IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. FIRST START-UP FREE! Technical features Indoor unit code: AE260RNWSEG/EU ( 260 liter boiler ) Outdoor unit code : AE060RXEDEG/EU Premium Wired Controller MWR-WW10N Included Indoor unit Rated power : 0.2 kW Nominal absorption: 0.9 kW Volume : 260 litres Water Flow : 7 ~ 48 l/min Water pressure : 3 bars Flow Switch Flow Limits : 5 ~ 60 l/min Safety valve pressure : 7 bar Expansion vessel volume: 8 litres Sound power : 26 dB(A) Sound pressure : 40dB(A) Pump type : UPMM 25-9.5 Delivery temperature : - Cooling : 5° ~ 25° C - Heating : 15° ~ 65° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 15.88 mm (3/8") Heating pipes diameter: 28 mm Diameter of DHW pipes : 22 mm Dimensions and weight Internal unit dimensions (WxHxD): 595x1800x700 mm Indoor unit weight: 146.0 Kg Outdoor Unit Energy efficiency SEER: 4.73 SCOP: 4.58 ClimateHub Energy Efficiency Class: A++/A+ Hydronic Module Energy Efficiency Class: A+++/A++ Performance Cooling Capacity: 6.0 kW Heating Capacity: 6.5 kW Cooling absorption: 1.47 kW Heating absorption: 1.47 kW Sound Power Level : 60 ~ 62 dB(A) Sound pressure level : 47 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range : - Cooling : 10° ~ 46° C - Heating : -25° ~ 35° C DHW : -25° ~ 43° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 15.88 mm (5/8") Maximum piping length: 30 m Maximum difference in height indoor unit / outdoor unit: 20 m Dimensions and weight External unit dimensions (WxHxD): 880x638x310 mm Outdoor unit weight: 46.5 Kg Samsung Heat Pumps EHS Split System It is the split air-water solution consisting of an external condensing unit associated with a hydronic module, for the production of DHW and heating. Why choose the EHS Split system? A solution with high effi ciency and maximum fl exibility Perfect for every application requirement: the EHS SPLIT allows, through a separate water kit, to produce domestic hot water, underfloor heating/cooling and to supply low temperature radiators High performance even at low temperatures The EHS SPLIT system is equipped with an inverter compressor capable of delivering up to 90% of its nominal capacity even with an external temperature of -10°C. Operation is guaranteed with external temperatures down to -25°C. Concrete curing function When the unit is installed and the radiant panels installed, the concrete curing function can facilitate the curing of the concrete with delivery water temperatures that automatically adapt to this purpose. Silent function The silent function allows the noise of the external machine to be reduced in 4 progressive steps up to 35 dB, ideal for operation at night. The activation can be programmed through the Command panel. Only for 6 and 9 kWx EHS Split Emergency mode In the event of an interruption in the operation of the outdoor unit, the ClimateHub guarantees the production of domestic hot water and heating thanks to the included resistors Photovoltaic contact & Smart Grid It allows you to optimize the self-consumption of electricity produced by the photovoltaic panels. The contact is already set up on the hydronic modules and in the ClimateHub of the Samsung EHS systems. Components and Integrated Solutions The special water heater is a system that allows the production of domestic hot water using a heat pump by integrating a storage tank with a capacity of up to 300L. The domestic hot water storage has class C, with ABS coating. The 4-connection flywheel is 58L, with foaming treatment. The compact flywheel, on the other hand, is 35 L insulated in EPP material Full control via MWR-WW10N The adjustment control of the EHS R32 system allows simplified and intuitive management of all settings Estimate of consumption: The user can view directly on the control how much energy is consumed and produced by the system Double climatic curve: Once the climatic curve has been set, the delivery temperature to the system is automatically adjusted according to the external temperature, adapting the heat input to the heating needs of the building. Thus, the best performance in terms of comfort is guaranteed by keeping the room temperature constant; moreover, thermal dispersions and energy waste are reduced Multi-zone management: Using the command, it is possible to create and manage two zones with different delivery temperatures The components Samsung EHS ClimateHub R32 is the integrated indoor system that allows heating, cooling and domestic hot water production in association with heat pump outdoor units of the EHS Split and Mono R32 series. The ClimateHub system includes all the main hydraulic components inside: in this way it is possible to save useful space inside the home Attacks