as well in sanitary operation Modulating fan with electronic variation of speed Automatic by-pass High efficiency circulation pump full modulation Pump anti-blocking system and three-way valve which occurs every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Standard climate control (with external probe optionally available) Preparation for connection to a zone system Control system safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch that blocks the gas in case of lack of water NTC safety probe against smoke overtemperatures Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE AND IS ADJUSTABLE TO LPG. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Pro VMW 286 Methane model with Wi-Fi: 0020256401 Energy Class in Heating: A Energy Class in Sanitary: A Heating power: 6.2 - 24.0 kW Sanitary power: 6.2 - 28.0 kW Withdrawal flow rate (ΔT = 30K) : 13.4 l/min DHW temperature adjustment: 35° - 65° C Possible diameter of burnt gas outlets: 60/100 mm; 80/125; 80/80; 60/60mm Gas Pipe Diameter: 12.70 mm (1/2") Hydraulic Pipe Diameter : G3/4" Dimensions (HxWxD): 720x440x338 mm Warranty program 7 All Vaillant condensing boilers are included in the Guarantee Program 7. By purchasing a Vaillant condensing boiler you can extend the guarantee from 2 to 7 years and benefit from exclusive advantages: No fixed call fee Free labor Free original spare parts VMW EcoTEC Pro boiler All models in the VMW ecoTEC pro range feature etas = 94% efficiency. For this reason, if combined with a class VI thermoregulation (such as vSmart), they reach a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler (heating and DHW production) is available in 23kW and 28 kW power ratings. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing considerable savings throughout the year. Its simplicity of adjustment makes it the ideal boiler for all users, as well as having an extremely simple interface with plain text and backlit display for ease of use ecoTEC pro is the ideal boiler for Vaillant on Vaillant replacements: installation is simple and quick, as is adjustment of the operating parameters. The ecoTEC pro range includes: the combined version, the smart connectivity version in combination with vSMART, a version designed for installation in multiple collective flues and two versions for installations in single collective flues. ecoTEC pro CM is also the right choice for boiler replacement in multi-family houses or for more complicated installations. Vaillant in fact provides a range of products suitable for the flue as well as multiple options as regards the accessories dedicated to the boiler: a flue pressure switch, combined with the electronics, self-adjusts the value to be set for the length of the vertical ducting so as to correctly evacuate the exhaust fumes. The ecoTEC pro CS models are equipped with a dedicated kit, included in the supply, consisting of a smoke non-return valve, 87° bend and 80/125mm rigid section for connection to a single collective flue Small size The small size of ecoTEC pro VMW allows it to be installed in any environment: ✔ 70cm height ✔ 44cm wide ✔ 35cm depth (identical to the previous version) Available with additional approval for outdoor installations down to -5°C Control the heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing ecoTEC plus to be controlled and adjusted at any time, from anywhere, quickly and intuitively. Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Characteristics Solution for heating and domestic hot water Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

UNICAL KON M C28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power in condensing 28.9 Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C) 15.8 kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) : 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Domestic hot water specific flow rate (Dt 30 °C) ''D'' 13.0 DHW production in cont. Dt 25 K (mixed) -/15.5 IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345 mm; 36.5kg KONm KONm the latest generation of domestic condensing boilers by Unical, available in the version: combined instantaneous heating only that can be combined with the DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: THE CURVE AND THE PIPE FOR THE COAXIAL KIT MUST BE PURCHASED SEPARATELY Rinnai Condensing Boiler Momiji 29 kW Complete with Flue Kit with Integrated Wi-Fi Chronothermostat Low NOx LPG REB-KAI2529FF Code RREB-KAI2529FF Heating energy class A XL load profile Nominal thermal power kW 24 EN677 efficiency on PCI (80-60°C) % 96.1 Nominal power modulation (80-60°C) Heating kW 8.2 - 23.8 NOx class 6 Maximum electric power absorbed in heating W 98 Electrical power in stand-by W < 3 Supply voltage V/Hz 230 / 50 Degree of protection IPX5D Domestic hot water delivery (ΔT=35°C) l/min 11.6 Domestic hot water delivery (ΔT=25°C) l/min 16.3 Dimensions (H x W x D) (mm)660x440x285 MOMIJI The warm embrace of autumn MOMIJI are the red maple trees typical of the Orient, whose leaves color autumn red, a season that the Japanese experience as "comfort". Thanks to the mild climate and temperatures that are once again welcoming (no longer the torrid heat of summer, not