UNICAL KON M C28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power in condensing 28.9 Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C) 15.8 kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) : 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Domestic hot water specific flow rate (Dt 30 °C) ''D'' 13.0 DHW production in cont. Dt 25 K (mixed) -/15.5 IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345 mm; 36.5kg KONm KONm the latest generation of domestic condensing boilers by Unical, available in the version: combined instantaneous heating only that can be combined with the DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE AND IS ADJUSTABLE TO LPG. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Pro VMW 286 Methane model with Wi-Fi: 0020256401 Energy Class in Heating: A Energy Class in Sanitary: A Heating power: 6.2 - 24.0 kW Sanitary power: 6.2 - 28.0 kW Withdrawal flow rate (ΔT = 30K) : 13.4 l/min DHW temperature adjustment: 35° - 65° C Possible diameter of burnt gas outlets: 60/100 mm; 80/125; 80/80; 60/60mm Gas Pipe Diameter: 12.70 mm (1/2") Hydraulic Pipe Diameter : G3/4" Dimensions (HxWxD): 720x440x338 mm Warranty program 7 All Vaillant condensing boilers are included in the Guarantee Program 7. By purchasing a Vaillant condensing boiler you can extend the guarantee from 2 to 7 years and benefit from exclusive advantages: No fixed call fee Free labor Free original spare parts VMW EcoTEC Pro boiler All models in the VMW ecoTEC pro range feature etas = 94% efficiency. For this reason, if combined with a class VI thermoregulation (such as vSmart), they reach a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler (heating and DHW production) is available in 23kW and 28 kW power ratings. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing considerable savings throughout the year. Its simplicity of adjustment makes it the ideal boiler for all users, as well as having an extremely simple interface with plain text and backlit display for ease of use ecoTEC pro is the ideal boiler for Vaillant on Vaillant replacements: installation is simple and quick, as is adjustment of the operating parameters. The ecoTEC pro range includes: the combined version, the smart connectivity version in combination with vSMART, a version designed for installation in multiple collective flues and two versions for installations in single collective flues. ecoTEC pro CM is also the right choice for boiler replacement in multi-family houses or for more complicated installations. Vaillant in fact provides a range of products suitable for the flue as well as multiple options as regards the accessories dedicated to the boiler: a flue pressure switch, combined with the electronics, self-adjusts the value to be set for the length of the vertical ducting so as to correctly evacuate the exhaust fumes. The ecoTEC pro CS models are equipped with a dedicated kit, included in the supply, consisting of a smoke non-return valve, 87° bend and 80/125mm rigid section for connection to a single collective flue Small size The small size of ecoTEC pro VMW allows it to be installed in any environment: ✔ 70cm height ✔ 44cm wide ✔ 35cm depth (identical to the previous version) Available with additional approval for outdoor installations down to -5°C Control the heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing ecoTEC plus to be controlled and adjusted at any time, from anywhere, quickly and intuitively. Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Characteristics Solution for heating and domestic hot water Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE BAXI AREA ASSISTANCE IN ADVANCE Baxi Luna Duo-tec E 28 Low NOx condensing boiler complete with standard Baxi maGO LPG flue exhaust kit Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input 28.9 kW Nominal heating flow rate 24.7 kW Sanitary nominal thermal power 28 kW Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -5°C Expansion vessel capacity 8 Degree of protection IPX5D Dimensions (hxwxd) mm 763 x 450 x 345 Power supply: LPG Luna Duo-tec General characteristics New modern and elegant design for the whole range Wide modulation range up to 1:7 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - for mod. 24 kW total length 40 meters (intake + exhaust) hydraulic system Electric three-way diverter valve (also heating only models) Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense as well in sanitary operation Modulating fan with electronic variation of speed Automatic by-pass High efficiency circulation pump full modulation Pump anti-blocking system and three-way valve which occurs every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Standard climate control (with external probe optionally available) Preparation for connection to a zone system Control system safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch that blocks the gas in case of lack of water NTC safety probe against smoke overtemperatures Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 24/28 AS/1-1 Article code : 0010026088 Power supply: LPG Performance Heating power : 6.9 ~ 23.9 kW Nominal heat input in DHW : 6.9 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 108.2% Domestic hot water production (ΔT = 30K): 13.4 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE JUNKERS BOSCH CERAPUR BUILT-IN CONDENSING BOILER ZWB 28-1 EI 24 kW INCLUDING FUME KIT - NEW ErP ErP energy class (Heating and DHW) For heating and domestic hot water production DHW nominal heat input kW 28 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat input (sanitary): 7.4 