Placed in the upper part for a simplifi ed installation. The 260-litre ClimateHubs are set up for recirculation of the DHW circuit Exchanger High efficiency exchanger with brazed plates Backup resistor 2 kW or 6 kW Circulation pump Included with PWM inverter control, 25LPM/7mAq Electronic flowmeter Allows, in combination with the MWR-WW10N wired control, an estimation of consumption 8 liter expansion vessel Contact Photovoltaic & Smart Grid Legionella resistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Indoor Unit Catalog Code : AHM-060HCDSAA Outdoor Unit Catalog Code: AHW-060HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.85 SCOP: 3.33 Energy efficiency class: A+++/A++ Performance Nominal capacity in heating : 6.0 ~ 8.0 kW Rated capacity in cooling : 6.3 ~ 7.6 kW Water flow rate : 0.60 ~ 1.53 m 3 /h Indoor unit sound pressure : 28 dB(A) Outdoor Unit Sound Pressure : 47 ~ 48 dB(A) Indoor unit sound power : 42 dB(A) Outdoor unit sound power : 62 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Liquid piping diameter : 6.35 mm (1/4") Gas pipe diameter: 12.70 (1/2") Maximum piping length: 40 m Maximum difference in height indoor unit / outdoor unit: 30 m Dimensions and weight Internal unit dimensions (HxWxD): 890x520x320 mm Weight of outdoor unit: 43.5 Kg External unit dimensions (HxWxD): 750x900x340 mm Outdoor unit weight: 49.5 Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion tank Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Hi-Therma indoor unit Hi-Therma Split is an air-water heat pump system with separate hydronic module, connected to the outdoor unit via refrigerant pipes and housed inside the building, therefore protected from atmospheric agents and any water freezing phenomena in the harsher periods. This internal module is equipped with a heat exchanger, water circulator, expansion vessel and all the main functional and safety hydraulic components Elegant appearance Compact and functional design Integrated control Intuitive control interfaces Easy installation Facilitated maintenance The position of the components in the indoor unit has been completely optimised. The electrical panel can be rotated 88° facilitating maintenance of the rear parts. Furthermore, the control on the machine can be easily extracted from the front panel and, thanks to a special anchoring system, hung on the electrical box to further facilitate maintenance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. FIRST START-UP FREE! Technical features Indoor unit code: AE260RNWSEG/EU ( 260 liter boiler ) Outdoor unit code : AE090RXEDEG/EU Premium Wired Controller MWR-WW10N Included Indoor unit Rated power : 0.2 kW Nominal absorption: 0.9 kW Volume : 260 litres Water Flow : 7 ~ 48 l/min Water pressure : 3 bars Flow Switch Flow Limits : 5 ~ 60 l/min Safety valve pressure : 7 bar Expansion vessel volume: 8 litres Sound power : 26 dB(A) Sound pressure : 40dB(A) Pump type : UPMM 25-9.5 Delivery temperature : - Cooling : 5° ~ 25° C - Heating : 15° ~ 65° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 15.88 mm (3/8") Heating pipes diameter: 28 mm Diameter of DHW pipes : 22 mm Dimensions and weight Internal unit dimensions (WxHxD): 595x1800x700 mm Indoor unit weight: 146.0 Kg Outdoor Unit Energy efficiency SEER: 5.09 SCOP: 4.59 ClimateHub Energy Efficiency Class: A++/A+ Hydronic Module Energy Efficiency Class: A+++/A++ Performance Cooling Capacity: 9.0 kW Heating Capacity: 8.7 kW Cooling absorption: 1.87 kW Heating absorption: 2.11 kW Sound Power Level : 63 ~ 64 dB(A) Sound pressure level : 49 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range : - Cooling : 10° ~ 46° C - Heating : -25° ~ 35° C DHW : -25° ~ 43° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 15.88 mm (5/8") Maximum piping length: 30 m Maximum difference in height indoor unit / outdoor unit: 20 m Dimensions and weight External unit dimensions (WxHxD): 940x998x330 mm Outdoor unit weight: 73.0 Kg Samsung Heat Pumps EHS Split System It is the split air-water solution consisting of an external condensing unit associated with a hydronic module, for the production of DHW and heating. Why choose the EHS Split system? A solution with high effi ciency and maximum fl exibility Perfect for every application requirement: the EHS SPLIT allows, through a separate water kit, to produce domestic hot water, underfloor heating/cooling and to supply low temperature radiators High performance even at low temperatures The EHS SPLIT system is equipped with an inverter compressor capable of delivering up to 90% of its nominal capacity even with an external temperature of -10°C. Operation is guaranteed with external temperatures down to -25°C. Concrete curing function When the