yet the freezing climate of winter), taking time out is even more pleasant. Enjoying your home, as well as the foliage, gives well-being. Momiji best interprets the combination of traditional systems and condensing technology. In fact, while integrating perfectly with different systems, it is designed to optimize the condensation technology on radiator systems, responding concretely to the needs for savings and eco-sustainability of this type of heating, extremely widespread but often unable to fully exploit the advantages of condensation. The heating is smart Momiji offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adapting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Momiji Comfort has never been easier Easy, everywhere Like the Rinnai Infinity water heaters, the Momiji boilers are also specifically designed to facilitate the installer's work. The device is small, light and compact. It is ready to use and does not need to be configured. The flue system is split Ø80/80 and, thanks to the high prevalence of the fan, it is possible to reach up to 30 equivalent linear metres. Thermal exchange Momiji has a copper heat exchange, with a large passage section: this facilitates integration into existing radiator systems and simplifies cleaning operations. This range of boilers is the perfect solution for often imperfect traditional systems. Can also be installed outdoors Momiji is IPX5D certified and has the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection Integrated condensate neutraliser The Momiji series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutralizer, in fact, allows you to eliminate the acidity of the condensate (acidic pH water produced by the normal operation of the heat generator, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory that performs this function otherwise essential. Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

RINNAI condensing boiler ZEN 29 kW Low NOx Integrated Wi-Fi Integrated Condensate Neutralizer cod. REB-KBI2929FF-NG Methane Complete with Fume Kit Code REB-KBI2929FF-NG Heating energy efficiency class A Profile / Domestic hot water energy class XL / A Noise level indoors (dB) 44 Performance Nominal heat input on PCI Heating (kW) 29.0 Qnw Nominal heat input on Sanitary PCI (kW) 29.0 NOx class 6 Maximum electric power absorbed in heating (W) 100 Degree of protection IPX5D Expansion vessel content (l) 7.5 Domestic hot water delivery (∆T=35°C) (l/min) 11.6 Dimensions Dimensions (W x H x D) (mm) - Empty weight (kg) 440x660x285 - 33 ZEN Zen is the new 100% Rinnai domestic condensing boiler , with WiFi chronothermostat as standard. Thanks to the "My Rinnai" APP, using and monitoring the generator is very simple: just one click to set the temperature, check consumption and change the programming for unexpected changes in plans, such as a last-minute evening with friends. Performing on any type of system, range rated and full condensing, Zen is the perfect Rinnai solution for domestic comfort. Small in size and big in performance, Zen is easy to install and guarantees a low environmental impact. The heart of the boiler has extraordinary performances The metal fiber burner is ultra low NOx, with values ​​that satisfy the most restrictive European regulations: Zen reaches the best class of merit (Class 6) for its low environmental impact and is positioned as the most eco-sustainable product in its category. The 100% Rinnai heat exchanger is made of stainless steel, completely recyclable, designed to ensure complete condensation and last over time. Innovative earthquake safety sensor In the event of medium or high intensity seismic events (increasingly frequent also in our country) the boiler automatically isolates itself from the gas system, limiting the risk of leaks, explosions or fires, which can make the affected environment even more dangerous. earthquake. Can also be installed outdoors Zen is IPX5D certified and features the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection. Integrated condensate neutraliser The Zen series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutraliser, in fact, allows the acidity of the condensate to be eliminated (water with an acid pH produced by the normal operation of the boiler, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory which performs this function. otherwise essential. Integrated climatic probe The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adapting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Wi-Fi as standard Zen offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