kW Sanitary flow rate ΔT = 30 K: 13.4 l/min NOx class: 5 Voltage v(AC): 230 HZ frequency: 50 Absorbed electric power: 230 W IP Protection Degree: X5D Dimensions: 243 x 533 x 775; 47 kgs Standard: Controllable from home - Management of the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. CerapurRecessed CERAPUR INCASSO is designed for concealed installations and encloses maximum comfort in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. In fact, CERAPUR INCASSO integrates perfectly into the façade thanks also to the possibility of painting the "shell" with the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in the niche in the wall Controllable from inside the house - Management of the boiler directly from inside the house, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the aluminum alloy construction of the primary exchanger Electrical insulation - The boiler has an IPX5D degree of electrical insulation Characteristics: Wall-mounted condensing boilers for outdoor use with DHW production that can be combined with solar thermal systems for DHW using the Solar Kit. C13, C33, C63, C83, B33 type certifications obtained. Suitable for use with Ø 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a special niche, dedicated to the built-in Guscio (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the DHW and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW and heating). Patented high efficiency silicon-aluminum alloy primary heat exchanger. Oversized sanitary plate heat exchanger for condensing also in DHW. Heating side expansion vessel of 6 litres. Circulator in Energy Class A. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RINNAI condensing boiler ZEN 29 kW Low NOx Integrated Wi-Fi Integrated Condensate Neutralizer cod. REB-KBI2929FF-LPG LPG Complete with Smoke Kit Code REB-KBI2929FF-NG Heating energy efficiency class A Profile / Domestic hot water energy class XL / A Noise level indoors (dB) 44 Performance Nominal heat input on PCI Heating (kW) 29.0 Qnw Nominal heat input on Sanitary PCI (kW) 29.0 NOx class 6 Maximum electric power absorbed in heating (W) 100 Degree of protection IPX5D Expansion vessel content (l) 7.5 Domestic hot water delivery (∆T=35°C) (l/min) 11.6 Dimensions Dimensions (W x H x D) (mm) - Empty weight (kg) 440x660x285 - 33 ZEN Zen is the new 100% Rinnai domestic condensing boiler , with WiFi chronothermostat as standard. Thanks to the "My Rinnai" APP, using and monitoring the generator is very simple: just one click to set the temperature, check consumption and change the programming for unexpected changes in plans, such as a last-minute evening with friends. Performing on any type of system, range rated and full condensing, Zen is the perfect Rinnai solution for domestic comfort. Small in size and big in performance, Zen is easy to install and guarantees a low environmental impact. The heart of the boiler has extraordinary performances The metal fiber burner is ultra low NOx, with values ​​that satisfy the most restrictive European regulations: Zen reaches the best class of merit (Class 6) for its low environmental impact and is positioned as the most eco-sustainable product in its category. The 100% Rinnai heat exchanger is made of stainless steel, completely recyclable, designed to ensure complete condensation and last over time. Innovative earthquake safety sensor In the event of medium or high intensity seismic events (increasingly frequent also in our country) the boiler automatically isolates itself from the gas system, limiting the risk of leaks, explosions or fires, which can make the affected environment even more dangerous. earthquake. Can also be installed outdoors Zen is IPX5D certified and features the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection. Integrated condensate neutraliser The Zen series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutraliser, in fact, allows the acidity of the condensate to be eliminated (water with an acid pH produced by the normal operation of the boiler, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory which performs this function. otherwise essential. Integrated climatic probe The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adjusting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Wi-Fi as standard Zen offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Fondital ITACA KC 28 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - LPG Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 26.4 kW Rated heat output: 27.9 kW Efficiency at maximum power: 96.4% Efficiency at 30% load: 107.0% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 15.5 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion tank capacity: 10 l Consumption in heating at nominal power Natural gas m3 /h 2.79 DHW consumption at nominal power Natural gas m3 /h 3.22 Total absorbed electrical power: 91 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 39kg LPG power supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with room temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion tank Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER CAN OPERATE WITH METHANE. LPG AND PROPANE AIR WITHOUT THE USE OF ADDITIONAL CONVERSION KITS. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ferroli Bluehelix Maxima 28C condensing boiler complete with Wi-Fi flue gas exhaust kit Optional Class A Methane or LPG - NEW 0TSB4MWA Energy label specifications according to the European ErP directive Heating energy efficiency Class A+ (in combination with the connect command) Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Max heating heat input (Hs) kW 24.5 Max DHW heat input (Hi) kW 28.5 Yield 30% % 109.7 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 8 litres Sanitary flow rate ∆t 25°C l/min 16.1 IP X4D protection degree Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 Methane or LPG MGR: Methane, LPG, Propane air Ready. The boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Bluehelix Maxima - Functionality at its maximum expression The exclusive lines of BLUEHELIX MAXIMA radically innovate the aesthetic concept proposed so far through the use of crystal and the revolutionary use of curved shapes. A multicolored LED environment , set in a central position, allows you to perceive the status and operating modes of the boiler even on a visual chromatic level. The large 7'' full color touch screen display integrated in the front surface of black tempered glass allows the user to interact in a totally smart way with the product thanks also to the combination with the smart CONNECT remote control manageable from iOS and Android apps . Conceived to fully satisfy the requests for a "robust" product from every point of view: primary heat exchanger with high passages, secondary domestic heat exchanger enhanced with 20 plates, high head circulator, new control electronics. All these elements are designed to ensure maximum efficiency and reliability over time also, and not only, to replace old generators in particularly dirty systems: ideal for "carefree" replacement MAXIMUM SILENCE: ONLY 45 dB The particularly careful design of BLUEHELIX MAXIMA has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers MAXIMUM INNOVATION Developing sustainable and low environmental impact solutions capable of combating global warming is now a reality! BLUEHELIX MAXIMA is already capable of autonomously self-regulating (plug-in) and functioning correctly in total safety with mixtures of natural gas enriched with hydrogen already foreseen for distribution in Europe (*) THE BOILER CONTROL The innovative control and management electronics of BLUEHELIX MAXIMA is at the top levels of the category. The large 7'' full touch screen color graphic display allows real-time viewing of operating information thanks to simple and intuitive graphic screens. With a simple touch it is possible to set the temperature set points for heating and domestic hot water. Thanks to the contextual help, BLUEHELIX MAXIMA directly informs the user of the possible causes of the anomaly while providing the qualified technician with indications on possible solutions to undertake. Even the system pressure is no longer a problem because thanks to the semi-automatic system electroloading function, a simple ''touch'' is enough and the boiler automatically restores the adequate pressure without requiring manual intervention by the user. CONNECT The remote control Remote control supplied with the class A+ kit code for home comfort management also from Smartphone (*) Connection to the home WiFi network for internet access via the supplied RF/WiFi receiver CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the flow temperature using the functions Environmental Climatic Compensation (CCA) and Compensation External Climatic (CCE) via external temperature detectable directly from the internet (or from an optional external probe) It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30-minute intervals via APP CONNECT Alarm display also via APP CONNECT Operating modes: Off, Holiday, Automatic, Manual Three modifiable temperature levels: Comfort, Economy, Antifreeze TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) The geometry of the BLUEHELIX MAXIMA THERMOBALANCE™ thermal unit exchanger (figure A) allows operation at almost maximum design efficiency even in conditions of partial clogging, while with the same amount of deposits and sediments (e.g. due to the installation action on old systems) the traditional exchanger in figure B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits* is formed which hinder the heat exchange and reduce the efficiency below the nominal values. THE ENHANCED HYDRAULIC UNIT All models in the BLUEHELIX MAXIMA series are equipped with a 20-plate DHW plate heat exchanger and a 7.5 mWC head boosted heating circulator The considerable increase in the passage section of the 20-plate exchanger compared to a traditional one (e.g. with 14 plates) greatly reduces clogging over time, even in the presence of particularly hard water, greatly increasing its average life and reducing maintenance costs to a minimum. The enhanced system circulation pump with a head of 7.5 meters allows all BLUEHELIX MAXIMA models to function correctly, delivering all the necessary power even in systems with high pressure drops (particularly large new systems or old systems with ). MC2 : MULTI COMBUSTION CONTROL The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2: Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Furthermore, the new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34C model. In this way BLUEHELIX MAXIMA is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off operations which increase operating costs and reduce the average life of the product. CHARACTERISTICS Aesthetics with exclusive lines (Patent) that radically innovate the design concept through the use of tempered glass and curved shapes Wide range of optional accessories: CONNECT wi-fi remote control kit manageable via App, hydraulic connection kits (5 pipes, 4 taps), connection cover Boiler with thick stainless steel primary exchanger, with increased passages to guarantee durability