unit is installed and the radiant panels installed, the concrete curing function can facilitate the curing of the concrete with delivery water temperatures that automatically adapt to this purpose. Silent function The silent function allows the noise of the external machine to be reduced in 4 progressive steps up to 35 dB, ideal for operation at night. The activation can be programmed through the Command panel. Only for 6 and 9 kWx EHS Split Emergency mode In the event of an interruption in the operation of the outdoor unit, the ClimateHub guarantees the production of domestic hot water and heating thanks to the included resistors Photovoltaic contact & Smart Grid It allows you to optimize the self-consumption of electricity produced by the photovoltaic panels. The contact is already set up on the hydronic modules and in the ClimateHub of the Samsung EHS systems. Components and Integrated Solutions The special water heater is a system that allows the production of domestic hot water using a heat pump by integrating a storage tank with a capacity of up to 300L. The domestic hot water storage has class C, with ABS coating. The 4-connection flywheel is 58L, with foaming treatment. The compact flywheel, on the other hand, is 35 L insulated in EPP material Full control via MWR-WW10N The adjustment control of the EHS R32 system allows simplified and intuitive management of all settings Estimate of consumption: The user can view directly on the control how much energy is consumed and produced by the system Double climatic curve: Once the climatic curve has been set, the delivery temperature to the system is automatically adjusted according to the external temperature, adapting the heat input to the heating needs of the building. Thus, the best performance in terms of comfort is guaranteed by keeping the room temperature constant; moreover, thermal dispersions and energy waste are reduced Multi-zone management: Using the command, it is possible to create and manage two zones with different delivery temperatures The components Samsung EHS ClimateHub R32 is the integrated indoor system that allows heating, cooling and domestic hot water production in association with heat pump outdoor units of the EHS Split and Mono R32 series. The ClimateHub system includes all the main hydraulic components inside: in this way it is possible to save useful space inside the home Attacks Placed in the upper part for a simplifi ed installation. The 260-litre ClimateHubs are set up for recirculation of the DHW circuit Exchanger High efficiency exchanger with brazed plates Backup resistor 2 kW or 6 kW Circulation pump Included with PWM inverter control, 25LPM/7mAq Electronic flowmeter Allows, in combination with the MWR-WW10N wired control, an estimation of consumption 8 liter expansion tank Contact Photovoltaic & Smart Grid Legionella resistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Indoor unit catalog code : AHW-140UCSEP Outdoor Unit Catalog Code : AHM-160UXCSAPA3 Command Included Optional commands Temperature sensor : HTS-E1000A Energy efficiency SCOP : 4.40 Energy efficiency class: A+++ Performance Nominal heating capacity: 16.0 kW Nominal capacity in cooling : 1.2.5 kW Indoor unit sound pressure : 33 dB(A) Outdoor unit sound pressure : 51~ 52 dB(A) Indoor unit sound power : 46 dB(A) Outdoor unit sound power : 65 ~ 66 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Operating range - Cooling: 10° ~ 43° Cbs - Heating: -20° ~ 35° Cbs - DHW : -20° ~ 43° Cbs Installation data Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum piping length: 35 m Maximum difference in height indoor unit / outdoor unit: 20 m Dimensions and weight Internal unit dimensions (HxWxD): 890x520x320 mm Outdoor unit weight: 58 Kg External unit dimensions (HxWxD): 1380x950x370 mm Outdoor unit weight: 111.5 Kg Hisense Hi-AquaSmart heat pump High efficiency 3-in-1 solution The Hi-Aquasmart air-water heat pump system is able to capture free energy from the atmosphere and, in the face of limited electricity consumption, to use this heat in a useful way for heating and hot water production healthcare. By inverting the refrigeration cycle during the summer season it also allows you to air-condition the internal environments. In addition to allowing considerable energy savings, compared to traditional combustion boilers, thanks to the particular steam injection compressor it allows to keep the thermal capacity unchanged as the external temperature decreases. These peculiarities make Hi-AquaSmart particularly effective even in renovations and in places with a very harsh climate. Steam Injection Technology Hi-Aquasmart adopts a vapor injection scroll compressor, featuring a higher