ATTENTION, THE BOILER CAN BE ADJUSTED FOR LPG OPERATION. CONTACT YOUR LOCAL AUTHORISED SERVICE CENTRE Technical features Model : Condens GC7000iW 28 BC Product code : 7736901597 Color : Black Power supply: Methane/LPG Energy efficiency Energy efficiency class in ACS: A Energy efficiency class in heating: A Load profile: XL Performance Nominal thermal power: 24.0 kW Nominal heat output: 24.6 kW Nominal thermal power for domestic hot water: 28.0 Kw Seasonal space heating energy efficiency: 93.0 ηs % Seasonal DHW energy efficiency: 83.0 ηs % Sound power level: 50 dB(A) Class : NOx 6 Dimensions and weight Dimensions (DxWxH): 350x440x840 mm Weight: 43.0 Kg CONDENS 7000i W Design and innovation love at first sight. Ask for the best, she will give it to you. Aesthetics, innovation and savings. The new Condens 7000i W gas condensing wall-mounted boiler has a refined and exclusive design, with a white or black titanium tempered glass casing, and a heart full of technological innovations. Simple to use, it guarantees high savings and reduced consumption. Condens 7000i W is available in several versions to meet all your heating and hot water needs: heating-only version with 14 and 24 kW power, and combined version to also produce domestic hot water with 24, 28 and 35 kW power. Designed to offer you excellence Whether you want to modernise your heating system or you are looking for a boiler for your new home, the advantages of Condens 7000i W are a guarantee: by choosing this boiler you ensure only the best from every point of view. Consumption only according to your needs Condens 7000i W automatically adjusts power and consumption to your actual needs for domestic comfort and hot water, reducing waste. Furthermore, the condensation technique allows you to exploit the heat of the exhaust gases, increasing the efficiency of the boiler. Control your system via the dedicated App Condens 7000i W is perfectly compatible, in the case of single-zone heating systems, with the Bosch CT100 digital thermostat. This refined and elegant thermostat allows you to adjust the heating based on your presence at home and allows you, thanks to the Bosch Control app, to control your boiler wherever you are and at any time. For you only the best The quality is Bosch Thanks to the use of top-quality components, such as the aluminum-silicon alloy heat exchanger designed, patented, built and guaranteed by Bosch, the long-term reliability of this boiler is a certainty you can always count on. Black or white A question of style Choosing it is a real pleasure Condens 7000i W is the perfect choice for those seeking beauty and innovation. The refined and attractive design, with a titanium tempered glass casing with rounded corners, available in white or black, is ideal for adapting to all domestic environments, even the most modern and sophisticated. This innovative material gives numerous advantages to your boiler: it is robust, unbreakable, easy to clean and does not show signs of aging. Thanks to its elegant and refined look, the boiler transforms into a real piece of furniture. Unique on the outside, perfect on the inside Innovative technology... not just aesthetics! Condens 7000i W is designed to simplify installation and maintenance operations to the utmost by specialized technical personnel. Once opened, Condens 7000i W will never cease to amaze you. Quick and easy installation Condens 7000i W includes a pre-installation plate as an accessory to facilitate assembly; it is also compatible with the connections of previous Junkers Bosch wall-mounted boiler models, so you can use existing hydraulic and gas connections and save time. Quick and easy maintenance The internal design of the Condens 7000i W allows easy access to all components, which are clearly recognisable at first glance. The industrial design of this boiler means that it is assembled in a modular and orderly manner, ensuring speed and precision in maintenance operations. 360-degree reliability Bosch carefully selects all components, focusing on quality. The electronics are developed by Bosch; the heart of the boiler, the aluminum-silicon alloy exchanger, is also developed, produced, certified and guaranteed directly by Bosch. The aluminum-silicon alloy resists temperature fluctuations, giving the exchanger qualities of lightness, strength, efficiency and silence. Adapts to every need The wide continuous modulation of the power of Condens 7000i W, with a range of up to 1:8, will satisfy all comfort and consumption needs. The wide modulation is allowed by the Venturi tube, an innovation that makes the boiler highly efficient. Furthermore, the choice between LPG and methane is simplified to minimize setting operations. Intuitive and fast programming The Condens 7000i W display, circular and backlit, allows for fast and intuitive programming thanks to the easily understandable menu. In addition, the integrated climate control further simplifies the commissioning of the boiler. Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS BOILER JUNKERS BOSCH mod. CONDENS 7000i GC7000iW 28 kW METHANE CONDENSING + FLUE KIT - WHITE - ErP Technical specifications For heating and domestic hot water production Heat and DHW energy efficiency class (ErP) Seasonal space heating energy efficiency ns % 93 Useful efficiency (Hi - 50/30 °C) % 100 Modulation range 1:8 Nox class 6 Net weight) kg 43 Dimensions (L x W x H) mm 350x440x840 SMOKE EXHAUST KIT INCLUDED IN THE PRICE! By Regional Resolution, only boilers with the NOx 6 characteristic can be installed in the Lombardy and Piedmont regions Main features CONDENS 7000i W Design and innovation love at first sight. Ask her for the best, she will give it to you. Aesthetics, innovation and savings. The new Condens 7000i W wall-hung gas condensing boiler has a refined and exclusive design, with a black or white titanium tempered glass shell, and a heart full of technological innovations. Simple to use, it guarantees you high savings and low consumption. Condens 7000i W is available in several versions to satisfy all your heating and hot water needs: heating only version (with power of 14 and 24 kW) and combined version to also produce domestic hot water (with power of 24, 28 and 35 kW). Designed to offer you excellence Whether you want to modernize your heating system or you are looking for a boiler for your new home, the advantages of Condens 7000i W are a guarantee: by choosing this boiler you can ensure only the best under every point of view. Consumption only according to your needs Condens 7000i W automatically adjusts power and consumption to your real domestic comfort and hot water needs, reducing waste. Furthermore, the condensing technique makes it possible to exploit the heat of the exhaust gases, increasing the efficiency of the boiler. Control your system via the dedicated App Condens 7000i W is perfectly compatible, in the case of single-zone heating systems, with the Bosch CT100 digital thermostat. This refined and elegant thermostat allows you to adjust the heating based on your presence in the house and allows you, thanks to the Bosch Control app*, to control your boiler wherever you are and at any time. Only the best for you: quality is Bosch Thanks to the use of top quality components, such as the aluminum-silicon alloy heat exchanger designed, patented, built and guaranteed by Bosch, the reliability of this boiler over time is a certainty you can always count on. White or Black: a question of style Choosing it is a real pleasure Condens 7000i W is the optimal choice for those looking for beauty and innovation. The refined and captivating design, with titanium tempered glass casing with rounded corners, available in the white or black version, is ideal for adapting to all domestic environments, even the most modern and sophisticated. This innovative material gives your boiler many advantages: it is robust, unbreakable, easy to clean and does not show signs of ageing. Thanks to the elegant and refined look, the boiler is transformed into a real piece of furniture. Condens 7000i W is designed to simplify installation and maintenance operations by specialized technical personnel as much as possible. Once opened, Condens 7000i W will never cease to amaze you. Quick and easy installation Condens 7000i W includes the pre-installation plate as an accessory to facilitate assembly; it is also compatible with the connections of the previous models of Junkers Bosch wall boilers, so as to be able to use the existing water and gas connections and save time. Quick and easy maintenance The internal design of the Condens 7000i W allows easy access to all components, which are clearly recognizable at first glance. The industrial design of this boiler means that it is assembled in a modular and orderly manner, guaranteeing speed and precision in maintenance operations. All-round reliability Bosch carefully selects all components, focusing on quality. The electronics are developed by Bosch; the heart of the boiler, the aluminum-silicon alloy exchanger, is also developed, produced, certified and guaranteed directly by Bosch. The aluminum-silicon alloy resists temperature swings, giving the exchanger qualities of lightness, sturdiness, efficiency and silence. It adapts to every need The wide continuous modulation of the power of Condens 7000i W, with a range up to 1:8, will make it possible to satisfy all comfort and consumption needs. The wide modulation is allowed by the Venturi tube, an innovation that makes the boiler highly efficient. Furthermore, the choice between LPG and methane is simplified to minimize setting operations. Intuitive and fast programming The circular and backlit display of Condens 7000i W allows fast and intuitive programming thanks to the easily understandable menu. Furthermore, the integrated climatic thermoregulation further simplifies the commissioning of the boiler. The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: o the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances or the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caratteristiche tecniche Modello : Residence IN 30 KIS Codice prodotto : 20189652 Potenza nominale : 24,0 kW Alimentazione :Metano/gpl (con kit di trasformazione) Efficienza energetica Classe di efficienza energetica stagionale del riscaldamento : A Classe di efficienza energetica del sanitario : A Efficienza energetica stagionale del riscaldamento : 93% Consumo energetico annuo : 56 GJ Potenza termica utile Potenza termica nominale e a regime di alta temperatura : 24,4 kW Potenza termica nominale e a regime di bassa temperatura : 8,2 kW Efficienza utile Alla potenza termica nominale e a regime di alta temperatura : 87,6 % Al 30% potenza termica nominale e a regime di bassa temperatura : 98,2 % Consumi elettrici ausiliari A pieno carico : 38,0 W A carico parziale : 12,0 W In modalità Stand-by : 3,0 W Performance in riscaldamento