and reduced maintenance Enhanced modulating heating circulator with high head on all models able to adapt even to particularly resistant systems Semi-automatic system electroloading as standard Enhanced domestic hot water exchanger with a high number of plates particularly immune to blockages and capable of maintaining the domestic hot water production capacity constant over time thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology for better adaptability of use to varying gas network conditions 7 inch color graphic touch screen display Immediate display of the operating status thanks to the front multicolor LED Particularly suitable for operation in flues that require "heavy" ducting, thanks to operation with 50 mm diameter smoke outlets Designed to simplify and facilitate normal maintenance and cleaning operations thanks to easy access to internal components Simplified electrical wiring that does not require removal of the boiler shell thanks to direct access to the external connection terminal block available on the bottom of the product Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Fondital Formentera KC 28 condensing boiler complete with Low NOx LPG fume exhaust kit Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 26.4 kW Rated heat output: 27.9 kW Efficiency at maximum power: 96.4% Efficiency at 30% load: 105.5% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 15.5 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion tank capacity: 10 l DHW consumption at nominal power Natural gas m3 /h 2.79 Total absorbed electrical power: 91 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 750x420x315 mm; 39kg LPG power supply Warranty: 2 years FORMENTERA Formentera KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler, unlike the storage ones, allows instantaneous production of domestic hot water and uses condensing technology which allows a reduction in consumption, high efficiency and low emissions of pollutants. PLUS Modulation ratio 1:9 Touch screen user interface Standard management of 2 types of solar thermal system Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates TECHNICAL FEATURES Heat exchanger in thermopolymers and stainless steel Total premix burner Modulating gas valve with constant air/gas ratio Variable speed combustion fan 3-speed circulator with built-in deaerator 10 liter heating expansion vessel Motorized diverter valve Installation flexibility thanks to the IPX5D electrical protection degree Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Availability of the boiler change kit as an accessory Efficiency classification according to 92/42/EEC: ★★★★ NOx emission class (EN 297): 5 Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER GAS BOILER IMMERGAS VICTRIX 28 KW TT METHANE CONDENSATION Immergas Victrix 28 KW TT condensing boiler Capacity: 28Kw Useful heating power kW : 24.0 DHW useful power kW: 28.0 Type: snapshot Modulation range: 11 - 100 % Hot water production (∆t 30 °C) l/min: 13.4 Electrical protection degree IPX: 5D Power supply: methane VICTRIX TT The VICTRIX TT ErP range, intended for new installations and above all for the replacement of existing appliances, has been designed to comply with the new European Directives on the use of energy, increasingly oriented towards condensing technology to more easily reach the efficiency classes high in space heating and in the production of domestic hot water in homes. VICTRIX TT ErP, produced in the new highly automated lines of the company's historic headquarters in Brescello, incorporates the innovative condensing module which guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater corrosion resistance thanks to the special alloy with which it is made. Reduced consumption thanks to the class A circulator and boiler power modulation up to 15%: ideal condition for mid-seasons or reduced loads. In addition to a very low environmental impact, the boiler features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display for viewing operating temperatures, operating status and error codes. HIGH HYDRAULIC PERFORMANCE The condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion. The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15). CLASS A CIRCULATOR The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, it can be set in Auto or Fixed operating modes. WIDE MODULATION RANGE The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the appliance (from 15% to 100% of the thermal power) determines high seasonal yields. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EVOLVED DESIGN The VICTRIX TT ErP range is designed to make the work of professionals easier. Immergas has invested significant resources in the industrialization of the parts of the appliance, making it particularly robust and has paid the utmost attention to details and finishes. VICTRIX TT ErP presents new technical features such as: • safety valve drain conveyed to the condensate drain • removable cover for direct access to the electrical connection compartment • cover casing for the water connections to better position the boiler in domestic spaces DIRECT ACCESSIBILITY TO THE ELECTRICAL CONNECTIONS COMPARTMENT In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main devices that can be combined (for example CARV2, external probe, CRONO 7). ELECTRONIC AIR/GAS CONTROL The electronic gas valve allows air/gas control by means of a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows VICTRIX TT ErP to be powered with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase and provides only for the supply of spare parts.