compression ratio, better lubrication and lower noise level than normal compressors. The vapor injection system (EVI) and the stepless inverter regulation technique considerably improve the effectiveness of the refrigeration cycle and allows the thermal capacity to be kept practically constant even in the most demanding working conditions Unchanged capacity at low outside temperatures Hi-Aquasmart can keep the heating capacity practically unchanged even at low ambient temperatures without the need for electric heaters or supplementary heat sources. For example the 14 kW model maintains the same nominal capacity up to -15°C the 16 kW model up to -10°C High efficiency DC circulator The Hi-Aquasmart series is equipped with a DC pump (inverter) which allows energy consumption for water circulation to be reduced to a minimum Different operating modes Different modes of operation are available to customize and meet user's needs Seven day timer Vacation setting mode OTC control mode DHW priority mode Management cost reduction Compared to other traditional heating methods such as electric, oil or gas boilers, the heat pump system is much more efficient and consequently allows significant savings on the energy bill Reduction of CO 2 emissions The heat pump allows you to significantly reduce CO2 emissions because by exploiting free energy from the air it reduces the equivalent primary energy requirement 66% cheaper than electric heaters 50% less than oil boilers 30% cheaper than gas boilers General system configuration In addition to guaranteeing high thermal performance even in harsh climates, Hi-Aquasmart can manage external energy sources such as a gas boiler and solar thermal, creating hybrid systems capable of guaranteeing maximum reliability in all conditions Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. FIRST START-UP FREE! Technical features Internal unit code: AE260RNWMEG/EU ( 260 liter boiler ) Outdoor unit code : AE120RXYDEG/EU Premium Wired Controller MWR-WW10N Included Indoor unit Rated power : 0.2 kW Nominal absorption: 0.9 kW Volume : 260 litres Water Flow : 7 ~ 48 l/min Water pressure : 3 bars Flow Switch Flow Limits : 5 ~ 60 l/min Safety valve pressure : 7 bar Expansion vessel volume: 8 litres Sound power : 26 dB(A) Sound pressure : 40dB(A) Pump type : UPMM 25-9.5 Delivery temperature : - Cooling : 5° ~ 25° C - Heating : 15° ~ 65° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 15.88 mm (3/8") Heating pipes diameter: 28 mm Diameter of DHW pipes : 22 mm Dimensions and weight Internal unit dimensions (WxHxD): 595x1800x700 mm Indoor unit weight: 146.0 Kg Outdoor Unit Energy efficiency SEER: 5.22 SCOP: 4.69 Performance Cooling Capacity: 12.0 kW Heating Capacity: 12.0 kW Sound Power Level : 64 ~ 65 dB(A) Sound pressure level : 50 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 940x1420x330 mm Outdoor unit weight: 110.0 Kg Samsung Heat Pumps EHS Split System It is the split air-water solution consisting of an external condensing unit associated with a hydronic module, for the production of DHW and heating. Why choose the EHS Split system? A solution with high effi ciency and maximum fl exibility Perfect for every application requirement: the EHS SPLIT allows, through a separate water kit, to produce domestic hot water, underfloor heating/cooling and to supply low temperature radiators High performance even at low temperatures The EHS SPLIT system is equipped with an inverter compressor capable of delivering up to 90% of its nominal capacity even with an external temperature of -10°C. Operation is guaranteed with external temperatures down to -25°C. Concrete curing function When the unit is installed and the radiant panels installed, the concrete curing function can facilitate the curing of the concrete with delivery water temperatures that automatically adapt to this purpose. Silent function The silent function allows the noise of the external machine to be reduced in 4 progressive steps up to 35 dB, ideal for operation at night. The activation can be programmed through the Command panel. Only for 6 and 9 kWx EHS Split Emergency mode In the event of an interruption in the operation of the outdoor unit, the ClimateHub guarantees the production of domestic hot water and heating thanks to the included resistors Photovoltaic contact & Smart Grid It allows you to optimize the self-consumption of electricity produced by the photovoltaic panels. The contact is already set up on the hydronic modules and in the ClimateHub of the Samsung EHS systems. Components and Integrated Solutions The special water heater is a system that allows the production of domestic hot water using a heat pump by integrating a storage tank with a