Portata termica : 3,95 ~ 25,0 kW Pressione massima : 3 bar Temperatura massima : 90° C Performance in sanitario Portata ACS minima : 2 l/min Pressione massima : 8 bar Produzione ACS : 12,3 ~ 14,3 ~ 17,2 kW Dati installativi Diametro tubo entrata / uscita riscaldamento : 3/4" Diametro tubo entrata / uscita sanitario : 1/2" Dimensioni e peso Dimensioni (AxLxP) : 740x420x275 mm Peso : 33,0 Kg Caldaia murale a condensazione Riello RESIDENCE IN La soluzione efficiente, dove lo spazio fa la differenza Residence In è la soluzione Riello pensata per le esigenze installative in cui lo spazio fa la differenza e per un comfort senza compromessi. Residence In si distingue per compattezza, flessibilità applicativa e ampia disponibilità di accessori che garantiscono la compatibilità e retrocompatibilità anche nei box Riello più piccoli.  Lo scambiatore primario, interamente realizzato in acciaio inox e con accessibilità frontale alla camera di combustione, e lo scambiatore a piastre ottimizzato assicurano la massima efficienza e affidabilità nel tempo e garantiscono un comfort elevato, sia in riscaldamento che in sanitario Con RESIDENCE IN, Riello continua il percorso di rinnovamento della propria offerta murale in chiave eco-compatibile. L’ampio range di modulazione 1 : 8, le bassissime emissioni di NOx, che posizionano la gamma in Classe 6 (la migliore secondo gli standard europei), e la predisposizione per il funzionamento con miscele di gas naturale e idrogeno – fino a un massimo del 20% - sono solo alcune tra le caratteristiche che qualificano RESIDENCE IN come la caldaia ideale per un’installazione di valore nel tempo, dal minimo impatto ambientale ed estetico. Installazione universale Massima flessibilità installativa sia all’interno, all’esterno (in luogo parzialmente protetto) e a incasso in box Stabilità di acqua calda sanitaria Acqua calda senza oscillazioni di temperatura, per un comfort ottimale durante i prelievi Interfaccia digitale  Interfaccia dal design moderno, che si distingue per l’intuitività di utilizzo, comunicando con l’utente per mezzo di icone e testi scorrevoli. Basse emissioni La migliore in termini di rispetto ambientale a livello europeo Compattezza e flessibilità per un'installabilità universale RESIDENCE IN è la soluzione ideale per la sostituzione, oltre che per la nuova edilizia. Le dimensioni ridotte del prodotto, unitamente alla disponibilità di una gamma articolata di kit accessori per ogni tipo di applicazione, facilitano e velocizzano l’installazione, anche in piccoli box pre-esistenti. RESIDENCE IN, come suggerisce il nome, è la nuova caldaia Riello pensata in primis per l’installazione a incasso in box. Grazie alle ridotte dimensioni e alla disponibilità di una gamma dedicata di kit accessori, RESIDENCE IN è compatibile e retrocompatibile con le varie tipologie di box Riello. La nuova soluzione Riello, in caso di sostituzione di un modello a incasso, assicura all’utente un notevole risparmio, evitandogli sia l’acquisto di un nuovo box, che eventuali spese murarie per adeguare lo spazio della nicchia. Inoltre, gli attacchi idraulici con sequenza Riello rendono la sostituzione con le vecchie caldaie ancor più facile e immediata. L’installabilità a incasso è un plus anche per la nuova edilizia, permettendo di risparmiare spazio sempre più prezioso all’interno dell’abitazione e riducendo al minimo l’impatto estetico in facciata. Adatta per l'esterno RESIDENCE IN, grazie al grado di protezione IPX5D e al kit accessorio antigelo fino a -15°C, può essere installata anche all’esterno dell’abitazione, in luogo parzialmente protetto. Design moderno e utilizzo intuitivo RESIDENCE IN è dotata di un pannello di controllo dalle linee razionali e moderne, che si distingue per la semplicità di utilizzo. Attraverso il display LCD retroilluminato, che comunica con l’utente mediante icone e testi scorrevoli, è possibile accedere facilmente a tutte le funzioni di RESIDENCE IN. Un cuore d'acciaio per la massima efficienza RESIDENCE IN è dotata di un nuovo scambiatore primario in acciaio INOX, con tubo liscio ad elevata sezione, in grado di assicurare la migliore efficienza e pulizia nel tempo. L’acciaio INOX, oltre all’elevata resistenza all’azione corrosiva della condensa acida, previene la formazione interna di ossidi e di altri fenomeni elettrochimici tipici delle installazioni in vecchi impianti. La geometria a spira unica avvolta (circuito idraulico in serie) assicura una portata costante in tutte le sezioni dello scambiatore e previene intrinsecamente fenomeni di intasamento. L’accesso frontale agevola le operazioni periodiche di manutenzione e pulizia della camera di combustione. Comfort sanitario elevato Grazie al nuovo scambiatore a piastre high performance, RESIDENCE IN offre un elevato comfort in sanitario, con disponibilità di acqua calda in tempi brevi e un’ottima stabilità della temperatura di erogazione. Funzionamento silenzioso RESIDENCE IN, distinguendosi per la silenziosità operativa, rappresenta la scelta ottimale anche per l’installazione in locali non tecnici, ad esempio in caso di sostituzione in una cucina. Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less