Read more less

UNICAL KON M C28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power in condensing 28.9 Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C) 15.8 kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) : 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Domestic hot water specific flow rate (Dt 30 °C) ''D'' 13.0 DHW production in cont. Dt 25 K (mixed) -/15.5 IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 36.5kg KONm KONm the latest generation of domestic condensing boilers by Unical, available in the version: combined instantaneous heating only that can be combined with the DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to guarantee high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance NB: PRODUCT AVAILABLE ON ORDER Ferroli Bluehelix TOP RRT K 50 28C Methane or LPG condensing boiler Complete with Smoke Exhaust Kit cod. 0T3T2AWA - NEW Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max / min heat input (Hs) kW 27.2 / 5.6 Heating power max / min heating (80/60°C) kW 24 / 4,9 Max DHW heat input (Hi) kW 28.5 Min DHW heat input (Hi) kW 5.0 Max / min DHW thermal power kW 28.0 / 5.0 NOx emission class (EN 15502-1) - 6 Max working pressure heating bar 3 Sanitary flow rate ∆t 30°C l/10min 161 Protection degree (IEC 60529) IP X5D Supply voltage V/Hz 230V / 50Hz BLUEHELIX TOP RRT K 50 BLUEHELIX TOP RRT K 50... THE EVOLUTION IS COMPLETE This range of generators is equipped with the tested primary heat exchanger in stainless steel and a 50-litre domestic hot water storage tank, also in stainless steel. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TOP RRT K 50 is at the top of its category. BLUEHELIX TOP RRT K 50 achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% (Class A ErP, scale from G to A++). Furthermore, when combined with the external probe and the Romeo remote timer control or the new Connect control, it reaches system energy class A+ (scale from G to A+++). TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) The THERMOBALANCE™ heat exchanger of BLUEHELIX TOP RRT K 50 (fig. A) compared to the more classic and widespread steel exchanger (fig. B), abandoned in favor of the evolution towards the primary steel exchanger used in the models Bluehelix (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values. INNOVATIVE THERMAL GROUP FERROLI THERMOBALANCE TM IN ITS 5 ELEMENTS Ferroli has oriented the design of the combustion cell and the exchanger of BLUEHELIX TOP RRT K 50 in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit (more common) in which if only one of the circuits is blocked, chemical washing is much more laborious. THE ENGINE The tube that makes up the BLUEHELIX TOP RRT K 50 exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. TOP QUIETNESS The particularly careful design of BLUEHELIX TOP RRT K 50 has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. . Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. THE BOILER CONTROL The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs. The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems. MC2 The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2: Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic board can be easily rotated on the chassis leaving free access to the internal parts. The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections SIMPLIFIED REPLACEMENT The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. STOP AND GO FUNCTION With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these "false starts" can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TOP RRT K 50 provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water SUN EASY FUNCTION BLUEHELIX TOP RRT K 50 has been designed to be easily inserted into systems built with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user SANITARY ECO-COMFORT FUNCTION In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. Achieving maximum comfort certified 3 stars (EN 13203). The efficiency and the load profiles according to the ErP directive are at the top of the category: mod. 28 / A - XL | mod. 34/A - XXL MODULATION RANGE The new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34 K 50 model (1:10 for the 28 K 50). In this way BLUEHELIX TOP RRT K 50 is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off type operations which increase operating costs and reduce the average life of the product. PRODUCT ADVANTAGES Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt A+ : combined with the modulating remote control and the external probe (optional) it reaches the higher efficiency class A+ (scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34, 1:10 mod. 28) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) > MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace. Domestic hot water production with 50 liter stainless steel storage tank Arrangement for recirculation connections (present in the accessory: connection connection kit) Hydraulic connections covered by the boiler shell > Standard by-pass Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Anti-legionella function with programmable timing Timed anti-blocking for circulator and three-way valve 3-star certified comfort in sanitary manufacturing according to EN 13203 Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Free methane/LPG/propaneted air transformation during the initial product check and activation of the conventional guarantee, to be requested from the Authorized Assistance Center Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less