capacity of up to 300L. The domestic hot water storage has class C, with ABS coating. The 4-connection flywheel is 58L, with foaming treatment. The compact flywheel, on the other hand, is 35 L insulated in EPP material Full control via MWR-WW10N The adjustment control of the EHS R32 system allows simplified and intuitive management of all settings Estimate of consumption: The user can view directly on the control how much energy is consumed and produced by the system Double climatic curve: Once the climatic curve has been set, the delivery temperature to the system is automatically adjusted according to the external temperature, adapting the heat input to the heating needs of the building. Thus, the best performance in terms of comfort is guaranteed by keeping the room temperature constant; moreover, thermal dispersions and energy waste are reduced Multi-zone management: Using the command, it is possible to create and manage two zones with different delivery temperatures The components Samsung EHS ClimateHub R32 is the integrated indoor system that allows heating, cooling and domestic hot water production in association with heat pump outdoor units of the EHS Split and Mono R32 series. The ClimateHub system includes all the main hydraulic components inside: in this way it is possible to save useful space inside the home Attacks Placed in the upper part for a simplifi ed installation. The 260-litre ClimateHubs are set up for recirculation of the DHW circuit Exchanger High efficiency exchanger with brazed plates Backup resistor 2 kW or 6 kW Circulation pump Included with PWM inverter control, 25LPM/7mAq Electronic flowmeter Allows, in combination with the MWR-WW10N wired control, an estimation of consumption 8 liter expansion tank Contact Photovoltaic & Smart Grid Legionella resistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM051MR U44 Energy efficiency EER: 4.7 SCOP: 4.46 Energy efficiency class in heating: A+++ Performance Cooling capacity : 5.5 kW Heating capacity: 5.5 kW Nominal flow rate : 948 l/h Sound power level : 57 dB(A) Sound pressure level : 35 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 80° C Installation data Inlet Pipe Diameter : 25.4 mm (1") Male Outlet piping diameter : 25.4 mm (1") Male Dimensions and weight External unit dimensions (WxHxD): 1239x834x330 mm Outdoor unit weight: 89.0 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. What is a heat pump? The LG THERMA V air-to-water heat pump provides heating, cooling and domestic hot water without using fossil fuels, providing 100% renewable energy for an efficient and comfortable home The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO 2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outdoor temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM123MR U34 Energy efficiency EER: 4.75 SCOP: 4.9 Energy efficiency class in heating: A+++ Performance Cooling capacity : 12.0 kW Heating capacity : 12.0 kW Nominal flow rate : 2070 l/h Sound power level : 60 dB(A) Sound pressure level : 38 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 80° C Installation data Inlet Pipe Diameter : 25.4 mm (1") Male Outlet piping diameter : 25.4 mm (1") Male Dimensions and weight External unit dimensions (WxHxD): 1239x1380x330 mm Outdoor unit weight: 118.6 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. What is a heat pump? The LG THERMA V air-to-water heat pump provides heating, cooling and domestic hot water without using fossil fuels, providing 100% renewable energy for an efficient and comfortable home The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO 2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outdoor temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : NXHM 004 Energy efficiency SEER : 4.99 SCOP: 4.85 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 4.50 kW Heating Capacity: 4.20 kW Cooling absorption: 0.82 kW Heating absorption: 0.82 kW Air flow : 2770 m 3 /h Sound power level : 55 dB(A) Sound pressure level : 45 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Dimensions and weight Dimensions (LxHxP): 1295x72x429 mm Empty weight: 98.0 kg Riello NXHM Inverter Monobloc Air-Water Hydronic Heat Pumps NXHM is an energy efficient residential hydronic heat pump for heating, cooling and eventual. domestic hot water production. The unit works with ecological refrigerant R32 ensuring not only a low global warming potential (GWP) and CO 2 emissions, but also a high energy efficiency throughout the working range. NXHM is also equipped with new exchange coils with the special Blue-Fin hydrophilic and anti-corrosion treatment, which improves the drainage of condensate on the fins, thus reducing the risk of freezing on the coil (maximum efficiency even in humid climates) NXHM is available in 10 different models with heating capacities from 4.2 to 15.9 kW Twin-Rotary compressor with DC inverter technology, which modulates the power required to adapt perfectly to the actual load required High COP and EER (all NXHM heat pumps comply with the highest required standards in terms of energy efficiency) Third party certified performance HP Keymark Can be connected to low temperature radiators, underfloor heating elements and fan coil type units Water heating temperature up to +65 °C - Quick and easy installation Low noise unit Wired control included, it can completely manage a heating/cooling/domestic hot water system The control can manage up to 6 units in cascade (1 master and 5 slaves) even with different powers Standard anti-freeze protection that protects the entire system and especially the hydraulic parts from potential frost damage. Structure Cover cabinet made of steel sheet painted with neutral RAL 7035 powders which increases its resistance to corrosion by atmospheric agents. All panels are removable Compressor A double compressor protection shield for sound isolation further reduces sound levels. An advanced technology, able to offer the maximum energy efficiency and characterized by a high power available in peak conditions, as well as an optimized efficiency at low and medium compressor speeds. The NXHM heat pump is equipped with DC inverter technology, which combines two electronic regulation logics: go modulation (PAM) and pulse width modulation (PWM), in order to guarantee optimized compressor operation in each operating condition, minimize temperature fluctuations, and provide perfect comfort regulation and, all while significantly reducing energy consumption WFP extension DC pulse width modulation drives the compressor to peak load conditions (startup and peak load), so that the voltage increases at a fixed frequency. The compressor runs at high speed, in order to quickly reach the desired temperature PWM DC Pulse Width Modulation controls the compressor in partial load conditions, adapting the frequency in the presence of a fixed voltage. The speed of the compressor is precisely regulated, and the system offers a high level of comfort (absence of temperature fluctuations) under operating conditions characterized by exceptional efficiency. The compressor frequency increases steadily until it reaches the maximum level. This guarantees the absence of intensity peaks during the start-up phase and, moreover, guarantees a safe connection to a single-phase power supply, even for high-power systems. This compressor start logic makes "Soft Start" starters useless and, moreover, guarantees the immediate availability of maximum power External battery The external coil is made with copper pipes and hydrophilic aluminum fins. This solution allows the water to migrate more easily (by gravity) towards the bottom of the exchanger. In particular, this innovation allows: lengthening of the time necessary for the formation of frost, reducing the accumulation of the latter on the coil a more efficient defrosting phase, thanks to the improvement of the water flow on the fins; thus, operation in heating mode is improved Standard blue coating treatment which improves the resistance of the coils to corrosive agents and is recommended in all those applications with a moderate risk of corrosion External Fan Single variable speed Brushless DC fan motor for optimum air distribution together with extraordinarily low sound levels. Possibility of setting two different maximum noise levels Electronic expansion valve The electronic expansion valve is an electronic biflow expansion device, whose task is to optimize the volume of the refrigerant fluid present in the circuit and consequently the overheating, preventing the return of the fluid in the liquid phase towards the compressor. This device further improves the high efficiency and reliability of the system, as it also allows you to work with very low condensing pressures throughout the working range. Solenoid valve Given the extensive working fields of the unit, the solenoid valve, completely managed by the unit, allows the compressor to work at always optimal temperature levels Plate heat exchangers Vertical type plate heat exchanger in AISI 316 stainless steel Integrated hydronic unit The hydronic module is always present and is supplied with a variable speed circulation pump, flow switch, 3 bar safety valve, expansion tank and inlet and outlet water temperature probes. It is possible to have the backup electric heater as an accessory. In domestic applications, it is possible to connect the inertial storage tank directly below the unit in order to reduce the space occupied inside the living areas to a minimum. All internal hydronic parts are insulated to reduce heat losses. The antifreeze program contains special functions which use the heat pump and backup heater (if available) to protect the whole system from freezing. When the temperature of the water flow in the system drops to a certain value, the unit will heat the water, either with the heat pump, electric heating tap or backup heater (if available). The frost protection function is deactivated only when the temperature rises up to a certain value Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M4 Product code : 3.032372 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 5.10 Heating COP with water set at 45 °C: 3.80 Heating COP with water set at 55 °C: 2.95 EER cooling with water set at 7 °C : 3.45 EER cooling with water set at 18 °C: 5.50 Performance   Heating Useful power in heating with water set at 35° C: 4.20 kW Useful power in heating with water set at 45° C: 4.30 kW Useful power in heating with water set at 55° C: 4.40 kW Heating temperature range : 12° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 4.70 kW Useful power in cooling with water set at 18 °C: 4.50 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 12 ~ 65°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 2300 W System expansion tank: 8 litres Rated Operating Current: 12A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 43° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 25.4 mm (1") M Return pipe diameter : 25.4 mm (1") M Dimensions and weight Dimensions (WxHxD): 1295x712x429 mm Weight : 86Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M14 Product code : 3.032376 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.60 Heating COP with water set at 45 °C: 3.60 Heating COP with water set at 55 °C: 2.95 EER cooling with water set at 7 °C : 2.50 EER cooling with water set at 18 °C: 3.61 Performance   Heating Useful power in heating with water set at 35° C: 14.50 kW Useful power in heating with water set at 45° C: 14.10 kW Useful power in heating with water set at 55° C: 13.80 kW Heating temperature range : 12° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 12.40 kW Useful power in cooling with water set at 18 °C: 13.50 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 12 ~ 65°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 5800 W System expansion tank: 8 litres Rated Operating Current: 26A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 43° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1385x865x526 mm Weight : 129Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M14-T Product code : 3.032379 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.60 Heating COP with water set at 45 °C: 3.60 Heating COP with water set at 55 °C: 2.95 EER cooling with water set at 7 °C : 2.50 EER cooling with water set at 18 °C: 3.61 Performance   Heating Useful power in heating with water set at 35° C: 14.50 kW Useful power in heating with water set at 45° C: 14.10 kW Useful power in heating with water set at 55° C: 13.80 kW Heating temperature range : 12° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 12.40 kW Useful power in cooling with water set at 18 °C: 13.50 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 12 ~ 65°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 5800 W System expansion tank: 8 litres Rated Operating Current: 11A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 43° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1385x865x526 mm Weight : 144Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS AVAILABLE ON ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M18-T Product code : 3.032381 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.70 Heating COP with water set at 45 °C: 3.50 Heating COP with water set at 55 °C: 2.75 EER cooling with water set at 7 °C : 3.05 EER cooling with water set at 18 °C : 4.75 Performance   Heating Useful power in heating with water set at 35° C: 18.00 kW Useful power in heating with water set at 45° C: 18.00 kW Useful power in heating with water set at 55° C: 18.00 kW Heating temperature range : 5° ~ 60° C Cooling down Useful power in cooling with water set at 7 °C: 17.00 kW Useful power in cooling with water set at 18 °C: 18.50 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 5 ~ 60°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 10600 W System expansion tank: 8 litres Rated Operating Current: 16.8A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 46° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1129x1558x528 mm Weight : 177Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less